Message ID | 20220920073826.20811-17-johan+linaro@kernel.org (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
Series | phy: qcom-qmp: config and misc clean ups | expand |
On 20/09/2022 09:38, Johan Hovold wrote: > For legacy reasons, there are two configuration parameters that appear > to describe the number of lanes a PHY has, even if "nlanes" was actually > used for a different purpose. > > Replace them both with a new field simply named "lanes". > > Signed-off-by: Johan Hovold <johan+linaro@kernel.org> > --- > drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 52 ++++++++++--------------- > 1 file changed, 20 insertions(+), 32 deletions(-) > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c > index a34320738f60..f01b3022a10d 100644 > --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c > @@ -1429,8 +1429,7 @@ static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_pcs_tbl[] = { > > /* struct qmp_phy_cfg - per-PHY initialization config */ > struct qmp_phy_cfg { > - /* number of lanes provided by phy */ > - int nlanes; > + int lanes; > > /* Init sequence for PHY blocks - serdes, tx, rx, pcs */ > const struct qmp_phy_init_tbl *serdes_tbl; > @@ -1470,8 +1469,6 @@ struct qmp_phy_cfg { > > /* true, if PHY has a separate DP_COM control block */ > bool has_phy_dp_com_ctrl; > - /* true, if PHY has secondary tx/rx lanes to be configured */ > - bool is_dual_lane_phy; > > /* Offset from PCS to PCS_USB region */ > unsigned int pcs_usb_offset; > @@ -1603,7 +1600,7 @@ static const char * const qmp_phy_vreg_l[] = { > }; > > static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { > - .nlanes = 1, > + .lanes = 1, > > .serdes_tbl = ipq8074_usb3_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(ipq8074_usb3_serdes_tbl), > @@ -1627,7 +1624,7 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { > }; > > static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { > - .nlanes = 1, > + .lanes = 1, > > .serdes_tbl = msm8996_usb3_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(msm8996_usb3_serdes_tbl), > @@ -1651,7 +1648,7 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { > }; > > static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { > - .nlanes = 1, > + .lanes = 2, > > .serdes_tbl = qmp_v3_usb3_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl), > @@ -1678,11 +1675,10 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { > .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, > > .has_phy_dp_com_ctrl = true, > - .is_dual_lane_phy = true, > }; > > static const struct qmp_phy_cfg sc7180_usb3phy_cfg = { > - .nlanes = 1, > + .lanes = 2, > > .serdes_tbl = qmp_v3_usb3_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl), > @@ -1709,11 +1705,10 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = { > .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, > > .has_phy_dp_com_ctrl = true, > - .is_dual_lane_phy = true, > }; > > static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = { > - .nlanes = 1, > + .lanes = 1, > > .serdes_tbl = sc8280xp_usb3_uniphy_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_serdes_tbl), > @@ -1741,7 +1736,7 @@ static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = { > }; > > static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { > - .nlanes = 1, > + .lanes = 1, > > .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_serdes_tbl), > @@ -1769,7 +1764,7 @@ static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { > }; > > static const struct qmp_phy_cfg msm8998_usb3phy_cfg = { > - .nlanes = 1, > + .lanes = 2, > > .serdes_tbl = msm8998_usb3_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl), > @@ -1790,12 +1785,10 @@ static const struct qmp_phy_cfg msm8998_usb3phy_cfg = { > .start_ctrl = SERDES_START | PCS_START, > .pwrdn_ctrl = SW_PWRDN, > .phy_status = PHYSTATUS, > - > - .is_dual_lane_phy = true, > }; > > static const struct qmp_phy_cfg sm8150_usb3phy_cfg = { > - .nlanes = 1, > + .lanes = 2, > > .serdes_tbl = sm8150_usb3_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl), > @@ -1826,11 +1819,10 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = { > .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, > > .has_phy_dp_com_ctrl = true, > - .is_dual_lane_phy = true, > }; > > static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { > - .nlanes = 1, > + .lanes = 1, > > .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl), > @@ -1861,7 +1853,7 @@ static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { > }; > > static const struct qmp_phy_cfg sm8250_usb3phy_cfg = { > - .nlanes = 1, > + .lanes = 2, > > .serdes_tbl = sm8150_usb3_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl), > @@ -1891,11 +1883,10 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = { > .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, > > .has_phy_dp_com_ctrl = true, > - .is_dual_lane_phy = true, > }; > > static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { > - .nlanes = 1, > + .lanes = 1, > > .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl), > @@ -1926,7 +1917,7 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { > }; > > static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = { > - .nlanes = 1, > + .lanes = 1, > > .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl), > @@ -1957,7 +1948,7 @@ static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = { > }; > > static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = { > - .nlanes = 1, > + .lanes = 1, > > .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl), > @@ -1988,7 +1979,7 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = { > }; > > static const struct qmp_phy_cfg sm8350_usb3phy_cfg = { > - .nlanes = 1, > + .lanes = 2, > > .serdes_tbl = sm8150_usb3_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl), > @@ -2018,11 +2009,10 @@ static const struct qmp_phy_cfg sm8350_usb3phy_cfg = { > .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, > > .has_phy_dp_com_ctrl = true, > - .is_dual_lane_phy = true, > }; > > static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { > - .nlanes = 1, > + .lanes = 1, > > .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl), > @@ -2053,7 +2043,7 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { > }; > > static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = { > - .nlanes = 1, > + .lanes = 2, > > .serdes_tbl = qcm2290_usb3_serdes_tbl, > .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl), > @@ -2074,8 +2064,6 @@ static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = { > .start_ctrl = SERDES_START | PCS_START, > .pwrdn_ctrl = SW_PWRDN, > .phy_status = PHYSTATUS, > - > - .is_dual_lane_phy = true, > }; > > static void qmp_usb_configure_lane(void __iomem *base, > @@ -2232,14 +2220,14 @@ static int qmp_usb_power_on(struct phy *phy) > /* Tx, Rx, and PCS configurations */ > qmp_usb_configure_lane(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num, 1); > > - if (cfg->is_dual_lane_phy) { > + if (cfg->lanes >= 2) { > qmp_usb_configure_lane(qphy->tx2, cfg->regs, > cfg->tx_tbl, cfg->tx_tbl_num, 2); > } > > qmp_usb_configure_lane(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 1); > > - if (cfg->is_dual_lane_phy) { > + if (cfg->lanes >= 2) { > qmp_usb_configure_lane(qphy->rx2, cfg->regs, > cfg->rx_tbl, cfg->rx_tbl_num, 2); > } > @@ -2613,7 +2601,7 @@ int qmp_usb_create(struct device *dev, struct device_node *np, int id, > if (cfg->pcs_usb_offset) > qphy->pcs_usb = qphy->pcs + cfg->pcs_usb_offset; > > - if (cfg->is_dual_lane_phy) { > + if (cfg->lanes >= 2) { > qphy->tx2 = devm_of_iomap(dev, np, 3, NULL); > if (IS_ERR(qphy->tx2)) > return PTR_ERR(qphy->tx2); Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
On 20/09/2022 10:38, Johan Hovold wrote: > For legacy reasons, there are two configuration parameters that appear > to describe the number of lanes a PHY has, even if "nlanes" was actually > used for a different purpose. > > Replace them both with a new field simply named "lanes". > > Signed-off-by: Johan Hovold <johan+linaro@kernel.org> > --- > drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 52 ++++++++++--------------- > 1 file changed, 20 insertions(+), 32 deletions(-) > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c index a34320738f60..f01b3022a10d 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c @@ -1429,8 +1429,7 @@ static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_pcs_tbl[] = { /* struct qmp_phy_cfg - per-PHY initialization config */ struct qmp_phy_cfg { - /* number of lanes provided by phy */ - int nlanes; + int lanes; /* Init sequence for PHY blocks - serdes, tx, rx, pcs */ const struct qmp_phy_init_tbl *serdes_tbl; @@ -1470,8 +1469,6 @@ struct qmp_phy_cfg { /* true, if PHY has a separate DP_COM control block */ bool has_phy_dp_com_ctrl; - /* true, if PHY has secondary tx/rx lanes to be configured */ - bool is_dual_lane_phy; /* Offset from PCS to PCS_USB region */ unsigned int pcs_usb_offset; @@ -1603,7 +1600,7 @@ static const char * const qmp_phy_vreg_l[] = { }; static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { - .nlanes = 1, + .lanes = 1, .serdes_tbl = ipq8074_usb3_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(ipq8074_usb3_serdes_tbl), @@ -1627,7 +1624,7 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { }; static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { - .nlanes = 1, + .lanes = 1, .serdes_tbl = msm8996_usb3_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(msm8996_usb3_serdes_tbl), @@ -1651,7 +1648,7 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { }; static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { - .nlanes = 1, + .lanes = 2, .serdes_tbl = qmp_v3_usb3_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl), @@ -1678,11 +1675,10 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, .has_phy_dp_com_ctrl = true, - .is_dual_lane_phy = true, }; static const struct qmp_phy_cfg sc7180_usb3phy_cfg = { - .nlanes = 1, + .lanes = 2, .serdes_tbl = qmp_v3_usb3_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl), @@ -1709,11 +1705,10 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = { .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, .has_phy_dp_com_ctrl = true, - .is_dual_lane_phy = true, }; static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = { - .nlanes = 1, + .lanes = 1, .serdes_tbl = sc8280xp_usb3_uniphy_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_serdes_tbl), @@ -1741,7 +1736,7 @@ static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { - .nlanes = 1, + .lanes = 1, .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_serdes_tbl), @@ -1769,7 +1764,7 @@ static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg msm8998_usb3phy_cfg = { - .nlanes = 1, + .lanes = 2, .serdes_tbl = msm8998_usb3_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl), @@ -1790,12 +1785,10 @@ static const struct qmp_phy_cfg msm8998_usb3phy_cfg = { .start_ctrl = SERDES_START | PCS_START, .pwrdn_ctrl = SW_PWRDN, .phy_status = PHYSTATUS, - - .is_dual_lane_phy = true, }; static const struct qmp_phy_cfg sm8150_usb3phy_cfg = { - .nlanes = 1, + .lanes = 2, .serdes_tbl = sm8150_usb3_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl), @@ -1826,11 +1819,10 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = { .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, .has_phy_dp_com_ctrl = true, - .is_dual_lane_phy = true, }; static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { - .nlanes = 1, + .lanes = 1, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl), @@ -1861,7 +1853,7 @@ static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sm8250_usb3phy_cfg = { - .nlanes = 1, + .lanes = 2, .serdes_tbl = sm8150_usb3_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl), @@ -1891,11 +1883,10 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = { .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, .has_phy_dp_com_ctrl = true, - .is_dual_lane_phy = true, }; static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { - .nlanes = 1, + .lanes = 1, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl), @@ -1926,7 +1917,7 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = { - .nlanes = 1, + .lanes = 1, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl), @@ -1957,7 +1948,7 @@ static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = { - .nlanes = 1, + .lanes = 1, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl), @@ -1988,7 +1979,7 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sm8350_usb3phy_cfg = { - .nlanes = 1, + .lanes = 2, .serdes_tbl = sm8150_usb3_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl), @@ -2018,11 +2009,10 @@ static const struct qmp_phy_cfg sm8350_usb3phy_cfg = { .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, .has_phy_dp_com_ctrl = true, - .is_dual_lane_phy = true, }; static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { - .nlanes = 1, + .lanes = 1, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl), @@ -2053,7 +2043,7 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = { - .nlanes = 1, + .lanes = 2, .serdes_tbl = qcm2290_usb3_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl), @@ -2074,8 +2064,6 @@ static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = { .start_ctrl = SERDES_START | PCS_START, .pwrdn_ctrl = SW_PWRDN, .phy_status = PHYSTATUS, - - .is_dual_lane_phy = true, }; static void qmp_usb_configure_lane(void __iomem *base, @@ -2232,14 +2220,14 @@ static int qmp_usb_power_on(struct phy *phy) /* Tx, Rx, and PCS configurations */ qmp_usb_configure_lane(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num, 1); - if (cfg->is_dual_lane_phy) { + if (cfg->lanes >= 2) { qmp_usb_configure_lane(qphy->tx2, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num, 2); } qmp_usb_configure_lane(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 1); - if (cfg->is_dual_lane_phy) { + if (cfg->lanes >= 2) { qmp_usb_configure_lane(qphy->rx2, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 2); } @@ -2613,7 +2601,7 @@ int qmp_usb_create(struct device *dev, struct device_node *np, int id, if (cfg->pcs_usb_offset) qphy->pcs_usb = qphy->pcs + cfg->pcs_usb_offset; - if (cfg->is_dual_lane_phy) { + if (cfg->lanes >= 2) { qphy->tx2 = devm_of_iomap(dev, np, 3, NULL); if (IS_ERR(qphy->tx2)) return PTR_ERR(qphy->tx2);
For legacy reasons, there are two configuration parameters that appear to describe the number of lanes a PHY has, even if "nlanes" was actually used for a different purpose. Replace them both with a new field simply named "lanes". Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 52 ++++++++++--------------- 1 file changed, 20 insertions(+), 32 deletions(-)