| Message ID | 20220913025043.GH1728671@dragon (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [GIT,PULL] i.MX fixes for 6.0, 2nd round | expand |
On Tue, Sep 13, 2022 at 10:50:49AM +0800, Shawn Guo wrote: > The following changes since commit 8f143b9f3849828870bb2a7f28288095ad9a329d: > > arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity (2022-08-22 10:07:46 +0800) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-6.0-2 > > for you to fetch changes up to c1f84a75babecd9fa11f128f2da8991e2f8fb179: > > arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation (2022-09-13 10:23:48 +0800) > > ---------------------------------------------------------------- > i.MX fixes for 6.0, 2nd round: > > - A couple of TQMa8MPQL device tree fixes from Alexander Stein on button > GPIOs and PCF85063 RTC alarm pinctrl. > - Include phy-imx8-pcie.h header in tqma8mqml-mba8mx device tree to fix > build errors when this SoM dtsi is included on customer carrier boards. > - Remove GPU power domain reset from i.MX8MN device tree to fix > a sporadical hang seen with GPUMIX powering up. > - Correct CPLD_Dn GPIO label mapping for Toradex Verdin based Menlo > board. > - Add ARCH_NXP back to defconfig, which was dropped accidentally by > commit 566e373fe047 ("arm64: Kconfig.platforms: Group NXP platforms > together"). > - Add missing #reset-cells for i.MX8ULP PCC clock controllers. > - Update PMIC voltages for imx8mm-verdin board to fix an issue with one > Toradex SKU that uses a consumer-grade chip that is capable of going up > to 1.8GHz at 1.00V. > - A series of imx8mp-venice-gw74xx device tree changes from Tim Harvey > to fix things on CAN STBY polarity, KSZ9477 CPU uplink port and > phy-mode. > > ---------------------------------------------------------------- > Alexander Stein (2): > arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs > arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm > > Fabio Estevam (1): > arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header > > Marco Felsch (1): > arm64: dts: imx8mn: remove GPU power domain reset > > Marek Vasut (1): > arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo > > Michael Walle (1): > arm64: defconfig: enable ARCH_NXP > > Peng Fan (1): > arm64: dts: imx8ulp: add #reset-cells for pcc > > Philippe Schenker (1): > arm64: dts: imx8mm-verdin: extend pmic voltages > > Tim Harvey (3): > arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity > arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port > arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation The Fixes tag in this commit had a minor format issue. I fixed it up and thus updated the PR as blow. Shawn The following changes since commit 8f143b9f3849828870bb2a7f28288095ad9a329d: arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity (2022-08-22 10:07:46 +0800) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-6.0-2 for you to fetch changes up to f7fc391a5e28216150ab5390df35032309ead7e5: arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation (2022-09-14 11:45:09 +0800) ---------------------------------------------------------------- i.MX fixes for 6.0, 2nd round: - A couple of TQMa8MPQL device tree fixes from Alexander Stein on button GPIOs and PCF85063 RTC alarm pinctrl. - Include phy-imx8-pcie.h header in tqma8mqml-mba8mx device tree to fix build errors when this SoM dtsi is included on customer carrier boards. - Remove GPU power domain reset from i.MX8MN device tree to fix a sporadical hang seen with GPUMIX powering up. - Correct CPLD_Dn GPIO label mapping for Toradex Verdin based Menlo board. - Add ARCH_NXP back to defconfig, which was dropped accidentally by commit 566e373fe047 ("arm64: Kconfig.platforms: Group NXP platforms together"). - Add missing #reset-cells for i.MX8ULP PCC clock controllers. - Update PMIC voltages for imx8mm-verdin board to fix an issue with one Toradex SKU that uses a consumer-grade chip that is capable of going up to 1.8GHz at 1.00V. - A series of imx8mp-venice-gw74xx device tree changes from Tim Harvey to fix things on CAN STBY polarity, KSZ9477 CPU uplink port and phy-mode. ---------------------------------------------------------------- Alexander Stein (2): arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm Fabio Estevam (1): arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header Marco Felsch (1): arm64: dts: imx8mn: remove GPU power domain reset Marek Vasut (1): arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo Michael Walle (1): arm64: defconfig: enable ARCH_NXP Peng Fan (1): arm64: dts: imx8ulp: add #reset-cells for pcc Philippe Schenker (1): arm64: dts: imx8mm-verdin: extend pmic voltages Tim Harvey (3): arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts | 10 +++++----- arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts | 1 - arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi | 1 + arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 10 +++++----- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 1 - arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 10 ++++++++-- arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts | 12 ++++++++---- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 3 +++ arch/arm64/configs/defconfig | 1 + 9 files changed, 31 insertions(+), 18 deletions(-)
The following changes since commit 8f143b9f3849828870bb2a7f28288095ad9a329d: arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity (2022-08-22 10:07:46 +0800) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-6.0-2 for you to fetch changes up to c1f84a75babecd9fa11f128f2da8991e2f8fb179: arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation (2022-09-13 10:23:48 +0800) ---------------------------------------------------------------- i.MX fixes for 6.0, 2nd round: - A couple of TQMa8MPQL device tree fixes from Alexander Stein on button GPIOs and PCF85063 RTC alarm pinctrl. - Include phy-imx8-pcie.h header in tqma8mqml-mba8mx device tree to fix build errors when this SoM dtsi is included on customer carrier boards. - Remove GPU power domain reset from i.MX8MN device tree to fix a sporadical hang seen with GPUMIX powering up. - Correct CPLD_Dn GPIO label mapping for Toradex Verdin based Menlo board. - Add ARCH_NXP back to defconfig, which was dropped accidentally by commit 566e373fe047 ("arm64: Kconfig.platforms: Group NXP platforms together"). - Add missing #reset-cells for i.MX8ULP PCC clock controllers. - Update PMIC voltages for imx8mm-verdin board to fix an issue with one Toradex SKU that uses a consumer-grade chip that is capable of going up to 1.8GHz at 1.00V. - A series of imx8mp-venice-gw74xx device tree changes from Tim Harvey to fix things on CAN STBY polarity, KSZ9477 CPU uplink port and phy-mode. ---------------------------------------------------------------- Alexander Stein (2): arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm Fabio Estevam (1): arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header Marco Felsch (1): arm64: dts: imx8mn: remove GPU power domain reset Marek Vasut (1): arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo Michael Walle (1): arm64: defconfig: enable ARCH_NXP Peng Fan (1): arm64: dts: imx8ulp: add #reset-cells for pcc Philippe Schenker (1): arm64: dts: imx8mm-verdin: extend pmic voltages Tim Harvey (3): arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts | 10 +++++----- arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts | 1 - arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi | 1 + arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 10 +++++----- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 1 - arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 10 ++++++++-- arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts | 12 ++++++++---- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 3 +++ arch/arm64/configs/defconfig | 1 + 9 files changed, 31 insertions(+), 18 deletions(-)