diff mbox series

[v7,5/7] soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets

Message ID 1662109086-15881-6-git-send-email-hongxing.zhu@nxp.com
State Superseded
Headers show
Series Add the iMX8MP PCIe support | expand

Commit Message

Hongxing Zhu Sept. 2, 2022, 8:58 a.m. UTC 
From: Lucas Stach <l.stach@pengutronix.de>

Dessert the PHY reset when powering up the domain and put it back
into reset when the domain is powered down.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/soc/imx/imx8mp-blk-ctrl.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Shawn Guo Sept. 5, 2022, 2:29 a.m. UTC | #1 
On Fri, Sep 02, 2022 at 04:58:04PM +0800, Richard Zhu wrote:
> From: Lucas Stach <l.stach@pengutronix.de>
> 
> Dessert the PHY reset when powering up the domain and put it back
> into reset when the domain is powered down.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>

Applied, thanks!
diff mbox series

Patch

diff --git a/drivers/soc/imx/imx8mp-blk-ctrl.c b/drivers/soc/imx/imx8mp-blk-ctrl.c
index 4ca2ede6871b..6c939d68ba9a 100644
--- a/drivers/soc/imx/imx8mp-blk-ctrl.c
+++ b/drivers/soc/imx/imx8mp-blk-ctrl.c
@@ -18,6 +18,8 @@ 
 #define GPR_REG0		0x0
 #define  PCIE_CLOCK_MODULE_EN	BIT(0)
 #define  USB_CLOCK_MODULE_EN	BIT(1)
+#define  PCIE_PHY_APB_RST	BIT(4)
+#define  PCIE_PHY_INIT_RST	BIT(5)
 
 struct imx8mp_blk_ctrl_domain;
 
@@ -75,6 +77,10 @@  static void imx8mp_hsio_blk_ctrl_power_on(struct imx8mp_blk_ctrl *bc,
 	case IMX8MP_HSIOBLK_PD_PCIE:
 		regmap_set_bits(bc->regmap, GPR_REG0, PCIE_CLOCK_MODULE_EN);
 		break;
+	case IMX8MP_HSIOBLK_PD_PCIE_PHY:
+		regmap_set_bits(bc->regmap, GPR_REG0,
+				PCIE_PHY_APB_RST | PCIE_PHY_INIT_RST);
+		break;
 	default:
 		break;
 	}
@@ -90,6 +96,10 @@  static void imx8mp_hsio_blk_ctrl_power_off(struct imx8mp_blk_ctrl *bc,
 	case IMX8MP_HSIOBLK_PD_PCIE:
 		regmap_clear_bits(bc->regmap, GPR_REG0, PCIE_CLOCK_MODULE_EN);
 		break;
+	case IMX8MP_HSIOBLK_PD_PCIE_PHY:
+		regmap_clear_bits(bc->regmap, GPR_REG0,
+				  PCIE_PHY_APB_RST | PCIE_PHY_INIT_RST);
+		break;
 	default:
 		break;
 	}