| Message ID | 20220708115619.254073-1-kavyasree.kotagiri@microchip.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support for lan966x flexcom chip-select configuration | expand |
Hi Lee, Are you planning to take this patch series for 6.1 or Can we include them through arm-soc pull-request? Thanks, Kavya > -----Original Message----- > From: Kavyasree Kotagiri [mailto:kavyasree.kotagiri@microchip.com] > Sent: Friday, July 8, 2022 5:26 PM > To: robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; Nicolas Ferre - > M43238 <Nicolas.Ferre@microchip.com>; alexandre.belloni@bootlin.com; > Claudiu Beznea - M18063 <Claudiu.Beznea@microchip.com>; > UNGLinuxDriver <UNGLinuxDriver@microchip.com> > Cc: devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux- > kernel@vger.kernel.org; Kavyasree Kotagiri - I30978 > <Kavyasree.Kotagiri@microchip.com> > Subject: [PATCH v8 0/3] Add support for lan966x flexcom chip-select > configuration > > This patch series converts atmel-flexcom bindings into json-schema format. > Adds support for lan966x flexcom chip-select configurations and its > DT bindings. > > v7 -> v8: > - Added back patternProperties for child nodes. > - Changed compatible string to microchip,lan9668-flexcom. > > v6 -> v7: > - Change filename to atmel,sama5d2-flexcom.yaml > - Add #address-cells, #size-cells to flexcom node - Fixed warnings. > > v5 -> v6: > - Removed spi node from example as suggested by Rob and > also pattern properties(spi dt-bindings conversion to yaml patch is under > review). > https://patchwork.kernel.org/project/linux-arm- > kernel/patch/20220629125804.137099-1-sergiu.moga@microchip.com/ > Once this is accepted, I will add back spi example through new patch. > > v4 -> v5: > - Fix indentations of DT example. > - Fix dt-schema errors - removed minItems, maxItems for allOf:if:then > "reg" property as it is not required. > > v3 -> v4: > - Fix dtschema errors. > - Add a condition to flexcom chip-selects configuration as chip-select > lines are optional. > > v2 -> v3: > - changed IRQ flag in dt-bindings example. > - added reg property specific to lan66x which is missed in v2. > - used goto label for clk_disable in error cases. > > v1 -> v2: > - minor fix in title of dt-bindings. > - Modified new dt properties usage in atmel,flexcom.yaml. > - Used GENMASK and macros for maximum allowed values. > - Use u32 values for flexcom chipselects instead of strings. > - disable clock in case of errors. > > Kavyasree Kotagiri (3): > dt-bindings: mfd: Convert atmel-flexcom to json-schema > dt-bindings: mfd: atmel,sama5d2-flexcom: Add new compatible string for > lan966x > mfd: atmel-flexcom: Add support for lan966x flexcom chip-select > configuration > > .../bindings/mfd/atmel,sama5d2-flexcom.yaml | 155 ++++++++++++++++++ > .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------- > drivers/mfd/atmel-flexcom.c | 94 ++++++++++- > 3 files changed, 248 insertions(+), 64 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml > delete mode 100644 Documentation/devicetree/bindings/mfd/atmel- > flexcom.txt > > -- > 2.25.1
On Mon, 05 Sep 2022, Kavyasree.Kotagiri@microchip.com wrote: > Hi Lee, > > Are you planning to take this patch series for 6.1 or Can we include them through arm-soc pull-request? I don't seem to have visibility. Have I Acked it already? BTW, this is my old email address. Please use the one in my signature instead. > > -----Original Message----- > > From: Kavyasree Kotagiri [mailto:kavyasree.kotagiri@microchip.com] > > Sent: Friday, July 8, 2022 5:26 PM > > To: robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; Nicolas Ferre - > > M43238 <Nicolas.Ferre@microchip.com>; alexandre.belloni@bootlin.com; > > Claudiu Beznea - M18063 <Claudiu.Beznea@microchip.com>; > > UNGLinuxDriver <UNGLinuxDriver@microchip.com> > > Cc: devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux- > > kernel@vger.kernel.org; Kavyasree Kotagiri - I30978 > > <Kavyasree.Kotagiri@microchip.com> > > Subject: [PATCH v8 0/3] Add support for lan966x flexcom chip-select > > configuration > > > > This patch series converts atmel-flexcom bindings into json-schema format. > > Adds support for lan966x flexcom chip-select configurations and its > > DT bindings. > > > > v7 -> v8: > > - Added back patternProperties for child nodes. > > - Changed compatible string to microchip,lan9668-flexcom. > > > > v6 -> v7: > > - Change filename to atmel,sama5d2-flexcom.yaml > > - Add #address-cells, #size-cells to flexcom node - Fixed warnings. > > > > v5 -> v6: > > - Removed spi node from example as suggested by Rob and > > also pattern properties(spi dt-bindings conversion to yaml patch is under > > review). > > https://patchwork.kernel.org/project/linux-arm- > > kernel/patch/20220629125804.137099-1-sergiu.moga@microchip.com/ > > Once this is accepted, I will add back spi example through new patch. > > > > v4 -> v5: > > - Fix indentations of DT example. > > - Fix dt-schema errors - removed minItems, maxItems for allOf:if:then > > "reg" property as it is not required. > > > > v3 -> v4: > > - Fix dtschema errors. > > - Add a condition to flexcom chip-selects configuration as chip-select > > lines are optional. > > > > v2 -> v3: > > - changed IRQ flag in dt-bindings example. > > - added reg property specific to lan66x which is missed in v2. > > - used goto label for clk_disable in error cases. > > > > v1 -> v2: > > - minor fix in title of dt-bindings. > > - Modified new dt properties usage in atmel,flexcom.yaml. > > - Used GENMASK and macros for maximum allowed values. > > - Use u32 values for flexcom chipselects instead of strings. > > - disable clock in case of errors. > > > > Kavyasree Kotagiri (3): > > dt-bindings: mfd: Convert atmel-flexcom to json-schema > > dt-bindings: mfd: atmel,sama5d2-flexcom: Add new compatible string for > > lan966x > > mfd: atmel-flexcom: Add support for lan966x flexcom chip-select > > configuration > > > > .../bindings/mfd/atmel,sama5d2-flexcom.yaml | 155 ++++++++++++++++++ > > .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------- > > drivers/mfd/atmel-flexcom.c | 94 ++++++++++- > > 3 files changed, 248 insertions(+), 64 deletions(-) > > create mode 100644 > > Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml > > delete mode 100644 Documentation/devicetree/bindings/mfd/atmel- > > flexcom.txt > > >
> > > Hi Lee, > > > > Are you planning to take this patch series for 6.1 or Can we include them > through arm-soc pull-request? > > I don't seem to have visibility. > Please find the patches below: https://lore.kernel.org/lkml/20220708115619.254073-1-kavyasree.kotagiri@microchip.com/T/ > Have I Acked it already? > No. > BTW, this is my old email address. > > Please use the one in my signature instead. > > > > -----Original Message----- > > > From: Kavyasree Kotagiri [mailto:kavyasree.kotagiri@microchip.com] > > > Sent: Friday, July 8, 2022 5:26 PM > > > To: robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; Nicolas > Ferre - > > > M43238 <Nicolas.Ferre@microchip.com>; > alexandre.belloni@bootlin.com; > > > Claudiu Beznea - M18063 <Claudiu.Beznea@microchip.com>; > > > UNGLinuxDriver <UNGLinuxDriver@microchip.com> > > > Cc: devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > linux- > > > kernel@vger.kernel.org; Kavyasree Kotagiri - I30978 > > > <Kavyasree.Kotagiri@microchip.com> > > > Subject: [PATCH v8 0/3] Add support for lan966x flexcom chip-select > > > configuration > > > > > > This patch series converts atmel-flexcom bindings into json-schema > format. > > > Adds support for lan966x flexcom chip-select configurations and its > > > DT bindings. > > > > > > v7 -> v8: > > > - Added back patternProperties for child nodes. > > > - Changed compatible string to microchip,lan9668-flexcom. > > > > > > v6 -> v7: > > > - Change filename to atmel,sama5d2-flexcom.yaml > > > - Add #address-cells, #size-cells to flexcom node - Fixed warnings. > > > > > > v5 -> v6: > > > - Removed spi node from example as suggested by Rob and > > > also pattern properties(spi dt-bindings conversion to yaml patch is > under > > > review). > > > https://patchwork.kernel.org/project/linux-arm- > > > kernel/patch/20220629125804.137099-1-sergiu.moga@microchip.com/ > > > Once this is accepted, I will add back spi example through new patch. > > > > > > v4 -> v5: > > > - Fix indentations of DT example. > > > - Fix dt-schema errors - removed minItems, maxItems for allOf:if:then > > > "reg" property as it is not required. > > > > > > v3 -> v4: > > > - Fix dtschema errors. > > > - Add a condition to flexcom chip-selects configuration as chip-select > > > lines are optional. > > > > > > v2 -> v3: > > > - changed IRQ flag in dt-bindings example. > > > - added reg property specific to lan66x which is missed in v2. > > > - used goto label for clk_disable in error cases. > > > > > > v1 -> v2: > > > - minor fix in title of dt-bindings. > > > - Modified new dt properties usage in atmel,flexcom.yaml. > > > - Used GENMASK and macros for maximum allowed values. > > > - Use u32 values for flexcom chipselects instead of strings. > > > - disable clock in case of errors. > > > > > > Kavyasree Kotagiri (3): > > > dt-bindings: mfd: Convert atmel-flexcom to json-schema > > > dt-bindings: mfd: atmel,sama5d2-flexcom: Add new compatible string > for > > > lan966x > > > mfd: atmel-flexcom: Add support for lan966x flexcom chip-select > > > configuration > > > > > > .../bindings/mfd/atmel,sama5d2-flexcom.yaml | 155 > ++++++++++++++++++ > > > .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------- > > > drivers/mfd/atmel-flexcom.c | 94 ++++++++++- > > > 3 files changed, 248 insertions(+), 64 deletions(-) > > > create mode 100644 > > > Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml > > > delete mode 100644 Documentation/devicetree/bindings/mfd/atmel- > > > flexcom.txt > > > > > > > -- > DEPRECATED: Please use lee@kernel.org
On Wed, 07 Sep 2022, Kavyasree.Kotagiri@microchip.com wrote: > > > > > Hi Lee, > > > > > > Are you planning to take this patch series for 6.1 or Can we include them > > through arm-soc pull-request? > > > > I don't seem to have visibility. > > > Please find the patches below: > https://lore.kernel.org/lkml/20220708115619.254073-1-kavyasree.kotagiri@microchip.com/T/ I need patches in my inbox to apply them. > > Have I Acked it already? > > > No. Then please submit a [RESEND] - with the full Cc list this time.
This patch series converts atmel-flexcom bindings into json-schema format. Adds support for lan966x flexcom chip-select configurations and its DT bindings. v7 -> v8: - Added back patternProperties for child nodes. - Changed compatible string to microchip,lan9668-flexcom. v6 -> v7: - Change filename to atmel,sama5d2-flexcom.yaml - Add #address-cells, #size-cells to flexcom node - Fixed warnings. v5 -> v6: - Removed spi node from example as suggested by Rob and also pattern properties(spi dt-bindings conversion to yaml patch is under review). https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220629125804.137099-1-sergiu.moga@microchip.com/ Once this is accepted, I will add back spi example through new patch. v4 -> v5: - Fix indentations of DT example. - Fix dt-schema errors - removed minItems, maxItems for allOf:if:then "reg" property as it is not required. v3 -> v4: - Fix dtschema errors. - Add a condition to flexcom chip-selects configuration as chip-select lines are optional. v2 -> v3: - changed IRQ flag in dt-bindings example. - added reg property specific to lan66x which is missed in v2. - used goto label for clk_disable in error cases. v1 -> v2: - minor fix in title of dt-bindings. - Modified new dt properties usage in atmel,flexcom.yaml. - Used GENMASK and macros for maximum allowed values. - Use u32 values for flexcom chipselects instead of strings. - disable clock in case of errors. Kavyasree Kotagiri (3): dt-bindings: mfd: Convert atmel-flexcom to json-schema dt-bindings: mfd: atmel,sama5d2-flexcom: Add new compatible string for lan966x mfd: atmel-flexcom: Add support for lan966x flexcom chip-select configuration .../bindings/mfd/atmel,sama5d2-flexcom.yaml | 155 ++++++++++++++++++ .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------- drivers/mfd/atmel-flexcom.c | 94 ++++++++++- 3 files changed, 248 insertions(+), 64 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt