diff mbox series

[v2,05/44] cpuidle,riscv: Push RCU-idle into driver

Message ID 20220919101520.669962810@infradead.org (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series cpuidle,rcu: Clean up the mess | expand

Commit Message

Peter Zijlstra Sept. 19, 2022, 9:59 a.m. UTC
Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is daft.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
---
 drivers/cpuidle/cpuidle-riscv-sbi.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Comments

Anup Patel Sept. 19, 2022, 11:54 a.m. UTC | #1
On Mon, Sep 19, 2022 at 3:47 PM Peter Zijlstra <peterz@infradead.org> wrote:
>
> Doing RCU-idle outside the driver, only to then temporarily enable it
> again, at least twice, before going idle is daft.
>
> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>

Looks good to me.

For RISC-V cpuidle:
Reviewed-by: Anup Patel <anup@brainfault.org>

Regards,
Anup


> ---
>  drivers/cpuidle/cpuidle-riscv-sbi.c |    9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
>
> --- a/drivers/cpuidle/cpuidle-riscv-sbi.c
> +++ b/drivers/cpuidle/cpuidle-riscv-sbi.c
> @@ -116,12 +116,12 @@ static int __sbi_enter_domain_idle_state
>                 return -1;
>
>         /* Do runtime PM to manage a hierarchical CPU toplogy. */
> -       ct_irq_enter_irqson();
>         if (s2idle)
>                 dev_pm_genpd_suspend(pd_dev);
>         else
>                 pm_runtime_put_sync_suspend(pd_dev);
> -       ct_irq_exit_irqson();
> +
> +       ct_idle_enter();
>
>         if (sbi_is_domain_state_available())
>                 state = sbi_get_domain_state();
> @@ -130,12 +130,12 @@ static int __sbi_enter_domain_idle_state
>
>         ret = sbi_suspend(state) ? -1 : idx;
>
> -       ct_irq_enter_irqson();
> +       ct_idle_exit();
> +
>         if (s2idle)
>                 dev_pm_genpd_resume(pd_dev);
>         else
>                 pm_runtime_get_sync(pd_dev);
> -       ct_irq_exit_irqson();
>
>         cpu_pm_exit();
>
> @@ -246,6 +246,7 @@ static int sbi_dt_cpu_init_topology(stru
>          * of a shared state for the domain, assumes the domain states are all
>          * deeper states.
>          */
> +       drv->states[state_count - 1].flags |= CPUIDLE_FLAG_RCU_IDLE;
>         drv->states[state_count - 1].enter = sbi_enter_domain_idle_state;
>         drv->states[state_count - 1].enter_s2idle =
>                                         sbi_enter_s2idle_domain_idle_state;
>
>
Frederic Weisbecker Sept. 19, 2022, 1:46 p.m. UTC | #2
On Mon, Sep 19, 2022 at 11:59:44AM +0200, Peter Zijlstra wrote:
> Doing RCU-idle outside the driver, only to then temporarily enable it
> again, at least twice, before going idle is daft.
> 
> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>

Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
diff mbox series

Patch

--- a/drivers/cpuidle/cpuidle-riscv-sbi.c
+++ b/drivers/cpuidle/cpuidle-riscv-sbi.c
@@ -116,12 +116,12 @@  static int __sbi_enter_domain_idle_state
 		return -1;
 
 	/* Do runtime PM to manage a hierarchical CPU toplogy. */
-	ct_irq_enter_irqson();
 	if (s2idle)
 		dev_pm_genpd_suspend(pd_dev);
 	else
 		pm_runtime_put_sync_suspend(pd_dev);
-	ct_irq_exit_irqson();
+
+	ct_idle_enter();
 
 	if (sbi_is_domain_state_available())
 		state = sbi_get_domain_state();
@@ -130,12 +130,12 @@  static int __sbi_enter_domain_idle_state
 
 	ret = sbi_suspend(state) ? -1 : idx;
 
-	ct_irq_enter_irqson();
+	ct_idle_exit();
+
 	if (s2idle)
 		dev_pm_genpd_resume(pd_dev);
 	else
 		pm_runtime_get_sync(pd_dev);
-	ct_irq_exit_irqson();
 
 	cpu_pm_exit();
 
@@ -246,6 +246,7 @@  static int sbi_dt_cpu_init_topology(stru
 	 * of a shared state for the domain, assumes the domain states are all
 	 * deeper states.
 	 */
+	drv->states[state_count - 1].flags |= CPUIDLE_FLAG_RCU_IDLE;
 	drv->states[state_count - 1].enter = sbi_enter_domain_idle_state;
 	drv->states[state_count - 1].enter_s2idle =
 					sbi_enter_s2idle_domain_idle_state;