| Message ID | 20220919-v1-4-4844816c9808@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add MT8195 HDMI support | expand |
On 19/09/2022 18:56, Guillaume Ranquet wrote: > Add mt8195 SoC bindings for hdmi and hdmi-ddc > > Make port1 optional for mt8195 as it only supports HDMI tx for now. > Requires a ddc-i2c-bus phandle. > Requires a power-domains phandle. > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml > index bdaf0b51e68c..abb231a0694b 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml > @@ -21,6 +21,10 @@ properties: > - mediatek,mt7623-hdmi > - mediatek,mt8167-hdmi > - mediatek,mt8173-hdmi > + - mediatek,mt8195-hdmi > + > + clocks: true > + clock-names: true ???? Why is this moved? > > reg: > maxItems: 1 > @@ -28,20 +32,6 @@ properties: > interrupts: > maxItems: 1 > > - clocks: > - items: > - - description: Pixel Clock > - - description: HDMI PLL > - - description: Bit Clock > - - description: S/PDIF Clock > - > - clock-names: > - items: > - - const: pixel > - - const: pll > - - const: bclk > - - const: spdif Clock definition with constraints should stay here. You just customize it per variant. > - > phys: > maxItems: 1 > > @@ -58,6 +48,16 @@ properties: > description: | > phandle link and register offset to the system configuration registers. > > + ddc-i2c-bus: > + $ref: '/schemas/types.yaml#/definitions/phandle' Drop quotes > + description: Phandle to the ddc-i2c device Isn't this property of panel? > + > + power-domains: > + description: > + A phandle and PM domain specifier as defined by bindings > + of the power controller specified by phandle. See > + Documentation/devicetree/bindings/power/power-domain.yaml for details. No need for this text. This is standard property. You miss maxItems. > + > ports: > $ref: /schemas/graph.yaml#/properties/ports > > @@ -76,7 +76,6 @@ properties: > > required: > - port@0 > - - port@1 > > required: > - compatible > @@ -86,9 +85,55 @@ required: > - clock-names > - phys > - phy-names > - - mediatek,syscon-hdmi > - ports > > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: mediatek,mt8195-hdmi > + then: > + properties: > + clocks: > + items: > + - description: APB > + - description: HDCP > + - description: HDCP 24M > + - description: Split HDMI > + clock-names: > + items: > + - const: hdmi_apb_sel > + - const: hdcp_sel > + - const: hdcp24_sel > + - const: split_hdmi Clocks are entirely different. I am not sure there is benefit in keeping these devices in one bindings. > + > + required: > + - power-domains > + - ddc-i2c-bus Blank line, > + else: > + properties: > + clocks: > + items: > + - description: Pixel Clock > + - description: HDMI PLL > + - description: Bit Clock > + - description: S/PDIF Clock > + > + clock-names: > + items: > + - const: pixel > + - const: pll > + - const: bclk > + - const: spdif > + > + ports: > + required: > + - port@1 > + > + required: > + - mediatek,syscon-hdmi > + > additionalProperties: false > > examples: > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml > new file mode 100644 > index 000000000000..3c80bcebe6d3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml > @@ -0,0 +1,45 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Mediatek HDMI DDC Device Tree Bindings for mt8195 Drop Device Tree Bindings > + > +maintainers: > + - CK Hu <ck.hu@mediatek.com> > + - Jitao shi <jitao.shi@mediatek.com> > + > +description: | > + The HDMI DDC i2c controller is used to interface with the HDMI DDC pins. Why is this different than existing ddc bindings? > + > +properties: > + compatible: > + enum: > + - mediatek,mt8195-hdmi-ddc > + > + clocks: > + maxItems: 1 > + > + clock-names: > + items: > + - const: ddc-i2c > + > +required: > + - compatible > + - clocks > + - clock-names > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + hdmiddc0: ddc_i2c { No underscores in node names. Generic node names. Best regards, Krzysztof
On Thu, 22 Sep 2022 09:18, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: >On 19/09/2022 18:56, Guillaume Ranquet wrote: >> Add mt8195 SoC bindings for hdmi and hdmi-ddc >> >> Make port1 optional for mt8195 as it only supports HDMI tx for now. >> Requires a ddc-i2c-bus phandle. >> Requires a power-domains phandle. >> >> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> >> >> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml >> index bdaf0b51e68c..abb231a0694b 100644 >> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml >> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml >> @@ -21,6 +21,10 @@ properties: >> - mediatek,mt7623-hdmi >> - mediatek,mt8167-hdmi >> - mediatek,mt8173-hdmi >> + - mediatek,mt8195-hdmi >> + >> + clocks: true >> + clock-names: true > >???? >Why is this moved? > >> >> reg: >> maxItems: 1 >> @@ -28,20 +32,6 @@ properties: >> interrupts: >> maxItems: 1 >> >> - clocks: >> - items: >> - - description: Pixel Clock >> - - description: HDMI PLL >> - - description: Bit Clock >> - - description: S/PDIF Clock >> - >> - clock-names: >> - items: >> - - const: pixel >> - - const: pll >> - - const: bclk >> - - const: spdif > >Clock definition with constraints should stay here. You just customize >it per variant. > Clocks are different between the two hardwares, so I've tried moving everything inside the if/else block. Is there a better way to express this? >> - >> phys: >> maxItems: 1 >> >> @@ -58,6 +48,16 @@ properties: >> description: | >> phandle link and register offset to the system configuration registers. >> >> + ddc-i2c-bus: >> + $ref: '/schemas/types.yaml#/definitions/phandle' > >Drop quotes > >> + description: Phandle to the ddc-i2c device > >Isn't this property of panel? > It's a property used in panels and connectors. But since this IP doesn't use a connector per say, I've added the property here. Which doesn't sound reasonnable when I'm explaining it like this... I'll see what I can do to fit a connector and have things look a bit more standard. >> + >> + power-domains: >> + description: >> + A phandle and PM domain specifier as defined by bindings >> + of the power controller specified by phandle. See >> + Documentation/devicetree/bindings/power/power-domain.yaml for details. > >No need for this text. This is standard property. You miss maxItems. > > >> + >> ports: >> $ref: /schemas/graph.yaml#/properties/ports >> >> @@ -76,7 +76,6 @@ properties: >> >> required: >> - port@0 >> - - port@1 >> >> required: >> - compatible >> @@ -86,9 +85,55 @@ required: >> - clock-names >> - phys >> - phy-names >> - - mediatek,syscon-hdmi >> - ports >> >> +allOf: >> + - if: >> + properties: >> + compatible: >> + contains: >> + const: mediatek,mt8195-hdmi >> + then: >> + properties: >> + clocks: >> + items: >> + - description: APB >> + - description: HDCP >> + - description: HDCP 24M >> + - description: Split HDMI >> + clock-names: >> + items: >> + - const: hdmi_apb_sel >> + - const: hdcp_sel >> + - const: hdcp24_sel >> + - const: split_hdmi > >Clocks are entirely different. I am not sure there is benefit in keeping >these devices in one bindings. > I agree with that, but it was requested by CK that the driver and bindings be as common as possible. >> + >> + required: >> + - power-domains >> + - ddc-i2c-bus > >Blank line, > >> + else: >> + properties: >> + clocks: >> + items: >> + - description: Pixel Clock >> + - description: HDMI PLL >> + - description: Bit Clock >> + - description: S/PDIF Clock >> + >> + clock-names: >> + items: >> + - const: pixel >> + - const: pll >> + - const: bclk >> + - const: spdif >> + >> + ports: >> + required: >> + - port@1 >> + >> + required: >> + - mediatek,syscon-hdmi >> + >> additionalProperties: false >> >> examples: >> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml >> new file mode 100644 >> index 000000000000..3c80bcebe6d3 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml >> @@ -0,0 +1,45 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Mediatek HDMI DDC Device Tree Bindings for mt8195 > >Drop Device Tree Bindings > >> + >> +maintainers: >> + - CK Hu <ck.hu@mediatek.com> >> + - Jitao shi <jitao.shi@mediatek.com> >> + >> +description: | >> + The HDMI DDC i2c controller is used to interface with the HDMI DDC pins. > >Why is this different than existing ddc bindings? > This ddc is actually part of the MT8195 hdmi IP. So it is a bit simpler than the mediatek,hdmi-ddc.yaml As it has only one clock, no reg, no interrupts. >> + >> +properties: >> + compatible: >> + enum: >> + - mediatek,mt8195-hdmi-ddc >> + >> + clocks: >> + maxItems: 1 >> + >> + clock-names: >> + items: >> + - const: ddc-i2c >> + >> +required: >> + - compatible >> + - clocks >> + - clock-names >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/interrupt-controller/arm-gic.h> >> + #include <dt-bindings/interrupt-controller/irq.h> >> + hdmiddc0: ddc_i2c { > >No underscores in node names. Generic node names. > > >Best regards, >Krzysztof >
On 27/09/2022 15:54, Guillaume Ranquet wrote: > On Thu, 22 Sep 2022 09:18, Krzysztof Kozlowski > <krzysztof.kozlowski@linaro.org> wrote: >> On 19/09/2022 18:56, Guillaume Ranquet wrote: >>> Add mt8195 SoC bindings for hdmi and hdmi-ddc >>> >>> Make port1 optional for mt8195 as it only supports HDMI tx for now. >>> Requires a ddc-i2c-bus phandle. >>> Requires a power-domains phandle. >>> >>> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> >>> >>> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml >>> index bdaf0b51e68c..abb231a0694b 100644 >>> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml >>> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml >>> @@ -21,6 +21,10 @@ properties: >>> - mediatek,mt7623-hdmi >>> - mediatek,mt8167-hdmi >>> - mediatek,mt8173-hdmi >>> + - mediatek,mt8195-hdmi >>> + >>> + clocks: true >>> + clock-names: true >> >> ???? >> Why is this moved? >> >>> >>> reg: >>> maxItems: 1 >>> @@ -28,20 +32,6 @@ properties: >>> interrupts: >>> maxItems: 1 >>> >>> - clocks: >>> - items: >>> - - description: Pixel Clock >>> - - description: HDMI PLL >>> - - description: Bit Clock >>> - - description: S/PDIF Clock >>> - >>> - clock-names: >>> - items: >>> - - const: pixel >>> - - const: pll >>> - - const: bclk >>> - - const: spdif >> >> Clock definition with constraints should stay here. You just customize >> it per variant. >> > Clocks are different between the two hardwares, so I've tried moving everything > inside the if/else block. > > Is there a better way to express this? https://elixir.bootlin.com/linux/v5.19-rc6/source/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml#L38 Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml index bdaf0b51e68c..abb231a0694b 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml @@ -21,6 +21,10 @@ properties: - mediatek,mt7623-hdmi - mediatek,mt8167-hdmi - mediatek,mt8173-hdmi + - mediatek,mt8195-hdmi + + clocks: true + clock-names: true reg: maxItems: 1 @@ -28,20 +32,6 @@ properties: interrupts: maxItems: 1 - clocks: - items: - - description: Pixel Clock - - description: HDMI PLL - - description: Bit Clock - - description: S/PDIF Clock - - clock-names: - items: - - const: pixel - - const: pll - - const: bclk - - const: spdif - phys: maxItems: 1 @@ -58,6 +48,16 @@ properties: description: | phandle link and register offset to the system configuration registers. + ddc-i2c-bus: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: Phandle to the ddc-i2c device + + power-domains: + description: + A phandle and PM domain specifier as defined by bindings + of the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + ports: $ref: /schemas/graph.yaml#/properties/ports @@ -76,7 +76,6 @@ properties: required: - port@0 - - port@1 required: - compatible @@ -86,9 +85,55 @@ required: - clock-names - phys - phy-names - - mediatek,syscon-hdmi - ports +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt8195-hdmi + then: + properties: + clocks: + items: + - description: APB + - description: HDCP + - description: HDCP 24M + - description: Split HDMI + clock-names: + items: + - const: hdmi_apb_sel + - const: hdcp_sel + - const: hdcp24_sel + - const: split_hdmi + + required: + - power-domains + - ddc-i2c-bus + else: + properties: + clocks: + items: + - description: Pixel Clock + - description: HDMI PLL + - description: Bit Clock + - description: S/PDIF Clock + + clock-names: + items: + - const: pixel + - const: pll + - const: bclk + - const: spdif + + ports: + required: + - port@1 + + required: + - mediatek,syscon-hdmi + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml new file mode 100644 index 000000000000..3c80bcebe6d3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI DDC Device Tree Bindings for mt8195 + +maintainers: + - CK Hu <ck.hu@mediatek.com> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + The HDMI DDC i2c controller is used to interface with the HDMI DDC pins. + +properties: + compatible: + enum: + - mediatek,mt8195-hdmi-ddc + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ddc-i2c + +required: + - compatible + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + hdmiddc0: ddc_i2c { + compatible = "mediatek,mt8195-hdmi-ddc"; + clocks = <&clk26m>; + clock-names = "ddc-i2c"; + }; + +...
Add mt8195 SoC bindings for hdmi and hdmi-ddc Make port1 optional for mt8195 as it only supports HDMI tx for now. Requires a ddc-i2c-bus phandle. Requires a power-domains phandle. Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>