diff mbox series

[wpan-next,v2,01/11] net: mac802154: Introduce filtering levels

Message ID 20220826144049.256134-2-miquel.raynal@bootlin.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series net: ieee802154: Support scanning/beaconing | expand

Checks

Context Check Description
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Miquel Raynal Aug. 26, 2022, 2:40 p.m. UTC
The 802154 specification details several filtering levels in which the
PHY and the MAC could be. The amount of filtering will vary if they are
in promiscuous mode or in scanning mode. Otherwise they are expected to
do some very basic checks, such as enforcing the frame validity. Either
the PHY is able to do so, and the MAC has nothing to do, or the PHY has
a lower filtering level than expected and the MAC should take over.

For now we define these levels in an enumeration, we add a per-PHY
parameter showing the PHY filtering level and we set it to a default
value. The drivers, if they cannot reach this level of filtering, should
overwrite this value so that it reflects what they do. Then, in the
core, this filtering level will be used to decide whether some
additional software processing is needed or not.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 include/net/cfg802154.h |  3 +++
 include/net/mac802154.h | 24 ++++++++++++++++++++++++
 net/mac802154/iface.c   |  2 ++
 3 files changed, 29 insertions(+)

Comments

Alexander Aring Sept. 4, 2022, 5:13 p.m. UTC | #1
Hi,

On Fri, Aug 26, 2022 at 10:41 AM Miquel Raynal
<miquel.raynal@bootlin.com> wrote:
>
> The 802154 specification details several filtering levels in which the
> PHY and the MAC could be. The amount of filtering will vary if they are
> in promiscuous mode or in scanning mode. Otherwise they are expected to
> do some very basic checks, such as enforcing the frame validity. Either
> the PHY is able to do so, and the MAC has nothing to do, or the PHY has
> a lower filtering level than expected and the MAC should take over.
>
> For now we define these levels in an enumeration, we add a per-PHY
> parameter showing the PHY filtering level and we set it to a default
> value. The drivers, if they cannot reach this level of filtering, should
> overwrite this value so that it reflects what they do. Then, in the
> core, this filtering level will be used to decide whether some
> additional software processing is needed or not.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
>  include/net/cfg802154.h |  3 +++
>  include/net/mac802154.h | 24 ++++++++++++++++++++++++
>  net/mac802154/iface.c   |  2 ++
>  3 files changed, 29 insertions(+)
>
> diff --git a/include/net/cfg802154.h b/include/net/cfg802154.h
> index 04b996895fc1..2f29e95da47a 100644
> --- a/include/net/cfg802154.h
> +++ b/include/net/cfg802154.h
> @@ -223,6 +223,9 @@ struct wpan_phy {
>         atomic_t hold_txs;
>         wait_queue_head_t sync_txq;
>
> +       /* Current filtering level on reception */
> +       unsigned long filtering;
> +

enum ieee802154_filtering_level?

>         char priv[] __aligned(NETDEV_ALIGN);
>  };
>
> diff --git a/include/net/mac802154.h b/include/net/mac802154.h
> index 357d25ef627a..41c28118790c 100644
> --- a/include/net/mac802154.h
> +++ b/include/net/mac802154.h
> @@ -130,6 +130,30 @@ enum ieee802154_hw_flags {
>  #define IEEE802154_HW_OMIT_CKSUM       (IEEE802154_HW_TX_OMIT_CKSUM | \
>                                          IEEE802154_HW_RX_OMIT_CKSUM)
>
> +/**
> + * enum ieee802154_filtering_level - Filtering levels applicable to a PHY
> + *
> + * @IEEE802154_FILTERING_NONE: No filtering at all, what is received is
> + *     forwarded to the softMAC
> + * @IEEE802154_FILTERING_1_FCS: First filtering level, frames with an invalid
> + *     FCS should be dropped
> + * @IEEE802154_FILTERING_2_PROMISCUOUS: Second filtering level, promiscuous
> + *     mode, identical in terms of filtering to the first level at the PHY
> + *     level, but no ACK should be transmitted automatically and at the MAC
> + *     level the frame should be forwarded to the upper layer directly

You have no ACK back in all filtering levels except in
IEEE802154_FILTERING_4_FRAME_FIELDS. It is some kind of mixed thing
between "receive mode and filtering mode" but I am fine with it.

> + * @IEEE802154_FILTERING_3_SCAN: Third filtering level, enforced during scans,
> + *     which only forwards beacons
> + * @IEEE802154_FILTERING_4_FRAME_FIELDS: Fourth filtering level actually
> + *     enforcing the validity of the content of the frame with various checks
> + */
> +enum ieee802154_filtering_level {
> +       IEEE802154_FILTERING_NONE,
> +       IEEE802154_FILTERING_1_FCS,
> +       IEEE802154_FILTERING_2_PROMISCUOUS,
> +       IEEE802154_FILTERING_3_SCAN,
> +       IEEE802154_FILTERING_4_FRAME_FIELDS,
> +};
> +
>  /* struct ieee802154_ops - callbacks from mac802154 to the driver
>   *
>   * This structure contains various callbacks that the driver may
> diff --git a/net/mac802154/iface.c b/net/mac802154/iface.c
> index 500ed1b81250..4bab2807acbe 100644
> --- a/net/mac802154/iface.c
> +++ b/net/mac802154/iface.c
> @@ -587,6 +587,7 @@ ieee802154_setup_sdata(struct ieee802154_sub_if_data *sdata,
>                 sdata->dev->netdev_ops = &mac802154_wpan_ops;
>                 sdata->dev->ml_priv = &mac802154_mlme_wpan;
>                 wpan_dev->promiscuous_mode = false;
> +               wpan_dev->wpan_phy->filtering = IEEE802154_FILTERING_4_FRAME_FIELDS;
>                 wpan_dev->header_ops = &ieee802154_header_ops;
>
>                 mutex_init(&sdata->sec_mtx);
> @@ -601,6 +602,7 @@ ieee802154_setup_sdata(struct ieee802154_sub_if_data *sdata,
>                 sdata->dev->needs_free_netdev = true;
>                 sdata->dev->netdev_ops = &mac802154_monitor_ops;
>                 wpan_dev->promiscuous_mode = true;
> +               wpan_dev->wpan_phy->filtering = IEEE802154_FILTERING_2_PROMISCUOUS;

In my opinion this is currently IEEE802154_FILTERING_NONE ?

- Alex
diff mbox series

Patch

diff --git a/include/net/cfg802154.h b/include/net/cfg802154.h
index 04b996895fc1..2f29e95da47a 100644
--- a/include/net/cfg802154.h
+++ b/include/net/cfg802154.h
@@ -223,6 +223,9 @@  struct wpan_phy {
 	atomic_t hold_txs;
 	wait_queue_head_t sync_txq;
 
+	/* Current filtering level on reception */
+	unsigned long filtering;
+
 	char priv[] __aligned(NETDEV_ALIGN);
 };
 
diff --git a/include/net/mac802154.h b/include/net/mac802154.h
index 357d25ef627a..41c28118790c 100644
--- a/include/net/mac802154.h
+++ b/include/net/mac802154.h
@@ -130,6 +130,30 @@  enum ieee802154_hw_flags {
 #define IEEE802154_HW_OMIT_CKSUM	(IEEE802154_HW_TX_OMIT_CKSUM | \
 					 IEEE802154_HW_RX_OMIT_CKSUM)
 
+/**
+ * enum ieee802154_filtering_level - Filtering levels applicable to a PHY
+ *
+ * @IEEE802154_FILTERING_NONE: No filtering at all, what is received is
+ *	forwarded to the softMAC
+ * @IEEE802154_FILTERING_1_FCS: First filtering level, frames with an invalid
+ *	FCS should be dropped
+ * @IEEE802154_FILTERING_2_PROMISCUOUS: Second filtering level, promiscuous
+ *	mode, identical in terms of filtering to the first level at the PHY
+ *	level, but no ACK should be transmitted automatically and at the MAC
+ *	level the frame should be forwarded to the upper layer directly
+ * @IEEE802154_FILTERING_3_SCAN: Third filtering level, enforced during scans,
+ *	which only forwards beacons
+ * @IEEE802154_FILTERING_4_FRAME_FIELDS: Fourth filtering level actually
+ *	enforcing the validity of the content of the frame with various checks
+ */
+enum ieee802154_filtering_level {
+	IEEE802154_FILTERING_NONE,
+	IEEE802154_FILTERING_1_FCS,
+	IEEE802154_FILTERING_2_PROMISCUOUS,
+	IEEE802154_FILTERING_3_SCAN,
+	IEEE802154_FILTERING_4_FRAME_FIELDS,
+};
+
 /* struct ieee802154_ops - callbacks from mac802154 to the driver
  *
  * This structure contains various callbacks that the driver may
diff --git a/net/mac802154/iface.c b/net/mac802154/iface.c
index 500ed1b81250..4bab2807acbe 100644
--- a/net/mac802154/iface.c
+++ b/net/mac802154/iface.c
@@ -587,6 +587,7 @@  ieee802154_setup_sdata(struct ieee802154_sub_if_data *sdata,
 		sdata->dev->netdev_ops = &mac802154_wpan_ops;
 		sdata->dev->ml_priv = &mac802154_mlme_wpan;
 		wpan_dev->promiscuous_mode = false;
+		wpan_dev->wpan_phy->filtering = IEEE802154_FILTERING_4_FRAME_FIELDS;
 		wpan_dev->header_ops = &ieee802154_header_ops;
 
 		mutex_init(&sdata->sec_mtx);
@@ -601,6 +602,7 @@  ieee802154_setup_sdata(struct ieee802154_sub_if_data *sdata,
 		sdata->dev->needs_free_netdev = true;
 		sdata->dev->netdev_ops = &mac802154_monitor_ops;
 		wpan_dev->promiscuous_mode = true;
+		wpan_dev->wpan_phy->filtering = IEEE802154_FILTERING_2_PROMISCUOUS;
 		break;
 	default:
 		BUG();