| Message ID | 20221004134909.1692021-9-nuno.sa@analog.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Make 'mlock' really private | expand |
On Tue, 4 Oct 2022 15:49:01 +0200 Nuno Sá <nuno.sa@analog.com> wrote: > The iio_device lock is only meant for internal use. Hence define a > device local lock to protect against concurrent accesses. > > While at it, properly include "mutex.h" for mutex related APIs. > > Signed-off-by: Nuno Sá <nuno.sa@analog.com> Applied. Pushed out as testing for now, will rebase after rc1. Thanks, J > --- > drivers/iio/adc/sc27xx_adc.c | 14 ++++++++++---- > 1 file changed, 10 insertions(+), 4 deletions(-) > > diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c > index f8421cbba8fa..ff1fc329bb9b 100644 > --- a/drivers/iio/adc/sc27xx_adc.c > +++ b/drivers/iio/adc/sc27xx_adc.c > @@ -4,6 +4,7 @@ > #include <linux/hwspinlock.h> > #include <linux/iio/iio.h> > #include <linux/module.h> > +#include <linux/mutex.h> > #include <linux/nvmem-consumer.h> > #include <linux/of.h> > #include <linux/of_device.h> > @@ -83,6 +84,8 @@ struct sc27xx_adc_data { > struct device *dev; > struct regulator *volref; > struct regmap *regmap; > + /* lock to protect against multiple access to the device */ > + struct mutex lock; > /* > * One hardware spinlock to synchronize between the multiple > * subsystems which will access the unique ADC controller. > @@ -664,9 +667,9 @@ static int sc27xx_adc_read_raw(struct iio_dev *indio_dev, > > switch (mask) { > case IIO_CHAN_INFO_RAW: > - mutex_lock(&indio_dev->mlock); > + mutex_lock(&data->lock); > ret = sc27xx_adc_read(data, chan->channel, scale, &tmp); > - mutex_unlock(&indio_dev->mlock); > + mutex_unlock(&data->lock); > > if (ret) > return ret; > @@ -675,10 +678,10 @@ static int sc27xx_adc_read_raw(struct iio_dev *indio_dev, > return IIO_VAL_INT; > > case IIO_CHAN_INFO_PROCESSED: > - mutex_lock(&indio_dev->mlock); > + mutex_lock(&data->lock); > ret = sc27xx_adc_read_processed(data, chan->channel, scale, > &tmp); > - mutex_unlock(&indio_dev->mlock); > + mutex_unlock(&data->lock); > > if (ret) > return ret; > @@ -934,6 +937,9 @@ static int sc27xx_adc_probe(struct platform_device *pdev) > indio_dev->info = &sc27xx_info; > indio_dev->channels = sc27xx_channels; > indio_dev->num_channels = ARRAY_SIZE(sc27xx_channels); > + > + mutex_init(&sc27xx_data->lock); > + > ret = devm_iio_device_register(dev, indio_dev); > if (ret) > dev_err(dev, "could not register iio (ADC)");
diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c index f8421cbba8fa..ff1fc329bb9b 100644 --- a/drivers/iio/adc/sc27xx_adc.c +++ b/drivers/iio/adc/sc27xx_adc.c @@ -4,6 +4,7 @@ #include <linux/hwspinlock.h> #include <linux/iio/iio.h> #include <linux/module.h> +#include <linux/mutex.h> #include <linux/nvmem-consumer.h> #include <linux/of.h> #include <linux/of_device.h> @@ -83,6 +84,8 @@ struct sc27xx_adc_data { struct device *dev; struct regulator *volref; struct regmap *regmap; + /* lock to protect against multiple access to the device */ + struct mutex lock; /* * One hardware spinlock to synchronize between the multiple * subsystems which will access the unique ADC controller. @@ -664,9 +667,9 @@ static int sc27xx_adc_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: - mutex_lock(&indio_dev->mlock); + mutex_lock(&data->lock); ret = sc27xx_adc_read(data, chan->channel, scale, &tmp); - mutex_unlock(&indio_dev->mlock); + mutex_unlock(&data->lock); if (ret) return ret; @@ -675,10 +678,10 @@ static int sc27xx_adc_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT; case IIO_CHAN_INFO_PROCESSED: - mutex_lock(&indio_dev->mlock); + mutex_lock(&data->lock); ret = sc27xx_adc_read_processed(data, chan->channel, scale, &tmp); - mutex_unlock(&indio_dev->mlock); + mutex_unlock(&data->lock); if (ret) return ret; @@ -934,6 +937,9 @@ static int sc27xx_adc_probe(struct platform_device *pdev) indio_dev->info = &sc27xx_info; indio_dev->channels = sc27xx_channels; indio_dev->num_channels = ARRAY_SIZE(sc27xx_channels); + + mutex_init(&sc27xx_data->lock); + ret = devm_iio_device_register(dev, indio_dev); if (ret) dev_err(dev, "could not register iio (ADC)");
The iio_device lock is only meant for internal use. Hence define a device local lock to protect against concurrent accesses. While at it, properly include "mutex.h" for mutex related APIs. Signed-off-by: Nuno Sá <nuno.sa@analog.com> --- drivers/iio/adc/sc27xx_adc.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)