| Message ID | 20220902184543.1234835-1-pgwipeout@gmail.com |
|---|---|
| State | Accepted |
| Commit | f340ed8664a55a467850ec1689996e63d9ee971a |
| Headers | show |
| Series | [v4] phy: rockchip-inno-usb2: Return zero after otg sync | expand |
On 9/2/22 1:45 PM, Peter Geis wrote: > The otg sync state patch reuses the ret variable, but fails to set it to > zero after use. This leads to a situation when the otg port is in > peripheral mode where the otg phy aborts halfway through setup. It also > fails to account for a failure to register the extcon notifier. Fix this > by using our own variable and skipping otg sync in case of failure. > > Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state") > Reported-by: Markus Reichl <m.reichl@fivetechno.de> > Reported-by: Michael Riesch <michael.riesch@wolfvision.net> > Signed-off-by: Peter Geis <pgwipeout@gmail.com> > Tested-by: Michael Riesch <michael.riesch@wolfvision.net> > Tested-by: Markus Reichl <m.reichl@fivetechno.de> Reviewed-by: Samuel Holland <samuel@sholland.org>
On 02-09-22, 14:45, Peter Geis wrote: > The otg sync state patch reuses the ret variable, but fails to set it to > zero after use. This leads to a situation when the otg port is in > peripheral mode where the otg phy aborts halfway through setup. It also > fails to account for a failure to register the extcon notifier. Fix this > by using our own variable and skipping otg sync in case of failure. Applied, thanks
On Sun, Sep 4, 2022 at 11:24 PM Vinod Koul <vkoul@kernel.org> wrote: > > On 02-09-22, 14:45, Peter Geis wrote: > > The otg sync state patch reuses the ret variable, but fails to set it to > > zero after use. This leads to a situation when the otg port is in > > peripheral mode where the otg phy aborts halfway through setup. It also > > fails to account for a failure to register the extcon notifier. Fix this > > by using our own variable and skipping otg sync in case of failure. > > Applied, thanks This should have been applied for v6.0-rc, not -next. We now have a v6.0 release that doesn't boot properly on RK3399. ChenYu
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c index 0b1e9337ee8e..e6ededc51523 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, struct rockchip_usb2phy_port *rport, struct device_node *child_np) { - int ret; + int ret, id; rport->port_id = USB2PHY_PORT_OTG; rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG]; @@ -1162,13 +1162,15 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, ret = devm_extcon_register_notifier(rphy->dev, rphy->edev, EXTCON_USB_HOST, &rport->event_nb); - if (ret) + if (ret) { dev_err(rphy->dev, "register USB HOST notifier failed\n"); + goto out; + } if (!of_property_read_bool(rphy->dev->of_node, "extcon")) { /* do initial sync of usb state */ - ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); - extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret); + id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); + extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id); } }
The otg sync state patch reuses the ret variable, but fails to set it to zero after use. This leads to a situation when the otg port is in peripheral mode where the otg phy aborts halfway through setup. It also fails to account for a failure to register the extcon notifier. Fix this by using our own variable and skipping otg sync in case of failure. Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state") Reported-by: Markus Reichl <m.reichl@fivetechno.de> Reported-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Tested-by: Markus Reichl <m.reichl@fivetechno.de> --- Changelog: v4 - fix a checkpatch style error (thanks Vinod) v3 - add missing brackets around new goto v2 - switch to using our own variable - add missing goto to skip sync in case of registration failure --- drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)