| Message ID | 20220908150658.1839520-4-kavyasree.kotagiri@microchip.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for lan966x flexcom chip-select configuration | expand |
> Subject: [RESEND PATCH v9 3/3] mfd: atmel-flexcom: Add support for > lan966x flexcom chip-select configuration > > LAN966x SoC have 5 flexcoms. Each flexcom has 2 chip-selects > which are optional I/O lines. For each chip select of each > flexcom there is a configuration register FLEXCOM_SHARED[0-4]:SS_MASK[0- > 1]. > The width of configuration register is 21 because there are > 21 shared pins on each of which the chip select can be mapped. > Each bit of the register represents a different FLEXCOM_SHARED pin. > > Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> Missed adding tag - Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> > --- > v8 -> v9: > - No changes. > > v7 -> v8: > - Changed compatible string to microchip,lan9668-flexcom. > > v6 -> v7: > - No changes. > > v5 -> v6: > - No changes. > > v4 -> v5: > - No changes. > > v3 -> v4: > - Add condition for a flexcom whether to configure chip-select lines > or not, based on "microchip,flx-shrd-pins" property existence because > chip-select lines are optional. > > v2 -> v3: > - used goto label for clk_disable in error cases. > > v1 -> v2: > - use GENMASK for mask, macros for maximum allowed values. > - use u32 values for flexcom chipselects instead of strings. > - disable clock in case of errors. > > drivers/mfd/atmel-flexcom.c | 94 > ++++++++++++++++++++++++++++++++++++- > 1 file changed, 93 insertions(+), 1 deletion(-) > > diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c > index 33caa4fba6af..92ea15d5fd72 100644 > --- a/drivers/mfd/atmel-flexcom.c > +++ b/drivers/mfd/atmel-flexcom.c > @@ -28,15 +28,68 @@ > #define FLEX_MR_OPMODE(opmode) (((opmode) << > FLEX_MR_OPMODE_OFFSET) & \ > FLEX_MR_OPMODE_MASK) > > +/* LAN966x flexcom shared register offsets */ > +#define FLEX_SHRD_SS_MASK_0 0x0 > +#define FLEX_SHRD_SS_MASK_1 0x4 > +#define FLEX_SHRD_PIN_MAX 20 > +#define FLEX_CS_MAX 1 > +#define FLEX_SHRD_MASK GENMASK(20, 0) > + > +struct atmel_flex_caps { > + bool has_flx_cs; > +}; > + > struct atmel_flexcom { > void __iomem *base; > + void __iomem *flexcom_shared_base; > u32 opmode; > struct clk *clk; > }; > > +static int atmel_flexcom_lan966x_cs_config(struct platform_device *pdev) > +{ > + struct atmel_flexcom *ddata = dev_get_drvdata(&pdev->dev); > + struct device_node *np = pdev->dev.of_node; > + u32 flx_shrd_pins[2], flx_cs[2], val; > + int err, i, count; > + > + count = of_property_count_u32_elems(np, "microchip,flx-shrd- > pins"); > + if (count <= 0 || count > 2) { > + dev_err(&pdev->dev, "Invalid %s property (%d)\n", "flx-shrd- > pins", > + count); > + return -EINVAL; > + } > + > + err = of_property_read_u32_array(np, "microchip,flx-shrd-pins", > flx_shrd_pins, count); > + if (err) > + return err; > + > + err = of_property_read_u32_array(np, "microchip,flx-cs", flx_cs, > count); > + if (err) > + return err; > + > + for (i = 0; i < count; i++) { > + if (flx_shrd_pins[i] > FLEX_SHRD_PIN_MAX) > + return -EINVAL; > + > + if (flx_cs[i] > FLEX_CS_MAX) > + return -EINVAL; > + > + val = ~(1 << flx_shrd_pins[i]) & FLEX_SHRD_MASK; > + > + if (flx_cs[i] == 0) > + writel(val, ddata->flexcom_shared_base + > FLEX_SHRD_SS_MASK_0); > + else > + writel(val, ddata->flexcom_shared_base + > FLEX_SHRD_SS_MASK_1); > + } > + > + return 0; > +} > + > static int atmel_flexcom_probe(struct platform_device *pdev) > { > struct device_node *np = pdev->dev.of_node; > + const struct atmel_flex_caps *caps; > struct resource *res; > struct atmel_flexcom *ddata; > int err; > @@ -76,13 +129,52 @@ static int atmel_flexcom_probe(struct > platform_device *pdev) > */ > writel(FLEX_MR_OPMODE(ddata->opmode), ddata->base + > FLEX_MR); > > + caps = of_device_get_match_data(&pdev->dev); > + if (!caps) { > + dev_err(&pdev->dev, "Could not retrieve flexcom caps\n"); > + err = -EINVAL; > + goto clk_disable; > + } > + > + if (caps->has_flx_cs && of_property_read_bool(np, "microchip,flx- > shrd-pins")) { > + ddata->flexcom_shared_base = > devm_platform_get_and_ioremap_resource(pdev, 1, NULL); > + if (IS_ERR(ddata->flexcom_shared_base)) { > + err = dev_err_probe(&pdev->dev, > + PTR_ERR(ddata- > >flexcom_shared_base), > + "failed to get flexcom shared base > address\n"); > + goto clk_disable; > + } > + > + err = atmel_flexcom_lan966x_cs_config(pdev); > + if (err) > + goto clk_disable; > + } > + > +clk_disable: > clk_disable_unprepare(ddata->clk); > + if (err) > + return err; > > return devm_of_platform_populate(&pdev->dev); > } > > +static const struct atmel_flex_caps atmel_flexcom_caps = {}; > + > +static const struct atmel_flex_caps lan966x_flexcom_caps = { > + .has_flx_cs = true, > +}; > + > static const struct of_device_id atmel_flexcom_of_match[] = { > - { .compatible = "atmel,sama5d2-flexcom" }, > + { > + .compatible = "atmel,sama5d2-flexcom", > + .data = &atmel_flexcom_caps, > + }, > + > + { > + .compatible = "microchip,lan9668-flexcom", > + .data = &lan966x_flexcom_caps, > + }, > + > { /* sentinel */ } > }; > MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match); > -- > 2.25.1
diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c index 33caa4fba6af..92ea15d5fd72 100644 --- a/drivers/mfd/atmel-flexcom.c +++ b/drivers/mfd/atmel-flexcom.c @@ -28,15 +28,68 @@ #define FLEX_MR_OPMODE(opmode) (((opmode) << FLEX_MR_OPMODE_OFFSET) & \ FLEX_MR_OPMODE_MASK) +/* LAN966x flexcom shared register offsets */ +#define FLEX_SHRD_SS_MASK_0 0x0 +#define FLEX_SHRD_SS_MASK_1 0x4 +#define FLEX_SHRD_PIN_MAX 20 +#define FLEX_CS_MAX 1 +#define FLEX_SHRD_MASK GENMASK(20, 0) + +struct atmel_flex_caps { + bool has_flx_cs; +}; + struct atmel_flexcom { void __iomem *base; + void __iomem *flexcom_shared_base; u32 opmode; struct clk *clk; }; +static int atmel_flexcom_lan966x_cs_config(struct platform_device *pdev) +{ + struct atmel_flexcom *ddata = dev_get_drvdata(&pdev->dev); + struct device_node *np = pdev->dev.of_node; + u32 flx_shrd_pins[2], flx_cs[2], val; + int err, i, count; + + count = of_property_count_u32_elems(np, "microchip,flx-shrd-pins"); + if (count <= 0 || count > 2) { + dev_err(&pdev->dev, "Invalid %s property (%d)\n", "flx-shrd-pins", + count); + return -EINVAL; + } + + err = of_property_read_u32_array(np, "microchip,flx-shrd-pins", flx_shrd_pins, count); + if (err) + return err; + + err = of_property_read_u32_array(np, "microchip,flx-cs", flx_cs, count); + if (err) + return err; + + for (i = 0; i < count; i++) { + if (flx_shrd_pins[i] > FLEX_SHRD_PIN_MAX) + return -EINVAL; + + if (flx_cs[i] > FLEX_CS_MAX) + return -EINVAL; + + val = ~(1 << flx_shrd_pins[i]) & FLEX_SHRD_MASK; + + if (flx_cs[i] == 0) + writel(val, ddata->flexcom_shared_base + FLEX_SHRD_SS_MASK_0); + else + writel(val, ddata->flexcom_shared_base + FLEX_SHRD_SS_MASK_1); + } + + return 0; +} + static int atmel_flexcom_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; + const struct atmel_flex_caps *caps; struct resource *res; struct atmel_flexcom *ddata; int err; @@ -76,13 +129,52 @@ static int atmel_flexcom_probe(struct platform_device *pdev) */ writel(FLEX_MR_OPMODE(ddata->opmode), ddata->base + FLEX_MR); + caps = of_device_get_match_data(&pdev->dev); + if (!caps) { + dev_err(&pdev->dev, "Could not retrieve flexcom caps\n"); + err = -EINVAL; + goto clk_disable; + } + + if (caps->has_flx_cs && of_property_read_bool(np, "microchip,flx-shrd-pins")) { + ddata->flexcom_shared_base = devm_platform_get_and_ioremap_resource(pdev, 1, NULL); + if (IS_ERR(ddata->flexcom_shared_base)) { + err = dev_err_probe(&pdev->dev, + PTR_ERR(ddata->flexcom_shared_base), + "failed to get flexcom shared base address\n"); + goto clk_disable; + } + + err = atmel_flexcom_lan966x_cs_config(pdev); + if (err) + goto clk_disable; + } + +clk_disable: clk_disable_unprepare(ddata->clk); + if (err) + return err; return devm_of_platform_populate(&pdev->dev); } +static const struct atmel_flex_caps atmel_flexcom_caps = {}; + +static const struct atmel_flex_caps lan966x_flexcom_caps = { + .has_flx_cs = true, +}; + static const struct of_device_id atmel_flexcom_of_match[] = { - { .compatible = "atmel,sama5d2-flexcom" }, + { + .compatible = "atmel,sama5d2-flexcom", + .data = &atmel_flexcom_caps, + }, + + { + .compatible = "microchip,lan9668-flexcom", + .data = &lan966x_flexcom_caps, + }, + { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match);
LAN966x SoC have 5 flexcoms. Each flexcom has 2 chip-selects which are optional I/O lines. For each chip select of each flexcom there is a configuration register FLEXCOM_SHARED[0-4]:SS_MASK[0-1]. The width of configuration register is 21 because there are 21 shared pins on each of which the chip select can be mapped. Each bit of the register represents a different FLEXCOM_SHARED pin. Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> --- v8 -> v9: - No changes. v7 -> v8: - Changed compatible string to microchip,lan9668-flexcom. v6 -> v7: - No changes. v5 -> v6: - No changes. v4 -> v5: - No changes. v3 -> v4: - Add condition for a flexcom whether to configure chip-select lines or not, based on "microchip,flx-shrd-pins" property existence because chip-select lines are optional. v2 -> v3: - used goto label for clk_disable in error cases. v1 -> v2: - use GENMASK for mask, macros for maximum allowed values. - use u32 values for flexcom chipselects instead of strings. - disable clock in case of errors. drivers/mfd/atmel-flexcom.c | 94 ++++++++++++++++++++++++++++++++++++- 1 file changed, 93 insertions(+), 1 deletion(-)