Message ID | 1662004960-14071-4-git-send-email-hongxing.zhu@nxp.com |
---|---|
State | Superseded |
Headers | show |
Series | Add the iMX8MP PCIe support | expand |
Am Donnerstag, dem 01.09.2022 um 12:02 +0800 schrieb Richard Zhu: > Add PCIe support on i.MX8MP EVK board. > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> > Tested-by: Marek Vasut <marex@denx.de> > Tested-by: Richard Leitner <richard.leitner@skidata.com> > Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> > --- > arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 53 ++++++++++++++++++++ > 1 file changed, 53 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts > index f6b017ab5f53..9f1469db554d 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts > +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts > @@ -5,6 +5,7 @@ > > /dts-v1/; > > +#include <dt-bindings/phy/phy-imx8-pcie.h> > #include "imx8mp.dtsi" > > / { > @@ -33,6 +34,12 @@ memory@40000000 { > <0x1 0x00000000 0 0xc0000000>; > }; > > + pcie0_refclk: pcie0-refclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <100000000>; > + }; > + > reg_can1_stby: regulator-can1-stby { > compatible = "regulator-fixed"; > regulator-name = "can1-stby"; > @@ -55,6 +62,17 @@ reg_can2_stby: regulator-can2-stby { > enable-active-high; > }; > > + reg_pcie0: regulator-pcie { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pcie0_reg>; > + regulator-name = "MPCIE_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > reg_usdhc2_vmmc: regulator-usdhc2 { > compatible = "regulator-fixed"; > pinctrl-names = "default"; > @@ -350,6 +368,28 @@ &i2c5 { > */ > }; > > +&pcie_phy { > + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; > + clocks = <&pcie0_refclk>; > + clock-names = "ref"; > + status = "okay"; > +}; > + > +&pcie { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pcie0>; > + reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>; > + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, > + <&clk IMX8MP_CLK_PCIE_ROOT>, > + <&clk IMX8MP_CLK_HSIO_AXI>; > + clock-names = "pcie", "pcie_aux", "pcie_bus"; > + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; > + assigned-clock-rates = <10000000>; > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; > + vpcie-supply = <®_pcie0>; > + status = "okay"; > +}; > + > &snvs_pwrkey { > status = "okay"; > }; > @@ -502,6 +542,19 @@ MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c2 > >; > }; > > + pinctrl_pcie0: pcie0grp { > + fsl,pins = < > + MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B 0x61 /* open drain, pull up */ > + MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x41 > + >; > + }; > + > + pinctrl_pcie0_reg: pcie0reggrp { > + fsl,pins = < > + MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x41 > + >; > + }; > + > pinctrl_pmic: pmicgrp { > fsl,pins = < > MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x000001c0
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index f6b017ab5f53..9f1469db554d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/phy/phy-imx8-pcie.h> #include "imx8mp.dtsi" / { @@ -33,6 +34,12 @@ memory@40000000 { <0x1 0x00000000 0 0xc0000000>; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + reg_can1_stby: regulator-can1-stby { compatible = "regulator-fixed"; regulator-name = "can1-stby"; @@ -55,6 +62,17 @@ reg_can2_stby: regulator-can2-stby { enable-active-high; }; + reg_pcie0: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -350,6 +368,28 @@ &i2c5 { */ }; +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_PCIE_ROOT>, + <&clk IMX8MP_CLK_HSIO_AXI>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; + assigned-clock-rates = <10000000>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; + vpcie-supply = <®_pcie0>; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -502,6 +542,19 @@ MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c2 >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B 0x61 /* open drain, pull up */ + MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x41 + >; + }; + + pinctrl_pcie0_reg: pcie0reggrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x41 + >; + }; + pinctrl_pmic: pmicgrp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x000001c0