diff mbox series

[v4,07/13] i2c: acpi: Use ACPI wake capability bit to set wake_irq

Message ID 20220919095504.v4.7.I8af4282adc72eb9f247adcd03676a43893a020a6@changeid (mailing list archive)
State Superseded, archived
Headers show
Series acpi: i2c: Use SharedAndWake and ExclusiveAndWake to enable wake irq | expand

Commit Message

Raul Rangel Sept. 19, 2022, 3:59 p.m. UTC 
Device tree already has a mechanism to pass the wake_irq. It does this
by looking for the wakeup-source property and setting the
I2C_CLIENT_WAKE flag. This CL adds the ACPI equivalent. It uses the
ACPI interrupt wake flag to determine if the interrupt can be used to
wake the system. Previously the i2c drivers had to make assumptions and
blindly enable the wake IRQ. This can cause spurious wake events. e.g.,
If there is a device with an Active Low interrupt and the device gets
powered off while suspending, the interrupt line will go low since it's
no longer powered and wakes the system. For this reason we should
respect the board designers wishes and honor the wake bit defined on the
interrupt.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

---

Changes in v4:
- Removed unnecessary !!
- Removed unrelated whitespace change
- Added Reviewed-by
- Renamed i2c_acpi_add_resource to i2c_acpi_add_irq_resource
- Expanded logic in i2c_acpi_add_i2c_resource to make it easier to read

Changes in v3:
- Convert wake_capable to bool
- Only update wake_capable pointer once
- Move wake_capable local into local block

Changes in v2:
- Look at wake_cabple bit for IRQ/Interrupt resources

 drivers/i2c/i2c-core-acpi.c | 37 +++++++++++++++++++++++++++----------
 drivers/i2c/i2c-core-base.c |  6 +++++-
 drivers/i2c/i2c-core.h      |  4 ++--
 3 files changed, 34 insertions(+), 13 deletions(-)

Comments

Andy Shevchenko Sept. 20, 2022, 12:32 p.m. UTC | #1 
On Mon, Sep 19, 2022 at 09:59:09AM -0600, Raul E Rangel wrote:
> Device tree already has a mechanism to pass the wake_irq. It does this
> by looking for the wakeup-source property and setting the
> I2C_CLIENT_WAKE flag. This CL adds the ACPI equivalent. It uses the
> ACPI interrupt wake flag to determine if the interrupt can be used to
> wake the system. Previously the i2c drivers had to make assumptions and
> blindly enable the wake IRQ. This can cause spurious wake events. e.g.,
> If there is a device with an Active Low interrupt and the device gets
> powered off while suspending, the interrupt line will go low since it's
> no longer powered and wakes the system. For this reason we should
> respect the board designers wishes and honor the wake bit defined on the
> interrupt.

...

> +	if (irq_ctx.irq == -ENOENT)
> +		irq_ctx.irq = acpi_dev_gpio_irq_wake_get(adev, 0, &irq_ctx.wake_capable);

I just realized, that there is an inconsistency on how we fill the wake_capable
parameter. In some cases we check for IRQ for an error condition (IRQ not found)
and in some the wake_capable still be filled.

Here the best approach I believe is to add

	if (irq_ctx.irq < 0)
		return irq_ctx.irq;

I.o.w. we apply the rule "do not fill the output parameters when it's known
to be an error condition".

> +	if (wake_capable)
> +		*wake_capable = irq_ctx.wake_capable;

> +	return irq_ctx.irq;
Raul Rangel Sept. 21, 2022, 3:18 p.m. UTC | #2 
On Tue, Sep 20, 2022 at 6:32 AM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> On Mon, Sep 19, 2022 at 09:59:09AM -0600, Raul E Rangel wrote:
> > Device tree already has a mechanism to pass the wake_irq. It does this
> > by looking for the wakeup-source property and setting the
> > I2C_CLIENT_WAKE flag. This CL adds the ACPI equivalent. It uses the
> > ACPI interrupt wake flag to determine if the interrupt can be used to
> > wake the system. Previously the i2c drivers had to make assumptions and
> > blindly enable the wake IRQ. This can cause spurious wake events. e.g.,
> > If there is a device with an Active Low interrupt and the device gets
> > powered off while suspending, the interrupt line will go low since it's
> > no longer powered and wakes the system. For this reason we should
> > respect the board designers wishes and honor the wake bit defined on the
> > interrupt.
>
> ...
>
> > +     if (irq_ctx.irq == -ENOENT)
> > +             irq_ctx.irq = acpi_dev_gpio_irq_wake_get(adev, 0, &irq_ctx.wake_capable);
>
> I just realized, that there is an inconsistency on how we fill the wake_capable
> parameter. In some cases we check for IRQ for an error condition (IRQ not found)
> and in some the wake_capable still be filled.
>
> Here the best approach I believe is to add
>
>         if (irq_ctx.irq < 0)
>                 return irq_ctx.irq;
>
> I.o.w. we apply the rule "do not fill the output parameters when it's known
> to be an error condition".
>
> > +     if (wake_capable)
> > +             *wake_capable = irq_ctx.wake_capable;
>
> > +     return irq_ctx.irq;
>

I applied the following:
diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
index ba64e505183595..1618f5619d5ed9 100644
--- a/drivers/i2c/i2c-core-acpi.c
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -220,7 +220,7 @@ int i2c_acpi_get_irq(struct i2c_client *client,
bool *wake_capable)
        if (irq_ctx.irq == -ENOENT)
                irq_ctx.irq = acpi_dev_gpio_irq_wake_get(adev, 0,
&irq_ctx.wake_capable);

-       if (wake_capable)
+       if (irq_ctx.irq > 0 && wake_capable)
                *wake_capable = irq_ctx.wake_capable;

        return irq_ctx.irq;

Thanks!
Andy Shevchenko Sept. 22, 2022, 9:44 a.m. UTC | #3 
On Wed, Sep 21, 2022 at 09:18:34AM -0600, Raul Rangel wrote:
> On Tue, Sep 20, 2022 at 6:32 AM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> > On Mon, Sep 19, 2022 at 09:59:09AM -0600, Raul E Rangel wrote:

...

> > > +     if (irq_ctx.irq == -ENOENT)
> > > +             irq_ctx.irq = acpi_dev_gpio_irq_wake_get(adev, 0, &irq_ctx.wake_capable);
> >
> > I just realized, that there is an inconsistency on how we fill the wake_capable
> > parameter. In some cases we check for IRQ for an error condition (IRQ not found)
> > and in some the wake_capable still be filled.
> >
> > Here the best approach I believe is to add
> >
> >         if (irq_ctx.irq < 0)
> >                 return irq_ctx.irq;
> >
> > I.o.w. we apply the rule "do not fill the output parameters when it's known
> > to be an error condition".
> >
> > > +     if (wake_capable)
> > > +             *wake_capable = irq_ctx.wake_capable;
> >
> > > +     return irq_ctx.irq;
> >
> 
> I applied the following:
> diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
> index ba64e505183595..1618f5619d5ed9 100644
> --- a/drivers/i2c/i2c-core-acpi.c
> +++ b/drivers/i2c/i2c-core-acpi.c
> @@ -220,7 +220,7 @@ int i2c_acpi_get_irq(struct i2c_client *client,
> bool *wake_capable)
>         if (irq_ctx.irq == -ENOENT)
>                 irq_ctx.irq = acpi_dev_gpio_irq_wake_get(adev, 0,
> &irq_ctx.wake_capable);
> 
> -       if (wake_capable)
> +       if (irq_ctx.irq > 0 && wake_capable)
>                 *wake_capable = irq_ctx.wake_capable;
> 
>         return irq_ctx.irq;

While it's working solution it is not so flexible since basically any addition
of a new code will require if (irq > 0), that's why I'm in favour of my
proposal rather than yours approach.
diff mbox series

Patch

diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
index c762a879c4cc6b..ba64e505183595 100644
--- a/drivers/i2c/i2c-core-acpi.c
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -137,6 +137,11 @@  static const struct acpi_device_id i2c_acpi_ignored_device_ids[] = {
 	{}
 };
 
+struct i2c_acpi_irq_context {
+	int irq;
+	bool wake_capable;
+};
+
 static int i2c_acpi_do_lookup(struct acpi_device *adev,
 			      struct i2c_acpi_lookup *lookup)
 {
@@ -168,13 +173,19 @@  static int i2c_acpi_do_lookup(struct acpi_device *adev,
 	return 0;
 }
 
-static int i2c_acpi_add_resource(struct acpi_resource *ares, void *data)
+static int i2c_acpi_add_irq_resource(struct acpi_resource *ares, void *data)
 {
-	int *irq = data;
+	struct i2c_acpi_irq_context *irq_ctx = data;
 	struct resource r;
 
-	if (*irq <= 0 && acpi_dev_resource_interrupt(ares, 0, &r))
-		*irq = i2c_dev_irq_from_resources(&r, 1);
+	if (irq_ctx->irq > 0)
+		return 1;
+
+	if (!acpi_dev_resource_interrupt(ares, 0, &r))
+		return 1;
+
+	irq_ctx->irq = i2c_dev_irq_from_resources(&r, 1);
+	irq_ctx->wake_capable = r.flags & IORESOURCE_IRQ_WAKECAPABLE;
 
 	return 1; /* No need to add resource to the list */
 }
@@ -182,31 +193,37 @@  static int i2c_acpi_add_resource(struct acpi_resource *ares, void *data)
 /**
  * i2c_acpi_get_irq - get device IRQ number from ACPI
  * @client: Pointer to the I2C client device
+ * @wake_capable: Set to true if the IRQ is wake capable
  *
  * Find the IRQ number used by a specific client device.
  *
  * Return: The IRQ number or an error code.
  */
-int i2c_acpi_get_irq(struct i2c_client *client)
+int i2c_acpi_get_irq(struct i2c_client *client, bool *wake_capable)
 {
 	struct acpi_device *adev = ACPI_COMPANION(&client->dev);
 	struct list_head resource_list;
-	int irq = -ENOENT;
+	struct i2c_acpi_irq_context irq_ctx = {
+		.irq = -ENOENT,
+	};
 	int ret;
 
 	INIT_LIST_HEAD(&resource_list);
 
 	ret = acpi_dev_get_resources(adev, &resource_list,
-				     i2c_acpi_add_resource, &irq);
+				     i2c_acpi_add_irq_resource, &irq_ctx);
 	if (ret < 0)
 		return ret;
 
 	acpi_dev_free_resource_list(&resource_list);
 
-	if (irq == -ENOENT)
-		irq = acpi_dev_gpio_irq_get(adev, 0);
+	if (irq_ctx.irq == -ENOENT)
+		irq_ctx.irq = acpi_dev_gpio_irq_wake_get(adev, 0, &irq_ctx.wake_capable);
+
+	if (wake_capable)
+		*wake_capable = irq_ctx.wake_capable;
 
-	return irq;
+	return irq_ctx.irq;
 }
 
 static int i2c_acpi_get_info(struct acpi_device *adev,
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 91007558bcb260..fc4b85fb90b1b7 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -487,7 +487,11 @@  static int i2c_device_probe(struct device *dev)
 			if (irq == -EINVAL || irq == -ENODATA)
 				irq = of_irq_get(dev->of_node, 0);
 		} else if (ACPI_COMPANION(dev)) {
-			irq = i2c_acpi_get_irq(client);
+			bool wake_capable;
+
+			irq = i2c_acpi_get_irq(client, &wake_capable);
+			if (irq > 0 && wake_capable)
+				client->flags |= I2C_CLIENT_WAKE;
 		}
 		if (irq == -EPROBE_DEFER) {
 			status = irq;
diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h
index 87e2c914f1c57b..1247e6e6e97517 100644
--- a/drivers/i2c/i2c-core.h
+++ b/drivers/i2c/i2c-core.h
@@ -61,11 +61,11 @@  static inline int __i2c_check_suspended(struct i2c_adapter *adap)
 #ifdef CONFIG_ACPI
 void i2c_acpi_register_devices(struct i2c_adapter *adap);
 
-int i2c_acpi_get_irq(struct i2c_client *client);
+int i2c_acpi_get_irq(struct i2c_client *client, bool *wake_capable);
 #else /* CONFIG_ACPI */
 static inline void i2c_acpi_register_devices(struct i2c_adapter *adap) { }
 
-static inline int i2c_acpi_get_irq(struct i2c_client *client)
+static inline int i2c_acpi_get_irq(struct i2c_client *client, bool *wake_capable)
 {
 	return 0;
 }