| Message ID | 20220920073826.20811-5-johan+linaro@kernel.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | phy: qcom-qmp: config and misc clean ups | expand |
On 20/09/2022 09:38, Johan Hovold wrote: > The configuration PHY type is no longer needed since the QMP driver > split so drop it from the configuration and suspend callbacks. > > Signed-off-by: Johan Hovold <johan+linaro@kernel.org> > --- > drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 26 ------------------------- > 1 file changed, 26 deletions(-) > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c > index 93994f1a46e2..03481b6f1c35 100644 > --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c > @@ -1431,8 +1431,6 @@ struct qmp_phy; > > /* struct qmp_phy_cfg - per-PHY initialization config */ > struct qmp_phy_cfg { > - /* phy-type - PCIE/UFS/USB */ > - unsigned int type; > /* number of lanes provided by phy */ > int nlanes; > > @@ -1609,7 +1607,6 @@ static const char * const qmp_phy_vreg_l[] = { > }; > > static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = ipq8074_usb3_serdes_tbl, > @@ -1634,7 +1631,6 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { > }; > > static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = msm8996_usb3_serdes_tbl, > @@ -1659,7 +1655,6 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { > }; > > static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = qmp_v3_usb3_serdes_tbl, > @@ -1691,7 +1686,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { > }; > > static const struct qmp_phy_cfg sc7180_usb3phy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = qmp_v3_usb3_serdes_tbl, > @@ -1723,7 +1717,6 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = { > }; > > static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = sc8280xp_usb3_uniphy_serdes_tbl, > @@ -1752,7 +1745,6 @@ static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = { > }; > > static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl, > @@ -1781,7 +1773,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { > }; > > static const struct qmp_phy_cfg msm8998_usb3phy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = msm8998_usb3_serdes_tbl, > @@ -1808,7 +1799,6 @@ static const struct qmp_phy_cfg msm8998_usb3phy_cfg = { > }; > > static const struct qmp_phy_cfg sm8150_usb3phy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = sm8150_usb3_serdes_tbl, > @@ -1844,7 +1834,6 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = { > }; > > static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, > @@ -1876,7 +1865,6 @@ static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { > }; > > static const struct qmp_phy_cfg sm8250_usb3phy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = sm8150_usb3_serdes_tbl, > @@ -1911,7 +1899,6 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = { > }; > > static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, > @@ -1943,7 +1930,6 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { > }; > > static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, > @@ -1975,7 +1961,6 @@ static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = { > }; > > static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, > @@ -2007,7 +1992,6 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = { > }; > > static const struct qmp_phy_cfg sm8350_usb3phy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = sm8150_usb3_serdes_tbl, > @@ -2042,7 +2026,6 @@ static const struct qmp_phy_cfg sm8350_usb3phy_cfg = { > }; > > static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, > @@ -2074,7 +2057,6 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { > }; > > static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = { > - .type = PHY_TYPE_USB3, > .nlanes = 1, > > .serdes_tbl = qcm2290_usb3_serdes_tbl, > @@ -2432,10 +2414,6 @@ static int __maybe_unused qmp_usb_runtime_suspend(struct device *dev) > > dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode); > > - /* Supported only for USB3 PHY and luckily USB3 is the first phy */ > - if (cfg->type != PHY_TYPE_USB3) > - return 0; > - > if (!qphy->phy->init_count) { > dev_vdbg(dev, "PHY not initialized, bailing out\n"); > return 0; > @@ -2458,10 +2436,6 @@ static int __maybe_unused qmp_usb_runtime_resume(struct device *dev) > > dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode); > > - /* Supported only for USB3 PHY and luckily USB3 is the first phy */ > - if (cfg->type != PHY_TYPE_USB3) > - return 0; > - > if (!qphy->phy->init_count) { > dev_vdbg(dev, "PHY not initialized, bailing out\n"); > return 0; Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
On 20/09/2022 10:38, Johan Hovold wrote: > The configuration PHY type is no longer needed since the QMP driver > split so drop it from the configuration and suspend callbacks. > > Signed-off-by: Johan Hovold <johan+linaro@kernel.org> > --- > drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 26 ------------------------- > 1 file changed, 26 deletions(-) > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c index 93994f1a46e2..03481b6f1c35 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c @@ -1431,8 +1431,6 @@ struct qmp_phy; /* struct qmp_phy_cfg - per-PHY initialization config */ struct qmp_phy_cfg { - /* phy-type - PCIE/UFS/USB */ - unsigned int type; /* number of lanes provided by phy */ int nlanes; @@ -1609,7 +1607,6 @@ static const char * const qmp_phy_vreg_l[] = { }; static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = ipq8074_usb3_serdes_tbl, @@ -1634,7 +1631,6 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { }; static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = msm8996_usb3_serdes_tbl, @@ -1659,7 +1655,6 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { }; static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = qmp_v3_usb3_serdes_tbl, @@ -1691,7 +1686,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { }; static const struct qmp_phy_cfg sc7180_usb3phy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = qmp_v3_usb3_serdes_tbl, @@ -1723,7 +1717,6 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = { }; static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = sc8280xp_usb3_uniphy_serdes_tbl, @@ -1752,7 +1745,6 @@ static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl, @@ -1781,7 +1773,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg msm8998_usb3phy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = msm8998_usb3_serdes_tbl, @@ -1808,7 +1799,6 @@ static const struct qmp_phy_cfg msm8998_usb3phy_cfg = { }; static const struct qmp_phy_cfg sm8150_usb3phy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = sm8150_usb3_serdes_tbl, @@ -1844,7 +1834,6 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = { }; static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, @@ -1876,7 +1865,6 @@ static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sm8250_usb3phy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = sm8150_usb3_serdes_tbl, @@ -1911,7 +1899,6 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = { }; static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, @@ -1943,7 +1930,6 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, @@ -1975,7 +1961,6 @@ static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, @@ -2007,7 +1992,6 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sm8350_usb3phy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = sm8150_usb3_serdes_tbl, @@ -2042,7 +2026,6 @@ static const struct qmp_phy_cfg sm8350_usb3phy_cfg = { }; static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, @@ -2074,7 +2057,6 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = { - .type = PHY_TYPE_USB3, .nlanes = 1, .serdes_tbl = qcm2290_usb3_serdes_tbl, @@ -2432,10 +2414,6 @@ static int __maybe_unused qmp_usb_runtime_suspend(struct device *dev) dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode); - /* Supported only for USB3 PHY and luckily USB3 is the first phy */ - if (cfg->type != PHY_TYPE_USB3) - return 0; - if (!qphy->phy->init_count) { dev_vdbg(dev, "PHY not initialized, bailing out\n"); return 0; @@ -2458,10 +2436,6 @@ static int __maybe_unused qmp_usb_runtime_resume(struct device *dev) dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode); - /* Supported only for USB3 PHY and luckily USB3 is the first phy */ - if (cfg->type != PHY_TYPE_USB3) - return 0; - if (!qphy->phy->init_count) { dev_vdbg(dev, "PHY not initialized, bailing out\n"); return 0;
The configuration PHY type is no longer needed since the QMP driver split so drop it from the configuration and suspend callbacks. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 26 ------------------------- 1 file changed, 26 deletions(-)