diff mbox series

[v9,6/7] arm64: dts: mt8195: Add thermal zones and thermal nodes

Message ID 20220817080757.352021-7-bchihi@baylibre.com (mailing list archive)
State New, archived
Headers show
Series Add LVTS thermal architecture | expand

Commit Message

Balsam CHIHI Aug. 17, 2022, 8:07 a.m. UTC 
From: Tinghan Shen <tinghan.shen@mediatek.com>

Add thermal zones and thermal nodes for the mt8195.

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Co-developed-by: Ben Tseng <ben.tseng@mediatek.com>
Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
Co-developed-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Co-developed-by: Balsam CHIHI <bchihi@baylibre.com>
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 111 +++++++++++++++++++++++
 1 file changed, 111 insertions(+)

Comments

AngeloGioacchino Del Regno Sept. 14, 2022, 12:25 p.m. UTC | #1 
Il 17/08/22 10:07, bchihi@baylibre.com ha scritto:
> From: Tinghan Shen <tinghan.shen@mediatek.com>
> 
> Add thermal zones and thermal nodes for the mt8195.
> 
> Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
> Co-developed-by: Ben Tseng <ben.tseng@mediatek.com>
> Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
> Co-developed-by: Alexandre Bailon <abailon@baylibre.com>
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> Co-developed-by: Balsam CHIHI <bchihi@baylibre.com>
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8195.dtsi | 111 +++++++++++++++++++++++
>   1 file changed, 111 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index 95967a0196d8..aafbbe83e6ba 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -10,6 +10,7 @@
>   #include <dt-bindings/interrupt-controller/irq.h>
>   #include <dt-bindings/phy/phy.h>
>   #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
> +#include <dt-bindings/reset/mt8195-resets.h>
>   
>   / {
>   	compatible = "mediatek,mt8195";
> @@ -452,6 +453,28 @@ spi0: spi@1100a000 {
>   			status = "disabled";
>   		};
>   
> +		lvts_ap: thermal-sensor@1100b000 {
> +			compatible = "mediatek,mt8195-lvts-ap";
> +			#thermal-sensor-cells = <1>;
> +			reg = <0 0x1100b000 0 0x1000>;
> +			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
> +			resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
> +			nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
> +			nvmem-cell-names = "lvts_calib_data1", "lvts_calib_data2";
> +		};
> +
> +		lvts_mcu: thermal-sensor@11278000 {

Please keep the devicetree nodes ordered by address.
This one must be moved between mmc@1125000 and usb@11290000.

Regards,
Angelo

> +			compatible = "mediatek,mt8195-lvts-mcu";
> +			#thermal-sensor-cells = <1>;
> +			reg = <0 0x11278000 0 0x1000>;
> +			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
> +			resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
> +			nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
> +			nvmem-cell-names = "lvts_calib_data1", "lvts_calib_data2";
> +		};
> +
>   		spi1: spi@11010000 {
>   			compatible = "mediatek,mt8195-spi",
>   				     "mediatek,mt6765-spi";
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 95967a0196d8..aafbbe83e6ba 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -10,6 +10,7 @@ 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/reset/mt8195-resets.h>
 
 / {
 	compatible = "mediatek,mt8195";
@@ -452,6 +453,28 @@  spi0: spi@1100a000 {
 			status = "disabled";
 		};
 
+		lvts_ap: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8195-lvts-ap";
+			#thermal-sensor-cells = <1>;
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+			nvmem-cell-names = "lvts_calib_data1", "lvts_calib_data2";
+		};
+
+		lvts_mcu: thermal-sensor@11278000 {
+			compatible = "mediatek,mt8195-lvts-mcu";
+			#thermal-sensor-cells = <1>;
+			reg = <0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+			nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+			nvmem-cell-names = "lvts_calib_data1", "lvts_calib_data2";
+		};
+
 		spi1: spi@11010000 {
 			compatible = "mediatek,mt8195-spi",
 				     "mediatek,mt6765-spi";
@@ -1106,4 +1129,92 @@  vencsys_core1: clock-controller@1b000000 {
 			#clock-cells = <1>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_mcu 0>;
+		};
+		cpu1-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_mcu 1>;
+		};
+		cpu2-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_mcu 2>;
+		};
+		cpu3-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_mcu 3>;
+		};
+		cpu4-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_mcu 4>;
+		};
+		cpu5-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_mcu 5>;
+		};
+		cpu6-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_mcu 6>;
+		};
+		cpu7-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_mcu 7>;
+		};
+		vpu1-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_ap 0>;
+		};
+		vpu2-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_ap 1>;
+		};
+		gpu1-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_ap 2>;
+		};
+		gpu2-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_ap 3>;
+		};
+		vdec-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_ap 4>;
+		};
+		img-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_ap 5>;
+		};
+		infra-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_ap 6>;
+		};
+		cam1-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_ap 7>;
+		};
+		cam2-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&lvts_ap 8>;
+		};
+	};
 };