| Message ID | 20220826065621.2255795-1-judyhsiao@chromium.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [v4] arm64: dts: qcom: sc7280: Fix Dmic no sound on villager-r1 | expand |
Hi, On Thu, Aug 25, 2022 at 11:56 PM Judy Hsiao <judyhsiao@chromium.org> wrote: > > Fix the DMIC no sound issue of villager-r1 by using "PP1800_L2C" as the > DMIC power source to match the hardware schematic. > > This patch: > 1. set vdd-micb-supply to PP1800_L2C as the MIC Bias voltage regulator. > 2. In audio-routing, set VA DMIC01~VA DMIC03 to use the vdd-micb-supply > setting. > > Co-developed-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> > --- > Changes since V3: > -- Update the commit message and fix extra blank line. > Changes since V2: > -- Update the commit message. > Changes since V1: > -- Update the commit message. > > This patch depends on: > arm64: dts: qcom: sc7280: Add herobrine-villager-r1. [1] > > [1] https://patchwork.kernel.org/patch/12929106 After applying your [1] then your patch applies without merge conflicts. However, it still doesn't compile. You also depend on whatever patch adds the nodes "lpass_va_macro" and "sound" since you're referencing them in your patch. I haven't been keeping track of the latest status of all the audio patches, so I myself can't point to exactly what patches you depend on and whether those patches are ready to land. In any case, the contents of this patch seem OK assuming the dependent patches cause something that looks like the current (downstream) chromeos-5.15 tree. Reviewed-by: Douglas Anderson <dianders@chromium.org>
Quoting Judy Hsiao (2022-08-25 23:56:21) > Fix the DMIC no sound issue of villager-r1 by using "PP1800_L2C" as the > DMIC power source to match the hardware schematic. > > This patch: > 1. set vdd-micb-supply to PP1800_L2C as the MIC Bias voltage regulator. > 2. In audio-routing, set VA DMIC01~VA DMIC03 to use the vdd-micb-supply > setting. > > Co-developed-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> > diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts > index c03b3ae4de50..fd202a8f6a33 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts > +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts > @@ -12,3 +12,30 @@ / { > model = "Google Villager (rev1+)"; > compatible = "google,villager", "qcom,sc7280"; > }; > + > +&lpass_va_macro { > + vdd-micb-supply = <&pp1800_l2c>; > +}; I wonder if we'll want to move this to some common "lpass audio" mixin dtsi file, but we can do that later.
On Fri, Aug 26, 2022 at 10:14:58AM -0700, Doug Anderson wrote: > Hi, > > On Thu, Aug 25, 2022 at 11:56 PM Judy Hsiao <judyhsiao@chromium.org> wrote: > > > > Fix the DMIC no sound issue of villager-r1 by using "PP1800_L2C" as the > > DMIC power source to match the hardware schematic. > > > > This patch: > > 1. set vdd-micb-supply to PP1800_L2C as the MIC Bias voltage regulator. > > 2. In audio-routing, set VA DMIC01~VA DMIC03 to use the vdd-micb-supply > > setting. > > > > Co-developed-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > > Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > > Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> > > --- > > Changes since V3: > > -- Update the commit message and fix extra blank line. > > Changes since V2: > > -- Update the commit message. > > Changes since V1: > > -- Update the commit message. > > > > This patch depends on: > > arm64: dts: qcom: sc7280: Add herobrine-villager-r1. [1] > > > > [1] https://patchwork.kernel.org/patch/12929106 > > After applying your [1] then your patch applies without merge > conflicts. However, it still doesn't compile. You also depend on > whatever patch adds the nodes "lpass_va_macro" and "sound" since > you're referencing them in your patch. I haven't been keeping track of > the latest status of all the audio patches, so I myself can't point to > exactly what patches you depend on and whether those patches are ready > to land. > > In any case, the contents of this patch seem OK assuming the dependent > patches cause something that looks like the current (downstream) > chromeos-5.15 tree. > > Reviewed-by: Douglas Anderson <dianders@chromium.org> To my best knowledge the dependencies of the audio mess are (roughly in order): Add support for audio clock gating resets for SC7280 (v8) https://patchwork.kernel.org/project/linux-arm-msm/list/?series=671887 ready to land? (patch 2 has a minor comment about SoB tag) Add DT support for audio clock gating resets for SC7280 (v4) https://patchwork.kernel.org/project/linux-arm-msm/list/?series=666480 ready to land after dependencies land Add soundcard support for sc7280 based platforms (v14) https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657417 ready to land after dependencies land Add dtsi for sc7280 herobrine boards that using rt5682 codec (v3) https://patchwork.kernel.org/project/linux-arm-msm/list/?series=644812 ready to land after dependencies land Add new board revision and LTE SKUs for sc7280-villager family (v8) https://patchwork.kernel.org/project/linux-arm-msm/list/?series=663014 ready to land after dependencies land arm64: dts: qcom: sc7280: Fix Dmic no sound on villager-r1 (v4) https://patchwork.kernel.org/project/linux-arm-msm/patch/20220826065621.2255795-1-judyhsiao@chromium.org/ ready to land after dependencies land So it looks like things are generally ready to land, unless [1] needs a re-spin to fix the SoB tag. m. [1] https://patchwork.kernel.org/project/linux-arm-msm/patch/1661754153-14813-3-git-send-email-quic_c_skakit@quicinc.com/
On Mon, Aug 29, 2022 at 03:20:53PM -0700, Matthias Kaehlcke wrote: > On Fri, Aug 26, 2022 at 10:14:58AM -0700, Doug Anderson wrote: > > Hi, > > > > On Thu, Aug 25, 2022 at 11:56 PM Judy Hsiao <judyhsiao@chromium.org> wrote: > > > > > > Fix the DMIC no sound issue of villager-r1 by using "PP1800_L2C" as the > > > DMIC power source to match the hardware schematic. > > > > > > This patch: > > > 1. set vdd-micb-supply to PP1800_L2C as the MIC Bias voltage regulator. > > > 2. In audio-routing, set VA DMIC01~VA DMIC03 to use the vdd-micb-supply > > > setting. > > > > > > Co-developed-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > > > Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > > > Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> > > > --- > > > Changes since V3: > > > -- Update the commit message and fix extra blank line. > > > Changes since V2: > > > -- Update the commit message. > > > Changes since V1: > > > -- Update the commit message. > > > > > > This patch depends on: > > > arm64: dts: qcom: sc7280: Add herobrine-villager-r1. [1] > > > > > > [1] https://patchwork.kernel.org/patch/12929106 > > > > After applying your [1] then your patch applies without merge > > conflicts. However, it still doesn't compile. You also depend on > > whatever patch adds the nodes "lpass_va_macro" and "sound" since > > you're referencing them in your patch. I haven't been keeping track of > > the latest status of all the audio patches, so I myself can't point to > > exactly what patches you depend on and whether those patches are ready > > to land. > > > > In any case, the contents of this patch seem OK assuming the dependent > > patches cause something that looks like the current (downstream) > > chromeos-5.15 tree. > > > > Reviewed-by: Douglas Anderson <dianders@chromium.org> > > To my best knowledge the dependencies of the audio mess are (roughly in > order): > > Add support for audio clock gating resets for SC7280 (v8) > https://patchwork.kernel.org/project/linux-arm-msm/list/?series=671887 > ready to land? (patch 2 has a minor comment about SoB tag) The comment has been addressed in v9: https://patchwork.kernel.org/project/linux-arm-msm/list/?series=673055 So it seems all the audio bits should be ready to land. Satya: please make sure to include change logs in all future patches to help reviewers understand what changed in each version. > Add DT support for audio clock gating resets for SC7280 (v4) > https://patchwork.kernel.org/project/linux-arm-msm/list/?series=666480 > ready to land after dependencies land > > Add soundcard support for sc7280 based platforms (v14) > https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657417 > ready to land after dependencies land > > Add dtsi for sc7280 herobrine boards that using rt5682 codec (v3) > https://patchwork.kernel.org/project/linux-arm-msm/list/?series=644812 > ready to land after dependencies land > > Add new board revision and LTE SKUs for sc7280-villager family (v8) > https://patchwork.kernel.org/project/linux-arm-msm/list/?series=663014 > ready to land after dependencies land > > arm64: dts: qcom: sc7280: Fix Dmic no sound on villager-r1 (v4) > https://patchwork.kernel.org/project/linux-arm-msm/patch/20220826065621.2255795-1-judyhsiao@chromium.org/ > ready to land after dependencies land > > So it looks like things are generally ready to land, unless [1] needs a > re-spin to fix the SoB tag. > > m. > > [1] https://patchwork.kernel.org/project/linux-arm-msm/patch/1661754153-14813-3-git-send-email-quic_c_skakit@quicinc.com/
Hi Matthias, On 9/7/2022 9:16 PM, Matthias Kaehlcke wrote: > >> Add support for audio clock gating resets for SC7280 (v8) >> https://patchwork.kernel.org/project/linux-arm-msm/list/?series=671887 >> ready to land? (patch 2 has a minor comment about SoB tag) > The comment has been addressed in v9: > > https://patchwork.kernel.org/project/linux-arm-msm/list/?series=673055 > > So it seems all the audio bits should be ready to land. > > Satya: please make sure to include change logs in all future patches to > help reviewers understand what changed in each version. I have added the change log in the cover letter, I'll add it to all the patches of series from next time. Thanks, Satya Priya
On Fri, Aug 26, 2022 at 06:56:21AM +0000, Judy Hsiao wrote: > Fix the DMIC no sound issue of villager-r1 by using "PP1800_L2C" as the > DMIC power source to match the hardware schematic. > > This patch: > 1. set vdd-micb-supply to PP1800_L2C as the MIC Bias voltage regulator. > 2. In audio-routing, set VA DMIC01~VA DMIC03 to use the vdd-micb-supply > setting. > > Co-developed-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> > --- > Changes since V3: > -- Update the commit message and fix extra blank line. > Changes since V2: > -- Update the commit message. > Changes since V1: > -- Update the commit message. > > This patch depends on: > arm64: dts: qcom: sc7280: Add herobrine-villager-r1. [1] > > [1] https://patchwork.kernel.org/patch/12929106 With [1] applied this patch applies cleanly, but it doesn't built. What am I missing? Regards, Bjorn > > .../dts/qcom/sc7280-herobrine-villager-r1.dts | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts > index c03b3ae4de50..fd202a8f6a33 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts > +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts > @@ -12,3 +12,30 @@ / { > model = "Google Villager (rev1+)"; > compatible = "google,villager", "qcom,sc7280"; > }; > + > +&lpass_va_macro { > + vdd-micb-supply = <&pp1800_l2c>; > +}; > + > +&sound { > + audio-routing = > + "IN1_HPHL", "HPHL_OUT", > + "IN2_HPHR", "HPHR_OUT", > + "AMIC1", "MIC BIAS1", > + "AMIC2", "MIC BIAS2", > + "VA DMIC0", "vdd-micb", > + "VA DMIC1", "vdd-micb", > + "VA DMIC2", "vdd-micb", > + "VA DMIC3", "vdd-micb", > + "TX SWR_ADC0", "ADC1_OUTPUT", > + "TX SWR_ADC1", "ADC2_OUTPUT", > + "TX SWR_ADC2", "ADC3_OUTPUT", > + "TX SWR_DMIC0", "DMIC1_OUTPUT", > + "TX SWR_DMIC1", "DMIC2_OUTPUT", > + "TX SWR_DMIC2", "DMIC3_OUTPUT", > + "TX SWR_DMIC3", "DMIC4_OUTPUT", > + "TX SWR_DMIC4", "DMIC5_OUTPUT", > + "TX SWR_DMIC5", "DMIC6_OUTPUT", > + "TX SWR_DMIC6", "DMIC7_OUTPUT", > + "TX SWR_DMIC7", "DMIC8_OUTPUT"; > +}; > -- > 2.37.2.672.g94769d06f0-goog >
On Fri, 26 Aug 2022 06:56:21 +0000, Judy Hsiao wrote: > Fix the DMIC no sound issue of villager-r1 by using "PP1800_L2C" as the > DMIC power source to match the hardware schematic. > > This patch: > 1. set vdd-micb-supply to PP1800_L2C as the MIC Bias voltage regulator. > 2. In audio-routing, set VA DMIC01~VA DMIC03 to use the vdd-micb-supply > setting. > > [...] Applied, thanks! [1/1] arm64: dts: qcom: sc7280: Fix Dmic no sound on villager-r1 commit: 61a301ca83736afeeeb307b931c59f107067da3c Best regards,
Please help to apply Add dtsi for sc7280 herobrine boards that using rt5682 codec (v4) https://patchwork.kernel.org/project/linux-arm-msm/list/?series=661760 It's dependencies are landed. Thanks & Regards On Tue, Sep 13, 2022 at 11:04 PM Bjorn Andersson <andersson@kernel.org> wrote: > > On Fri, 26 Aug 2022 06:56:21 +0000, Judy Hsiao wrote: > > Fix the DMIC no sound issue of villager-r1 by using "PP1800_L2C" as the > > DMIC power source to match the hardware schematic. > > > > This patch: > > 1. set vdd-micb-supply to PP1800_L2C as the MIC Bias voltage regulator. > > 2. In audio-routing, set VA DMIC01~VA DMIC03 to use the vdd-micb-supply > > setting. > > > > [...] > > Applied, thanks! > > [1/1] arm64: dts: qcom: sc7280: Fix Dmic no sound on villager-r1 > commit: 61a301ca83736afeeeb307b931c59f107067da3c > > Best regards, > -- > Bjorn Andersson <andersson@kernel.org>
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts index c03b3ae4de50..fd202a8f6a33 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts @@ -12,3 +12,30 @@ / { model = "Google Villager (rev1+)"; compatible = "google,villager", "qcom,sc7280"; }; + +&lpass_va_macro { + vdd-micb-supply = <&pp1800_l2c>; +}; + +&sound { + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb", + "VA DMIC2", "vdd-micb", + "VA DMIC3", "vdd-micb", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; +};
Fix the DMIC no sound issue of villager-r1 by using "PP1800_L2C" as the DMIC power source to match the hardware schematic. This patch: 1. set vdd-micb-supply to PP1800_L2C as the MIC Bias voltage regulator. 2. In audio-routing, set VA DMIC01~VA DMIC03 to use the vdd-micb-supply setting. Co-developed-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> --- Changes since V3: -- Update the commit message and fix extra blank line. Changes since V2: -- Update the commit message. Changes since V1: -- Update the commit message. This patch depends on: arm64: dts: qcom: sc7280: Add herobrine-villager-r1. [1] [1] https://patchwork.kernel.org/patch/12929106 .../dts/qcom/sc7280-herobrine-villager-r1.dts | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+)