diff mbox series

[5.10] interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate

Message ID 20220922141725.5.10.1.I791715539cae1355e21827ca738b0b523a4a0f53@changeid (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series [5.10] interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate | expand

Commit Message

Doug Anderson Sept. 22, 2022, 9:18 p.m. UTC
From: Mike Tipton <mdtipton@codeaurora.org>

commit b95b668eaaa2574e8ee72f143c52075e9955177e upstream.

We're only adding BCMs to the commit list in aggregate(), but there are
cases where pre_aggregate() is called without subsequently calling
aggregate(). In particular, in icc_sync_state() when a node with initial
BW has zero requests. Since BCMs aren't added to the commit list in
these cases, we don't actually send the zero BW request to HW. So the
resources remain on unnecessarily.

Add BCMs to the commit list in pre_aggregate() instead, which is always
called even when there are no requests.

Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
[georgi: remove icc_sync_state for platforms with incomplete support]
Link: https://lore.kernel.org/r/20211125174751.25317-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
[dianders: dropped sm8350.c which isn't present in 5.10]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
This should have been included in Alex Elder's request for patches
picked to 5.10 [1] but it was missed. Let's finally pick it up.

[1] https://lore.kernel.org/r/20220608205415.185248-3-elder@linaro.org

 drivers/interconnect/qcom/icc-rpmh.c | 10 +++++-----
 drivers/interconnect/qcom/sm8150.c   |  1 -
 drivers/interconnect/qcom/sm8250.c   |  1 -
 3 files changed, 5 insertions(+), 7 deletions(-)

Comments

Alex Elder Sept. 22, 2022, 9:28 p.m. UTC | #1
On 9/22/22 4:18 PM, Douglas Anderson wrote:
> From: Mike Tipton <mdtipton@codeaurora.org>
> 
> commit b95b668eaaa2574e8ee72f143c52075e9955177e upstream.
> 
> We're only adding BCMs to the commit list in aggregate(), but there are
> cases where pre_aggregate() is called without subsequently calling
> aggregate(). In particular, in icc_sync_state() when a node with initial
> BW has zero requests. Since BCMs aren't added to the commit list in
> these cases, we don't actually send the zero BW request to HW. So the
> resources remain on unnecessarily.
> 
> Add BCMs to the commit list in pre_aggregate() instead, which is always
> called even when there are no requests.
> 
> Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
> [georgi: remove icc_sync_state for platforms with incomplete support]
> Link: https://lore.kernel.org/r/20211125174751.25317-1-djakov@kernel.org
> Signed-off-by: Georgi Djakov <djakov@kernel.org>
> [dianders: dropped sm8350.c which isn't present in 5.10]
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Whoops, sorry about that.

Acked-by: Alex Elder <elder@linaro.org>

> ---
> This should have been included in Alex Elder's request for patches
> picked to 5.10 [1] but it was missed. Let's finally pick it up.
> 
> [1] https://lore.kernel.org/r/20220608205415.185248-3-elder@linaro.org
> 
>   drivers/interconnect/qcom/icc-rpmh.c | 10 +++++-----
>   drivers/interconnect/qcom/sm8150.c   |  1 -
>   drivers/interconnect/qcom/sm8250.c   |  1 -
>   3 files changed, 5 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c
> index f6fae64861ce..27cc5f03611c 100644
> --- a/drivers/interconnect/qcom/icc-rpmh.c
> +++ b/drivers/interconnect/qcom/icc-rpmh.c
> @@ -20,13 +20,18 @@ void qcom_icc_pre_aggregate(struct icc_node *node)
>   {
>   	size_t i;
>   	struct qcom_icc_node *qn;
> +	struct qcom_icc_provider *qp;
>   
>   	qn = node->data;
> +	qp = to_qcom_provider(node->provider);
>   
>   	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
>   		qn->sum_avg[i] = 0;
>   		qn->max_peak[i] = 0;
>   	}
> +
> +	for (i = 0; i < qn->num_bcms; i++)
> +		qcom_icc_bcm_voter_add(qp->voter, qn->bcms[i]);
>   }
>   EXPORT_SYMBOL_GPL(qcom_icc_pre_aggregate);
>   
> @@ -44,10 +49,8 @@ int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
>   {
>   	size_t i;
>   	struct qcom_icc_node *qn;
> -	struct qcom_icc_provider *qp;
>   
>   	qn = node->data;
> -	qp = to_qcom_provider(node->provider);
>   
>   	if (!tag)
>   		tag = QCOM_ICC_TAG_ALWAYS;
> @@ -67,9 +70,6 @@ int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
>   	*agg_avg += avg_bw;
>   	*agg_peak = max_t(u32, *agg_peak, peak_bw);
>   
> -	for (i = 0; i < qn->num_bcms; i++)
> -		qcom_icc_bcm_voter_add(qp->voter, qn->bcms[i]);
> -
>   	return 0;
>   }
>   EXPORT_SYMBOL_GPL(qcom_icc_aggregate);
> diff --git a/drivers/interconnect/qcom/sm8150.c b/drivers/interconnect/qcom/sm8150.c
> index c76b2c7f9b10..b936196c229c 100644
> --- a/drivers/interconnect/qcom/sm8150.c
> +++ b/drivers/interconnect/qcom/sm8150.c
> @@ -627,7 +627,6 @@ static struct platform_driver qnoc_driver = {
>   	.driver = {
>   		.name = "qnoc-sm8150",
>   		.of_match_table = qnoc_of_match,
> -		.sync_state = icc_sync_state,
>   	},
>   };
>   module_platform_driver(qnoc_driver);
> diff --git a/drivers/interconnect/qcom/sm8250.c b/drivers/interconnect/qcom/sm8250.c
> index cc558fec74e3..40820043c8d3 100644
> --- a/drivers/interconnect/qcom/sm8250.c
> +++ b/drivers/interconnect/qcom/sm8250.c
> @@ -643,7 +643,6 @@ static struct platform_driver qnoc_driver = {
>   	.driver = {
>   		.name = "qnoc-sm8250",
>   		.of_match_table = qnoc_of_match,
> -		.sync_state = icc_sync_state,
>   	},
>   };
>   module_platform_driver(qnoc_driver);
Greg Kroah-Hartman Sept. 24, 2022, 9:34 a.m. UTC | #2
On Thu, Sep 22, 2022 at 04:28:25PM -0500, Alex Elder wrote:
> On 9/22/22 4:18 PM, Douglas Anderson wrote:
> > From: Mike Tipton <mdtipton@codeaurora.org>
> > 
> > commit b95b668eaaa2574e8ee72f143c52075e9955177e upstream.
> > 
> > We're only adding BCMs to the commit list in aggregate(), but there are
> > cases where pre_aggregate() is called without subsequently calling
> > aggregate(). In particular, in icc_sync_state() when a node with initial
> > BW has zero requests. Since BCMs aren't added to the commit list in
> > these cases, we don't actually send the zero BW request to HW. So the
> > resources remain on unnecessarily.
> > 
> > Add BCMs to the commit list in pre_aggregate() instead, which is always
> > called even when there are no requests.
> > 
> > Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
> > [georgi: remove icc_sync_state for platforms with incomplete support]
> > Link: https://lore.kernel.org/r/20211125174751.25317-1-djakov@kernel.org
> > Signed-off-by: Georgi Djakov <djakov@kernel.org>
> > [dianders: dropped sm8350.c which isn't present in 5.10]
> > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> 
> Whoops, sorry about that.
> 
> Acked-by: Alex Elder <elder@linaro.org>

Now queued up, thanks.

greg k-h
diff mbox series

Patch

diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c
index f6fae64861ce..27cc5f03611c 100644
--- a/drivers/interconnect/qcom/icc-rpmh.c
+++ b/drivers/interconnect/qcom/icc-rpmh.c
@@ -20,13 +20,18 @@  void qcom_icc_pre_aggregate(struct icc_node *node)
 {
 	size_t i;
 	struct qcom_icc_node *qn;
+	struct qcom_icc_provider *qp;
 
 	qn = node->data;
+	qp = to_qcom_provider(node->provider);
 
 	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
 		qn->sum_avg[i] = 0;
 		qn->max_peak[i] = 0;
 	}
+
+	for (i = 0; i < qn->num_bcms; i++)
+		qcom_icc_bcm_voter_add(qp->voter, qn->bcms[i]);
 }
 EXPORT_SYMBOL_GPL(qcom_icc_pre_aggregate);
 
@@ -44,10 +49,8 @@  int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
 {
 	size_t i;
 	struct qcom_icc_node *qn;
-	struct qcom_icc_provider *qp;
 
 	qn = node->data;
-	qp = to_qcom_provider(node->provider);
 
 	if (!tag)
 		tag = QCOM_ICC_TAG_ALWAYS;
@@ -67,9 +70,6 @@  int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
 	*agg_avg += avg_bw;
 	*agg_peak = max_t(u32, *agg_peak, peak_bw);
 
-	for (i = 0; i < qn->num_bcms; i++)
-		qcom_icc_bcm_voter_add(qp->voter, qn->bcms[i]);
-
 	return 0;
 }
 EXPORT_SYMBOL_GPL(qcom_icc_aggregate);
diff --git a/drivers/interconnect/qcom/sm8150.c b/drivers/interconnect/qcom/sm8150.c
index c76b2c7f9b10..b936196c229c 100644
--- a/drivers/interconnect/qcom/sm8150.c
+++ b/drivers/interconnect/qcom/sm8150.c
@@ -627,7 +627,6 @@  static struct platform_driver qnoc_driver = {
 	.driver = {
 		.name = "qnoc-sm8150",
 		.of_match_table = qnoc_of_match,
-		.sync_state = icc_sync_state,
 	},
 };
 module_platform_driver(qnoc_driver);
diff --git a/drivers/interconnect/qcom/sm8250.c b/drivers/interconnect/qcom/sm8250.c
index cc558fec74e3..40820043c8d3 100644
--- a/drivers/interconnect/qcom/sm8250.c
+++ b/drivers/interconnect/qcom/sm8250.c
@@ -643,7 +643,6 @@  static struct platform_driver qnoc_driver = {
 	.driver = {
 		.name = "qnoc-sm8250",
 		.of_match_table = qnoc_of_match,
-		.sync_state = icc_sync_state,
 	},
 };
 module_platform_driver(qnoc_driver);