| Message ID | 20220907205753.1577434-1-saproj@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mmc: moxart: fix 4-bit bus width, remove 8-bit bus width | expand |
On Wed, 7 Sept 2022 at 22:58, Sergei Antonov <saproj@gmail.com> wrote: > > According to the datasheet: > https://bitbucket.org/Kasreyn/mkrom-uc7112lx/src/master/documents/FIC8120_DS_v1.2.pdf > , page 377 > 4-bit bus width is turned on by bit 2 of the Bus Width Register, so > the current bitmask is wrong: > define BUS_WIDTH_4 BIT(1) > BIT(1) does not work and BIT(2) works. It was verified on real MOXA > hardware with FTSDC010 controller revision 1_6_0. > > The corrected value of BUS_WIDTH_4 mask collides with: > define BUS_WIDTH_8 BIT(2) > No evidence of 8-bit bus width mode is found in the datasheet. Remove > code dealing with 8-bit bus width. > > Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver") > Signed-off-by: Sergei Antonov <saproj@gmail.com> > Cc: Jonas Jensen <jonas.jensen@gmail.com> Applied for fixes and by adding a stable tag, thanks! Kind regards Uffe > --- > drivers/mmc/host/moxart-mmc.c | 17 +++-------------- > 1 file changed, 3 insertions(+), 14 deletions(-) > > diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c > index b6eb75f4bbfc..dfc3ffd5b1f8 100644 > --- a/drivers/mmc/host/moxart-mmc.c > +++ b/drivers/mmc/host/moxart-mmc.c > @@ -111,8 +111,8 @@ > #define CLK_DIV_MASK 0x7f > > /* REG_BUS_WIDTH */ > -#define BUS_WIDTH_8 BIT(2) > -#define BUS_WIDTH_4 BIT(1) > +#define BUS_WIDTH_4_SUPPORT BIT(3) > +#define BUS_WIDTH_4 BIT(2) > #define BUS_WIDTH_1 BIT(0) > > #define MMC_VDD_360 23 > @@ -524,9 +524,6 @@ static void moxart_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > case MMC_BUS_WIDTH_4: > writel(BUS_WIDTH_4, host->base + REG_BUS_WIDTH); > break; > - case MMC_BUS_WIDTH_8: > - writel(BUS_WIDTH_8, host->base + REG_BUS_WIDTH); > - break; > default: > writel(BUS_WIDTH_1, host->base + REG_BUS_WIDTH); > break; > @@ -651,16 +648,8 @@ static int moxart_probe(struct platform_device *pdev) > dmaengine_slave_config(host->dma_chan_rx, &cfg); > } > > - switch ((readl(host->base + REG_BUS_WIDTH) >> 3) & 3) { > - case 1: > + if (readl(host->base + REG_BUS_WIDTH) & BUS_WIDTH_4_SUPPORT) > mmc->caps |= MMC_CAP_4_BIT_DATA; > - break; > - case 2: > - mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; > - break; > - default: > - break; > - } > > writel(0, host->base + REG_INTERRUPT_MASK); > > -- > 2.34.1 >
diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c index b6eb75f4bbfc..dfc3ffd5b1f8 100644 --- a/drivers/mmc/host/moxart-mmc.c +++ b/drivers/mmc/host/moxart-mmc.c @@ -111,8 +111,8 @@ #define CLK_DIV_MASK 0x7f /* REG_BUS_WIDTH */ -#define BUS_WIDTH_8 BIT(2) -#define BUS_WIDTH_4 BIT(1) +#define BUS_WIDTH_4_SUPPORT BIT(3) +#define BUS_WIDTH_4 BIT(2) #define BUS_WIDTH_1 BIT(0) #define MMC_VDD_360 23 @@ -524,9 +524,6 @@ static void moxart_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_BUS_WIDTH_4: writel(BUS_WIDTH_4, host->base + REG_BUS_WIDTH); break; - case MMC_BUS_WIDTH_8: - writel(BUS_WIDTH_8, host->base + REG_BUS_WIDTH); - break; default: writel(BUS_WIDTH_1, host->base + REG_BUS_WIDTH); break; @@ -651,16 +648,8 @@ static int moxart_probe(struct platform_device *pdev) dmaengine_slave_config(host->dma_chan_rx, &cfg); } - switch ((readl(host->base + REG_BUS_WIDTH) >> 3) & 3) { - case 1: + if (readl(host->base + REG_BUS_WIDTH) & BUS_WIDTH_4_SUPPORT) mmc->caps |= MMC_CAP_4_BIT_DATA; - break; - case 2: - mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; - break; - default: - break; - } writel(0, host->base + REG_INTERRUPT_MASK);
According to the datasheet: https://bitbucket.org/Kasreyn/mkrom-uc7112lx/src/master/documents/FIC8120_DS_v1.2.pdf , page 377 4-bit bus width is turned on by bit 2 of the Bus Width Register, so the current bitmask is wrong: define BUS_WIDTH_4 BIT(1) BIT(1) does not work and BIT(2) works. It was verified on real MOXA hardware with FTSDC010 controller revision 1_6_0. The corrected value of BUS_WIDTH_4 mask collides with: define BUS_WIDTH_8 BIT(2) No evidence of 8-bit bus width mode is found in the datasheet. Remove code dealing with 8-bit bus width. Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver") Signed-off-by: Sergei Antonov <saproj@gmail.com> Cc: Jonas Jensen <jonas.jensen@gmail.com> --- drivers/mmc/host/moxart-mmc.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-)