| Message ID | 20221016150506.172675-2-faithilikerun@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add zoned storage emulation to virtio-blk driver | expand |
On Sun, 2022-10-16 at 23:05 +0800, Sam Li wrote: > Use scripts/update-linux-headers.sh to update virtio-blk headers > from Dmitry's "virtio-blk:add support for zoned block devices" > linux patch. There is a link for more information: > https://github.com/dmitry-fomichev/virtblk-zbd > > Signed-off-by: Sam Li <faithilikerun@gmail.com> > Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> > Signed-off-by: Sam Li <faithilikerun@gmail.com> the duplicate sign-off is not needed. With this, Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> > --- > include/standard-headers/linux/virtio_blk.h | 109 ++++++++++++++++++++ > 1 file changed, 109 insertions(+) > > diff --git a/include/standard-headers/linux/virtio_blk.h b/include/standard- > headers/linux/virtio_blk.h > index 2dcc90826a..490bd21c76 100644 > --- a/include/standard-headers/linux/virtio_blk.h > +++ b/include/standard-headers/linux/virtio_blk.h > @@ -40,6 +40,7 @@ > #define VIRTIO_BLK_F_MQ 12 /* support more than one vq */ > #define VIRTIO_BLK_F_DISCARD 13 /* DISCARD is supported */ > #define VIRTIO_BLK_F_WRITE_ZEROES 14 /* WRITE ZEROES is supported */ > +#define VIRTIO_BLK_F_ZONED 17 /* Zoned block device */ > > /* Legacy feature bits */ > #ifndef VIRTIO_BLK_NO_LEGACY > @@ -119,6 +120,20 @@ struct virtio_blk_config { > uint8_t write_zeroes_may_unmap; > > uint8_t unused1[3]; > + > + /* Secure erase fields that are defined in the virtio spec */ > + uint8_t sec_erase[12]; > + > + /* Zoned block device characteristics (if VIRTIO_BLK_F_ZONED) */ > + struct virtio_blk_zoned_characteristics { > + __virtio32 zone_sectors; > + __virtio32 max_open_zones; > + __virtio32 max_active_zones; > + __virtio32 max_append_sectors; > + __virtio32 write_granularity; > + uint8_t model; > + uint8_t unused2[3]; > + } zoned; > } QEMU_PACKED; > > /* > @@ -153,6 +168,27 @@ struct virtio_blk_config { > /* Write zeroes command */ > #define VIRTIO_BLK_T_WRITE_ZEROES 13 > > +/* Zone append command */ > +#define VIRTIO_BLK_T_ZONE_APPEND 15 > + > +/* Report zones command */ > +#define VIRTIO_BLK_T_ZONE_REPORT 16 > + > +/* Open zone command */ > +#define VIRTIO_BLK_T_ZONE_OPEN 18 > + > +/* Close zone command */ > +#define VIRTIO_BLK_T_ZONE_CLOSE 20 > + > +/* Finish zone command */ > +#define VIRTIO_BLK_T_ZONE_FINISH 22 > + > +/* Reset zone command */ > +#define VIRTIO_BLK_T_ZONE_RESET 24 > + > +/* Reset All zones command */ > +#define VIRTIO_BLK_T_ZONE_RESET_ALL 26 > + > #ifndef VIRTIO_BLK_NO_LEGACY > /* Barrier before this op. */ > #define VIRTIO_BLK_T_BARRIER 0x80000000 > @@ -172,6 +208,72 @@ struct virtio_blk_outhdr { > __virtio64 sector; > }; > > +/* > + * Supported zoned device models. > + */ > + > +/* Regular block device */ > +#define VIRTIO_BLK_Z_NONE 0 > +/* Host-managed zoned device */ > +#define VIRTIO_BLK_Z_HM 1 > +/* Host-aware zoned device */ > +#define VIRTIO_BLK_Z_HA 2 > + > +/* > + * Zone descriptor. A part of VIRTIO_BLK_T_ZONE_REPORT command reply. > + */ > +struct virtio_blk_zone_descriptor { > + /* Zone capacity */ > + __virtio64 z_cap; > + /* The starting sector of the zone */ > + __virtio64 z_start; > + /* Zone write pointer position in sectors */ > + __virtio64 z_wp; > + /* Zone type */ > + uint8_t z_type; > + /* Zone state */ > + uint8_t z_state; > + uint8_t reserved[38]; > +}; > + > +struct virtio_blk_zone_report { > + __virtio64 nr_zones; > + uint8_t reserved[56]; > + struct virtio_blk_zone_descriptor zones[]; > +}; > + > +/* > + * Supported zone types. > + */ > + > +/* Conventional zone */ > +#define VIRTIO_BLK_ZT_CONV 1 > +/* Sequential Write Required zone */ > +#define VIRTIO_BLK_ZT_SWR 2 > +/* Sequential Write Preferred zone */ > +#define VIRTIO_BLK_ZT_SWP 3 > + > +/* > + * Zone states that are available for zones of all types. > + */ > + > +/* Not a write pointer (conventional zones only) */ > +#define VIRTIO_BLK_ZS_NOT_WP 0 > +/* Empty */ > +#define VIRTIO_BLK_ZS_EMPTY 1 > +/* Implicitly Open */ > +#define VIRTIO_BLK_ZS_IOPEN 2 > +/* Explicitly Open */ > +#define VIRTIO_BLK_ZS_EOPEN 3 > +/* Closed */ > +#define VIRTIO_BLK_ZS_CLOSED 4 > +/* Read-Only */ > +#define VIRTIO_BLK_ZS_RDONLY 13 > +/* Full */ > +#define VIRTIO_BLK_ZS_FULL 14 > +/* Offline */ > +#define VIRTIO_BLK_ZS_OFFLINE 15 > + > /* Unmap this range (only valid for write zeroes command) */ > #define VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP 0x00000001 > > @@ -198,4 +300,11 @@ struct virtio_scsi_inhdr { > #define VIRTIO_BLK_S_OK 0 > #define VIRTIO_BLK_S_IOERR 1 > #define VIRTIO_BLK_S_UNSUPP 2 > + > +/* Error codes that are specific to zoned block devices */ > +#define VIRTIO_BLK_S_ZONE_INVALID_CMD 3 > +#define VIRTIO_BLK_S_ZONE_UNALIGNED_WP 4 > +#define VIRTIO_BLK_S_ZONE_OPEN_RESOURCE 5 > +#define VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE 6 > + > #endif /* _LINUX_VIRTIO_BLK_H */
On 10/17/22 09:53, Dmitry Fomichev wrote: > On Sun, 2022-10-16 at 23:05 +0800, Sam Li wrote: >> Use scripts/update-linux-headers.sh to update virtio-blk headers >> from Dmitry's "virtio-blk:add support for zoned block devices" >> linux patch. There is a link for more information: >> https://github.com/dmitry-fomichev/virtblk-zbd >> >> Signed-off-by: Sam Li <faithilikerun@gmail.com> >> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> >> Signed-off-by: Sam Li <faithilikerun@gmail.com> > > the duplicate sign-off is not needed. With this, > > Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> The mention of the linux kernel version should be removed from the patch title as the changes are not included in any upstream kernel yet. > >> --- >> include/standard-headers/linux/virtio_blk.h | 109 ++++++++++++++++++++ >> 1 file changed, 109 insertions(+) >> >> diff --git a/include/standard-headers/linux/virtio_blk.h b/include/standard- >> headers/linux/virtio_blk.h >> index 2dcc90826a..490bd21c76 100644 >> --- a/include/standard-headers/linux/virtio_blk.h >> +++ b/include/standard-headers/linux/virtio_blk.h >> @@ -40,6 +40,7 @@ >> #define VIRTIO_BLK_F_MQ 12 /* support more than one vq */ >> #define VIRTIO_BLK_F_DISCARD 13 /* DISCARD is supported */ >> #define VIRTIO_BLK_F_WRITE_ZEROES 14 /* WRITE ZEROES is supported */ >> +#define VIRTIO_BLK_F_ZONED 17 /* Zoned block device */ >> >> /* Legacy feature bits */ >> #ifndef VIRTIO_BLK_NO_LEGACY >> @@ -119,6 +120,20 @@ struct virtio_blk_config { >> uint8_t write_zeroes_may_unmap; >> >> uint8_t unused1[3]; >> + >> + /* Secure erase fields that are defined in the virtio spec */ >> + uint8_t sec_erase[12]; >> + >> + /* Zoned block device characteristics (if VIRTIO_BLK_F_ZONED) */ >> + struct virtio_blk_zoned_characteristics { >> + __virtio32 zone_sectors; >> + __virtio32 max_open_zones; >> + __virtio32 max_active_zones; >> + __virtio32 max_append_sectors; >> + __virtio32 write_granularity; >> + uint8_t model; >> + uint8_t unused2[3]; >> + } zoned; >> } QEMU_PACKED; >> >> /* >> @@ -153,6 +168,27 @@ struct virtio_blk_config { >> /* Write zeroes command */ >> #define VIRTIO_BLK_T_WRITE_ZEROES 13 >> >> +/* Zone append command */ >> +#define VIRTIO_BLK_T_ZONE_APPEND 15 >> + >> +/* Report zones command */ >> +#define VIRTIO_BLK_T_ZONE_REPORT 16 >> + >> +/* Open zone command */ >> +#define VIRTIO_BLK_T_ZONE_OPEN 18 >> + >> +/* Close zone command */ >> +#define VIRTIO_BLK_T_ZONE_CLOSE 20 >> + >> +/* Finish zone command */ >> +#define VIRTIO_BLK_T_ZONE_FINISH 22 >> + >> +/* Reset zone command */ >> +#define VIRTIO_BLK_T_ZONE_RESET 24 >> + >> +/* Reset All zones command */ >> +#define VIRTIO_BLK_T_ZONE_RESET_ALL 26 >> + >> #ifndef VIRTIO_BLK_NO_LEGACY >> /* Barrier before this op. */ >> #define VIRTIO_BLK_T_BARRIER 0x80000000 >> @@ -172,6 +208,72 @@ struct virtio_blk_outhdr { >> __virtio64 sector; >> }; >> >> +/* >> + * Supported zoned device models. >> + */ >> + >> +/* Regular block device */ >> +#define VIRTIO_BLK_Z_NONE 0 >> +/* Host-managed zoned device */ >> +#define VIRTIO_BLK_Z_HM 1 >> +/* Host-aware zoned device */ >> +#define VIRTIO_BLK_Z_HA 2 >> + >> +/* >> + * Zone descriptor. A part of VIRTIO_BLK_T_ZONE_REPORT command reply. >> + */ >> +struct virtio_blk_zone_descriptor { >> + /* Zone capacity */ >> + __virtio64 z_cap; >> + /* The starting sector of the zone */ >> + __virtio64 z_start; >> + /* Zone write pointer position in sectors */ >> + __virtio64 z_wp; >> + /* Zone type */ >> + uint8_t z_type; >> + /* Zone state */ >> + uint8_t z_state; >> + uint8_t reserved[38]; >> +}; >> + >> +struct virtio_blk_zone_report { >> + __virtio64 nr_zones; >> + uint8_t reserved[56]; >> + struct virtio_blk_zone_descriptor zones[]; >> +}; >> + >> +/* >> + * Supported zone types. >> + */ >> + >> +/* Conventional zone */ >> +#define VIRTIO_BLK_ZT_CONV 1 >> +/* Sequential Write Required zone */ >> +#define VIRTIO_BLK_ZT_SWR 2 >> +/* Sequential Write Preferred zone */ >> +#define VIRTIO_BLK_ZT_SWP 3 >> + >> +/* >> + * Zone states that are available for zones of all types. >> + */ >> + >> +/* Not a write pointer (conventional zones only) */ >> +#define VIRTIO_BLK_ZS_NOT_WP 0 >> +/* Empty */ >> +#define VIRTIO_BLK_ZS_EMPTY 1 >> +/* Implicitly Open */ >> +#define VIRTIO_BLK_ZS_IOPEN 2 >> +/* Explicitly Open */ >> +#define VIRTIO_BLK_ZS_EOPEN 3 >> +/* Closed */ >> +#define VIRTIO_BLK_ZS_CLOSED 4 >> +/* Read-Only */ >> +#define VIRTIO_BLK_ZS_RDONLY 13 >> +/* Full */ >> +#define VIRTIO_BLK_ZS_FULL 14 >> +/* Offline */ >> +#define VIRTIO_BLK_ZS_OFFLINE 15 >> + >> /* Unmap this range (only valid for write zeroes command) */ >> #define VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP 0x00000001 >> >> @@ -198,4 +300,11 @@ struct virtio_scsi_inhdr { >> #define VIRTIO_BLK_S_OK 0 >> #define VIRTIO_BLK_S_IOERR 1 >> #define VIRTIO_BLK_S_UNSUPP 2 >> + >> +/* Error codes that are specific to zoned block devices */ >> +#define VIRTIO_BLK_S_ZONE_INVALID_CMD 3 >> +#define VIRTIO_BLK_S_ZONE_UNALIGNED_WP 4 >> +#define VIRTIO_BLK_S_ZONE_OPEN_RESOURCE 5 >> +#define VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE 6 >> + >> #endif /* _LINUX_VIRTIO_BLK_H */ >
diff --git a/include/standard-headers/linux/virtio_blk.h b/include/standard-headers/linux/virtio_blk.h index 2dcc90826a..490bd21c76 100644 --- a/include/standard-headers/linux/virtio_blk.h +++ b/include/standard-headers/linux/virtio_blk.h @@ -40,6 +40,7 @@ #define VIRTIO_BLK_F_MQ 12 /* support more than one vq */ #define VIRTIO_BLK_F_DISCARD 13 /* DISCARD is supported */ #define VIRTIO_BLK_F_WRITE_ZEROES 14 /* WRITE ZEROES is supported */ +#define VIRTIO_BLK_F_ZONED 17 /* Zoned block device */ /* Legacy feature bits */ #ifndef VIRTIO_BLK_NO_LEGACY @@ -119,6 +120,20 @@ struct virtio_blk_config { uint8_t write_zeroes_may_unmap; uint8_t unused1[3]; + + /* Secure erase fields that are defined in the virtio spec */ + uint8_t sec_erase[12]; + + /* Zoned block device characteristics (if VIRTIO_BLK_F_ZONED) */ + struct virtio_blk_zoned_characteristics { + __virtio32 zone_sectors; + __virtio32 max_open_zones; + __virtio32 max_active_zones; + __virtio32 max_append_sectors; + __virtio32 write_granularity; + uint8_t model; + uint8_t unused2[3]; + } zoned; } QEMU_PACKED; /* @@ -153,6 +168,27 @@ struct virtio_blk_config { /* Write zeroes command */ #define VIRTIO_BLK_T_WRITE_ZEROES 13 +/* Zone append command */ +#define VIRTIO_BLK_T_ZONE_APPEND 15 + +/* Report zones command */ +#define VIRTIO_BLK_T_ZONE_REPORT 16 + +/* Open zone command */ +#define VIRTIO_BLK_T_ZONE_OPEN 18 + +/* Close zone command */ +#define VIRTIO_BLK_T_ZONE_CLOSE 20 + +/* Finish zone command */ +#define VIRTIO_BLK_T_ZONE_FINISH 22 + +/* Reset zone command */ +#define VIRTIO_BLK_T_ZONE_RESET 24 + +/* Reset All zones command */ +#define VIRTIO_BLK_T_ZONE_RESET_ALL 26 + #ifndef VIRTIO_BLK_NO_LEGACY /* Barrier before this op. */ #define VIRTIO_BLK_T_BARRIER 0x80000000 @@ -172,6 +208,72 @@ struct virtio_blk_outhdr { __virtio64 sector; }; +/* + * Supported zoned device models. + */ + +/* Regular block device */ +#define VIRTIO_BLK_Z_NONE 0 +/* Host-managed zoned device */ +#define VIRTIO_BLK_Z_HM 1 +/* Host-aware zoned device */ +#define VIRTIO_BLK_Z_HA 2 + +/* + * Zone descriptor. A part of VIRTIO_BLK_T_ZONE_REPORT command reply. + */ +struct virtio_blk_zone_descriptor { + /* Zone capacity */ + __virtio64 z_cap; + /* The starting sector of the zone */ + __virtio64 z_start; + /* Zone write pointer position in sectors */ + __virtio64 z_wp; + /* Zone type */ + uint8_t z_type; + /* Zone state */ + uint8_t z_state; + uint8_t reserved[38]; +}; + +struct virtio_blk_zone_report { + __virtio64 nr_zones; + uint8_t reserved[56]; + struct virtio_blk_zone_descriptor zones[]; +}; + +/* + * Supported zone types. + */ + +/* Conventional zone */ +#define VIRTIO_BLK_ZT_CONV 1 +/* Sequential Write Required zone */ +#define VIRTIO_BLK_ZT_SWR 2 +/* Sequential Write Preferred zone */ +#define VIRTIO_BLK_ZT_SWP 3 + +/* + * Zone states that are available for zones of all types. + */ + +/* Not a write pointer (conventional zones only) */ +#define VIRTIO_BLK_ZS_NOT_WP 0 +/* Empty */ +#define VIRTIO_BLK_ZS_EMPTY 1 +/* Implicitly Open */ +#define VIRTIO_BLK_ZS_IOPEN 2 +/* Explicitly Open */ +#define VIRTIO_BLK_ZS_EOPEN 3 +/* Closed */ +#define VIRTIO_BLK_ZS_CLOSED 4 +/* Read-Only */ +#define VIRTIO_BLK_ZS_RDONLY 13 +/* Full */ +#define VIRTIO_BLK_ZS_FULL 14 +/* Offline */ +#define VIRTIO_BLK_ZS_OFFLINE 15 + /* Unmap this range (only valid for write zeroes command) */ #define VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP 0x00000001 @@ -198,4 +300,11 @@ struct virtio_scsi_inhdr { #define VIRTIO_BLK_S_OK 0 #define VIRTIO_BLK_S_IOERR 1 #define VIRTIO_BLK_S_UNSUPP 2 + +/* Error codes that are specific to zoned block devices */ +#define VIRTIO_BLK_S_ZONE_INVALID_CMD 3 +#define VIRTIO_BLK_S_ZONE_UNALIGNED_WP 4 +#define VIRTIO_BLK_S_ZONE_OPEN_RESOURCE 5 +#define VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE 6 + #endif /* _LINUX_VIRTIO_BLK_H */