| Message ID | 20220922101211.3215888-3-foss+kernel@0leil.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | add support for Theobroma Systems PX30-��Q7 (Ringneck) with Haikou devkit | expand |
Hi all, On 9/22/22 12:12, Quentin Schulz wrote: [...] > diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi > new file mode 100644 > index 000000000000..74a7f1182c21 > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi > @@ -0,0 +1,347 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH > + */ > + > +/dts-v1/; > +#include "px30.dtsi" > + > +/ { > + aliases { > + mmc0 = &emmc; > + mmc1 = &sdio; > + rtc0 = &rtc_twi; > + rtc1 = &rk809; > + }; > + > + emmc_pwrseq: emmc-pwrseq { > + compatible = "mmc-pwrseq-emmc"; > + pinctrl-0 = <&emmc_reset>; > + pinctrl-names = "default"; > + reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&module_led_pin>; > + status = "okay"; > + > + module_led: led-0 { > + label = "module_led"; > + gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + }; > + }; > + > + vcc5v0_sys: vccsys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > +}; > + > +&cpu0 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&cpu1 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&cpu2 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&cpu3 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&emmc { > + bus-width = <8>; > + cap-mmc-highspeed; > + mmc-hs200-1_8v; > + supports-emmc; > + mmc-pwrseq = <&emmc_pwrseq>; > + non-removable; > + vmmc-supply = <&vcc_3v3>; > + vqmmc-supply = <&vcc_emmc>; > + > + status = "okay"; > +}; > + > +/* On-module TI DP83825I PHY but no connector, enable in carrierboard */ > +&gmac { > + snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; > + snps,reset-active-low; > + snps,reset-delays-us = <0 50000 50000>; > + phy-supply = <&vcc_3v3>; > + clock_in_out = "output"; > +}; > + I forgot: &gpio2 { /* * The Qseven BIOS_DISABLE signal on the PX30-µQ7 keeps the on-module * eMMC powered-down initially (in fact it keeps the reset signal * asserted). BIOS_DISABLE_OVERRIDE pin allows to re-enable eMMC. */ bios_disable_override { gpios = <RK_PB5 GPIO_ACTIVE_LOW>; output-high; line-name = "bios_disable_override"; gpio-hog; }; }; Since I had this change in the bootloader that was enough during my tests, but better not rely on the bootloader whenever/wherever possible :) I'll wait a bit for reviews before sending a v2 just for that. Cheers, Quentin
On 22/09/2022 12:12, Quentin Schulz wrote: > From: Quentin Schulz <quentin.schulz@theobroma-systems.com> > > The PX30-uQ7 (Ringneck) SoM is a µQseven-compatible (40mmx70mm, MXM-230 > connector) system-on-module from Theobroma Systems[1], featuring the > Rockchip PX30. > > It provides the following feature set: > * up to 4GB DDR4 > * up to 128GB on-module eMMC (with 8-bit 1.8V interface) > * SD card (on a baseboard) via edge connector > * Fast Ethernet with on-module TI DP83825I PHY > * MIPI-DSI/LVDS > * MIPI-CSI > * USB > - 1x USB 2.0 dual-role > - 3x USB 2.0 host > * on-module STM32 Cortex-M0 companion controller, implementing: > - low-power RTC functionality (ISL1208 emulation) > - fan controller (AMC6821 emulation) > - USB<->CAN bridge controller > * on-module Espressif ESP32 for Bluetooth + 2.4GHz WiFi > * on-module NXP SE05x Secure Element > > [1] https://www.theobroma-systems.com/som-product/px30-%C2%B5q7/ > > Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> > --- > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../dts/rockchip/px30-ringneck-haikou.dts | 239 ++++++++++++ > .../boot/dts/rockchip/px30-ringneck.dtsi | 347 ++++++++++++++++++ > 3 files changed, 587 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts > create mode 100644 arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > index ef79a672804a..1e3b9d7c1a8b 100644 > --- a/arch/arm64/boot/dts/rockchip/Makefile > +++ b/arch/arm64/boot/dts/rockchip/Makefile > @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb > +dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb > diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts > new file mode 100644 > index 000000000000..6304d6f7baa3 > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts > @@ -0,0 +1,239 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH > + */ > + > +/dts-v1/; > +#include "px30-ringneck.dtsi" > +#include <dt-bindings/input/input.h> > + > +/ { > + model = "Theobroma Systems PX30-µQ7 SoM on Haikou devkit"; > + compatible = "tsd,px30-ringneck-haikou", "rockchip,px30"; > + > + aliases { > + mmc2 = &sdmmc; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + gpio_keys: haikou-keys { By convention node name is gpio-keys > + compatible = "gpio-keys"; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-0 = <&haikou_keys_pin>; > + pinctrl-names = "default"; > + > + BATLOWn { Does not look like you tested the DTS against bindings. Please run `make dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). Missing generic node name, only lowercase characters. > + label = "BATLOW#"; > + linux,code = <KEY_BATTERY>; > + gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; > + }; > + > + BIOS_DISABLEn { > + label = "BIOS_DISABLE#"; > + linux,code = <SW_BOOT_ALT>; > + linux,input-type = <EV_SW>; > + gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; > + }; > + > + LID_BTNn { > + label = "LID_BTN#"; > + linux,code = <SW_LID>; > + linux,input-type = <EV_SW>; > + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; > + }; > + > + SLP_BTNn { > + label = "SLP_BTN#"; > + linux,code = <KEY_SLEEP>; > + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; > + }; > + > + WAKEn { > + label = "WAKE#"; > + linux,code = <KEY_WAKEUP>; > + gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>; > + wakeup-source; > + }; > + }; > + > + leds { > + pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>; > + > + sd_card_led: led-1 { > + label = "sd_card_led"; > + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "mmc2"; > + }; > + }; > + > + i2s0-sound { > + compatible = "simple-audio-card"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,name = "Haikou,I2S-codec"; > + simple-audio-card,mclk-fs = <512>; > + > + simple-audio-card,codec { > + clocks = <&sgtl5000_clk>; > + sound-dai = <&sgtl5000>; > + }; > + > + simple-audio-card,cpu { > + bitclock-master; > + frame-master; > + sound-dai = <&i2s0_8ch>; > + }; > + }; > + > + sgtl5000_clk: sgtl5000-oscillator { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24576000>; > + }; > + > + dc_12v: dc-12v { Node names should be generic. https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation So at least generic ("regulator") prefix or suffix. > + compatible = "regulator-fixed"; > + regulator-name = "dc_12v"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + }; > + > + vcc3v3_baseboard: vcc3v3-baseboard { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_baseboard"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&dc_12v>; > + }; > + > + vcc5v0_baseboard: vcc5v0-baseboard { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_baseboard"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&dc_12v>; > + }; > + > + vdda_codec: vdda-codec { > + compatible = "regulator-fixed"; > + regulator-name = "vdda_codec"; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc5v0_baseboard>; > + }; > + > + vddd_codec: vddd-codec { > + compatible = "regulator-fixed"; > + regulator-name = "vddd_codec"; > + regulator-boot-on; > + regulator-min-microvolt = <1600000>; > + regulator-max-microvolt = <1600000>; > + vin-supply = <&vcc5v0_baseboard>; > + }; > +}; > + > +&i2c2 { > + status = "okay"; > + clock-frequency = <400000>; > + > + sgtl5000: codec@a { > + compatible = "fsl,sgtl5000"; > + reg = <0x0a>; > + clocks = <&sgtl5000_clk>; > + #sound-dai-cells = <0>; > + VDDA-supply = <&vdda_codec>; > + VDDIO-supply = <&vcc3v3_baseboard>; > + VDDD-supply = <&vddd_codec>; > + status = "okay"; Okay is by default. > + }; > +}; > + > +&i2c3 { > + status = "okay"; > + > + eeprom@50 { > + reg = <0x50>; > + compatible = "atmel,24c01"; > + pagesize = <8>; > + size = <128>; > + vcc-supply = <&vcc3v3_baseboard>; > + }; > +}; > + > +&i2s0_8ch { > + status = "okay"; > +}; > + > +&gmac { > + status = "okay"; > +}; > + > +&pinctrl { > + haikou { > + haikou_keys_pin: haikou-keys-pin { > + rockchip,pins = > + /* WAKE# */ > + <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, > + /* SLP_BTN# */ > + <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, > + /* LID_BTN */ > + <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, > + /* BATLOW# */ > + <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, > + /* BIOS_DISABLE# */ > + <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + leds { > + sd_card_led_pin: sd-card-led-pin { > + rockchip,pins = > + <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&sdmmc { > + bus-width = <4>; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; > + disable-wp; > + vmmc-supply = <&vcc3v3_baseboard>; > + status = "okay"; > +}; > + > +&spi1 { > + status = "okay"; > +}; > + > +&u2phy_otg { > + status = "okay"; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&uart5 { > + pinctrl-0 = <&uart5_xfer>; > + status = "okay"; > +}; > + > +&usb20_otg { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi > new file mode 100644 > index 000000000000..74a7f1182c21 > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi > @@ -0,0 +1,347 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH > + */ > + > +/dts-v1/; > +#include "px30.dtsi" > + > +/ { > + aliases { > + mmc0 = &emmc; > + mmc1 = &sdio; > + rtc0 = &rtc_twi; > + rtc1 = &rk809; > + }; > + > + emmc_pwrseq: emmc-pwrseq { > + compatible = "mmc-pwrseq-emmc"; > + pinctrl-0 = <&emmc_reset>; > + pinctrl-names = "default"; > + reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; > + }; > + > + leds { > + compatible = "gpio-leds"; This belongs to DTSI. > + pinctrl-names = "default"; > + pinctrl-0 = <&module_led_pin>; > + status = "okay"; No need. > + > + module_led: led-0 { Why DTSI - which in logic comes first - starts with 1 and this is 0?\ > + label = "module_led"; > + gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + }; > + }; > + > + vcc5v0_sys: vccsys { Node names should be generic. https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > +}; > + > +&cpu0 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&cpu1 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&cpu2 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&cpu3 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&emmc { > + bus-width = <8>; > + cap-mmc-highspeed; > + mmc-hs200-1_8v; > + supports-emmc; > + mmc-pwrseq = <&emmc_pwrseq>; > + non-removable; > + vmmc-supply = <&vcc_3v3>; > + vqmmc-supply = <&vcc_emmc>; > + > + status = "okay"; > +}; > + > +/* On-module TI DP83825I PHY but no connector, enable in carrierboard */ > +&gmac { > + snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; > + snps,reset-active-low; > + snps,reset-delays-us = <0 50000 50000>; > + phy-supply = <&vcc_3v3>; > + clock_in_out = "output"; > +}; > + > +&gpu { > + status = "okay"; > +}; > + > +&i2c0 { > + status = "okay"; > + > + rk809: pmic@20 { > + compatible = "rockchip,rk809"; > + reg = <0x20>; > + interrupt-parent = <&gpio0>; > + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-0 = <&pmic_int>; > + pinctrl-names = "default"; > + #clock-cells = <0>; > + clock-output-names = "xin32k"; > + rockchip,system-power-controller; > + wakeup-source; > + status = "okay"; No need. > + > + vcc1-supply = <&vcc5v0_sys>; > + vcc2-supply = <&vcc5v0_sys>; > + vcc3-supply = <&vcc5v0_sys>; > + vcc4-supply = <&vcc5v0_sys>; > + vcc5-supply = <&vcc_3v3>; > + vcc6-supply = <&vcc_3v3>; > + vcc7-supply = <&vcc_3v3>; > + vcc9-supply = <&vcc5v0_sys>; > + (...) > +&pinctrl { > + emmc { > + emmc_reset: emmc-reset { > + rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + leds { > + module_led_pin: module-led-pin { > + rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pmic { > + pmic_int: pmic_int { No underscores in node names. > + rockchip,pins = > + <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + Skip unneeded blank lines. > +}; > + > +&tsadc { > + status = "okay"; > +}; > + > +&u2phy { > + status = "okay"; > +}; > + > +&u2phy_host { > + status = "okay"; > +}; > + > +/* Mule UCAN */ > +&usb_host0_ehci { > + status = "okay"; > +}; > + > +&usb_host0_ohci { > + status = "okay"; > +}; > + > +&wdt { > + status = "okay"; > +}; Best regards, Krzysztof
Hi Krzysztof, On 9/22/22 14:45, Krzysztof Kozlowski wrote: > On 22/09/2022 12:12, Quentin Schulz wrote: [...] >> diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi >> new file mode 100644 >> index 000000000000..74a7f1182c21 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi >> @@ -0,0 +1,347 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) >> +/* >> + * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH >> + */ >> + >> +/dts-v1/; >> +#include "px30.dtsi" >> + >> +/ { >> + aliases { >> + mmc0 = &emmc; >> + mmc1 = &sdio; >> + rtc0 = &rtc_twi; >> + rtc1 = &rk809; >> + }; >> + >> + emmc_pwrseq: emmc-pwrseq { >> + compatible = "mmc-pwrseq-emmc"; >> + pinctrl-0 = <&emmc_reset>; >> + pinctrl-names = "default"; >> + reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; >> + }; >> + >> + leds { >> + compatible = "gpio-leds"; > > This belongs to DTSI. > It is in the DTSI :) >> + pinctrl-names = "default"; >> + pinctrl-0 = <&module_led_pin>; >> + status = "okay"; > > No need. > >> + >> + module_led: led-0 { > > Why DTSI - which in logic comes first - starts with 1 and this is 0?\ > The first diff in this patch is for the DTS, this is now the DTSI. So it does have led-0 in the DTSI and led-1 in the DTS which I think is what you're requesting here? Is this a correct assumption? Ack for all other review comments, thanks! Cheers, Quentin
On 23/09/2022 11:55, Quentin Schulz wrote: >>> + >>> + leds { >>> + compatible = "gpio-leds"; >> >> This belongs to DTSI. >> > > It is in the DTSI :) Ah, right... > >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&module_led_pin>; >>> + status = "okay"; >> >> No need. >> >>> + >>> + module_led: led-0 { >> >> Why DTSI - which in logic comes first - starts with 1 and this is 0?\ >> > > The first diff in this patch is for the DTS, this is now the DTSI. So it > does have led-0 in the DTSI and led-1 in the DTS which I think is what > you're requesting here? Is this a correct assumption? Yep. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index ef79a672804a..1e3b9d7c1a8b 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts new file mode 100644 index 000000000000..6304d6f7baa3 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts @@ -0,0 +1,239 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH + */ + +/dts-v1/; +#include "px30-ringneck.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Theobroma Systems PX30-µQ7 SoM on Haikou devkit"; + compatible = "tsd,px30-ringneck-haikou", "rockchip,px30"; + + aliases { + mmc2 = &sdmmc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio_keys: haikou-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&haikou_keys_pin>; + pinctrl-names = "default"; + + BATLOWn { + label = "BATLOW#"; + linux,code = <KEY_BATTERY>; + gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; + }; + + BIOS_DISABLEn { + label = "BIOS_DISABLE#"; + linux,code = <SW_BOOT_ALT>; + linux,input-type = <EV_SW>; + gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; + }; + + LID_BTNn { + label = "LID_BTN#"; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; + }; + + SLP_BTNn { + label = "SLP_BTN#"; + linux,code = <KEY_SLEEP>; + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; + }; + + WAKEn { + label = "WAKE#"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + leds { + pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>; + + sd_card_led: led-1 { + label = "sd_card_led"; + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc2"; + }; + }; + + i2s0-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Haikou,I2S-codec"; + simple-audio-card,mclk-fs = <512>; + + simple-audio-card,codec { + clocks = <&sgtl5000_clk>; + sound-dai = <&sgtl5000>; + }; + + simple-audio-card,cpu { + bitclock-master; + frame-master; + sound-dai = <&i2s0_8ch>; + }; + }; + + sgtl5000_clk: sgtl5000-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_baseboard: vcc3v3-baseboard { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_baseboard"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_baseboard: vcc5v0-baseboard { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_baseboard"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vdda_codec: vdda-codec { + compatible = "regulator-fixed"; + regulator-name = "vdda_codec"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_baseboard>; + }; + + vddd_codec: vddd-codec { + compatible = "regulator-fixed"; + regulator-name = "vddd_codec"; + regulator-boot-on; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1600000>; + vin-supply = <&vcc5v0_baseboard>; + }; +}; + +&i2c2 { + status = "okay"; + clock-frequency = <400000>; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&sgtl5000_clk>; + #sound-dai-cells = <0>; + VDDA-supply = <&vdda_codec>; + VDDIO-supply = <&vcc3v3_baseboard>; + VDDD-supply = <&vddd_codec>; + status = "okay"; + }; +}; + +&i2c3 { + status = "okay"; + + eeprom@50 { + reg = <0x50>; + compatible = "atmel,24c01"; + pagesize = <8>; + size = <128>; + vcc-supply = <&vcc3v3_baseboard>; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&gmac { + status = "okay"; +}; + +&pinctrl { + haikou { + haikou_keys_pin: haikou-keys-pin { + rockchip,pins = + /* WAKE# */ + <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + /* SLP_BTN# */ + <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + /* LID_BTN */ + <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + /* BATLOW# */ + <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + /* BIOS_DISABLE# */ + <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + sd_card_led_pin: sd-card-led-pin { + rockchip,pins = + <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; + disable-wp; + vmmc-supply = <&vcc3v3_baseboard>; + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart5 { + pinctrl-0 = <&uart5_xfer>; + status = "okay"; +}; + +&usb20_otg { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi new file mode 100644 index 000000000000..74a7f1182c21 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi @@ -0,0 +1,347 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH + */ + +/dts-v1/; +#include "px30.dtsi" + +/ { + aliases { + mmc0 = &emmc; + mmc1 = &sdio; + rtc0 = &rtc_twi; + rtc1 = &rk809; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&module_led_pin>; + status = "okay"; + + module_led: led-0 { + label = "module_led"; + gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc5v0_sys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + supports-emmc; + mmc-pwrseq = <&emmc_pwrseq>; + non-removable; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_emmc>; + + status = "okay"; +}; + +/* On-module TI DP83825I PHY but no connector, enable in carrierboard */ +&gmac { + snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 50000 50000>; + phy-supply = <&vcc_3v3>; + clock_in_out = "output"; +}; + +&gpu { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pmic_int>; + pinctrl-names = "default"; + #clock-cells = <0>; + clock-output-names = "xin32k"; + rockchip,system-power-controller; + wakeup-source; + status = "okay"; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc_3v3>; + vcc6-supply = <&vcc_3v3>; + vcc7-supply = <&vcc_3v3>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v0_1v8: vcc_emmc: DCDC_REG4 { + regulator-name = "vcc_3v0_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_3v3: DCDC_REG5 { + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v0: LDO_REG3 { + regulator-name = "vcc_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_lcd: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vcc_lcd"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_1v8_lcd: LDO_REG8 { + regulator-name = "vcc_1v8_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_1v8: LDO_REG9 { + regulator-name = "vcca_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + /* SE05x is limited to Fast Mode */ + clock-frequency = <400000>; + + fan: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #cooling-cells = <2>; + }; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2s0_8ch { + rockchip,trcm-sync-tx-only; + + pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_lrcktx + &i2s0_8ch_sdo0 &i2s0_8ch_sdi0>; +}; + +&io_domains { + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_3v3>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_emmc>; + vccio-oscgpi-supply = <&vcc_3v3>; + + status = "okay"; +}; + +&pinctrl { + emmc { + emmc_reset: emmc-reset { + rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + module_led_pin: module-led-pin { + rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + +}; + +&tsadc { + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +/* Mule UCAN */ +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&wdt { + status = "okay"; +};