| Message ID | 20220903084440.1509562-1-bhupesh.sharma@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: qcom: sc8280xp-pmics: Remove reg entry for pmc8280c_lpg node | expand |
On 03/09/2022 11:44, Bhupesh Sharma wrote: > Commit eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") > dropped PWM reg declaration for pm8350c pwm(s), but there is a leftover > 'reg' entry inside the lpg/pwm node in sc8280xp dts file. Remove the same. > > While at it, also remove the unused unit address in the node > label. > > Fixes: eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") > Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > Cc: Bjorn Andersson <andersson@kernel.org> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi > index ae90b97aecb8..2e5cf55afdd5 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi > @@ -60,9 +60,8 @@ pmc8280c_gpios: gpio@8800 { > #interrupt-cells = <2>; > }; > > - pmc8280c_lpg: lpg@e800 { > + pmc8280c_lpg: lpg { I wonder why I did not see the errors when testing all DTSes for https://lore.kernel.org/all/20220828084341.112146-9-krzysztof.kozlowski@linaro.org/ Anyway, it cannot be lpg - binding requires "pwm". Best regards, Krzysztof Best regards, Krzysztof
Hi Krzysztof, On 9/5/22 12:52 AM, Krzysztof Kozlowski wrote: > On 03/09/2022 11:44, Bhupesh Sharma wrote: >> Commit eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") >> dropped PWM reg declaration for pm8350c pwm(s), but there is a leftover >> 'reg' entry inside the lpg/pwm node in sc8280xp dts file. Remove the same. >> >> While at it, also remove the unused unit address in the node >> label. >> >> Fixes: eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") >> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> >> Cc: Bjorn Andersson <andersson@kernel.org> >> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> >> --- >> arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 3 +-- >> 1 file changed, 1 insertion(+), 2 deletions(-) >> >> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi >> index ae90b97aecb8..2e5cf55afdd5 100644 >> --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi >> @@ -60,9 +60,8 @@ pmc8280c_gpios: gpio@8800 { >> #interrupt-cells = <2>; >> }; >> >> - pmc8280c_lpg: lpg@e800 { >> + pmc8280c_lpg: lpg { > > I wonder why I did not see the errors when testing all DTSes for > https://lore.kernel.org/all/20220828084341.112146-9-krzysztof.kozlowski@linaro.org/ I did not see the error while running the 'make dtbs_check' locally, so may be something to improve in 'make dtbs_check' infrastructure there. > Anyway, it cannot be lpg - binding requires "pwm". I think that should be a separate patch. It does not seem related to this change anyways - which fixes eeca7d46217c . I will send a v2 soon. Thanks, Bhupesh
On 05/09/2022 08:47, Bhupesh Sharma wrote: > Hi Krzysztof, > > On 9/5/22 12:52 AM, Krzysztof Kozlowski wrote: >> On 03/09/2022 11:44, Bhupesh Sharma wrote: >>> Commit eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") >>> dropped PWM reg declaration for pm8350c pwm(s), but there is a leftover >>> 'reg' entry inside the lpg/pwm node in sc8280xp dts file. Remove the same. >>> >>> While at it, also remove the unused unit address in the node >>> label. >>> >>> Fixes: eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") >>> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >>> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> >>> Cc: Bjorn Andersson <andersson@kernel.org> >>> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> >>> --- >>> arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 3 +-- >>> 1 file changed, 1 insertion(+), 2 deletions(-) >>> >>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi >>> index ae90b97aecb8..2e5cf55afdd5 100644 >>> --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi >>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi >>> @@ -60,9 +60,8 @@ pmc8280c_gpios: gpio@8800 { >>> #interrupt-cells = <2>; >>> }; >>> >>> - pmc8280c_lpg: lpg@e800 { >>> + pmc8280c_lpg: lpg { >> >> I wonder why I did not see the errors when testing all DTSes for >> https://lore.kernel.org/all/20220828084341.112146-9-krzysztof.kozlowski@linaro.org/ > > I did not see the error while running the 'make dtbs_check' locally, so > may be something to improve in 'make dtbs_check' infrastructure there. > >> Anyway, it cannot be lpg - binding requires "pwm". > > I think that should be a separate patch. It does not seem related to > this change anyways - which fixes eeca7d46217c . I will send a v2 soon. You would be changing same line twice and eeca7d46217c is not going to be backported, so I am no sure if there is benefit to make two patches. Best regards, Krzysztof
On 9/5/22 12:08 PM, Krzysztof Kozlowski wrote: > On 05/09/2022 08:47, Bhupesh Sharma wrote: >> Hi Krzysztof, >> >> On 9/5/22 12:52 AM, Krzysztof Kozlowski wrote: >>> On 03/09/2022 11:44, Bhupesh Sharma wrote: >>>> Commit eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") >>>> dropped PWM reg declaration for pm8350c pwm(s), but there is a leftover >>>> 'reg' entry inside the lpg/pwm node in sc8280xp dts file. Remove the same. >>>> >>>> While at it, also remove the unused unit address in the node >>>> label. >>>> >>>> Fixes: eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") >>>> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >>>> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> >>>> Cc: Bjorn Andersson <andersson@kernel.org> >>>> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> >>>> --- >>>> arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 3 +-- >>>> 1 file changed, 1 insertion(+), 2 deletions(-) >>>> >>>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi >>>> index ae90b97aecb8..2e5cf55afdd5 100644 >>>> --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi >>>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi >>>> @@ -60,9 +60,8 @@ pmc8280c_gpios: gpio@8800 { >>>> #interrupt-cells = <2>; >>>> }; >>>> >>>> - pmc8280c_lpg: lpg@e800 { >>>> + pmc8280c_lpg: lpg { >>> >>> I wonder why I did not see the errors when testing all DTSes for >>> https://lore.kernel.org/all/20220828084341.112146-9-krzysztof.kozlowski@linaro.org/ >> >> I did not see the error while running the 'make dtbs_check' locally, so >> may be something to improve in 'make dtbs_check' infrastructure there. >> >>> Anyway, it cannot be lpg - binding requires "pwm". >> >> I think that should be a separate patch. It does not seem related to >> this change anyways - which fixes eeca7d46217c . I will send a v2 soon. > > You would be changing same line twice and eeca7d46217c is not going to > be backported, so I am no sure if there is benefit to make two patches. Ok. v2 sent accordingly (https://lore.kernel.org/linux-arm-msm/20220905070240.1634997-1-bhupesh.sharma@linaro.org/) Please help review. Thanks.
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index ae90b97aecb8..2e5cf55afdd5 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -60,9 +60,8 @@ pmc8280c_gpios: gpio@8800 { #interrupt-cells = <2>; }; - pmc8280c_lpg: lpg@e800 { + pmc8280c_lpg: lpg { compatible = "qcom,pm8350c-pwm"; - reg = <0xe800>; #address-cells = <1>; #size-cells = <0>;
Commit eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") dropped PWM reg declaration for pm8350c pwm(s), but there is a leftover 'reg' entry inside the lpg/pwm node in sc8280xp dts file. Remove the same. While at it, also remove the unused unit address in the node label. Fixes: eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)