| Message ID | 20220915064337.2686-1-irui.wang@mediatek.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Enable jpeg enc & dec multi-hardwares for MT8195 | expand |
Il 15/09/22 08:43, Irui Wang ha scritto: > From: kyrie wu <kyrie.wu@mediatek.com> > > This series adds support for multi hardwares jpeg enc & dec, > by first adding use of_platform_populate to manage each hardware > information:interrupt, clock, register bases and power. > Secondly add jpeg enc & dec work queue to deal with the encoding > or decoding requests of multi-hardwares at the same time. > Lastly, add output picture reorder function interface to > eliminate the out of order images. > > This series has been tested with MT8195 Gstreamer. > Encoding and decoding worked for this chip. > Hello Irui, I may have lost some piece of conversation on v13, but as far as I can see, both series, jpeg ENC+DEC were picked by Hans [1]. If you have further improvements to that, you should make new commits and not a new version for the series. Please look at Hans' media tree at [1]. Regards, Angelo [1]: https://git.linuxtv.org/hverkuil/media_tree.git/log/?h=for-v6.1n
Hi Irui, On 9/15/22 08:21, kyrie.wu wrote: > On Thu, 2022-09-15 at 14:43 +0800, Irui Wang wrote: >> From: kyrie wu <kyrie.wu@mediatek.com> >> >> This series adds support for multi hardwares jpeg enc & dec, >> by first adding use of_platform_populate to manage each hardware >> information:interrupt, clock, register bases and power. >> Secondly add jpeg enc & dec work queue to deal with the encoding >> or decoding requests of multi-hardwares at the same time. >> Lastly, add output picture reorder function interface to >> eliminate the out of order images. >> >> This series has been tested with MT8195 Gstreamer. >> Encoding and decoding worked for this chip. > > Hi Hans, > > I'm terrible sorry for that I didn't notice you picked all > patches series includes jpeg enc + dec. > Please overlook the V14 and I will send a new series to fix > kernel-doc warns. No, I didn't pick it up. The branch Angelo pointed to is just the branch I used to compile test your series, I haven't posted a PR for it. Next week I'll try again with v14 to check if it passes all my compile tests, and if OK, then I'll post a PR. Patches are picked up if I post a PR and they are marked as 'Under Review' in patchwork. When Mauro merges them in our tree, then the state goes to 'Accepted'. Regards, Hans > > Thanks. > > Regards, > Kyrie. >> >> Patches 1 Adds jpeg encoder dt-bindings for mt8195 >> >> Patches 2 jpeg encoder builds two module for using Multi-HW, >> export some functions to make them visible by other modules. >> >> Patches 3 use devm_of_platform_populate to manage multi-hardware. >> >> Patch 4 add jpeg encoding timeout function to judge hardware timeout. >> >> Patch 5 add encoding work queue to deal with multi-hardware encoding >> at the same time. >> >> Patch 6 add output picture reorder function to order images. >> >> Patch 7 add stop cmd function to deal with EOS operation. >> >> Patch 8 Adds jpeg decoder dt-bindings for mt8195 >> >> Patches 9 jpeg decoder builds three module for using Multi-HW, >> export some functions to make them visible by other modules. >> >> Patch 10 use of_platform_populate to manage multi-hardware. >> >> Patch 11 add jpeg decoding timeout function to judge hardware >> timeout. >> >> Patch 12 add decoding work queue to deal with multi-hardware decoding >> at the same time. >> >> Patch 13 add output picture reorder function to order images. >> >> Patch 14 refactor jpegdec func interface for HW working. >> >> Patch 15 add stop cmd function to deal with EOS operation. >> >> --- >> This series patches dependent on: >> media_stage tree: >> [1] >> > https://git.linuxtv.org/media_stage.git/commit/?id=b3627647f9ea7473d10fb08a95fd7c4133a17ca4 >> >> patch1 new jpegdec dt-bindings included files >> [2] MM IOMMU binding: >> > https://patchwork.kernel.org/project/linux-mediatek/patch/20220217113453.13658-2-yong.wu@mediatek.com/ >> >> [3] MT8195 power domain: >> > https://patchwork.kernel.org/project/linux-mediatek/list/?series=580579 >> >> Changes compared with v13: >> - some modifications for patch v13's review comments. >> - fix kernel robot check errors. >> - fix kernel-doc check warns. >> - fix sparse check warns. >> - combine jpeg encoder series with decoder series into >> one single series. >> >> Changes compared with v12: >> - some modifications for patch v12's review comments. >> >> Changes compared with v11: >> - some modifications for patch v11's review comments. >> - fix yaml file check errors. >> >> Changes compared with v10: >> - some modifications for patch v10's review comments. >> - fix Gstreamer test errors. >> >> Changes compared with v9: >> - some modifications for patch v9's review comments. >> >> Changes compared with v8: >> - some modifications for patch v8's review comments. >> - add stop cmd function. >> >> Changes compared with v7: >> - some modifications for patch v6's review comments. >> >> Changes compared with v6: >> - new yaml file for mt8195 jpeg encoder. >> - some modifications for patch v5's review comments. >> >> Changes compared with v5: >> - use of_platform_populate to replace component framework to >> manage multi-hardware in patch 2. >> >> Changes compared with v4: >> - No change compaered with v4 >> >> Changes compared with v3: >> - Structure patches for consistency, non-backward >> compatible and do not break any existing functionality >> >> Changes compared with v2: >> - Split the last two patches into several patches >> to enhance readability >> - Correct some syntax errors >> - Explain why the component framework is used >> >> Changes compared with v1: >> - Add jpeg encoder dt-bindings for MT8195 >> - Use component framework to manage jpegenc HW >> - Add jpegenc output pic reorder function interface >> >> kyrie wu (15): >> dt-bindings: mediatek: Add mediatek, mt8195-jpgenc compatible >> mtk-jpegenc: export jpeg encoder functions >> mtk-jpegenc: support jpegenc multi-hardware >> mtk-jpegenc: add jpegenc timeout func interface >> mtk-jpegenc: add jpeg encode worker interface >> mtk-jpegenc: add output pic reorder interface >> mtk-jpegenc: add stop cmd interface for jpgenc >> dt-bindings: mediatek: Add mediatek,mt8195-jpgdec compatible >> media: mtk-jpegdec: export jpeg decoder functions >> media: mtk-jpegdec: support jpegdec multi-hardware >> media: mtk-jpegdec: add jpegdec timeout func interface >> media: mtk-jpegdec: add jpeg decode worker interface >> media: mtk-jpegdec: add output pic reorder interface >> media: mtk-jpegdec: refactor jpegdec func interface >> mtk-jpegdec: add stop cmd interface for jpgdec >> >> .../media/mediatek,mt8195-jpegdec.yaml | 169 ++++++ >> .../media/mediatek,mt8195-jpegenc.yaml | 147 ++++++ >> drivers/media/platform/mediatek/jpeg/Makefile | 14 +- >> .../platform/mediatek/jpeg/mtk_jpeg_core.c | 490 >> ++++++++++++++++-- >> .../platform/mediatek/jpeg/mtk_jpeg_core.h | 169 +++++- >> .../platform/mediatek/jpeg/mtk_jpeg_dec_hw.c | 315 ++++++++++- >> .../platform/mediatek/jpeg/mtk_jpeg_dec_hw.h | 6 +- >> .../platform/mediatek/jpeg/mtk_jpeg_dec_reg.h | 1 + >> .../platform/mediatek/jpeg/mtk_jpeg_enc_hw.c | 255 +++++++++ >> 9 files changed, 1483 insertions(+), 83 deletions(-) >> create mode 100644 >> Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml >> create mode 100644 >> Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml >> >
Il 15/09/22 09:41, Hans Verkuil ha scritto: > Hi Irui, > > On 9/15/22 08:21, kyrie.wu wrote: >> On Thu, 2022-09-15 at 14:43 +0800, Irui Wang wrote: >>> From: kyrie wu <kyrie.wu@mediatek.com> >>> >>> This series adds support for multi hardwares jpeg enc & dec, >>> by first adding use of_platform_populate to manage each hardware >>> information:interrupt, clock, register bases and power. >>> Secondly add jpeg enc & dec work queue to deal with the encoding >>> or decoding requests of multi-hardwares at the same time. >>> Lastly, add output picture reorder function interface to >>> eliminate the out of order images. >>> >>> This series has been tested with MT8195 Gstreamer. >>> Encoding and decoding worked for this chip. >> >> Hi Hans, >> >> I'm terrible sorry for that I didn't notice you picked all >> patches series includes jpeg enc + dec. >> Please overlook the V14 and I will send a new series to fix >> kernel-doc warns. > > No, I didn't pick it up. The branch Angelo pointed to is just the branch I used to > compile test your series, I haven't posted a PR for it. > > Next week I'll try again with v14 to check if it passes all my compile tests, and > if OK, then I'll post a PR. > > Patches are picked up if I post a PR and they are marked as 'Under Review' in > patchwork. When Mauro merges them in our tree, then the state goes to 'Accepted'. > Sorry for the confusion. Regards, Angelo > Regards, > > Hans > >> >> Thanks. >> >> Regards, >> Kyrie. >>> >>> Patches 1 Adds jpeg encoder dt-bindings for mt8195 >>> >>> Patches 2 jpeg encoder builds two module for using Multi-HW, >>> export some functions to make them visible by other modules. >>> >>> Patches 3 use devm_of_platform_populate to manage multi-hardware. >>> >>> Patch 4 add jpeg encoding timeout function to judge hardware timeout. >>> >>> Patch 5 add encoding work queue to deal with multi-hardware encoding >>> at the same time. >>> >>> Patch 6 add output picture reorder function to order images. >>> >>> Patch 7 add stop cmd function to deal with EOS operation. >>> >>> Patch 8 Adds jpeg decoder dt-bindings for mt8195 >>> >>> Patches 9 jpeg decoder builds three module for using Multi-HW, >>> export some functions to make them visible by other modules. >>> >>> Patch 10 use of_platform_populate to manage multi-hardware. >>> >>> Patch 11 add jpeg decoding timeout function to judge hardware >>> timeout. >>> >>> Patch 12 add decoding work queue to deal with multi-hardware decoding >>> at the same time. >>> >>> Patch 13 add output picture reorder function to order images. >>> >>> Patch 14 refactor jpegdec func interface for HW working. >>> >>> Patch 15 add stop cmd function to deal with EOS operation. >>> >>> --- >>> This series patches dependent on: >>> media_stage tree: >>> [1] >>> >> https://git.linuxtv.org/media_stage.git/commit/?id=b3627647f9ea7473d10fb08a95fd7c4133a17ca4 >>> >>> patch1 new jpegdec dt-bindings included files >>> [2] MM IOMMU binding: >>> >> https://patchwork.kernel.org/project/linux-mediatek/patch/20220217113453.13658-2-yong.wu@mediatek.com/ >>> >>> [3] MT8195 power domain: >>> >> https://patchwork.kernel.org/project/linux-mediatek/list/?series=580579 >>> >>> Changes compared with v13: >>> - some modifications for patch v13's review comments. >>> - fix kernel robot check errors. >>> - fix kernel-doc check warns. >>> - fix sparse check warns. >>> - combine jpeg encoder series with decoder series into >>> one single series. >>> >>> Changes compared with v12: >>> - some modifications for patch v12's review comments. >>> >>> Changes compared with v11: >>> - some modifications for patch v11's review comments. >>> - fix yaml file check errors. >>> >>> Changes compared with v10: >>> - some modifications for patch v10's review comments. >>> - fix Gstreamer test errors. >>> >>> Changes compared with v9: >>> - some modifications for patch v9's review comments. >>> >>> Changes compared with v8: >>> - some modifications for patch v8's review comments. >>> - add stop cmd function. >>> >>> Changes compared with v7: >>> - some modifications for patch v6's review comments. >>> >>> Changes compared with v6: >>> - new yaml file for mt8195 jpeg encoder. >>> - some modifications for patch v5's review comments. >>> >>> Changes compared with v5: >>> - use of_platform_populate to replace component framework to >>> manage multi-hardware in patch 2. >>> >>> Changes compared with v4: >>> - No change compaered with v4 >>> >>> Changes compared with v3: >>> - Structure patches for consistency, non-backward >>> compatible and do not break any existing functionality >>> >>> Changes compared with v2: >>> - Split the last two patches into several patches >>> to enhance readability >>> - Correct some syntax errors >>> - Explain why the component framework is used >>> >>> Changes compared with v1: >>> - Add jpeg encoder dt-bindings for MT8195 >>> - Use component framework to manage jpegenc HW >>> - Add jpegenc output pic reorder function interface >>> >>> kyrie wu (15): >>> dt-bindings: mediatek: Add mediatek, mt8195-jpgenc compatible >>> mtk-jpegenc: export jpeg encoder functions >>> mtk-jpegenc: support jpegenc multi-hardware >>> mtk-jpegenc: add jpegenc timeout func interface >>> mtk-jpegenc: add jpeg encode worker interface >>> mtk-jpegenc: add output pic reorder interface >>> mtk-jpegenc: add stop cmd interface for jpgenc >>> dt-bindings: mediatek: Add mediatek,mt8195-jpgdec compatible >>> media: mtk-jpegdec: export jpeg decoder functions >>> media: mtk-jpegdec: support jpegdec multi-hardware >>> media: mtk-jpegdec: add jpegdec timeout func interface >>> media: mtk-jpegdec: add jpeg decode worker interface >>> media: mtk-jpegdec: add output pic reorder interface >>> media: mtk-jpegdec: refactor jpegdec func interface >>> mtk-jpegdec: add stop cmd interface for jpgdec >>> >>> .../media/mediatek,mt8195-jpegdec.yaml | 169 ++++++ >>> .../media/mediatek,mt8195-jpegenc.yaml | 147 ++++++ >>> drivers/media/platform/mediatek/jpeg/Makefile | 14 +- >>> .../platform/mediatek/jpeg/mtk_jpeg_core.c | 490 >>> ++++++++++++++++-- >>> .../platform/mediatek/jpeg/mtk_jpeg_core.h | 169 +++++- >>> .../platform/mediatek/jpeg/mtk_jpeg_dec_hw.c | 315 ++++++++++- >>> .../platform/mediatek/jpeg/mtk_jpeg_dec_hw.h | 6 +- >>> .../platform/mediatek/jpeg/mtk_jpeg_dec_reg.h | 1 + >>> .../platform/mediatek/jpeg/mtk_jpeg_enc_hw.c | 255 +++++++++ >>> 9 files changed, 1483 insertions(+), 83 deletions(-) >>> create mode 100644 >>> Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml >>> create mode 100644 >>> Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml >>> >>
Hi Irui, Something went wrong here: patches 10-15 never made it to the mailinglist. Can you repost? Hans On 15/09/2022 08:43, Irui Wang wrote: > From: kyrie wu <kyrie.wu@mediatek.com> > > This series adds support for multi hardwares jpeg enc & dec, > by first adding use of_platform_populate to manage each hardware > information:interrupt, clock, register bases and power. > Secondly add jpeg enc & dec work queue to deal with the encoding > or decoding requests of multi-hardwares at the same time. > Lastly, add output picture reorder function interface to > eliminate the out of order images. > > This series has been tested with MT8195 Gstreamer. > Encoding and decoding worked for this chip. > > Patches 1 Adds jpeg encoder dt-bindings for mt8195 > > Patches 2 jpeg encoder builds two module for using Multi-HW, > export some functions to make them visible by other modules. > > Patches 3 use devm_of_platform_populate to manage multi-hardware. > > Patch 4 add jpeg encoding timeout function to judge hardware timeout. > > Patch 5 add encoding work queue to deal with multi-hardware encoding > at the same time. > > Patch 6 add output picture reorder function to order images. > > Patch 7 add stop cmd function to deal with EOS operation. > > Patch 8 Adds jpeg decoder dt-bindings for mt8195 > > Patches 9 jpeg decoder builds three module for using Multi-HW, > export some functions to make them visible by other modules. > > Patch 10 use of_platform_populate to manage multi-hardware. > > Patch 11 add jpeg decoding timeout function to judge hardware timeout. > > Patch 12 add decoding work queue to deal with multi-hardware decoding > at the same time. > > Patch 13 add output picture reorder function to order images. > > Patch 14 refactor jpegdec func interface for HW working. > > Patch 15 add stop cmd function to deal with EOS operation. > > --- > This series patches dependent on: > media_stage tree: > [1] > https://git.linuxtv.org/media_stage.git/commit/?id=b3627647f9ea7473d10fb08a95fd7c4133a17ca4 > > patch1 new jpegdec dt-bindings included files > [2] MM IOMMU binding: > https://patchwork.kernel.org/project/linux-mediatek/patch/20220217113453.13658-2-yong.wu@mediatek.com/ > > [3] MT8195 power domain: > https://patchwork.kernel.org/project/linux-mediatek/list/?series=580579 > > Changes compared with v13: > - some modifications for patch v13's review comments. > - fix kernel robot check errors. > - fix kernel-doc check warns. > - fix sparse check warns. > - combine jpeg encoder series with decoder series into > one single series. > > Changes compared with v12: > - some modifications for patch v12's review comments. > > Changes compared with v11: > - some modifications for patch v11's review comments. > - fix yaml file check errors. > > Changes compared with v10: > - some modifications for patch v10's review comments. > - fix Gstreamer test errors. > > Changes compared with v9: > - some modifications for patch v9's review comments. > > Changes compared with v8: > - some modifications for patch v8's review comments. > - add stop cmd function. > > Changes compared with v7: > - some modifications for patch v6's review comments. > > Changes compared with v6: > - new yaml file for mt8195 jpeg encoder. > - some modifications for patch v5's review comments. > > Changes compared with v5: > - use of_platform_populate to replace component framework to > manage multi-hardware in patch 2. > > Changes compared with v4: > - No change compaered with v4 > > Changes compared with v3: > - Structure patches for consistency, non-backward > compatible and do not break any existing functionality > > Changes compared with v2: > - Split the last two patches into several patches > to enhance readability > - Correct some syntax errors > - Explain why the component framework is used > > Changes compared with v1: > - Add jpeg encoder dt-bindings for MT8195 > - Use component framework to manage jpegenc HW > - Add jpegenc output pic reorder function interface > > kyrie wu (15): > dt-bindings: mediatek: Add mediatek, mt8195-jpgenc compatible > mtk-jpegenc: export jpeg encoder functions > mtk-jpegenc: support jpegenc multi-hardware > mtk-jpegenc: add jpegenc timeout func interface > mtk-jpegenc: add jpeg encode worker interface > mtk-jpegenc: add output pic reorder interface > mtk-jpegenc: add stop cmd interface for jpgenc > dt-bindings: mediatek: Add mediatek,mt8195-jpgdec compatible > media: mtk-jpegdec: export jpeg decoder functions > media: mtk-jpegdec: support jpegdec multi-hardware > media: mtk-jpegdec: add jpegdec timeout func interface > media: mtk-jpegdec: add jpeg decode worker interface > media: mtk-jpegdec: add output pic reorder interface > media: mtk-jpegdec: refactor jpegdec func interface > mtk-jpegdec: add stop cmd interface for jpgdec > > .../media/mediatek,mt8195-jpegdec.yaml | 169 ++++++ > .../media/mediatek,mt8195-jpegenc.yaml | 147 ++++++ > drivers/media/platform/mediatek/jpeg/Makefile | 14 +- > .../platform/mediatek/jpeg/mtk_jpeg_core.c | 490 ++++++++++++++++-- > .../platform/mediatek/jpeg/mtk_jpeg_core.h | 169 +++++- > .../platform/mediatek/jpeg/mtk_jpeg_dec_hw.c | 315 ++++++++++- > .../platform/mediatek/jpeg/mtk_jpeg_dec_hw.h | 6 +- > .../platform/mediatek/jpeg/mtk_jpeg_dec_reg.h | 1 + > .../platform/mediatek/jpeg/mtk_jpeg_enc_hw.c | 255 +++++++++ > 9 files changed, 1483 insertions(+), 83 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml > create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml >
From: kyrie wu <kyrie.wu@mediatek.com> This series adds support for multi hardwares jpeg enc & dec, by first adding use of_platform_populate to manage each hardware information:interrupt, clock, register bases and power. Secondly add jpeg enc & dec work queue to deal with the encoding or decoding requests of multi-hardwares at the same time. Lastly, add output picture reorder function interface to eliminate the out of order images. This series has been tested with MT8195 Gstreamer. Encoding and decoding worked for this chip. Patches 1 Adds jpeg encoder dt-bindings for mt8195 Patches 2 jpeg encoder builds two module for using Multi-HW, export some functions to make them visible by other modules. Patches 3 use devm_of_platform_populate to manage multi-hardware. Patch 4 add jpeg encoding timeout function to judge hardware timeout. Patch 5 add encoding work queue to deal with multi-hardware encoding at the same time. Patch 6 add output picture reorder function to order images. Patch 7 add stop cmd function to deal with EOS operation. Patch 8 Adds jpeg decoder dt-bindings for mt8195 Patches 9 jpeg decoder builds three module for using Multi-HW, export some functions to make them visible by other modules. Patch 10 use of_platform_populate to manage multi-hardware. Patch 11 add jpeg decoding timeout function to judge hardware timeout. Patch 12 add decoding work queue to deal with multi-hardware decoding at the same time. Patch 13 add output picture reorder function to order images. Patch 14 refactor jpegdec func interface for HW working. Patch 15 add stop cmd function to deal with EOS operation. --- This series patches dependent on: media_stage tree: [1] https://git.linuxtv.org/media_stage.git/commit/?id=b3627647f9ea7473d10fb08a95fd7c4133a17ca4 patch1 new jpegdec dt-bindings included files [2] MM IOMMU binding: https://patchwork.kernel.org/project/linux-mediatek/patch/20220217113453.13658-2-yong.wu@mediatek.com/ [3] MT8195 power domain: https://patchwork.kernel.org/project/linux-mediatek/list/?series=580579 Changes compared with v13: - some modifications for patch v13's review comments. - fix kernel robot check errors. - fix kernel-doc check warns. - fix sparse check warns. - combine jpeg encoder series with decoder series into one single series. Changes compared with v12: - some modifications for patch v12's review comments. Changes compared with v11: - some modifications for patch v11's review comments. - fix yaml file check errors. Changes compared with v10: - some modifications for patch v10's review comments. - fix Gstreamer test errors. Changes compared with v9: - some modifications for patch v9's review comments. Changes compared with v8: - some modifications for patch v8's review comments. - add stop cmd function. Changes compared with v7: - some modifications for patch v6's review comments. Changes compared with v6: - new yaml file for mt8195 jpeg encoder. - some modifications for patch v5's review comments. Changes compared with v5: - use of_platform_populate to replace component framework to manage multi-hardware in patch 2. Changes compared with v4: - No change compaered with v4 Changes compared with v3: - Structure patches for consistency, non-backward compatible and do not break any existing functionality Changes compared with v2: - Split the last two patches into several patches to enhance readability - Correct some syntax errors - Explain why the component framework is used Changes compared with v1: - Add jpeg encoder dt-bindings for MT8195 - Use component framework to manage jpegenc HW - Add jpegenc output pic reorder function interface kyrie wu (15): dt-bindings: mediatek: Add mediatek, mt8195-jpgenc compatible mtk-jpegenc: export jpeg encoder functions mtk-jpegenc: support jpegenc multi-hardware mtk-jpegenc: add jpegenc timeout func interface mtk-jpegenc: add jpeg encode worker interface mtk-jpegenc: add output pic reorder interface mtk-jpegenc: add stop cmd interface for jpgenc dt-bindings: mediatek: Add mediatek,mt8195-jpgdec compatible media: mtk-jpegdec: export jpeg decoder functions media: mtk-jpegdec: support jpegdec multi-hardware media: mtk-jpegdec: add jpegdec timeout func interface media: mtk-jpegdec: add jpeg decode worker interface media: mtk-jpegdec: add output pic reorder interface media: mtk-jpegdec: refactor jpegdec func interface mtk-jpegdec: add stop cmd interface for jpgdec .../media/mediatek,mt8195-jpegdec.yaml | 169 ++++++ .../media/mediatek,mt8195-jpegenc.yaml | 147 ++++++ drivers/media/platform/mediatek/jpeg/Makefile | 14 +- .../platform/mediatek/jpeg/mtk_jpeg_core.c | 490 ++++++++++++++++-- .../platform/mediatek/jpeg/mtk_jpeg_core.h | 169 +++++- .../platform/mediatek/jpeg/mtk_jpeg_dec_hw.c | 315 ++++++++++- .../platform/mediatek/jpeg/mtk_jpeg_dec_hw.h | 6 +- .../platform/mediatek/jpeg/mtk_jpeg_dec_reg.h | 1 + .../platform/mediatek/jpeg/mtk_jpeg_enc_hw.c | 255 +++++++++ 9 files changed, 1483 insertions(+), 83 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml