| Message ID | 20220913142205.162399-14-sergiu.moga@microchip.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Make atmel serial driver aware of GCLK | expand |
On 13.09.2022 17:22, Sergiu Moga wrote: > Add the generic clocks for UART/USART in the sama5d2 driver to allow them > to be registered in the Common Clock Framework. > > Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> > Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Applied to clk-microchip, thanks! Hi, Stephen, I took this patch though clk-microchip and integrated it in the Microchip clock pull request. Thank you, Claudiu Beznea > --- > > > v1 -> v2: > - Added R-b tag > > > v2 -> v3: > - Nothing > > > drivers/clk/at91/sama5d2.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c > index cfd0f5e23b99..84156dc52bff 100644 > --- a/drivers/clk/at91/sama5d2.c > +++ b/drivers/clk/at91/sama5d2.c > @@ -120,6 +120,16 @@ static const struct { > struct clk_range r; > int chg_pid; > } sama5d2_gck[] = { > + { .n = "flx0_gclk", .id = 19, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "flx1_gclk", .id = 20, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "flx2_gclk", .id = 21, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "flx3_gclk", .id = 22, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "flx4_gclk", .id = 23, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "uart0_gclk", .id = 24, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "uart1_gclk", .id = 25, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "uart2_gclk", .id = 26, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "uart3_gclk", .id = 27, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "uart4_gclk", .id = 28, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > { .n = "sdmmc0_gclk", .id = 31, .chg_pid = INT_MIN, }, > { .n = "sdmmc1_gclk", .id = 32, .chg_pid = INT_MIN, }, > { .n = "tcb0_gclk", .id = 35, .chg_pid = INT_MIN, .r = { .min = 0, .max = 83000000 }, },
diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c index cfd0f5e23b99..84156dc52bff 100644 --- a/drivers/clk/at91/sama5d2.c +++ b/drivers/clk/at91/sama5d2.c @@ -120,6 +120,16 @@ static const struct { struct clk_range r; int chg_pid; } sama5d2_gck[] = { + { .n = "flx0_gclk", .id = 19, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "flx1_gclk", .id = 20, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "flx2_gclk", .id = 21, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "flx3_gclk", .id = 22, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "flx4_gclk", .id = 23, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "uart0_gclk", .id = 24, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "uart1_gclk", .id = 25, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "uart2_gclk", .id = 26, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "uart3_gclk", .id = 27, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "uart4_gclk", .id = 28, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, { .n = "sdmmc0_gclk", .id = 31, .chg_pid = INT_MIN, }, { .n = "sdmmc1_gclk", .id = 32, .chg_pid = INT_MIN, }, { .n = "tcb0_gclk", .id = 35, .chg_pid = INT_MIN, .r = { .min = 0, .max = 83000000 }, },