@@ -1,6 +1,6 @@
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
-#please run as root
+# Please run as root
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
@@ -8,15 +8,76 @@ ksft_skip=4
mnt=./huge
exitcode=0
-#get huge pagesize and freepages from /proc/meminfo
-while read -r name size unit; do
- if [ "$name" = "HugePages_Free:" ]; then
- freepgs="$size"
+usage() {
+ cat <<EOF
+usage: ${BASH_SOURCE[0]:-$0} [ -h | -t "<categories>"]
+ -t: specify specific categories to tests to run
+ -h: display this message
+
+The default behavior is to run all tests.
+
+Alternatively, specific groups tests can be run by passing a string
+to the -t argument containing one or more of the following categories
+separated by spaces:
+- mmap
+ tests for mmap(2)
+- gup_test
+ tests for gup using gup_test interface
+- userfaultfd
+ tests for userfaultfd(2)
+- compaction
+ a test for the patch "Allow compaction of unevictable pages"
+- mlock
+ tests for mlock(2)
+- mremap
+ tests for mremap(2)
+- hugevm
+ tests for very large virtual address space
+- vmalloc
+ vmalloc smoke tests
+- hmm
+ hmm smoke tests
+- madv_populate
+ test memadvise(2) MADV_POPULATE_{READ,WRITE} options
+- memfd_secret
+ test memfd_secret(2)
+- process_mrelease
+ test process_mrelease(2)
+- ksm
+ ksm tests that do not require >=2 NUMA nodes
+- ksm_numa
+ ksm tests that require >=2 NUMA nodes
+- pkey
+ memory protection key tests
+example: ./run_vmtests.sh -t "hmm mmap ksm"
+EOF
+ exit 0
+}
+
+
+while getopts "ht:" OPT; do
+ case ${OPT} in
+ "h") usage ;;
+ "t") VM_SELFTEST_ITEMS=${OPTARG} ;;
+ esac
+done
+shift $((OPTIND -1))
+
+# default behavior: run all tests
+VM_SELFTEST_ITEMS=${VM_SELFTEST_ITEMS:-default}
+
+test_selected() {
+ if [ "$VM_SELFTEST_ITEMS" == "default" ]; then
+ # If no VM_SELFTEST_ITEMS are specified, run all tests
+ return 0
fi
- if [ "$name" = "Hugepagesize:" ]; then
- hpgsize_KB="$size"
+ # If test selected argument is one of the test items
+ if [[ " ${VM_SELFTEST_ITEMS[*]} " =~ " ${1} " ]]; then
+ return 0
+ else
+ return 1
fi
-done < /proc/meminfo
+}
# Simple hugetlbfs tests have a hardcoded minimum requirement of
# huge pages totaling 256MB (262144KB) in size. The userfaultfd
@@ -28,7 +89,17 @@ hpgsize_MB=$((hpgsize_KB / 1024))
half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128))
needmem_KB=$((half_ufd_size_MB * 2 * 1024))
-#set proper nr_hugepages
+# get huge pagesize and freepages from /proc/meminfo
+while read -r name size unit; do
+ if [ "$name" = "HugePages_Free:" ]; then
+ freepgs="$size"
+ fi
+ if [ "$name" = "Hugepagesize:" ]; then
+ hpgsize_KB="$size"
+ fi
+done < /proc/meminfo
+
+# set proper nr_hugepages
if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then
nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages)
needpgs=$((needmem_KB / hpgsize_KB))
@@ -57,78 +128,83 @@ else
exit 1
fi
-#filter 64bit architectures
+# filter 64bit architectures
ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64"
if [ -z "$ARCH" ]; then
ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/')
fi
VADDR64=0
-echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1
+echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1
# Usage: run_test [test binary] [arbitrary test arguments...]
run_test() {
- local title="running $*"
- local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
- printf "%s\n%s\n%s\n" "$sep" "$title" "$sep"
-
- "$@"
- local ret=$?
- if [ $ret -eq 0 ]; then
- echo "[PASS]"
- elif [ $ret -eq $ksft_skip ]; then
- echo "[SKIP]"
- exitcode=$ksft_skip
- else
- echo "[FAIL]"
- exitcode=1
- fi
+ if test_selected ${CATEGORY}; then
+ echo "running: $1"
+ local title="running $*"
+ local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
+ printf "%s\n%s\n%s\n" "$sep" "$title" "$sep"
+
+ "$@"
+ local ret=$?
+ if [ $ret -eq 0 ]; then
+ echo "[PASS]"
+ elif [ $ret -eq $ksft_skip ]; then
+ echo "[SKIP]"
+ exitcode=$ksft_skip
+ else
+ echo "[FAIL]"
+ exitcode=1
+ fi
+ fi # test_selected
}
mkdir "$mnt"
mount -t hugetlbfs none "$mnt"
-run_test ./hugepage-mmap
+CATEGORY="hugetlb" run_test ./hugepage-mmap
shmmax=$(cat /proc/sys/kernel/shmmax)
shmall=$(cat /proc/sys/kernel/shmall)
echo 268435456 > /proc/sys/kernel/shmmax
echo 4194304 > /proc/sys/kernel/shmall
-run_test ./hugepage-shm
+CATEGORY="hugetlb" run_test ./hugepage-shm
echo "$shmmax" > /proc/sys/kernel/shmmax
echo "$shmall" > /proc/sys/kernel/shmall
-run_test ./map_hugetlb
+CATEGORY="hugetlb" run_test ./map_hugetlb
-run_test ./hugepage-mremap "$mnt"/huge_mremap
-rm -f "$mnt"/huge_mremap
+CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap
+test_selected "hugetlb" && rm -f "$mnt"/huge_mremap
-run_test ./hugepage-vmemmap
+CATEGORY="hugetlb" run_test ./hugepage-vmemmap
-run_test ./hugetlb-madvise "$mnt"/madvise-test
-rm -f "$mnt"/madvise-test
+CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test
+test_selected "hugetlb" && rm -f "$mnt"/madvise-test
-echo "NOTE: The above hugetlb tests provide minimal coverage. Use"
-echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"
-echo " hugetlb regression testing."
+if test_selected "hugetlb"; then
+ echo "NOTE: These hugetlb tests provide minimal coverage. Use"
+ echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"
+ echo " hugetlb regression testing."
+fi
-run_test ./map_fixed_noreplace
+CATEGORY="mmap" run_test ./map_fixed_noreplace
# get_user_pages_fast() benchmark
-run_test ./gup_test -u
+CATEGORY="gup_test" run_test ./gup_test -u
# pin_user_pages_fast() benchmark
-run_test ./gup_test -a
+CATEGORY="gup_test" run_test ./gup_test -a
# Dump pages 0, 19, and 4096, using pin_user_pages:
-run_test ./gup_test -ct -F 0x1 0 19 0x1000
+CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000
uffd_mods=("" ":dev")
for mod in "${uffd_mods[@]}"; do
- run_test ./userfaultfd anon${mod} 20 16
+ CATEGORY="userfaultfd" run_test ./userfaultfd anon${mod} 20 16
# Hugetlb tests require source and destination huge pages. Pass in half
# the size ($half_ufd_size_MB), which is used for *each*.
- run_test ./userfaultfd hugetlb${mod} "$half_ufd_size_MB" 32
- run_test ./userfaultfd hugetlb_shared${mod} "$half_ufd_size_MB" 32 "$mnt"/uffd-test
+ CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb${mod} "$half_ufd_size_MB" 32
+ CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared${mod} "$half_ufd_size_MB" 32 "$mnt"/uffd-test
rm -f "$mnt"/uffd-test
- run_test ./userfaultfd shmem${mod} 20 16
+ CATEGORY="userfaultfd" run_test ./userfaultfd shmem${mod} 20 16
done
#cleanup
@@ -136,63 +212,63 @@ umount "$mnt"
rm -rf "$mnt"
echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages
-run_test ./compaction_test
+CATEGORY="compaction" run_test ./compaction_test
-run_test sudo -u nobody ./on-fault-limit
+CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit
-run_test ./map_populate
+CATEGORY="mmap" run_test ./map_populate
-run_test ./mlock-random-test
+CATEGORY="mlock" run_test ./mlock-random-test
-run_test ./mlock2-tests
+CATEGORY="mlock" run_test ./mlock2-tests
-run_test ./mrelease_test
+CATEGORY="process_mrelease" run_test ./mrelease_test
-run_test ./mremap_test
+CATEGORY="mremap" run_test ./mremap_test
-run_test ./thuge-gen
+CATEGORY="hugetlb" run_test ./thuge-gen
if [ $VADDR64 -ne 0 ]; then
- run_test ./virtual_address_range
+ CATEGORY="hugevm" run_test ./virtual_address_range
# virtual address 128TB switch test
- run_test ./va_128TBswitch.sh
+ CATEGORY="hugevm" run_test ./va_128TBswitch.sh
fi # VADDR64
# vmalloc stability smoke test
-run_test ./test_vmalloc.sh smoke
+CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke
-run_test ./mremap_dontunmap
+CATEGORY="mremap" run_test ./mremap_dontunmap
-run_test ./test_hmm.sh smoke
+CATEGORY="hmm" run_test ./test_hmm.sh smoke
# MADV_POPULATE_READ and MADV_POPULATE_WRITE tests
-run_test ./madv_populate
+CATEGORY="madv_populate" run_test ./madv_populate
-run_test ./memfd_secret
+CATEGORY="memfd_secret" run_test ./memfd_secret
# KSM MADV_MERGEABLE test with 10 identical pages
-run_test ./ksm_tests -M -p 10
+CATEGORY="ksm" run_test ./ksm_tests -M -p 10
# KSM unmerge test
-run_test ./ksm_tests -U
+CATEGORY="ksm" run_test ./ksm_tests -U
# KSM test with 10 zero pages and use_zero_pages = 0
-run_test ./ksm_tests -Z -p 10 -z 0
+CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0
# KSM test with 10 zero pages and use_zero_pages = 1
-run_test ./ksm_tests -Z -p 10 -z 1
+CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1
# KSM test with 2 NUMA nodes and merge_across_nodes = 1
-run_test ./ksm_tests -N -m 1
+CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1
# KSM test with 2 NUMA nodes and merge_across_nodes = 0
-run_test ./ksm_tests -N -m 0
+CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0
# protection_keys tests
if [ -x ./protection_keys_32 ]
then
- run_test ./protection_keys_32
+ CATEGORY="pkey" run_test ./protection_keys_32
fi
if [ -x ./protection_keys_64 ]
then
- run_test ./protection_keys_64
+ CATEGORY="pkey" run_test ./protection_keys_64
fi
run_test ./soft-dirty
Our memory management kernel CI testing at Red Hat uses the VM selftests and we have run into two problems: First, our LTP tests overlap with the VM selftests. We want to avoid unhelpful redundancy in our testing practices. Second, we have observed the current run_vmtests.sh to report overall failure/ambiguous results in the case that a machine lacks the necessary hardware to perform one or more of the tests. E.g. ksm tests that require more than one numa node. We want to be able to run the vm selftests suitable to particular hardware. Add the ability to run one or more groups of vm tests via run_vmtests.sh instead of simply all-or-none in order to solve these problems. Preserve existing default behavior of running all tests when the script is invoked with no arguments. Documentation of test groups is included in the patch as follows: # ./run_vmtests.sh [ -h || --help ] usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"] -t: specify specific categories to tests to run -h: display this message The default behavior is to run all tests. Alternatively, specific groups tests can be run by passing a string to the -t argument containing one or more of the following categories separated by spaces: - mmap tests for mmap(2) - gup_test tests for gup using gup_test interface - userfaultfd tests for userfaultfd(2) - compaction a test for the patch "Allow compaction of unevictable pages" - mlock tests for mlock(2) - mremap tests for mremap(2) - hugevm tests for very large virtual address space - vmalloc vmalloc smoke tests - hmm hmm smoke tests - madv_populate test memadvise(2) MADV_POPULATE_{READ,WRITE} options - memfd_secret test memfd_secret(2) - process_mrelease test process_mrelease(2) - ksm ksm tests that do not require >=2 NUMA nodes - ksm_numa ksm tests that require >=2 NUMA nodes - pkey memory protection key tests example: ./run_vmtests.sh -t "hmm mmap ksm" Changes from v5: - rebase onto mainline master branch - integrate changes to pkey and userfaultfd invocation sites Changes from v4: - fix imprecise checking in test_selected - drop conditional setup/cleanup of hugetlb Changes from v3: - rename variable TEST_ITEMS as VM_TEST_ITEMS Changes from v2: - rebase onto the mm-everyting branch in https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git - integrate this functionality with new the tests Changes from v1: - use a command line argument to pass the test categories to the script instead of an environmet variable - remove novel prints to avoid messing with extant parsers of this script - update the usage text Signed-off-by: Joel Savitz <jsavitz@redhat.com> --- tools/testing/selftests/vm/run_vmtests.sh | 212 +++++++++++++++------- 1 file changed, 144 insertions(+), 68 deletions(-)