Message ID | 4386345.LvFx2qVVIh@tool (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2] media: cx88: add IR remote support for NotOnlyTV LV3H | expand |
Hi Daniel, Sorry about the long delay for reviewing this. I missed this patch, sorry. On Mon, Feb 07, 2022 at 03:51:41PM +0100, Daniel González Cabanelas wrote: > The PCI hybrid card NotOnlyTV LV3H has a built-in IR receiver connected > via I2C bus, currently not supported. This receiver is probably present > in more Geniatech cards. It has no capability for repeating when a key is > held down. > > Add support for this built-in IR receiver. Use the existing Total Media > In Hand_02 remote keytable (Geniatech Mygica X8507) which matches exactly > the LV3H remote. > > Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> > Signed-off-by: Marek Kidawski <mark_kiddy@wp.pl> > --- > changes in v2: > - Save a bitwise operation when no key is pressed > - Simplify the code > > drivers/media/i2c/ir-kbd-i2c.c | 47 +++++++++++++++++++++++++++++ > drivers/media/pci/cx88/cx88-input.c | 2 +- > drivers/media/pci/cx88/cx88-video.c | 1 + > include/media/i2c/ir-kbd-i2c.h | 1 + > 4 files changed, 50 insertions(+), 1 deletion(-) > > diff --git a/drivers/media/i2c/ir-kbd-i2c.c b/drivers/media/i2c/ir-kbd-i2c.c > index 566741735..145abfd13 100644 > --- a/drivers/media/i2c/ir-kbd-i2c.c > +++ b/drivers/media/i2c/ir-kbd-i2c.c > @@ -238,6 +238,43 @@ static int get_key_knc1(struct IR_i2c *ir, enum rc_proto *protocol, > return 1; > } > > +static int get_key_geniatech(struct IR_i2c *ir, enum rc_proto *protocol, > + u32 *scancode, u8 *toggle) > +{ > + int i, rc; > + unsigned char b; > + > + /* poll IR chip */ > + for (i = 0; i < 4; i++) { > + rc = i2c_master_recv(ir->c, &b, 1); > + if (rc == 1) > + break; > + msleep(1); checkpatch.pl rightfully points out the following: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst msleep(1) will sleep for at least 20ms. I think this is what you want here; mdelay(1) might introduce busy-cycles every second, surely we do not what to that. Is the sleep needed at all? Thanks Sean > + } > + if (rc != 1) { > + dev_dbg(&ir->rc->dev, "read error\n"); > + if (rc < 0) > + return rc; > + return -EIO; > + } > + > + /* don't repeat the key */ > + if (ir->old == b) > + return 0; > + ir->old = b; > + > + /* decode to RC5 */ > + b &= 0x7f; > + b = (b - 1) / 2; > + > + dev_dbg(&ir->rc->dev, "key %02x\n", b); > + > + *protocol = RC_PROTO_RC5; > + *scancode = b; > + *toggle = ir->old >> 7; > + return 1; > +} > + > static int get_key_avermedia_cardbus(struct IR_i2c *ir, enum rc_proto *protocol, > u32 *scancode, u8 *toggle) > { > @@ -766,6 +803,13 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) > rc_proto = RC_PROTO_BIT_OTHER; > ir_codes = RC_MAP_EMPTY; > break; > + case 0x33: > + name = "Geniatech"; > + ir->get_key = get_key_geniatech; > + rc_proto = RC_PROTO_BIT_RC5; > + ir_codes = RC_MAP_TOTAL_MEDIA_IN_HAND_02; > + ir->old = 0xfc; > + break; > case 0x6b: > name = "FusionHDTV"; > ir->get_key = get_key_fusionhdtv; > @@ -825,6 +869,9 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) > case IR_KBD_GET_KEY_KNC1: > ir->get_key = get_key_knc1; > break; > + case IR_KBD_GET_KEY_GENIATECH: > + ir->get_key = get_key_geniatech; > + break; > case IR_KBD_GET_KEY_FUSIONHDTV: > ir->get_key = get_key_fusionhdtv; > break; > diff --git a/drivers/media/pci/cx88/cx88-input.c b/drivers/media/pci/cx88/cx88-input.c > index ce0ef0b81..a04a1d33f 100644 > --- a/drivers/media/pci/cx88/cx88-input.c > +++ b/drivers/media/pci/cx88/cx88-input.c > @@ -586,7 +586,7 @@ void cx88_i2c_init_ir(struct cx88_core *core) > { > struct i2c_board_info info; > static const unsigned short default_addr_list[] = { > - 0x18, 0x6b, 0x71, > + 0x18, 0x33, 0x6b, 0x71, > I2C_CLIENT_END > }; > static const unsigned short pvr2000_addr_list[] = { > diff --git a/drivers/media/pci/cx88/cx88-video.c b/drivers/media/pci/cx88/cx88-video.c > index c17ad9f7d..4d78acf66 100644 > --- a/drivers/media/pci/cx88/cx88-video.c > +++ b/drivers/media/pci/cx88/cx88-video.c > @@ -1388,6 +1388,7 @@ static int cx8800_initdev(struct pci_dev *pci_dev, > } > fallthrough; > case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: > + case CX88_BOARD_NOTONLYTV_LV3H: > request_module("ir-kbd-i2c"); > } > > diff --git a/include/media/i2c/ir-kbd-i2c.h b/include/media/i2c/ir-kbd-i2c.h > index 9f47d6a48..0b58f8b9e 100644 > --- a/include/media/i2c/ir-kbd-i2c.h > +++ b/include/media/i2c/ir-kbd-i2c.h > @@ -35,6 +35,7 @@ enum ir_kbd_get_key_fn { > IR_KBD_GET_KEY_PIXELVIEW, > IR_KBD_GET_KEY_HAUP, > IR_KBD_GET_KEY_KNC1, > + IR_KBD_GET_KEY_GENIATECH, > IR_KBD_GET_KEY_FUSIONHDTV, > IR_KBD_GET_KEY_HAUP_XVR, > IR_KBD_GET_KEY_AVERMEDIA_CARDBUS, > -- > 2.35.1 > > >
Hi Sean, some amount of delay is required or the loop won't be effective enough. I made tests with delays up to 8 ms and they worked ok. The precision isn't important, so msleep will work ok here. Regards Daniel El lun, 19 sept 2022 a las 13:21, Sean Young (<sean@mess.org>) escribió: > > Hi Daniel, > > Sorry about the long delay for reviewing this. I missed this patch, sorry. > > On Mon, Feb 07, 2022 at 03:51:41PM +0100, Daniel González Cabanelas wrote: > > The PCI hybrid card NotOnlyTV LV3H has a built-in IR receiver connected > > via I2C bus, currently not supported. This receiver is probably present > > in more Geniatech cards. It has no capability for repeating when a key is > > held down. > > > > Add support for this built-in IR receiver. Use the existing Total Media > > In Hand_02 remote keytable (Geniatech Mygica X8507) which matches exactly > > the LV3H remote. > > > > Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> > > Signed-off-by: Marek Kidawski <mark_kiddy@wp.pl> > > --- > > changes in v2: > > - Save a bitwise operation when no key is pressed > > - Simplify the code > > > > drivers/media/i2c/ir-kbd-i2c.c | 47 +++++++++++++++++++++++++++++ > > drivers/media/pci/cx88/cx88-input.c | 2 +- > > drivers/media/pci/cx88/cx88-video.c | 1 + > > include/media/i2c/ir-kbd-i2c.h | 1 + > > 4 files changed, 50 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/media/i2c/ir-kbd-i2c.c b/drivers/media/i2c/ir-kbd-i2c.c > > index 566741735..145abfd13 100644 > > --- a/drivers/media/i2c/ir-kbd-i2c.c > > +++ b/drivers/media/i2c/ir-kbd-i2c.c > > @@ -238,6 +238,43 @@ static int get_key_knc1(struct IR_i2c *ir, enum rc_proto *protocol, > > return 1; > > } > > > > +static int get_key_geniatech(struct IR_i2c *ir, enum rc_proto *protocol, > > + u32 *scancode, u8 *toggle) > > +{ > > + int i, rc; > > + unsigned char b; > > + > > + /* poll IR chip */ > > + for (i = 0; i < 4; i++) { > > + rc = i2c_master_recv(ir->c, &b, 1); > > + if (rc == 1) > > + break; > > + msleep(1); > > checkpatch.pl rightfully points out the following: > > WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst > > msleep(1) will sleep for at least 20ms. I think this is what you want here; > mdelay(1) might introduce busy-cycles every second, surely we do not what to > that. > > Is the sleep needed at all? > > Thanks > > Sean > > > > + } > > + if (rc != 1) { > > + dev_dbg(&ir->rc->dev, "read error\n"); > > + if (rc < 0) > > + return rc; > > + return -EIO; > > + } > > + > > + /* don't repeat the key */ > > + if (ir->old == b) > > + return 0; > > + ir->old = b; > > + > > + /* decode to RC5 */ > > + b &= 0x7f; > > + b = (b - 1) / 2; > > + > > + dev_dbg(&ir->rc->dev, "key %02x\n", b); > > + > > + *protocol = RC_PROTO_RC5; > > + *scancode = b; > > + *toggle = ir->old >> 7; > > + return 1; > > +} > > + > > static int get_key_avermedia_cardbus(struct IR_i2c *ir, enum rc_proto *protocol, > > u32 *scancode, u8 *toggle) > > { > > @@ -766,6 +803,13 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) > > rc_proto = RC_PROTO_BIT_OTHER; > > ir_codes = RC_MAP_EMPTY; > > break; > > + case 0x33: > > + name = "Geniatech"; > > + ir->get_key = get_key_geniatech; > > + rc_proto = RC_PROTO_BIT_RC5; > > + ir_codes = RC_MAP_TOTAL_MEDIA_IN_HAND_02; > > + ir->old = 0xfc; > > + break; > > case 0x6b: > > name = "FusionHDTV"; > > ir->get_key = get_key_fusionhdtv; > > @@ -825,6 +869,9 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) > > case IR_KBD_GET_KEY_KNC1: > > ir->get_key = get_key_knc1; > > break; > > + case IR_KBD_GET_KEY_GENIATECH: > > + ir->get_key = get_key_geniatech; > > + break; > > case IR_KBD_GET_KEY_FUSIONHDTV: > > ir->get_key = get_key_fusionhdtv; > > break; > > diff --git a/drivers/media/pci/cx88/cx88-input.c b/drivers/media/pci/cx88/cx88-input.c > > index ce0ef0b81..a04a1d33f 100644 > > --- a/drivers/media/pci/cx88/cx88-input.c > > +++ b/drivers/media/pci/cx88/cx88-input.c > > @@ -586,7 +586,7 @@ void cx88_i2c_init_ir(struct cx88_core *core) > > { > > struct i2c_board_info info; > > static const unsigned short default_addr_list[] = { > > - 0x18, 0x6b, 0x71, > > + 0x18, 0x33, 0x6b, 0x71, > > I2C_CLIENT_END > > }; > > static const unsigned short pvr2000_addr_list[] = { > > diff --git a/drivers/media/pci/cx88/cx88-video.c b/drivers/media/pci/cx88/cx88-video.c > > index c17ad9f7d..4d78acf66 100644 > > --- a/drivers/media/pci/cx88/cx88-video.c > > +++ b/drivers/media/pci/cx88/cx88-video.c > > @@ -1388,6 +1388,7 @@ static int cx8800_initdev(struct pci_dev *pci_dev, > > } > > fallthrough; > > case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: > > + case CX88_BOARD_NOTONLYTV_LV3H: > > request_module("ir-kbd-i2c"); > > } > > > > diff --git a/include/media/i2c/ir-kbd-i2c.h b/include/media/i2c/ir-kbd-i2c.h > > index 9f47d6a48..0b58f8b9e 100644 > > --- a/include/media/i2c/ir-kbd-i2c.h > > +++ b/include/media/i2c/ir-kbd-i2c.h > > @@ -35,6 +35,7 @@ enum ir_kbd_get_key_fn { > > IR_KBD_GET_KEY_PIXELVIEW, > > IR_KBD_GET_KEY_HAUP, > > IR_KBD_GET_KEY_KNC1, > > + IR_KBD_GET_KEY_GENIATECH, > > IR_KBD_GET_KEY_FUSIONHDTV, > > IR_KBD_GET_KEY_HAUP_XVR, > > IR_KBD_GET_KEY_AVERMEDIA_CARDBUS, > > -- > > 2.35.1 > > > > > >
diff --git a/drivers/media/i2c/ir-kbd-i2c.c b/drivers/media/i2c/ir-kbd-i2c.c index 566741735..145abfd13 100644 --- a/drivers/media/i2c/ir-kbd-i2c.c +++ b/drivers/media/i2c/ir-kbd-i2c.c @@ -238,6 +238,43 @@ static int get_key_knc1(struct IR_i2c *ir, enum rc_proto *protocol, return 1; } +static int get_key_geniatech(struct IR_i2c *ir, enum rc_proto *protocol, + u32 *scancode, u8 *toggle) +{ + int i, rc; + unsigned char b; + + /* poll IR chip */ + for (i = 0; i < 4; i++) { + rc = i2c_master_recv(ir->c, &b, 1); + if (rc == 1) + break; + msleep(1); + } + if (rc != 1) { + dev_dbg(&ir->rc->dev, "read error\n"); + if (rc < 0) + return rc; + return -EIO; + } + + /* don't repeat the key */ + if (ir->old == b) + return 0; + ir->old = b; + + /* decode to RC5 */ + b &= 0x7f; + b = (b - 1) / 2; + + dev_dbg(&ir->rc->dev, "key %02x\n", b); + + *protocol = RC_PROTO_RC5; + *scancode = b; + *toggle = ir->old >> 7; + return 1; +} + static int get_key_avermedia_cardbus(struct IR_i2c *ir, enum rc_proto *protocol, u32 *scancode, u8 *toggle) { @@ -766,6 +803,13 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) rc_proto = RC_PROTO_BIT_OTHER; ir_codes = RC_MAP_EMPTY; break; + case 0x33: + name = "Geniatech"; + ir->get_key = get_key_geniatech; + rc_proto = RC_PROTO_BIT_RC5; + ir_codes = RC_MAP_TOTAL_MEDIA_IN_HAND_02; + ir->old = 0xfc; + break; case 0x6b: name = "FusionHDTV"; ir->get_key = get_key_fusionhdtv; @@ -825,6 +869,9 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) case IR_KBD_GET_KEY_KNC1: ir->get_key = get_key_knc1; break; + case IR_KBD_GET_KEY_GENIATECH: + ir->get_key = get_key_geniatech; + break; case IR_KBD_GET_KEY_FUSIONHDTV: ir->get_key = get_key_fusionhdtv; break; diff --git a/drivers/media/pci/cx88/cx88-input.c b/drivers/media/pci/cx88/cx88-input.c index ce0ef0b81..a04a1d33f 100644 --- a/drivers/media/pci/cx88/cx88-input.c +++ b/drivers/media/pci/cx88/cx88-input.c @@ -586,7 +586,7 @@ void cx88_i2c_init_ir(struct cx88_core *core) { struct i2c_board_info info; static const unsigned short default_addr_list[] = { - 0x18, 0x6b, 0x71, + 0x18, 0x33, 0x6b, 0x71, I2C_CLIENT_END }; static const unsigned short pvr2000_addr_list[] = { diff --git a/drivers/media/pci/cx88/cx88-video.c b/drivers/media/pci/cx88/cx88-video.c index c17ad9f7d..4d78acf66 100644 --- a/drivers/media/pci/cx88/cx88-video.c +++ b/drivers/media/pci/cx88/cx88-video.c @@ -1388,6 +1388,7 @@ static int cx8800_initdev(struct pci_dev *pci_dev, } fallthrough; case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: + case CX88_BOARD_NOTONLYTV_LV3H: request_module("ir-kbd-i2c"); } diff --git a/include/media/i2c/ir-kbd-i2c.h b/include/media/i2c/ir-kbd-i2c.h index 9f47d6a48..0b58f8b9e 100644 --- a/include/media/i2c/ir-kbd-i2c.h +++ b/include/media/i2c/ir-kbd-i2c.h @@ -35,6 +35,7 @@ enum ir_kbd_get_key_fn { IR_KBD_GET_KEY_PIXELVIEW, IR_KBD_GET_KEY_HAUP, IR_KBD_GET_KEY_KNC1, + IR_KBD_GET_KEY_GENIATECH, IR_KBD_GET_KEY_FUSIONHDTV, IR_KBD_GET_KEY_HAUP_XVR, IR_KBD_GET_KEY_AVERMEDIA_CARDBUS,