Message ID | 20221006185333.v7.4.I50d04dcbe735dda69995cf1078824d671501869e@changeid (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Add LTE SKU for sc7280-evoker family | expand |
Hi, On Thu, Oct 6, 2022 at 3:58 AM Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> wrote: > > Change touchpad and touchscreen node for evoker > Touchpad: SA461D-1011 > Touchscreen: GT7986U > > Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> > --- > > Changes in v7: > - add compiatable for gt7986 > > Changes in v6: > - add removed pinctrl and align touchscreen label with herobrine board > > Changes in v5: > - new patch for Touchscreen/trackpad in v5 > > .../boot/dts/qcom/sc7280-herobrine-evoker.dtsi | 15 +++++++-------- > 1 file changed, 7 insertions(+), 8 deletions(-) Reviewed-by: Douglas Anderson <dianders@chromium.org>
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi index e78072159d54b..d713750f81019 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi @@ -23,16 +23,15 @@ ap_tp_i2c: &i2c0 { status = "okay"; clock-frequency = <400000>; - trackpad: trackpad@2c { - compatible = "hid-over-i2c"; - reg = <0x2c>; + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; pinctrl-names = "default"; pinctrl-0 = <&tp_int_odl>; interrupt-parent = <&tlmm>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - hid-descr-addr = <0x20>; vcc-supply = <&pp3300_z1>; wakeup-source; @@ -43,9 +42,9 @@ ts_i2c: &i2c13 { status = "okay"; clock-frequency = <400000>; - ap_ts: touchscreen@10 { - compatible = "elan,ekth6915"; - reg = <0x10>; + ap_ts: touchscreen@5d { + compatible = "goodix,gt7986u", "goodix,gt7375p"; + reg = <0x5d>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; @@ -54,7 +53,7 @@ ap_ts: touchscreen@10 { reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; - vcc33-supply = <&ts_avdd>; + vdd-supply = <&ts_avdd>; }; };
Change touchpad and touchscreen node for evoker Touchpad: SA461D-1011 Touchscreen: GT7986U Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> --- Changes in v7: - add compiatable for gt7986 Changes in v6: - add removed pinctrl and align touchscreen label with herobrine board Changes in v5: - new patch for Touchscreen/trackpad in v5 .../boot/dts/qcom/sc7280-herobrine-evoker.dtsi | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-)