diff mbox series

[5/5] arm64: dts: qcom: sm8450: Add GPI DMA compatible fallback

Message ID 20221015140447.55221-6-krzysztof.kozlowski@linaro.org (mailing list archive)
State Superseded
Headers show
Series dma/arm64: qcom: use one compatible also for 0x10000 offset | expand

Commit Message

Krzysztof Kozlowski Oct. 15, 2022, 2:04 p.m. UTC 
Use SM6350 as fallback for GPI DMA, to indicate devices are compatible
and that drivers can bind with only one compatible.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Neil Armstrong Oct. 18, 2022, 1:45 p.m. UTC | #1 
On 15/10/2022 16:04, Krzysztof Kozlowski wrote:
> Use SM6350 as fallback for GPI DMA, to indicate devices are compatible
> and that drivers can bind with only one compatible.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8450.dtsi | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index d32f08df743d..e01a019d8b23 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -730,7 +730,7 @@  gcc: clock-controller@100000 {
 		};
 
 		gpi_dma2: dma-controller@800000 {
-			compatible = "qcom,sm8450-gpi-dma";
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0x800000 0 0x60000>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
@@ -1058,7 +1058,7 @@  spi21: spi@898000 {
 		};
 
 		gpi_dma0: dma-controller@900000 {
-			compatible = "qcom,sm8450-gpi-dma";
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0x900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
@@ -1394,7 +1394,7 @@  uart7: serial@99c000 {
 		};
 
 		gpi_dma1: dma-controller@a00000 {
-			compatible = "qcom,sm8450-gpi-dma";
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0xa00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,