@@ -40,6 +40,7 @@
#define VIRTIO_BLK_F_MQ 12 /* support more than one vq */
#define VIRTIO_BLK_F_DISCARD 13 /* DISCARD is supported */
#define VIRTIO_BLK_F_WRITE_ZEROES 14 /* WRITE ZEROES is supported */
+#define VIRTIO_BLK_F_ZONED 17 /* Zoned block device */
/* Legacy feature bits */
#ifndef VIRTIO_BLK_NO_LEGACY
@@ -119,6 +120,20 @@ struct virtio_blk_config {
uint8_t write_zeroes_may_unmap;
uint8_t unused1[3];
+
+ /* Secure erase fields that are defined in the virtio spec */
+ uint8_t sec_erase[12];
+
+ /* Zoned block device characteristics (if VIRTIO_BLK_F_ZONED) */
+ struct virtio_blk_zoned_characteristics {
+ __virtio32 zone_sectors;
+ __virtio32 max_open_zones;
+ __virtio32 max_active_zones;
+ __virtio32 max_append_sectors;
+ __virtio32 write_granularity;
+ uint8_t model;
+ uint8_t unused2[3];
+ } zoned;
} QEMU_PACKED;
/*
@@ -153,6 +168,27 @@ struct virtio_blk_config {
/* Write zeroes command */
#define VIRTIO_BLK_T_WRITE_ZEROES 13
+/* Zone append command */
+#define VIRTIO_BLK_T_ZONE_APPEND 15
+
+/* Report zones command */
+#define VIRTIO_BLK_T_ZONE_REPORT 16
+
+/* Open zone command */
+#define VIRTIO_BLK_T_ZONE_OPEN 18
+
+/* Close zone command */
+#define VIRTIO_BLK_T_ZONE_CLOSE 20
+
+/* Finish zone command */
+#define VIRTIO_BLK_T_ZONE_FINISH 22
+
+/* Reset zone command */
+#define VIRTIO_BLK_T_ZONE_RESET 24
+
+/* Reset All zones command */
+#define VIRTIO_BLK_T_ZONE_RESET_ALL 26
+
#ifndef VIRTIO_BLK_NO_LEGACY
/* Barrier before this op. */
#define VIRTIO_BLK_T_BARRIER 0x80000000
@@ -172,6 +208,72 @@ struct virtio_blk_outhdr {
__virtio64 sector;
};
+/*
+ * Supported zoned device models.
+ */
+
+/* Regular block device */
+#define VIRTIO_BLK_Z_NONE 0
+/* Host-managed zoned device */
+#define VIRTIO_BLK_Z_HM 1
+/* Host-aware zoned device */
+#define VIRTIO_BLK_Z_HA 2
+
+/*
+ * Zone descriptor. A part of VIRTIO_BLK_T_ZONE_REPORT command reply.
+ */
+struct virtio_blk_zone_descriptor {
+ /* Zone capacity */
+ __virtio64 z_cap;
+ /* The starting sector of the zone */
+ __virtio64 z_start;
+ /* Zone write pointer position in sectors */
+ __virtio64 z_wp;
+ /* Zone type */
+ uint8_t z_type;
+ /* Zone state */
+ uint8_t z_state;
+ uint8_t reserved[38];
+};
+
+struct virtio_blk_zone_report {
+ __virtio64 nr_zones;
+ uint8_t reserved[56];
+ struct virtio_blk_zone_descriptor zones[];
+};
+
+/*
+ * Supported zone types.
+ */
+
+/* Conventional zone */
+#define VIRTIO_BLK_ZT_CONV 1
+/* Sequential Write Required zone */
+#define VIRTIO_BLK_ZT_SWR 2
+/* Sequential Write Preferred zone */
+#define VIRTIO_BLK_ZT_SWP 3
+
+/*
+ * Zone states that are available for zones of all types.
+ */
+
+/* Not a write pointer (conventional zones only) */
+#define VIRTIO_BLK_ZS_NOT_WP 0
+/* Empty */
+#define VIRTIO_BLK_ZS_EMPTY 1
+/* Implicitly Open */
+#define VIRTIO_BLK_ZS_IOPEN 2
+/* Explicitly Open */
+#define VIRTIO_BLK_ZS_EOPEN 3
+/* Closed */
+#define VIRTIO_BLK_ZS_CLOSED 4
+/* Read-Only */
+#define VIRTIO_BLK_ZS_RDONLY 13
+/* Full */
+#define VIRTIO_BLK_ZS_FULL 14
+/* Offline */
+#define VIRTIO_BLK_ZS_OFFLINE 15
+
/* Unmap this range (only valid for write zeroes command) */
#define VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP 0x00000001
@@ -198,4 +300,11 @@ struct virtio_scsi_inhdr {
#define VIRTIO_BLK_S_OK 0
#define VIRTIO_BLK_S_IOERR 1
#define VIRTIO_BLK_S_UNSUPP 2
+
+/* Error codes that are specific to zoned block devices */
+#define VIRTIO_BLK_S_ZONE_INVALID_CMD 3
+#define VIRTIO_BLK_S_ZONE_UNALIGNED_WP 4
+#define VIRTIO_BLK_S_ZONE_OPEN_RESOURCE 5
+#define VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE 6
+
#endif /* _LINUX_VIRTIO_BLK_H */
Use scripts/update-linux-headers.sh to update virtio-blk headers from Dmitry's "virtio-blk:add support for zoned block devices" linux patch. There is a link for more information: https://github.com/dmitry-fomichev/virtblk-zbd Signed-off-by: Sam Li <faithilikerun@gmail.com> --- include/standard-headers/linux/virtio_blk.h | 109 ++++++++++++++++++++ 1 file changed, 109 insertions(+)