[v2,2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

Commit Message

Melody Olvera Oct. 14, 2022, 10:11 p.m. UTC

Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
to boot to shell with console on these SoCs.

Signed-off-by: Melody Olvera <[e-mail]>
---
 arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
 2 files changed, 1673 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi

Comments

Krzysztof Kozlowski Oct. 15, 2022, 1:28 p.m. UTC | #1

On 14/10/2022 18:11, Melody Olvera wrote:
> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
> to boot to shell with console on these SoCs.
> 
> Signed-off-by: Melody Olvera <[e-mail]>
> ---
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>  2 files changed, 1673 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> new file mode 100644
> index 000000000000..777734b30f56
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -0,0 +1,1646 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/dma/qcom-gpi.h>
> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +
> +/ {
> +	interrupt-parent = <&intc>;
> +
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	chosen: chosen { };
> +
> +	clocks {
> +		xo_board: xo-board {
> +			compatible = "fixed-clock";
> +			clock-frequency = <19200000>;

Both clocks are not a property of a SoC. They are provided by the board,
so they should either be defined by board DTS or at least their
frequency must be provided by the board.

> +			clock-output-names = "xo_board";
> +			#clock-cells = <0>;
> +		};
> +
> +		sleep_clk: sleep-clk {
> +			compatible = "fixed-clock";
> +			clock-frequency = <32000>;
> +			#clock-cells = <0>;
> +		};
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		CPU0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			power-domain-names = "psci";
> +			power-domains = <&CPU_PD0>;
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_0>;
> +			L2_0: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;

Wrong indentation.

> +				L3_0: l3-cache {
> +					compatible = "cache";
> +				};
> +			};
> +		};
> +
> +		CPU1: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x100>;
> +			enable-method = "psci";
> +			power-domains = <&CPU_PD1>;
> +			power-domain-names = "psci";
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_100>;
> +			L2_100: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +

Drop empty lines like that.

> +		};
> +
> +		CPU2: cpu@200 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x200>;
> +			enable-method = "psci";
> +			power-domains = <&CPU_PD2>;
> +			power-domain-names = "psci";
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_200>;
> +			L2_200: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU3: cpu@300 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x300>;
> +			enable-method = "psci";
> +			power-domains = <&CPU_PD3>;
> +			power-domain-names = "psci";
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_300>;
> +			L2_300: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +

Here...

> +		};
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&CPU0>;
> +				};
> +
> +				core1 {
> +					cpu = <&CPU1>;
> +				};
> +
> +				core2 {
> +					cpu = <&CPU2>;
> +				};
> +
> +				core3 {
> +					cpu = <&CPU3>;
> +				};
> +			};
> +		};
> +	};
> +
> +	idle-states {
> +		entry-method = "psci";
> +
> +		CPU_OFF: cpu-sleep-0 {
> +			compatible = "arm,idle-state";
> +			idle-state-name = "rail-pc";
> +			entry-latency-us = <274>;
> +			exit-latency-us = <480>;
> +			min-residency-us = <3934>;
> +			arm,psci-suspend-param = <0x40000004>;
> +			local-timer-stop;
> +		};
> +	};
> +
> +	domain-idle-states {
> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
> +			compatible = "domain-idle-state";
> +			idle-state-name = "cluster-l3-off";
> +			entry-latency-us = <584>;
> +			exit-latency-us = <2332>;
> +			min-residency-us = <6118>;
> +			arm,psci-suspend-param = <0x41000044>;
> +		};
> +
> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
> +			compatible = "domain-idle-state";
> +			idle-state-name = "cluster-power-collapse";
> +			entry-latency-us = <2893>;
> +			exit-latency-us = <4023>;
> +			min-residency-us = <9987>;
> +			arm,psci-suspend-param = <0x41003344>;
> +		};
> +	};
> +
> +	firmware {
> +		qcom_scm {

No underscores in node names. This applies everywhere.

Node names should be generic, so just scm.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
> +			#reset-cells = <1>;
> +		};
> +	};
> +
> +	clk_virt: interconnect-0 {
> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
> +		#interconnect-cells = <2>;
> +		qcom,bcm-voters = <&apps_bcm_voter>;
> +	};
> +
> +	mc_virt: interconnect-1 {
> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
> +		#interconnect-cells = <2>;
> +		qcom,bcm-voters = <&apps_bcm_voter>;
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		/* We expect the bootloader to fill in the size */
> +		reg = <0x0 0x80000000 0x0 0x0>;
> +	};
> +
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +
> +		CPU_PD0: cpu-pd0 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CPU_PD1: cpu-pd1 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CPU_PD2: cpu-pd2 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CPU_PD3: cpu-pd3 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CLUSTER_PD: cluster-pd {
> +			#power-domain-cells = <0>;
> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
> +		};
> +	};
> +
> +	reserved_memory: reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		hyp_mem: memory@80000000 {
> +			no-map;
> +			reg = <0x0 0x80000000 0x0 0x600000>;
> +		};
> +
> +		xbl_dt_log_mem: memory@80600000 {
> +			no-map;
> +			reg = <0x0 0x80600000 0x0 0x40000>;
> +		};
> +
> +		xbl_ramdump_mem: memory@80640000 {
> +			no-map;
> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
> +		};
> +
> +		aop_image_mem: memory@80800000 {
> +			no-map;
> +			reg = <0x0 0x80800000 0x0 0x60000>;
> +		};
> +
> +		aop_cmd_db_mem: memory@80860000 {
> +			compatible = "qcom,cmd-db";
> +			no-map;
> +			reg = <0x0 0x80860000 0x0 0x20000>;
> +		};
> +
> +		aop_config_mem: memory@80880000 {
> +			no-map;
> +			reg = <0x0 0x80880000 0x0 0x20000>;
> +		};
> +
> +		tme_crash_dump_mem: memory@808a0000 {
> +			no-map;
> +			reg = <0x0 0x808a0000 0x0 0x40000>;
> +		};
> +
> +		tme_log_mem: memory@808e0000 {
> +			no-map;
> +			reg = <0x0 0x808e0000 0x0 0x4000>;
> +		};
> +
> +		uefi_log_mem: memory@808e4000 {
> +			no-map;
> +			reg = <0x0 0x808e4000 0x0 0x10000>;
> +		};
> +
> +		/* secdata region can be reused by apps */
> +
> +		smem_mem: memory@80900000 {
> +			compatible = "qcom,smem";
> +			no-map;
> +			reg = <0x0 0x80900000 0x0 0x200000>;
> +			hwlocks = <&tcsr_mutex 3>;
> +		};
> +
> +		cpucp_fw_mem: memory@80b00000 {
> +			no-map;
> +			reg = <0x0 0x80b00000 0x0 0x100000>;
> +		};
> +
> +		xbl_sc_mem: memory@80c00000 {
> +			no-map;
> +			reg = <0x0 0x80c00000 0x0 0x40000>;
> +		};
> +
> +		/* uefi region can be reused by apps */
> +
> +		tz_stat_mem: memory@81d00000 {
> +			no-map;
> +			reg = <0x0 0x81d00000 0x0 0x100000>;
> +		};
> +
> +		tags_mem: memory@81e00000 {
> +			no-map;
> +			reg = <0x0 0x81e00000 0x0 0x500000>;
> +		};
> +
> +		qtee_mem: memory@82300000 {
> +			no-map;
> +			reg = <0x0 0x82300000 0x0 0x500000>;
> +		};
> +
> +		ta_mem: memory@82800000 {
> +			no-map;
> +			reg = <0x0 0x82800000 0x0 0xa00000>;
> +		};
> +
> +		fs1_mem: memory@83200000 {
> +			no-map;
> +			reg = <0x0 0x83200000 0x0 0x400000>;
> +		};
> +
> +		fs2_mem: memory@83600000 {
> +			no-map;
> +			reg = <0x0 0x83600000 0x0 0x400000>;
> +		};
> +
> +		fs3_mem: memory@83a00000 {
> +			no-map;
> +			reg = <0x0 0x83a00000 0x0 0x400000>;
> +		};
> +
> +		/* Linux kernel image is loaded at 0x83e00000 */
> +
> +		ipa_fw_mem: memory@8be00000 {
> +			no-map;
> +			reg = <0x0 0x8be00000 0x0 0x10000>;
> +		};
> +
> +		ipa_gsi_mem: memory@8be10000 {
> +			no-map;
> +			reg = <0x0 0x8be10000 0x0 0x14000>;
> +		};
> +
> +		mpss_mem: memory@8c000000 {
> +			no-map;
> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
> +		};
> +
> +		q6_mpss_dtb_mem: memory@9ec00000 {
> +			no-map;
> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
> +		};
> +
> +		tenx_mem: memory@a0000000 {
> +			no-map;
> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
> +		};
> +
> +		oem_tenx_mem: memory@b9600000 {
> +			no-map;
> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
> +		};
> +
> +		tenx_q6_buffer_mem: memory@c0000000 {
> +			no-map;
> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
> +		};
> +
> +		ipa_buffer_mem: memory@c3200000 {
> +			no-map;
> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
> +		};
> +	};
> +
> +	soc: soc@0 {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges = <0 0 0 0 0x10 0>;
> +		dma-ranges = <0 0 0 0 0x10 0>;
> +		compatible = "simple-bus";
> +
> +		gcc: clock-controller@80000 {
> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
> +			reg = <0x0 0x80000 0x0 0x1f4200>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
> +			clock-names = "bi_tcxo", "sleep_clk";
> +		};
> +
> +		gpi_dma0: dma-controller@900000  {
> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
> +			#dma-cells = <5>;
> +			reg = <0x0 0x900000 0x0 0x60000>;
> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> +			dma-channels = <12>;
> +			dma-channel-mask = <0x3f>;
> +			iommus = <&apps_smmu 0xf6 0x0>;
> +			status = "ok";

Drop it everywhere. It's by default.

> +		};
> +
> +		qupv3_id_0: geniqup@9c0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x0 0x9c0000 0x0 0x2000>;
> +			clock-names = "m-ahb", "s-ahb";
> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> +			iommus = <&apps_smmu 0xe3 0x0>;
> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
> +			interconnect-names = "qup-core";
> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
> +			qcom,iommu-dma = "fastmap";
> +			dma-coherent;
> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			status = "disabled";
> +
> +			uart0: serial@980000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0x0 0x980000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart0_default>;
> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c1: i2c@984000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x984000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c1_data_clk>;
> +				dmas = <&gpi_dma0 0 1 3 64 0>,
> +					<&gpi_dma0 1 1 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi1: spi@984000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x984000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
> +				dmas = <&gpi_dma0 0 1 1 64 0>,
> +					<&gpi_dma0 1 1 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c2: i2c@988000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x988000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c2_data_clk>;
> +				dmas = <&gpi_dma0 0 2 3 64 0>,
> +					<&gpi_dma0 1 2 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi2: spi@988000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x988000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
> +				dmas = <&gpi_dma0 0 2 1 64 0>,
> +					<&gpi_dma0 1 2 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c3: i2c@98c000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x98c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c3_data_clk>;
> +				dmas = <&gpi_dma0 0 3 3 64 0>,
> +					<&gpi_dma0 1 3 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi3: spi@98c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x98c000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
> +				dmas = <&gpi_dma0 0 3 1 64 0>,
> +					<&gpi_dma0 1 3 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c4: i2c@990000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x990000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c4_data_clk>;
> +				dmas = <&gpi_dma0 0 4 3 64 0>,
> +					<&gpi_dma0 1 4 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi4: spi@990000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x990000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
> +				dmas = <&gpi_dma0 0 4 1 64 0>,
> +					<&gpi_dma0 1 4 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c5: i2c@994000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x994000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c5_data_clk>;
> +				dmas = <&gpi_dma0 0 5 3 64 0>,
> +					<&gpi_dma0 1 5 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi5: spi@994000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x994000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
> +				dmas = <&gpi_dma0 0 5 1 64 0>,
> +					<&gpi_dma0 1 5 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c6: i2c@998000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x998000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c6_data_clk>;
> +				dmas = <&gpi_dma0 0 6 3 64 0>,
> +					<&gpi_dma0 1 6 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi6: spi@998000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x998000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
> +				dmas = <&gpi_dma0 0 6 1 64 0>,
> +					<&gpi_dma0 1 6 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			uart7: serial@99c000 {
> +				compatible = "qcom,geni-debug-uart";
> +				reg = <0x0 0x99c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		gpi_dma1: dma-controller@a00000  {
> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
> +			#dma-cells = <5>;
> +			reg = <0x0 0xa00000 0x0 0x60000>;
> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
> +			dma-channels = <12>;
> +			dma-channel-mask = <0x3f>;
> +			iommus = <&apps_smmu 0x116 0x0>;
> +			status = "ok";

And here

> +		};
> +
> +		qupv3_id_1: geniqup@ac0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x0 0xac0000 0x0 0x2000>;
> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> +			iommus = <&apps_smmu 0x103 0x0>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			clock-names = "m-ahb", "s-ahb";

clock-names *always* follow clocks

> +
> +			ranges;
> +			status = "disabled";
> +
> +			uart8: serial@a80000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0x0 0xa80000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart8_default>;
> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c9: i2c@a84000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa84000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c9_data_clk>;
> +				dmas = <&gpi_dma1 0 1 3 64 0>,
> +					<&gpi_dma1 1 1 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi9: spi@a84000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa84000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
> +				dmas = <&gpi_dma1 0 1 1 64 0>,
> +					<&gpi_dma1 1 1 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c10: i2c@a88000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa88000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c10_data_clk>;
> +				dmas = <&gpi_dma1 0 2 3 64 0>,
> +					<&gpi_dma1 1 2 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi10: spi@a88000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa88000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
> +				dmas = <&gpi_dma1 0 2 1 64 0>,
> +					<&gpi_dma1 1 2 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c11: i2c@a8c000 {
> +				compatible = "qcom,i2c-geni";
> +				reg = <0x0 0xa8c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c11_data_clk>;
> +				dmas = <&gpi_dma1 0 3 3 64 0>,
> +					<&gpi_dma1 1 3 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi11: spi@a8c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa8c000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
> +				dmas = <&gpi_dma1 0 3 1 64 0>,
> +					<&gpi_dma1 1 3 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c12: i2c@a90000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa90000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c12_data_clk>;
> +				dmas = <&gpi_dma1 0 4 3 64 0>,
> +					<&gpi_dma1 1 4 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi12: spi@a90000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa90000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
> +				dmas = <&gpi_dma1 0 4 1 64 0>,
> +					<&gpi_dma1 1 4 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c13: i2c@a94000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa94000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c13_data_clk>;
> +				dmas = <&gpi_dma1 0 5 3 64 0>,
> +					<&gpi_dma1 1 5 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			uart13: serial@a94000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0x0 0xa94000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart13_default>;
> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi13: spi@a94000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa94000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
> +				dmas = <&gpi_dma1 0 5 1 64 0>,
> +					<&gpi_dma1 1 5 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c14: i2c@a98000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa98000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c14_data_clk>;
> +				dmas = <&gpi_dma1 0 6 3 64 0>,
> +					<&gpi_dma1 1 6 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi14: spi@a98000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa98000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
> +				dmas = <&gpi_dma1 0 6 1 64 0>,
> +					<&gpi_dma1 1 6 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c15: i2c@a9c000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa9c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c15_data_clk>;
> +				dmas = <&gpi_dma1 0 7 3 64 0>,
> +					<&gpi_dma1 1 7 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi15: spi@a9c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa9c000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
> +				dmas = <&gpi_dma1 0 7 1 64 0>,
> +					<&gpi_dma1 1 7 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +		};
> +
> +		system_noc: interconnect@1640000 {
> +			reg = <0x0 0x1640000 0x0 0x45080>;
> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		tcsr_mutex: hwlock@1f40000 {
> +			compatible = "qcom,tcsr-mutex";
> +			reg = <0x0 0x1f40000 0x0 0x20000>;
> +			#hwlock-cells = <1>;
> +		};
> +
> +		pdc: interrupt-controller@b220000 {
> +			compatible = "qcom,pdc";
> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
> +					  <94 609 31>, <125 63 1>;
> +			#interrupt-cells = <2>;
> +			interrupt-parent = <&intc>;
> +			interrupt-controller;
> +		};
> +
> +		spmi_bus: spmi@c400000 {
> +			compatible = "qcom,spmi-pmic-arb";
> +			reg = <0x0 0xc400000 0x0 0x3000>,
> +			      <0x0 0xc500000 0x0 0x400000>,
> +			      <0x0 0xc440000 0x0 0x80000>,
> +			      <0x0 0xc4c0000 0x0 0x10000>,
> +			      <0x0 0xc42d000 0x0 0x4000>;
> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> +			interrupt-names = "periph_irq";
> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,ee = <0>;
> +			qcom,channel = <0>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +			interrupt-controller;
> +			#interrupt-cells = <4>;
> +		};
> +
> +		tlmm: pinctrl@f000000 {
> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
> +			reg = <0x0 0xf000000 0x0 0x1000000>;
> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			gpio-ranges = <&tlmm 0 0 151>;
> +			wakeup-parent = <&pdc>;
> +
> +			qup_uart0_default: qup-uart0-default-state {
> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
> +				function = "qup00";
> +			};
> +
> +			qup_i2c1_data_clk: qup-i2c1-data-clk {

-state suffix

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

> +				pins = "gpio10", "gpio11";
> +				function = "qup01";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi1_data_clk: qup-spi1-data-clk {> +				pins = "gpio10", "gpio11", "gpio12";
> +				function = "qup01";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi1_cs: qup-spi1-cs {
> +				pins = "gpio13";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
> +				pins = "gpio12", "gpio13";
> +				function = "qup02";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi2_data_clk: qup-spi2-data-clk {
> +				pins = "gpio12", "gpio13", "gpio10";
> +				function = "qup02";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi2_cs: qup-spi2-cs {
> +				pins = "gpio11";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
> +				pins = "gpio14", "gpio15";
> +				function = "qup03";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi3_data_clk: qup-spi3-data-clk {
> +				pins = "gpio14", "gpio15", "gpio16";
> +				function = "qup03";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi3_cs: qup-spi3-cs {
> +				pins = "gpio17";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
> +				pins = "gpio16", "gpio17";
> +				function = "qup04";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi4_data_clk: qup-spi4-data-clk {
> +				pins = "gpio16", "gpio17", "gpio14";
> +				function = "qup04";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi4_cs: qup-spi4-cs {
> +				pins = "gpio15";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
> +				pins = "gpio130", "gpio131";
> +				function = "qup05";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi5_data_clk: qup-spi5-data-clk {
> +				pins = "gpio130", "gpio131", "gpio132";
> +				function = "qup05";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi5_cs: qup-spi5-cs {
> +				pins = "gpio133";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
> +				pins = "gpio132", "gpio133";
> +				function = "qup06";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi6_data_clk: qup-spi6-data-clk {
> +				pins = "gpio132", "gpio133", "gpio130";
> +				function = "qup06";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi6_cs: qup-spi6-cs {
> +				pins = "gpio131";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_uart7_rx: qup-uart7-rx {
> +				pins = "gpio135";
> +				function = "qup07";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			qup_uart7_tx: qup-uart7-tx  {
> +				pins = "gpio134";
> +				function = "qup07";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			qup_uart8_default: qup-uart8-default {
> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
> +				function = "qup10";
> +			};
> +
> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
> +				pins = "gpio22", "gpio23";
> +				function = "qup11";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi9_data_clk: qup-spi9-data-clk {
> +				pins = "gpio22", "gpio23", "gpio24";
> +				function = "qup11";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi9_cs: qup-spi9-cs {
> +				pins = "gpio25";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
> +				pins = "gpio24", "gpio25";
> +				function = "qup12";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi10_data_clk: qup-spi10-data-clk {
> +				pins = "gpio24", "gpio25", "gpio22";
> +				function = "qup12";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi10_cs: qup-spi10-cs {
> +				pins = "gpio23";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
> +				pins = "gpio26", "gpio27";
> +				function = "qup13";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi11_data_clk: qup-spi11-data-clk {
> +				pins = "gpio26", "gpio27", "gpio28";
> +				function = "qup13";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi11_cs: qup-spi11-cs {
> +				pins = "gpio29";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
> +				pins = "gpio28", "gpio29";
> +				function = "qup14";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi12_data_clk: qup-spi12-data-clk {
> +				pins = "gpio28", "gpio29", "gpio26";
> +				function = "qup14";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi12_cs: qup-spi12-cs {
> +				pins = "gpio27";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
> +				pins = "gpio30", "gpio31";
> +				function = "qup15";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi13_data_clk: qup-spi13-data-clk {
> +				pins = "gpio30", "gpio31", "gpio32";
> +				function = "qup15";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi13_cs: qup-spi13-cs {
> +				pins = "gpio33";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_uart13_default: qup-uart13-default {
> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
> +				function = "qup15";
> +			};
> +
> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
> +				pins = "gpio34", "gpio35";
> +				function = "qup16";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi14_data_clk: qup-spi14-data-clk {
> +				pins = "gpio34", "gpio35", "gpio36";
> +				function = "qup16";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi14_cs: qup-spi14-cs {
> +				pins = "gpio37", "gpio38";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
> +				pins = "gpio40", "gpio41";
> +				function = "qup17";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi15_data_clk: qup-spi15-data-clk {
> +				pins = "gpio40", "gpio41", "gpio30";
> +				function = "qup17";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi15_cs: qup-spi15-cs {
> +				pins = "gpio31";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +		};
> +
> +		apps_smmu: apps-smmu@15000000 {
> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
> +				"arm,mmu-500";
> +			reg = <0x0 0x15000000 0x0 0x100000>;
> +			#iommu-cells = <2>;
> +			#global-interrupts = <2>;
> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		intc: interrupt-controller@17200000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			#redistributor-regions = <1>;
> +			redistributor-stride = <0x0 0x20000>;
> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> +		};
> +
> +		timer@17420000 {
> +			compatible = "arm,armv7-timer-mem";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			reg = <0x0 0x17420000 0x0 0x1000>;
> +			clock-frequency = <19200000>;
> +
> +			frame@17421000 {
> +				frame-number = <0>;
> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17421000 0x0 0x1000>,
> +				      <0x0 0x17422000 0x0 0x1000>;
> +			};
> +
> +			frame@17423000 {
> +				frame-number = <1>;
> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17423000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17425000 {
> +				frame-number = <2>;
> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17425000 0x0 0x1000>,
> +				      <0x0 0x17426000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17427000 {
> +				frame-number = <3>;
> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17427000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17429000 {
> +				frame-number = <4>;
> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17429000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@1742b000 {
> +				frame-number = <5>;
> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x1742b000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@1742d000 {
> +				frame-number = <6>;
> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x1742d000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		apps_rsc: rsc@17a00000 {
> +			label = "apps_rsc";
> +			compatible = "qcom,rpmh-rsc";

compatible, then reg, then the rest.

> +			reg = <0x0 0x17a00000 0x0 0x10000>,
> +			      <0x0 0x17a10000 0x0 0x10000>,
> +			      <0x0 0x17a20000 0x0 0x10000>;
> +			reg-names = "drv-0", "drv-1", "drv-2";
> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,tcs-offset = <0xd00>;
> +			qcom,drv-id = <2>;
> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
> +
> +			apps_bcm_voter: bcm_voter {

Eh...

Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).

> +				compatible = "qcom,bcm-voter";
> +			};




Best regards,
Krzysztof

Krzysztof Kozlowski Oct. 15, 2022, 3:11 p.m. UTC | #2

On 14/10/2022 18:11, Melody Olvera wrote:

(...)

> +
> +	firmware {
> +		qcom_scm {
> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
> +			#reset-cells = <1>;
> +		};
> +	};
> +
> +	clk_virt: interconnect-0 {
> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";

How does this pass your dtbs_check tests?

This applies everywhere...


Best regards,
Krzysztof

Krzysztof Kozlowski Oct. 18, 2022, 10:15 p.m. UTC | #3

On 14/10/2022 18:11, Melody Olvera wrote:
> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
> to boot to shell with console on these SoCs.
> 
> Signed-off-by: Melody Olvera <[e-mail]>
> ---
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>  2 files changed, 1673 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> new file mode 100644
> index 000000000000..777734b30f56
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -0,0 +1,1646 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/dma/qcom-gpi.h>
> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>

As pointed out by kernel test robot, your patchset is unbuildable and
unmerge'able, so automated tools cannot test it.

Best regards,
Krzysztof

Melody Olvera Oct. 19, 2022, 6:56 p.m. UTC | #4

On 10/18/2022 3:15 PM, Krzysztof Kozlowski wrote:
> On 14/10/2022 18:11, Melody Olvera wrote:
>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>> to boot to shell with console on these SoCs.
>>
>> Signed-off-by: Melody Olvera <[e-mail]>
>> ---
>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>  2 files changed, 1673 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> new file mode 100644
>> index 000000000000..777734b30f56
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> @@ -0,0 +1,1646 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>> +#include <dt-bindings/clock/qcom,rpmh.h>
>> +#include <dt-bindings/dma/qcom-gpi.h>
>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>> +#include <dt-bindings/power/qcom-rpmpd.h>
>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> As pointed out by kernel test robot, your patchset is unbuildable and
> unmerge'able, so automated tools cannot test it.
I saw. I will be more explicit about the dependencies on previous patches
in the next patchset.

Thanks,
Melody

Melody Olvera Oct. 19, 2022, 8:21 p.m. UTC | #5

On 10/15/2022 6:28 AM, Krzysztof Kozlowski wrote:
> On 14/10/2022 18:11, Melody Olvera wrote:
>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>> to boot to shell with console on these SoCs.
>>
>> Signed-off-by: Melody Olvera <[e-mail]>
>> ---
>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>  2 files changed, 1673 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> new file mode 100644
>> index 000000000000..777734b30f56
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> @@ -0,0 +1,1646 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>> +#include <dt-bindings/clock/qcom,rpmh.h>
>> +#include <dt-bindings/dma/qcom-gpi.h>
>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>> +#include <dt-bindings/power/qcom-rpmpd.h>
>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +
>> +/ {
>> +	interrupt-parent = <&intc>;
>> +
>> +	#address-cells = <2>;
>> +	#size-cells = <2>;
>> +
>> +	chosen: chosen { };
>> +
>> +	clocks {
>> +		xo_board: xo-board {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <19200000>;
> Both clocks are not a property of a SoC. They are provided by the board,
> so they should either be defined by board DTS or at least their
> frequency must be provided by the board.
That doesn't seem in keeping with precedent.... the sm8* series all have the clocks in
the dtsi. These are common to the boards anyways.
>
>> +			clock-output-names = "xo_board";
>> +			#clock-cells = <0>;
>> +		};
>> +
>> +		sleep_clk: sleep-clk {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <32000>;
>> +			#clock-cells = <0>;
>> +		};
>> +	};
>> +
>> +	cpus {
>> +		#address-cells = <2>;
>> +		#size-cells = <0>;
>> +
>> +		CPU0: cpu@0 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x0>;
>> +			enable-method = "psci";
>> +			power-domain-names = "psci";
>> +			power-domains = <&CPU_PD0>;
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_0>;
>> +			L2_0: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
> Wrong indentation.
Will fix for all caches.
>
>> +				L3_0: l3-cache {
>> +					compatible = "cache";
>> +				};
>> +			};
>> +		};
>> +
>> +		CPU1: cpu@100 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x100>;
>> +			enable-method = "psci";
>> +			power-domains = <&CPU_PD1>;
>> +			power-domain-names = "psci";
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_100>;
>> +			L2_100: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
>> +			};
>> +
> Drop empty lines like that.
Ack.
>
>> +		};
>> +
>> +		CPU2: cpu@200 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x200>;
>> +			enable-method = "psci";
>> +			power-domains = <&CPU_PD2>;
>> +			power-domain-names = "psci";
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_200>;
>> +			L2_200: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
>> +			};
>> +		};
>> +
>> +		CPU3: cpu@300 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x300>;
>> +			enable-method = "psci";
>> +			power-domains = <&CPU_PD3>;
>> +			power-domain-names = "psci";
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_300>;
>> +			L2_300: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
>> +			};
>> +
> Here...
Ack.
>
>> +		};
>> +
>> +		cpu-map {
>> +			cluster0 {
>> +				core0 {
>> +					cpu = <&CPU0>;
>> +				};
>> +
>> +				core1 {
>> +					cpu = <&CPU1>;
>> +				};
>> +
>> +				core2 {
>> +					cpu = <&CPU2>;
>> +				};
>> +
>> +				core3 {
>> +					cpu = <&CPU3>;
>> +				};
>> +			};
>> +		};
>> +	};
>> +
>> +	idle-states {
>> +		entry-method = "psci";
>> +
>> +		CPU_OFF: cpu-sleep-0 {
>> +			compatible = "arm,idle-state";
>> +			idle-state-name = "rail-pc";
>> +			entry-latency-us = <274>;
>> +			exit-latency-us = <480>;
>> +			min-residency-us = <3934>;
>> +			arm,psci-suspend-param = <0x40000004>;
>> +			local-timer-stop;
>> +		};
>> +	};
>> +
>> +	domain-idle-states {
>> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
>> +			compatible = "domain-idle-state";
>> +			idle-state-name = "cluster-l3-off";
>> +			entry-latency-us = <584>;
>> +			exit-latency-us = <2332>;
>> +			min-residency-us = <6118>;
>> +			arm,psci-suspend-param = <0x41000044>;
>> +		};
>> +
>> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
>> +			compatible = "domain-idle-state";
>> +			idle-state-name = "cluster-power-collapse";
>> +			entry-latency-us = <2893>;
>> +			exit-latency-us = <4023>;
>> +			min-residency-us = <9987>;
>> +			arm,psci-suspend-param = <0x41003344>;
>> +		};
>> +	};
>> +
>> +	firmware {
>> +		qcom_scm {
> No underscores in node names. This applies everywhere.
Understood; must've missed prior to submitting. Will be more meticulous.
> Node names should be generic, so just scm.
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Got it.
>
>> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
>> +			#reset-cells = <1>;
>> +		};
>> +	};
>> +
>> +	clk_virt: interconnect-0 {
>> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
>> +		#interconnect-cells = <2>;
>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>> +	};
>> +
>> +	mc_virt: interconnect-1 {
>> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
>> +		#interconnect-cells = <2>;
>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>> +	};
>> +
>> +	memory@80000000 {
>> +		device_type = "memory";
>> +		/* We expect the bootloader to fill in the size */
>> +		reg = <0x0 0x80000000 0x0 0x0>;
>> +	};
>> +
>> +	pmu {
>> +		compatible = "arm,armv8-pmuv3";
>> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> +	};
>> +
>> +	psci {
>> +		compatible = "arm,psci-1.0";
>> +		method = "smc";
>> +
>> +		CPU_PD0: cpu-pd0 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CPU_PD1: cpu-pd1 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CPU_PD2: cpu-pd2 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CPU_PD3: cpu-pd3 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CLUSTER_PD: cluster-pd {
>> +			#power-domain-cells = <0>;
>> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
>> +		};
>> +	};
>> +
>> +	reserved_memory: reserved-memory {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
>> +
>> +		hyp_mem: memory@80000000 {
>> +			no-map;
>> +			reg = <0x0 0x80000000 0x0 0x600000>;
>> +		};
>> +
>> +		xbl_dt_log_mem: memory@80600000 {
>> +			no-map;
>> +			reg = <0x0 0x80600000 0x0 0x40000>;
>> +		};
>> +
>> +		xbl_ramdump_mem: memory@80640000 {
>> +			no-map;
>> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
>> +		};
>> +
>> +		aop_image_mem: memory@80800000 {
>> +			no-map;
>> +			reg = <0x0 0x80800000 0x0 0x60000>;
>> +		};
>> +
>> +		aop_cmd_db_mem: memory@80860000 {
>> +			compatible = "qcom,cmd-db";
>> +			no-map;
>> +			reg = <0x0 0x80860000 0x0 0x20000>;
>> +		};
>> +
>> +		aop_config_mem: memory@80880000 {
>> +			no-map;
>> +			reg = <0x0 0x80880000 0x0 0x20000>;
>> +		};
>> +
>> +		tme_crash_dump_mem: memory@808a0000 {
>> +			no-map;
>> +			reg = <0x0 0x808a0000 0x0 0x40000>;
>> +		};
>> +
>> +		tme_log_mem: memory@808e0000 {
>> +			no-map;
>> +			reg = <0x0 0x808e0000 0x0 0x4000>;
>> +		};
>> +
>> +		uefi_log_mem: memory@808e4000 {
>> +			no-map;
>> +			reg = <0x0 0x808e4000 0x0 0x10000>;
>> +		};
>> +
>> +		/* secdata region can be reused by apps */
>> +
>> +		smem_mem: memory@80900000 {
>> +			compatible = "qcom,smem";
>> +			no-map;
>> +			reg = <0x0 0x80900000 0x0 0x200000>;
>> +			hwlocks = <&tcsr_mutex 3>;
>> +		};
>> +
>> +		cpucp_fw_mem: memory@80b00000 {
>> +			no-map;
>> +			reg = <0x0 0x80b00000 0x0 0x100000>;
>> +		};
>> +
>> +		xbl_sc_mem: memory@80c00000 {
>> +			no-map;
>> +			reg = <0x0 0x80c00000 0x0 0x40000>;
>> +		};
>> +
>> +		/* uefi region can be reused by apps */
>> +
>> +		tz_stat_mem: memory@81d00000 {
>> +			no-map;
>> +			reg = <0x0 0x81d00000 0x0 0x100000>;
>> +		};
>> +
>> +		tags_mem: memory@81e00000 {
>> +			no-map;
>> +			reg = <0x0 0x81e00000 0x0 0x500000>;
>> +		};
>> +
>> +		qtee_mem: memory@82300000 {
>> +			no-map;
>> +			reg = <0x0 0x82300000 0x0 0x500000>;
>> +		};
>> +
>> +		ta_mem: memory@82800000 {
>> +			no-map;
>> +			reg = <0x0 0x82800000 0x0 0xa00000>;
>> +		};
>> +
>> +		fs1_mem: memory@83200000 {
>> +			no-map;
>> +			reg = <0x0 0x83200000 0x0 0x400000>;
>> +		};
>> +
>> +		fs2_mem: memory@83600000 {
>> +			no-map;
>> +			reg = <0x0 0x83600000 0x0 0x400000>;
>> +		};
>> +
>> +		fs3_mem: memory@83a00000 {
>> +			no-map;
>> +			reg = <0x0 0x83a00000 0x0 0x400000>;
>> +		};
>> +
>> +		/* Linux kernel image is loaded at 0x83e00000 */
>> +
>> +		ipa_fw_mem: memory@8be00000 {
>> +			no-map;
>> +			reg = <0x0 0x8be00000 0x0 0x10000>;
>> +		};
>> +
>> +		ipa_gsi_mem: memory@8be10000 {
>> +			no-map;
>> +			reg = <0x0 0x8be10000 0x0 0x14000>;
>> +		};
>> +
>> +		mpss_mem: memory@8c000000 {
>> +			no-map;
>> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
>> +		};
>> +
>> +		q6_mpss_dtb_mem: memory@9ec00000 {
>> +			no-map;
>> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
>> +		};
>> +
>> +		tenx_mem: memory@a0000000 {
>> +			no-map;
>> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
>> +		};
>> +
>> +		oem_tenx_mem: memory@b9600000 {
>> +			no-map;
>> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
>> +		};
>> +
>> +		tenx_q6_buffer_mem: memory@c0000000 {
>> +			no-map;
>> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
>> +		};
>> +
>> +		ipa_buffer_mem: memory@c3200000 {
>> +			no-map;
>> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
>> +		};
>> +	};
>> +
>> +	soc: soc@0 {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges = <0 0 0 0 0x10 0>;
>> +		dma-ranges = <0 0 0 0 0x10 0>;
>> +		compatible = "simple-bus";
>> +
>> +		gcc: clock-controller@80000 {
>> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
>> +			reg = <0x0 0x80000 0x0 0x1f4200>;
>> +			#clock-cells = <1>;
>> +			#reset-cells = <1>;
>> +			#power-domain-cells = <1>;
>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
>> +			clock-names = "bi_tcxo", "sleep_clk";
>> +		};
>> +
>> +		gpi_dma0: dma-controller@900000  {
>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>> +			#dma-cells = <5>;
>> +			reg = <0x0 0x900000 0x0 0x60000>;
>> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
>> +			dma-channels = <12>;
>> +			dma-channel-mask = <0x3f>;
>> +			iommus = <&apps_smmu 0xf6 0x0>;
>> +			status = "ok";
> Drop it everywhere. It's by default.
Ack.
>
>> +		};
>> +
>> +		qupv3_id_0: geniqup@9c0000 {
>> +			compatible = "qcom,geni-se-qup";
>> +			reg = <0x0 0x9c0000 0x0 0x2000>;
>> +			clock-names = "m-ahb", "s-ahb";
>> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>> +			iommus = <&apps_smmu 0xe3 0x0>;
>> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
>> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
>> +			interconnect-names = "qup-core";
>> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
>> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
>> +			qcom,iommu-dma = "fastmap";
>> +			dma-coherent;
>> +
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges;
>> +			status = "disabled";
>> +
>> +			uart0: serial@980000 {
>> +				compatible = "qcom,geni-uart";
>> +				reg = <0x0 0x980000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart0_default>;
>> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c1: i2c@984000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x984000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c1_data_clk>;
>> +				dmas = <&gpi_dma0 0 1 3 64 0>,
>> +					<&gpi_dma0 1 1 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi1: spi@984000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x984000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
>> +				dmas = <&gpi_dma0 0 1 1 64 0>,
>> +					<&gpi_dma0 1 1 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c2: i2c@988000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x988000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c2_data_clk>;
>> +				dmas = <&gpi_dma0 0 2 3 64 0>,
>> +					<&gpi_dma0 1 2 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi2: spi@988000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x988000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
>> +				dmas = <&gpi_dma0 0 2 1 64 0>,
>> +					<&gpi_dma0 1 2 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c3: i2c@98c000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c3_data_clk>;
>> +				dmas = <&gpi_dma0 0 3 3 64 0>,
>> +					<&gpi_dma0 1 3 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi3: spi@98c000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
>> +				dmas = <&gpi_dma0 0 3 1 64 0>,
>> +					<&gpi_dma0 1 3 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c4: i2c@990000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x990000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c4_data_clk>;
>> +				dmas = <&gpi_dma0 0 4 3 64 0>,
>> +					<&gpi_dma0 1 4 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi4: spi@990000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x990000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
>> +				dmas = <&gpi_dma0 0 4 1 64 0>,
>> +					<&gpi_dma0 1 4 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c5: i2c@994000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x994000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c5_data_clk>;
>> +				dmas = <&gpi_dma0 0 5 3 64 0>,
>> +					<&gpi_dma0 1 5 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi5: spi@994000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x994000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
>> +				dmas = <&gpi_dma0 0 5 1 64 0>,
>> +					<&gpi_dma0 1 5 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c6: i2c@998000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x998000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c6_data_clk>;
>> +				dmas = <&gpi_dma0 0 6 3 64 0>,
>> +					<&gpi_dma0 1 6 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi6: spi@998000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x998000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
>> +				dmas = <&gpi_dma0 0 6 1 64 0>,
>> +					<&gpi_dma0 1 6 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			uart7: serial@99c000 {
>> +				compatible = "qcom,geni-debug-uart";
>> +				reg = <0x0 0x99c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
>> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +		};
>> +
>> +		gpi_dma1: dma-controller@a00000  {
>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>> +			#dma-cells = <5>;
>> +			reg = <0x0 0xa00000 0x0 0x60000>;
>> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
>> +			dma-channels = <12>;
>> +			dma-channel-mask = <0x3f>;
>> +			iommus = <&apps_smmu 0x116 0x0>;
>> +			status = "ok";
> And here
Ack.
>> +		};
>> +
>> +		qupv3_id_1: geniqup@ac0000 {
>> +			compatible = "qcom,geni-se-qup";
>> +			reg = <0x0 0xac0000 0x0 0x2000>;
>> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
>> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
>> +			iommus = <&apps_smmu 0x103 0x0>;
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +			clock-names = "m-ahb", "s-ahb";
> clock-names *always* follow clocks
Got it.
>
>> +
>> +			ranges;
>> +			status = "disabled";
>> +
>> +			uart8: serial@a80000 {
>> +				compatible = "qcom,geni-uart";
>> +				reg = <0x0 0xa80000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart8_default>;
>> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c9: i2c@a84000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c9_data_clk>;
>> +				dmas = <&gpi_dma1 0 1 3 64 0>,
>> +					<&gpi_dma1 1 1 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi9: spi@a84000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
>> +				dmas = <&gpi_dma1 0 1 1 64 0>,
>> +					<&gpi_dma1 1 1 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c10: i2c@a88000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c10_data_clk>;
>> +				dmas = <&gpi_dma1 0 2 3 64 0>,
>> +					<&gpi_dma1 1 2 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi10: spi@a88000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
>> +				dmas = <&gpi_dma1 0 2 1 64 0>,
>> +					<&gpi_dma1 1 2 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c11: i2c@a8c000 {
>> +				compatible = "qcom,i2c-geni";
>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c11_data_clk>;
>> +				dmas = <&gpi_dma1 0 3 3 64 0>,
>> +					<&gpi_dma1 1 3 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi11: spi@a8c000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
>> +				dmas = <&gpi_dma1 0 3 1 64 0>,
>> +					<&gpi_dma1 1 3 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c12: i2c@a90000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c12_data_clk>;
>> +				dmas = <&gpi_dma1 0 4 3 64 0>,
>> +					<&gpi_dma1 1 4 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi12: spi@a90000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
>> +				dmas = <&gpi_dma1 0 4 1 64 0>,
>> +					<&gpi_dma1 1 4 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c13: i2c@a94000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c13_data_clk>;
>> +				dmas = <&gpi_dma1 0 5 3 64 0>,
>> +					<&gpi_dma1 1 5 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			uart13: serial@a94000 {
>> +				compatible = "qcom,geni-uart";
>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart13_default>;
>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi13: spi@a94000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
>> +				dmas = <&gpi_dma1 0 5 1 64 0>,
>> +					<&gpi_dma1 1 5 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c14: i2c@a98000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c14_data_clk>;
>> +				dmas = <&gpi_dma1 0 6 3 64 0>,
>> +					<&gpi_dma1 1 6 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi14: spi@a98000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
>> +				dmas = <&gpi_dma1 0 6 1 64 0>,
>> +					<&gpi_dma1 1 6 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c15: i2c@a9c000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c15_data_clk>;
>> +				dmas = <&gpi_dma1 0 7 3 64 0>,
>> +					<&gpi_dma1 1 7 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi15: spi@a9c000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
>> +				dmas = <&gpi_dma1 0 7 1 64 0>,
>> +					<&gpi_dma1 1 7 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +		};
>> +
>> +		system_noc: interconnect@1640000 {
>> +			reg = <0x0 0x1640000 0x0 0x45080>;
>> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
>> +			#interconnect-cells = <1>;
>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>> +		};
>> +
>> +		tcsr_mutex: hwlock@1f40000 {
>> +			compatible = "qcom,tcsr-mutex";
>> +			reg = <0x0 0x1f40000 0x0 0x20000>;
>> +			#hwlock-cells = <1>;
>> +		};
>> +
>> +		pdc: interrupt-controller@b220000 {
>> +			compatible = "qcom,pdc";
>> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
>> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
>> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
>> +					  <94 609 31>, <125 63 1>;
>> +			#interrupt-cells = <2>;
>> +			interrupt-parent = <&intc>;
>> +			interrupt-controller;
>> +		};
>> +
>> +		spmi_bus: spmi@c400000 {
>> +			compatible = "qcom,spmi-pmic-arb";
>> +			reg = <0x0 0xc400000 0x0 0x3000>,
>> +			      <0x0 0xc500000 0x0 0x400000>,
>> +			      <0x0 0xc440000 0x0 0x80000>,
>> +			      <0x0 0xc4c0000 0x0 0x10000>,
>> +			      <0x0 0xc42d000 0x0 0x4000>;
>> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>> +			interrupt-names = "periph_irq";
>> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>> +			qcom,ee = <0>;
>> +			qcom,channel = <0>;
>> +			#address-cells = <2>;
>> +			#size-cells = <0>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <4>;
>> +		};
>> +
>> +		tlmm: pinctrl@f000000 {
>> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
>> +			reg = <0x0 0xf000000 0x0 0x1000000>;
>> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +			gpio-ranges = <&tlmm 0 0 151>;
>> +			wakeup-parent = <&pdc>;
>> +
>> +			qup_uart0_default: qup-uart0-default-state {
>> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
>> +				function = "qup00";
>> +			};
>> +
>> +			qup_i2c1_data_clk: qup-i2c1-data-clk {
> -state suffix
Didn't realize this was for all pins. Will correct.
> This is a friendly reminder during the review process.
>
> It seems my previous comments were not fully addressed. Maybe my
> feedback got lost between the quotes, maybe you just forgot to apply it.
> Please go back to the previous discussion and either implement all
> requested changes or keep discussing them.
>
> Thank you.
>
>> +				pins = "gpio10", "gpio11";
>> +				function = "qup01";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi1_data_clk: qup-spi1-data-clk {> +				pins = "gpio10", "gpio11", "gpio12";
>> +				function = "qup01";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi1_cs: qup-spi1-cs {
>> +				pins = "gpio13";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
>> +				pins = "gpio12", "gpio13";
>> +				function = "qup02";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi2_data_clk: qup-spi2-data-clk {
>> +				pins = "gpio12", "gpio13", "gpio10";
>> +				function = "qup02";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi2_cs: qup-spi2-cs {
>> +				pins = "gpio11";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
>> +				pins = "gpio14", "gpio15";
>> +				function = "qup03";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi3_data_clk: qup-spi3-data-clk {
>> +				pins = "gpio14", "gpio15", "gpio16";
>> +				function = "qup03";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi3_cs: qup-spi3-cs {
>> +				pins = "gpio17";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
>> +				pins = "gpio16", "gpio17";
>> +				function = "qup04";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi4_data_clk: qup-spi4-data-clk {
>> +				pins = "gpio16", "gpio17", "gpio14";
>> +				function = "qup04";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi4_cs: qup-spi4-cs {
>> +				pins = "gpio15";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
>> +				pins = "gpio130", "gpio131";
>> +				function = "qup05";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi5_data_clk: qup-spi5-data-clk {
>> +				pins = "gpio130", "gpio131", "gpio132";
>> +				function = "qup05";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi5_cs: qup-spi5-cs {
>> +				pins = "gpio133";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
>> +				pins = "gpio132", "gpio133";
>> +				function = "qup06";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi6_data_clk: qup-spi6-data-clk {
>> +				pins = "gpio132", "gpio133", "gpio130";
>> +				function = "qup06";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi6_cs: qup-spi6-cs {
>> +				pins = "gpio131";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart7_rx: qup-uart7-rx {
>> +				pins = "gpio135";
>> +				function = "qup07";
>> +				drive-strength = <2>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart7_tx: qup-uart7-tx  {
>> +				pins = "gpio134";
>> +				function = "qup07";
>> +				drive-strength = <2>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart8_default: qup-uart8-default {
>> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
>> +				function = "qup10";
>> +			};
>> +
>> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
>> +				pins = "gpio22", "gpio23";
>> +				function = "qup11";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi9_data_clk: qup-spi9-data-clk {
>> +				pins = "gpio22", "gpio23", "gpio24";
>> +				function = "qup11";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi9_cs: qup-spi9-cs {
>> +				pins = "gpio25";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
>> +				pins = "gpio24", "gpio25";
>> +				function = "qup12";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi10_data_clk: qup-spi10-data-clk {
>> +				pins = "gpio24", "gpio25", "gpio22";
>> +				function = "qup12";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi10_cs: qup-spi10-cs {
>> +				pins = "gpio23";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
>> +				pins = "gpio26", "gpio27";
>> +				function = "qup13";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi11_data_clk: qup-spi11-data-clk {
>> +				pins = "gpio26", "gpio27", "gpio28";
>> +				function = "qup13";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi11_cs: qup-spi11-cs {
>> +				pins = "gpio29";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
>> +				pins = "gpio28", "gpio29";
>> +				function = "qup14";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi12_data_clk: qup-spi12-data-clk {
>> +				pins = "gpio28", "gpio29", "gpio26";
>> +				function = "qup14";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi12_cs: qup-spi12-cs {
>> +				pins = "gpio27";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
>> +				pins = "gpio30", "gpio31";
>> +				function = "qup15";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi13_data_clk: qup-spi13-data-clk {
>> +				pins = "gpio30", "gpio31", "gpio32";
>> +				function = "qup15";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi13_cs: qup-spi13-cs {
>> +				pins = "gpio33";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart13_default: qup-uart13-default {
>> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
>> +				function = "qup15";
>> +			};
>> +
>> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
>> +				pins = "gpio34", "gpio35";
>> +				function = "qup16";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi14_data_clk: qup-spi14-data-clk {
>> +				pins = "gpio34", "gpio35", "gpio36";
>> +				function = "qup16";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi14_cs: qup-spi14-cs {
>> +				pins = "gpio37", "gpio38";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
>> +				pins = "gpio40", "gpio41";
>> +				function = "qup17";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi15_data_clk: qup-spi15-data-clk {
>> +				pins = "gpio40", "gpio41", "gpio30";
>> +				function = "qup17";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi15_cs: qup-spi15-cs {
>> +				pins = "gpio31";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +		};
>> +
>> +		apps_smmu: apps-smmu@15000000 {
>> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
>> +				"arm,mmu-500";
>> +			reg = <0x0 0x15000000 0x0 0x100000>;
>> +			#iommu-cells = <2>;
>> +			#global-interrupts = <2>;
>> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
>> +		};
>> +
>> +		intc: interrupt-controller@17200000 {
>> +			compatible = "arm,gic-v3";
>> +			#interrupt-cells = <3>;
>> +			interrupt-controller;
>> +			#redistributor-regions = <1>;
>> +			redistributor-stride = <0x0 0x20000>;
>> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
>> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
>> +		};
>> +
>> +		timer@17420000 {
>> +			compatible = "arm,armv7-timer-mem";
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges;
>> +			reg = <0x0 0x17420000 0x0 0x1000>;
>> +			clock-frequency = <19200000>;
>> +
>> +			frame@17421000 {
>> +				frame-number = <0>;
>> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17421000 0x0 0x1000>,
>> +				      <0x0 0x17422000 0x0 0x1000>;
>> +			};
>> +
>> +			frame@17423000 {
>> +				frame-number = <1>;
>> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17423000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@17425000 {
>> +				frame-number = <2>;
>> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17425000 0x0 0x1000>,
>> +				      <0x0 0x17426000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@17427000 {
>> +				frame-number = <3>;
>> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17427000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@17429000 {
>> +				frame-number = <4>;
>> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17429000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@1742b000 {
>> +				frame-number = <5>;
>> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x1742b000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@1742d000 {
>> +				frame-number = <6>;
>> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x1742d000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +		};
>> +
>> +		apps_rsc: rsc@17a00000 {
>> +			label = "apps_rsc";
>> +			compatible = "qcom,rpmh-rsc";
> compatible, then reg, then the rest.
Sure.
>
>> +			reg = <0x0 0x17a00000 0x0 0x10000>,
>> +			      <0x0 0x17a10000 0x0 0x10000>,
>> +			      <0x0 0x17a20000 0x0 0x10000>;
>> +			reg-names = "drv-0", "drv-1", "drv-2";
>> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>> +			qcom,tcs-offset = <0xd00>;
>> +			qcom,drv-id = <2>;
>> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
>> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
>> +
>> +			apps_bcm_voter: bcm_voter {
> Eh...
>
> Does not look like you tested the DTS against bindings. Please run `make
> dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
> for instructions).
Will do.
>
>> +				compatible = "qcom,bcm-voter";
>> +			};
>
>
>
> Best regards,
> Krzysztof
>
Thanks,
Melody

Krzysztof Kozlowski Oct. 20, 2022, 12:41 p.m. UTC | #6

On 19/10/2022 16:21, Melody Olvera wrote:
> 
> 
> On 10/15/2022 6:28 AM, Krzysztof Kozlowski wrote:
>> On 14/10/2022 18:11, Melody Olvera wrote:
>>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>>> to boot to shell with console on these SoCs.
>>>
>>> Signed-off-by: Melody Olvera <[e-mail]>
>>> ---
>>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>>  2 files changed, 1673 insertions(+)
>>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>> new file mode 100644
>>> index 000000000000..777734b30f56
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>> @@ -0,0 +1,1646 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>>> +#include <dt-bindings/clock/qcom,rpmh.h>
>>> +#include <dt-bindings/dma/qcom-gpi.h>
>>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>>> +#include <dt-bindings/power/qcom-rpmpd.h>
>>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>> +
>>> +/ {
>>> +	interrupt-parent = <&intc>;
>>> +
>>> +	#address-cells = <2>;
>>> +	#size-cells = <2>;
>>> +
>>> +	chosen: chosen { };
>>> +
>>> +	clocks {
>>> +		xo_board: xo-board {
>>> +			compatible = "fixed-clock";
>>> +			clock-frequency = <19200000>;
>> Both clocks are not a property of a SoC. They are provided by the board,
>> so they should either be defined by board DTS or at least their
>> frequency must be provided by the board.
> That doesn't seem in keeping with precedent.... the sm8* series all have the clocks in
> the dtsi. These are common to the boards anyways.

Because people do not pay attention what is part of SoC, what is part of
board. DTSI is for the SoC and these are inputs to the SoC.

We had these talks and my recommendation is the same.

Best regards,
Krzysztof

Stephan Gerhold Oct. 20, 2022, 1:54 p.m. UTC | #7

On Thu, Oct 20, 2022 at 08:41:15AM -0400, Krzysztof Kozlowski wrote:
> On 19/10/2022 16:21, Melody Olvera wrote:
> > On 10/15/2022 6:28 AM, Krzysztof Kozlowski wrote:
> >> On 14/10/2022 18:11, Melody Olvera wrote:
> >> [...]
> >>> +	clocks {
> >>> +		xo_board: xo-board {
> >>> +			compatible = "fixed-clock";
> >>> +			clock-frequency = <19200000>;
> >> Both clocks are not a property of a SoC. They are provided by the board,
> >> so they should either be defined by board DTS or at least their
> >> frequency must be provided by the board.
> > That doesn't seem in keeping with precedent.... the sm8* series all have the clocks in
> > the dtsi. These are common to the boards anyways.
> 
> Because people do not pay attention what is part of SoC, what is part of
> board. DTSI is for the SoC and these are inputs to the SoC.
> 

(Just chiming in because I had this thought already a few times when you
 suggested moving the XO "clock-frequency" to the board DTS:)

I understand your reasoning for moving components of the board to the
board DTS, but IMHO adding just the clock-frequency to the board DTS is
even more misleading: It suggests that there are functional board
designs where you would use a XO clock with a different clock-frequency.
Is that really realistic though?

There are assumptions about the XO clock frequency in a lot of places:
You would need to fully rewrite the gcc-<SoC>.c driver because it has
fixed multipliers/dividers for one specific XO frequency. All firmware
binaries would likely need changes. And does the hardware even support a
different XO clock frequency? The APQ8016E datasheet for example
strictly documents a XO clock input of 19.2 MHz and a sleep clock of
32.768 kHz.

IMHO the only realistic variation of the XO clock setup would be to have
a physical "fixed-clock" with a higher frequency, followed by a
"fixed-factor-clock" that brings it back to the expected frequency. To
model that properly it is not enough to have just the "clock-frequency"
in the board DTS. In this case you need two clock nodes, and the
xo_board would be the "fixed-factor-clock".

Therefore it should be all or nothing IMO: Either we move the full
xo-board node to the board DTS (which allows alternatively defining the
"fixed-factor-clock" or whatever). Or we assume that there will be
always an input clock signal with the fixed frequency and keep it fully
in the SoC .dtsi.

Having just the "clock-frequency" in the board DTS puts the attention on
the wrong detail, IMO. :)

Thanks,
Stephan

Krzysztof Kozlowski Oct. 20, 2022, 4:08 p.m. UTC | #8

On 20/10/2022 09:54, Stephan Gerhold wrote:
> On Thu, Oct 20, 2022 at 08:41:15AM -0400, Krzysztof Kozlowski wrote:
>> On 19/10/2022 16:21, Melody Olvera wrote:
>>> On 10/15/2022 6:28 AM, Krzysztof Kozlowski wrote:
>>>> On 14/10/2022 18:11, Melody Olvera wrote:
>>>> [...]
>>>>> +	clocks {
>>>>> +		xo_board: xo-board {
>>>>> +			compatible = "fixed-clock";
>>>>> +			clock-frequency = <19200000>;
>>>> Both clocks are not a property of a SoC. They are provided by the board,
>>>> so they should either be defined by board DTS or at least their
>>>> frequency must be provided by the board.
>>> That doesn't seem in keeping with precedent.... the sm8* series all have the clocks in
>>> the dtsi. These are common to the boards anyways.
>>
>> Because people do not pay attention what is part of SoC, what is part of
>> board. DTSI is for the SoC and these are inputs to the SoC.
>>
> 
> (Just chiming in because I had this thought already a few times when you
>  suggested moving the XO "clock-frequency" to the board DTS:)
> 
> I understand your reasoning for moving components of the board to the
> board DTS, but IMHO adding just the clock-frequency to the board DTS is
> even more misleading: It suggests that there are functional board
> designs where you would use a XO clock with a different clock-frequency.
> Is that really realistic though?

Keeping it in DTSI also suggests you could have some different frequency.

> 
> There are assumptions about the XO clock frequency in a lot of places:
> You would need to fully rewrite the gcc-<SoC>.c driver because it has
> fixed multipliers/dividers for one specific XO frequency. All firmware
> binaries would likely need changes. And does the hardware even support a
> different XO clock frequency? The APQ8016E datasheet for example
> strictly documents a XO clock input of 19.2 MHz and a sleep clock of
> 32.768 kHz.

I know, the same with most of other platforms. Qualcomm is not special
here. Maybe the difference is that some other platforms have few
external clocks and not all of them are required.

> IMHO the only realistic variation of the XO clock setup would be to have
> a physical "fixed-clock" with a higher frequency, followed by a
> "fixed-factor-clock" that brings it back to the expected frequency. To
> model that properly it is not enough to have just the "clock-frequency"
> in the board DTS. In this case you need two clock nodes, and the
> xo_board would be the "fixed-factor-clock".

It's not about whether you can change it or not. It's about describing
hardware - SoC DTSI describes SoC. DTS describes the board (assuming
there is no SoM or other DTSI files). This clock is not in DTSI.

> Therefore it should be all or nothing IMO: Either we move the full
> xo-board node to the board DTS (which allows alternatively defining the
> "fixed-factor-clock" or whatever).

You can move entire clock to boards.

> Or we assume that there will be
> always an input clock signal with the fixed frequency and keep it fully
> in the SoC .dtsi.
> 
> Having just the "clock-frequency" in the board DTS puts the attention on
> the wrong detail, IMO. :)

No, it puts attention to the board designer that he needs to provide the
clock in his design.

We had such talks about other platforms, although I do not have any
recent bookmarks. Something older:

https://lore.kernel.org/all/3382034.5ADO0F7naY@wuerfel/

https://lore.kernel.org/linux-samsung-soc/[e-mail]/

Best regards,
Krzysztof

Krzysztof Kozlowski Oct. 20, 2022, 4:26 p.m. UTC | #9

On 20/10/2022 12:08, Krzysztof Kozlowski wrote:
> On 20/10/2022 09:54, Stephan Gerhold wrote:
>> On Thu, Oct 20, 2022 at 08:41:15AM -0400, Krzysztof Kozlowski wrote:
>>> On 19/10/2022 16:21, Melody Olvera wrote:
>>>> On 10/15/2022 6:28 AM, Krzysztof Kozlowski wrote:
>>>>> On 14/10/2022 18:11, Melody Olvera wrote:
>>>>> [...]
>>>>>> +	clocks {
>>>>>> +		xo_board: xo-board {
>>>>>> +			compatible = "fixed-clock";
>>>>>> +			clock-frequency = <19200000>;
>>>>> Both clocks are not a property of a SoC. They are provided by the board,
>>>>> so they should either be defined by board DTS or at least their
>>>>> frequency must be provided by the board.
>>>> That doesn't seem in keeping with precedent.... the sm8* series all have the clocks in
>>>> the dtsi. These are common to the boards anyways.
>>>
>>> Because people do not pay attention what is part of SoC, what is part of
>>> board. DTSI is for the SoC and these are inputs to the SoC.
>>>
>>
>> (Just chiming in because I had this thought already a few times when you
>>  suggested moving the XO "clock-frequency" to the board DTS:)
>>
>> I understand your reasoning for moving components of the board to the
>> board DTS, but IMHO adding just the clock-frequency to the board DTS is
>> even more misleading: It suggests that there are functional board
>> designs where you would use a XO clock with a different clock-frequency.
>> Is that really realistic though?
> 
> Keeping it in DTSI also suggests you could have some different frequency.
> 
>>
>> There are assumptions about the XO clock frequency in a lot of places:
>> You would need to fully rewrite the gcc-<SoC>.c driver because it has
>> fixed multipliers/dividers for one specific XO frequency. All firmware
>> binaries would likely need changes. And does the hardware even support a
>> different XO clock frequency? The APQ8016E datasheet for example
>> strictly documents a XO clock input of 19.2 MHz and a sleep clock of
>> 32.768 kHz.
> 
> I know, the same with most of other platforms. Qualcomm is not special
> here. Maybe the difference is that some other platforms have few
> external clocks and not all of them are required.
> 
>> IMHO the only realistic variation of the XO clock setup would be to have
>> a physical "fixed-clock" with a higher frequency, followed by a
>> "fixed-factor-clock" that brings it back to the expected frequency. To
>> model that properly it is not enough to have just the "clock-frequency"
>> in the board DTS. In this case you need two clock nodes, and the
>> xo_board would be the "fixed-factor-clock".
> 
> It's not about whether you can change it or not. It's about describing
> hardware - SoC DTSI describes SoC. DTS describes the board (assuming
> there is no SoM or other DTSI files). This clock is not in DTSI.
> 
>> Therefore it should be all or nothing IMO: Either we move the full
>> xo-board node to the board DTS (which allows alternatively defining the
>> "fixed-factor-clock" or whatever).
> 
> You can move entire clock to boards.
> 
>> Or we assume that there will be
>> always an input clock signal with the fixed frequency and keep it fully
>> in the SoC .dtsi.
>>
>> Having just the "clock-frequency" in the board DTS puts the attention on
>> the wrong detail, IMO. :)
> 
> No, it puts attention to the board designer that he needs to provide the
> clock in his design.
> 

Another solution which would satisfy me, would be to put these clocks to
a dedicated, re-usable DTSI and include that DTSI in each board DTS.

Best regards,
Krzysztof

Stephan Gerhold Oct. 20, 2022, 5:18 p.m. UTC | #10

On Thu, Oct 20, 2022 at 12:08:36PM -0400, Krzysztof Kozlowski wrote:
> On 20/10/2022 09:54, Stephan Gerhold wrote:
> > On Thu, Oct 20, 2022 at 08:41:15AM -0400, Krzysztof Kozlowski wrote:
> >> On 19/10/2022 16:21, Melody Olvera wrote:
> >>> On 10/15/2022 6:28 AM, Krzysztof Kozlowski wrote:
> >>>> On 14/10/2022 18:11, Melody Olvera wrote:
> >>>> [...]
> >>>>> +	clocks {
> >>>>> +		xo_board: xo-board {
> >>>>> +			compatible = "fixed-clock";
> >>>>> +			clock-frequency = <19200000>;
> >>>> Both clocks are not a property of a SoC. They are provided by the board,
> >>>> so they should either be defined by board DTS or at least their
> >>>> frequency must be provided by the board.
> >>> That doesn't seem in keeping with precedent.... the sm8* series all have the clocks in
> >>> the dtsi. These are common to the boards anyways.
> >>
> >> Because people do not pay attention what is part of SoC, what is part of
> >> board. DTSI is for the SoC and these are inputs to the SoC.
> >>
> > 
> > (Just chiming in because I had this thought already a few times when you
> >  suggested moving the XO "clock-frequency" to the board DTS:)
> > 
> > I understand your reasoning for moving components of the board to the
> > board DTS, but IMHO adding just the clock-frequency to the board DTS is
> > even more misleading: It suggests that there are functional board
> > designs where you would use a XO clock with a different clock-frequency.
> > Is that really realistic though?
> 
> Keeping it in DTSI also suggests you could have some different frequency.
> 

If the fixed-clock was listed in the SoC DTSI I would personally
consider it as fixed and would not try to modify it in the board DTS.
The way I see it is that the board DTS mostly _extends_ the SoC DTSI
(add peripherals/supplies/...) instead of _modifying_ it.

Anyway this is likely subjective and was not my main point/question. :)

> > 
> > There are assumptions about the XO clock frequency in a lot of places:
> > You would need to fully rewrite the gcc-<SoC>.c driver because it has
> > fixed multipliers/dividers for one specific XO frequency. All firmware
> > binaries would likely need changes. And does the hardware even support a
> > different XO clock frequency? The APQ8016E datasheet for example
> > strictly documents a XO clock input of 19.2 MHz and a sleep clock of
> > 32.768 kHz.
> 
> I know, the same with most of other platforms. Qualcomm is not special
> here. Maybe the difference is that some other platforms have few
> external clocks and not all of them are required.
> 
> > IMHO the only realistic variation of the XO clock setup would be to have
> > a physical "fixed-clock" with a higher frequency, followed by a
> > "fixed-factor-clock" that brings it back to the expected frequency. To
> > model that properly it is not enough to have just the "clock-frequency"
> > in the board DTS. In this case you need two clock nodes, and the
> > xo_board would be the "fixed-factor-clock".
> 
> It's not about whether you can change it or not. It's about describing
> hardware - SoC DTSI describes SoC. DTS describes the board (assuming
> there is no SoM or other DTSI files). This clock is not in DTSI.
> 
> > Therefore it should be all or nothing IMO: Either we move the full
> > xo-board node to the board DTS (which allows alternatively defining the
> > "fixed-factor-clock" or whatever).
> 
> You can move entire clock to boards.
> 
> > Or we assume that there will be
> > always an input clock signal with the fixed frequency and keep it fully
> > in the SoC .dtsi.
> > 
> > Having just the "clock-frequency" in the board DTS puts the attention on
> > the wrong detail, IMO. :)
> 
> No, it puts attention to the board designer that he needs to provide the
> clock in his design.
> 
> We had such talks about other platforms, although I do not have any
> recent bookmarks. Something older:
> 
> https://lore.kernel.org/all/3382034.5ADO0F7naY@wuerfel/
> 
> https://lore.kernel.org/linux-samsung-soc/[e-mail]/
> 

If I understand you correctly your argument for having the clock in the
board DTS instead of the SoC DTSI is:

The SoC DTSI describes the components of the SoC, while the board DTS
describes the components of the board (built around the SoC). The clock
is part of the board (and not the SoC) and therefore belongs into the
board DTS and not the SoC DTSI. Having the SoC/board components clearly
separated ensures people writing new board DTS pay attention to
everything board-specific.

Correct? This sounds reasonable to me.

However, the main question of my previous mail was: Why do you
alternatively recommend to keep the clock defined in the SoC DTSI and to
just put the clock-frequency into the board DTS? This sounds like a
contradiction of the above to me: the clock is still (partially)
described as part of the SoC, even though it belongs to the board.

Someone writing a board DTS should not just put attention to the
clock-frequency, but also if they have a single fixed-clock or
maybe some kind of clock-fixed-factor setup, as I wrote.

Thanks,
Stephan

Krzysztof Kozlowski Oct. 20, 2022, 5:59 p.m. UTC | #11

On 20/10/2022 13:18, Stephan Gerhold wrote:
>> No, it puts attention to the board designer that he needs to provide the
>> clock in his design.
>>
>> We had such talks about other platforms, although I do not have any
>> recent bookmarks. Something older:
>>
>> https://lore.kernel.org/all/3382034.5ADO0F7naY@wuerfel/
>>
>> https://lore.kernel.org/linux-samsung-soc/[e-mail]/
>>
> 
> If I understand you correctly your argument for having the clock in the
> board DTS instead of the SoC DTSI is:
> 
> The SoC DTSI describes the components of the SoC, while the board DTS
> describes the components of the board (built around the SoC). The clock
> is part of the board (and not the SoC) and therefore belongs into the
> board DTS and not the SoC DTSI. Having the SoC/board components clearly
> separated ensures people writing new board DTS pay attention to
> everything board-specific.
> 
> Correct? This sounds reasonable to me.

Yes.

> 
> However, the main question of my previous mail was: Why do you
> alternatively recommend to keep the clock defined in the SoC DTSI and to
> just put the clock-frequency into the board DTS? This sounds like a
> contradiction of the above to me: the clock is still (partially)
> described as part of the SoC, even though it belongs to the board.

The proposal is a trade-off, compromise between code duplication and
above recommendation of splitting SoC <-> board.

As you said, all boards will provide this clock, so it is reasonable to
put some pieces of it in the SoC DTSI to avoid duplication. But the
final piece - what clock is there exactly (model, frequency etc) should
be put in board DTS to clarify that this comes with board.

> Someone writing a board DTS should not just put attention to the
> clock-frequency, but also if they have a single fixed-clock or
> maybe some kind of clock-fixed-factor setup, as I wrote.

True. If such setup is probably, then my recommendation would be to put
entire clock to the board.

Just note, that even in proposed frequency->board DTS, it is still
possible to use the clock-fixed-factor.

Best regards,
Krzysztof

Melody Olvera Oct. 20, 2022, 6:55 p.m. UTC | #12

On 10/20/2022 10:59 AM, Krzysztof Kozlowski wrote:
> On 20/10/2022 13:18, Stephan Gerhold wrote:
>>> No, it puts attention to the board designer that he needs to provide the
>>> clock in his design.
>>>
>>> We had such talks about other platforms, although I do not have any
>>> recent bookmarks. Something older:
>>>
>>> https://lore.kernel.org/all/3382034.5ADO0F7naY@wuerfel/
>>>
>>> https://lore.kernel.org/linux-samsung-soc/[e-mail]/
>>>
>> If I understand you correctly your argument for having the clock in the
>> board DTS instead of the SoC DTSI is:
>>
>> The SoC DTSI describes the components of the SoC, while the board DTS
>> describes the components of the board (built around the SoC). The clock
>> is part of the board (and not the SoC) and therefore belongs into the
>> board DTS and not the SoC DTSI. Having the SoC/board components clearly
>> separated ensures people writing new board DTS pay attention to
>> everything board-specific.
>>
>> Correct? This sounds reasonable to me.
> Yes.
>
>> However, the main question of my previous mail was: Why do you
>> alternatively recommend to keep the clock defined in the SoC DTSI and to
>> just put the clock-frequency into the board DTS? This sounds like a
>> contradiction of the above to me: the clock is still (partially)
>> described as part of the SoC, even though it belongs to the board.
> The proposal is a trade-off, compromise between code duplication and
> above recommendation of splitting SoC <-> board.
>
> As you said, all boards will provide this clock, so it is reasonable to
> put some pieces of it in the SoC DTSI to avoid duplication. But the
> final piece - what clock is there exactly (model, frequency etc) should
> be put in board DTS to clarify that this comes with board.
>
>> Someone writing a board DTS should not just put attention to the
>> clock-frequency, but also if they have a single fixed-clock or
>> maybe some kind of clock-fixed-factor setup, as I wrote.
> True. If such setup is probably, then my recommendation would be to put
> entire clock to the board.
Going through this thread, this seems to be the conclusion. Will all clock nodes to the
DTS files.
>
> Just note, that even in proposed frequency->board DTS, it is still
> possible to use the clock-fixed-factor.
>
>
Thanks,
Melody

Richard Acayan Oct. 24, 2022, 12:53 a.m. UTC | #13

> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
> to boot to shell with console on these SoCs.
> 
> Signed-off-by: Melody Olvera <[e-mail]>
> ---
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>  2 files changed, 1673 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> new file mode 100644
> index 000000000000..777734b30f56
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -0,0 +1,1646 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/dma/qcom-gpi.h>
> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +
> +/ {
> +	interrupt-parent = <&intc>;
> +
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	chosen: chosen { };
> +
> +	clocks {
> +		xo_board: xo-board {
> +			compatible = "fixed-clock";
> +			clock-frequency = <19200000>;
> +			clock-output-names = "xo_board";
> +			#clock-cells = <0>;
> +		};
> +
> +		sleep_clk: sleep-clk {
> +			compatible = "fixed-clock";
> +			clock-frequency = <32000>;
> +			#clock-cells = <0>;
> +		};
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		CPU0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			power-domain-names = "psci";
> +			power-domains = <&CPU_PD0>;
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_0>;
> +			L2_0: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +				L3_0: l3-cache {
> +					compatible = "cache";
> +				};
> +			};
> +		};
> +
> +		CPU1: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x100>;
> +			enable-method = "psci";
> +			power-domains = <&CPU_PD1>;
> +			power-domain-names = "psci";
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_100>;
> +			L2_100: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +
> +		};
> +
> +		CPU2: cpu@200 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x200>;
> +			enable-method = "psci";
> +			power-domains = <&CPU_PD2>;
> +			power-domain-names = "psci";
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_200>;
> +			L2_200: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU3: cpu@300 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x300>;
> +			enable-method = "psci";
> +			power-domains = <&CPU_PD3>;
> +			power-domain-names = "psci";
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_300>;
> +			L2_300: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +
> +		};
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&CPU0>;
> +				};
> +
> +				core1 {
> +					cpu = <&CPU1>;
> +				};
> +
> +				core2 {
> +					cpu = <&CPU2>;
> +				};
> +
> +				core3 {
> +					cpu = <&CPU3>;
> +				};
> +			};
> +		};
> +	};
> +
> +	idle-states {
> +		entry-method = "psci";
> +
> +		CPU_OFF: cpu-sleep-0 {
> +			compatible = "arm,idle-state";
> +			idle-state-name = "rail-pc";
> +			entry-latency-us = <274>;
> +			exit-latency-us = <480>;
> +			min-residency-us = <3934>;
> +			arm,psci-suspend-param = <0x40000004>;
> +			local-timer-stop;
> +		};
> +	};
> +
> +	domain-idle-states {
> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
> +			compatible = "domain-idle-state";
> +			idle-state-name = "cluster-l3-off";
> +			entry-latency-us = <584>;
> +			exit-latency-us = <2332>;
> +			min-residency-us = <6118>;
> +			arm,psci-suspend-param = <0x41000044>;
> +		};
> +
> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
> +			compatible = "domain-idle-state";
> +			idle-state-name = "cluster-power-collapse";
> +			entry-latency-us = <2893>;
> +			exit-latency-us = <4023>;
> +			min-residency-us = <9987>;
> +			arm,psci-suspend-param = <0x41003344>;
> +		};
> +	};
> +
> +	firmware {
> +		qcom_scm {
> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
> +			#reset-cells = <1>;
> +		};
> +	};
> +
> +	clk_virt: interconnect-0 {
> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
> +		#interconnect-cells = <2>;
> +		qcom,bcm-voters = <&apps_bcm_voter>;
> +	};
> +
> +	mc_virt: interconnect-1 {
> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
> +		#interconnect-cells = <2>;
> +		qcom,bcm-voters = <&apps_bcm_voter>;
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		/* We expect the bootloader to fill in the size */
> +		reg = <0x0 0x80000000 0x0 0x0>;
> +	};
> +
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +
> +		CPU_PD0: cpu-pd0 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CPU_PD1: cpu-pd1 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CPU_PD2: cpu-pd2 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CPU_PD3: cpu-pd3 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CLUSTER_PD: cluster-pd {
> +			#power-domain-cells = <0>;
> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
> +		};
> +	};
> +
> +	reserved_memory: reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		hyp_mem: memory@80000000 {
> +			no-map;
> +			reg = <0x0 0x80000000 0x0 0x600000>;
> +		};
> +
> +		xbl_dt_log_mem: memory@80600000 {
> +			no-map;
> +			reg = <0x0 0x80600000 0x0 0x40000>;
> +		};
> +
> +		xbl_ramdump_mem: memory@80640000 {
> +			no-map;
> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
> +		};
> +
> +		aop_image_mem: memory@80800000 {
> +			no-map;
> +			reg = <0x0 0x80800000 0x0 0x60000>;
> +		};
> +
> +		aop_cmd_db_mem: memory@80860000 {
> +			compatible = "qcom,cmd-db";
> +			no-map;
> +			reg = <0x0 0x80860000 0x0 0x20000>;
> +		};
> +
> +		aop_config_mem: memory@80880000 {
> +			no-map;
> +			reg = <0x0 0x80880000 0x0 0x20000>;
> +		};
> +
> +		tme_crash_dump_mem: memory@808a0000 {
> +			no-map;
> +			reg = <0x0 0x808a0000 0x0 0x40000>;
> +		};
> +
> +		tme_log_mem: memory@808e0000 {
> +			no-map;
> +			reg = <0x0 0x808e0000 0x0 0x4000>;
> +		};
> +
> +		uefi_log_mem: memory@808e4000 {
> +			no-map;
> +			reg = <0x0 0x808e4000 0x0 0x10000>;
> +		};
> +
> +		/* secdata region can be reused by apps */
> +
> +		smem_mem: memory@80900000 {
> +			compatible = "qcom,smem";
> +			no-map;
> +			reg = <0x0 0x80900000 0x0 0x200000>;
> +			hwlocks = <&tcsr_mutex 3>;
> +		};
> +
> +		cpucp_fw_mem: memory@80b00000 {
> +			no-map;
> +			reg = <0x0 0x80b00000 0x0 0x100000>;
> +		};
> +
> +		xbl_sc_mem: memory@80c00000 {
> +			no-map;
> +			reg = <0x0 0x80c00000 0x0 0x40000>;
> +		};
> +
> +		/* uefi region can be reused by apps */
> +
> +		tz_stat_mem: memory@81d00000 {
> +			no-map;
> +			reg = <0x0 0x81d00000 0x0 0x100000>;
> +		};
> +
> +		tags_mem: memory@81e00000 {
> +			no-map;
> +			reg = <0x0 0x81e00000 0x0 0x500000>;
> +		};
> +
> +		qtee_mem: memory@82300000 {
> +			no-map;
> +			reg = <0x0 0x82300000 0x0 0x500000>;
> +		};
> +
> +		ta_mem: memory@82800000 {
> +			no-map;
> +			reg = <0x0 0x82800000 0x0 0xa00000>;
> +		};
> +
> +		fs1_mem: memory@83200000 {
> +			no-map;
> +			reg = <0x0 0x83200000 0x0 0x400000>;
> +		};
> +
> +		fs2_mem: memory@83600000 {
> +			no-map;
> +			reg = <0x0 0x83600000 0x0 0x400000>;
> +		};
> +
> +		fs3_mem: memory@83a00000 {
> +			no-map;
> +			reg = <0x0 0x83a00000 0x0 0x400000>;
> +		};
> +
> +		/* Linux kernel image is loaded at 0x83e00000 */
> +
> +		ipa_fw_mem: memory@8be00000 {
> +			no-map;
> +			reg = <0x0 0x8be00000 0x0 0x10000>;
> +		};
> +
> +		ipa_gsi_mem: memory@8be10000 {
> +			no-map;
> +			reg = <0x0 0x8be10000 0x0 0x14000>;
> +		};
> +
> +		mpss_mem: memory@8c000000 {
> +			no-map;
> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
> +		};
> +
> +		q6_mpss_dtb_mem: memory@9ec00000 {
> +			no-map;
> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
> +		};
> +
> +		tenx_mem: memory@a0000000 {
> +			no-map;
> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
> +		};
> +
> +		oem_tenx_mem: memory@b9600000 {
> +			no-map;
> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
> +		};
> +
> +		tenx_q6_buffer_mem: memory@c0000000 {
> +			no-map;
> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
> +		};
> +
> +		ipa_buffer_mem: memory@c3200000 {
> +			no-map;
> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
> +		};
> +	};
> +
> +	soc: soc@0 {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges = <0 0 0 0 0x10 0>;
> +		dma-ranges = <0 0 0 0 0x10 0>;
> +		compatible = "simple-bus";
> +
> +		gcc: clock-controller@80000 {
> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
> +			reg = <0x0 0x80000 0x0 0x1f4200>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
> +			clock-names = "bi_tcxo", "sleep_clk";
> +		};
> +
> +		gpi_dma0: dma-controller@900000  {
> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";

This won't work if you drop series [1]. It won't just fail the schema checks,
but it would also fail to probe because the driver doesn't recognise it.

I think you were told to rebase on [2], and didn't change your own series
because it only applied to ee_offset = 0x0. There is another series [3] that
was sent to you, meant for ee_offset = 0x10000. You're expected to change your
patches (in both series you sent) based on what was changed in that series.

[1] https://lore.kernel.org/linux-arm-msm/[e-mail]/
[2] https://lore.kernel.org/linux-arm-msm/[e-mail]/T/
[3] https://lore.kernel.org/linux-arm-msm/[e-mail]/T/

> +			#dma-cells = <5>;
> +			reg = <0x0 0x900000 0x0 0x60000>;
> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> +			dma-channels = <12>;
> +			dma-channel-mask = <0x3f>;
> +			iommus = <&apps_smmu 0xf6 0x0>;
> +			status = "ok";
> +		};
> +
> +		qupv3_id_0: geniqup@9c0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x0 0x9c0000 0x0 0x2000>;
> +			clock-names = "m-ahb", "s-ahb";
> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> +			iommus = <&apps_smmu 0xe3 0x0>;
> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
> +			interconnect-names = "qup-core";
> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
> +			qcom,iommu-dma = "fastmap";
> +			dma-coherent;
> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			status = "disabled";
> +
> +			uart0: serial@980000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0x0 0x980000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart0_default>;
> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c1: i2c@984000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x984000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c1_data_clk>;
> +				dmas = <&gpi_dma0 0 1 3 64 0>,
> +					<&gpi_dma0 1 1 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi1: spi@984000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x984000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
> +				dmas = <&gpi_dma0 0 1 1 64 0>,
> +					<&gpi_dma0 1 1 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c2: i2c@988000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x988000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c2_data_clk>;
> +				dmas = <&gpi_dma0 0 2 3 64 0>,
> +					<&gpi_dma0 1 2 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi2: spi@988000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x988000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
> +				dmas = <&gpi_dma0 0 2 1 64 0>,
> +					<&gpi_dma0 1 2 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c3: i2c@98c000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x98c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c3_data_clk>;
> +				dmas = <&gpi_dma0 0 3 3 64 0>,
> +					<&gpi_dma0 1 3 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi3: spi@98c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x98c000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
> +				dmas = <&gpi_dma0 0 3 1 64 0>,
> +					<&gpi_dma0 1 3 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c4: i2c@990000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x990000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c4_data_clk>;
> +				dmas = <&gpi_dma0 0 4 3 64 0>,
> +					<&gpi_dma0 1 4 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi4: spi@990000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x990000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
> +				dmas = <&gpi_dma0 0 4 1 64 0>,
> +					<&gpi_dma0 1 4 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c5: i2c@994000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x994000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c5_data_clk>;
> +				dmas = <&gpi_dma0 0 5 3 64 0>,
> +					<&gpi_dma0 1 5 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi5: spi@994000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x994000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
> +				dmas = <&gpi_dma0 0 5 1 64 0>,
> +					<&gpi_dma0 1 5 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c6: i2c@998000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x998000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c6_data_clk>;
> +				dmas = <&gpi_dma0 0 6 3 64 0>,
> +					<&gpi_dma0 1 6 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi6: spi@998000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x998000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
> +				dmas = <&gpi_dma0 0 6 1 64 0>,
> +					<&gpi_dma0 1 6 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			uart7: serial@99c000 {
> +				compatible = "qcom,geni-debug-uart";
> +				reg = <0x0 0x99c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		gpi_dma1: dma-controller@a00000  {
> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";

See above.

> +			#dma-cells = <5>;
> +			reg = <0x0 0xa00000 0x0 0x60000>;
> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
> +			dma-channels = <12>;
> +			dma-channel-mask = <0x3f>;
> +			iommus = <&apps_smmu 0x116 0x0>;
> +			status = "ok";
> +		};
> +
> +		qupv3_id_1: geniqup@ac0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x0 0xac0000 0x0 0x2000>;
> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> +			iommus = <&apps_smmu 0x103 0x0>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			clock-names = "m-ahb", "s-ahb";
> +
> +			ranges;
> +			status = "disabled";
> +
> +			uart8: serial@a80000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0x0 0xa80000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart8_default>;
> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c9: i2c@a84000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa84000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c9_data_clk>;
> +				dmas = <&gpi_dma1 0 1 3 64 0>,
> +					<&gpi_dma1 1 1 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi9: spi@a84000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa84000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
> +				dmas = <&gpi_dma1 0 1 1 64 0>,
> +					<&gpi_dma1 1 1 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c10: i2c@a88000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa88000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c10_data_clk>;
> +				dmas = <&gpi_dma1 0 2 3 64 0>,
> +					<&gpi_dma1 1 2 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi10: spi@a88000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa88000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
> +				dmas = <&gpi_dma1 0 2 1 64 0>,
> +					<&gpi_dma1 1 2 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c11: i2c@a8c000 {
> +				compatible = "qcom,i2c-geni";
> +				reg = <0x0 0xa8c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c11_data_clk>;
> +				dmas = <&gpi_dma1 0 3 3 64 0>,
> +					<&gpi_dma1 1 3 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi11: spi@a8c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa8c000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
> +				dmas = <&gpi_dma1 0 3 1 64 0>,
> +					<&gpi_dma1 1 3 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c12: i2c@a90000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa90000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c12_data_clk>;
> +				dmas = <&gpi_dma1 0 4 3 64 0>,
> +					<&gpi_dma1 1 4 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi12: spi@a90000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa90000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
> +				dmas = <&gpi_dma1 0 4 1 64 0>,
> +					<&gpi_dma1 1 4 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c13: i2c@a94000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa94000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c13_data_clk>;
> +				dmas = <&gpi_dma1 0 5 3 64 0>,
> +					<&gpi_dma1 1 5 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			uart13: serial@a94000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0x0 0xa94000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart13_default>;
> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi13: spi@a94000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa94000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
> +				dmas = <&gpi_dma1 0 5 1 64 0>,
> +					<&gpi_dma1 1 5 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c14: i2c@a98000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa98000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c14_data_clk>;
> +				dmas = <&gpi_dma1 0 6 3 64 0>,
> +					<&gpi_dma1 1 6 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi14: spi@a98000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa98000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
> +				dmas = <&gpi_dma1 0 6 1 64 0>,
> +					<&gpi_dma1 1 6 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c15: i2c@a9c000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa9c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c15_data_clk>;
> +				dmas = <&gpi_dma1 0 7 3 64 0>,
> +					<&gpi_dma1 1 7 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi15: spi@a9c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa9c000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
> +				dmas = <&gpi_dma1 0 7 1 64 0>,
> +					<&gpi_dma1 1 7 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +		};
> +
> +		system_noc: interconnect@1640000 {
> +			reg = <0x0 0x1640000 0x0 0x45080>;
> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		tcsr_mutex: hwlock@1f40000 {
> +			compatible = "qcom,tcsr-mutex";
> +			reg = <0x0 0x1f40000 0x0 0x20000>;
> +			#hwlock-cells = <1>;
> +		};
> +
> +		pdc: interrupt-controller@b220000 {
> +			compatible = "qcom,pdc";
> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
> +					  <94 609 31>, <125 63 1>;
> +			#interrupt-cells = <2>;
> +			interrupt-parent = <&intc>;
> +			interrupt-controller;
> +		};
> +
> +		spmi_bus: spmi@c400000 {
> +			compatible = "qcom,spmi-pmic-arb";
> +			reg = <0x0 0xc400000 0x0 0x3000>,
> +			      <0x0 0xc500000 0x0 0x400000>,
> +			      <0x0 0xc440000 0x0 0x80000>,
> +			      <0x0 0xc4c0000 0x0 0x10000>,
> +			      <0x0 0xc42d000 0x0 0x4000>;
> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> +			interrupt-names = "periph_irq";
> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,ee = <0>;
> +			qcom,channel = <0>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +			interrupt-controller;
> +			#interrupt-cells = <4>;
> +		};
> +
> +		tlmm: pinctrl@f000000 {
> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
> +			reg = <0x0 0xf000000 0x0 0x1000000>;
> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			gpio-ranges = <&tlmm 0 0 151>;
> +			wakeup-parent = <&pdc>;
> +
> +			qup_uart0_default: qup-uart0-default-state {
> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
> +				function = "qup00";
> +			};
> +
> +			qup_i2c1_data_clk: qup-i2c1-data-clk {
> +				pins = "gpio10", "gpio11";
> +				function = "qup01";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi1_data_clk: qup-spi1-data-clk {
> +				pins = "gpio10", "gpio11", "gpio12";
> +				function = "qup01";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi1_cs: qup-spi1-cs {
> +				pins = "gpio13";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
> +				pins = "gpio12", "gpio13";
> +				function = "qup02";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi2_data_clk: qup-spi2-data-clk {
> +				pins = "gpio12", "gpio13", "gpio10";
> +				function = "qup02";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi2_cs: qup-spi2-cs {
> +				pins = "gpio11";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
> +				pins = "gpio14", "gpio15";
> +				function = "qup03";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi3_data_clk: qup-spi3-data-clk {
> +				pins = "gpio14", "gpio15", "gpio16";
> +				function = "qup03";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi3_cs: qup-spi3-cs {
> +				pins = "gpio17";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
> +				pins = "gpio16", "gpio17";
> +				function = "qup04";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi4_data_clk: qup-spi4-data-clk {
> +				pins = "gpio16", "gpio17", "gpio14";
> +				function = "qup04";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi4_cs: qup-spi4-cs {
> +				pins = "gpio15";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
> +				pins = "gpio130", "gpio131";
> +				function = "qup05";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi5_data_clk: qup-spi5-data-clk {
> +				pins = "gpio130", "gpio131", "gpio132";
> +				function = "qup05";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi5_cs: qup-spi5-cs {
> +				pins = "gpio133";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
> +				pins = "gpio132", "gpio133";
> +				function = "qup06";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi6_data_clk: qup-spi6-data-clk {
> +				pins = "gpio132", "gpio133", "gpio130";
> +				function = "qup06";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi6_cs: qup-spi6-cs {
> +				pins = "gpio131";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_uart7_rx: qup-uart7-rx {
> +				pins = "gpio135";
> +				function = "qup07";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			qup_uart7_tx: qup-uart7-tx  {
> +				pins = "gpio134";
> +				function = "qup07";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			qup_uart8_default: qup-uart8-default {
> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
> +				function = "qup10";
> +			};
> +
> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
> +				pins = "gpio22", "gpio23";
> +				function = "qup11";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi9_data_clk: qup-spi9-data-clk {
> +				pins = "gpio22", "gpio23", "gpio24";
> +				function = "qup11";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi9_cs: qup-spi9-cs {
> +				pins = "gpio25";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
> +				pins = "gpio24", "gpio25";
> +				function = "qup12";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi10_data_clk: qup-spi10-data-clk {
> +				pins = "gpio24", "gpio25", "gpio22";
> +				function = "qup12";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi10_cs: qup-spi10-cs {
> +				pins = "gpio23";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
> +				pins = "gpio26", "gpio27";
> +				function = "qup13";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi11_data_clk: qup-spi11-data-clk {
> +				pins = "gpio26", "gpio27", "gpio28";
> +				function = "qup13";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi11_cs: qup-spi11-cs {
> +				pins = "gpio29";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
> +				pins = "gpio28", "gpio29";
> +				function = "qup14";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi12_data_clk: qup-spi12-data-clk {
> +				pins = "gpio28", "gpio29", "gpio26";
> +				function = "qup14";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi12_cs: qup-spi12-cs {
> +				pins = "gpio27";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
> +				pins = "gpio30", "gpio31";
> +				function = "qup15";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi13_data_clk: qup-spi13-data-clk {
> +				pins = "gpio30", "gpio31", "gpio32";
> +				function = "qup15";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi13_cs: qup-spi13-cs {
> +				pins = "gpio33";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_uart13_default: qup-uart13-default {
> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
> +				function = "qup15";
> +			};
> +
> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
> +				pins = "gpio34", "gpio35";
> +				function = "qup16";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi14_data_clk: qup-spi14-data-clk {
> +				pins = "gpio34", "gpio35", "gpio36";
> +				function = "qup16";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi14_cs: qup-spi14-cs {
> +				pins = "gpio37", "gpio38";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
> +				pins = "gpio40", "gpio41";
> +				function = "qup17";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi15_data_clk: qup-spi15-data-clk {
> +				pins = "gpio40", "gpio41", "gpio30";
> +				function = "qup17";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi15_cs: qup-spi15-cs {
> +				pins = "gpio31";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +		};
> +
> +		apps_smmu: apps-smmu@15000000 {
> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
> +				"arm,mmu-500";
> +			reg = <0x0 0x15000000 0x0 0x100000>;
> +			#iommu-cells = <2>;
> +			#global-interrupts = <2>;
> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		intc: interrupt-controller@17200000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			#redistributor-regions = <1>;
> +			redistributor-stride = <0x0 0x20000>;
> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> +		};
> +
> +		timer@17420000 {
> +			compatible = "arm,armv7-timer-mem";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			reg = <0x0 0x17420000 0x0 0x1000>;
> +			clock-frequency = <19200000>;
> +
> +			frame@17421000 {
> +				frame-number = <0>;
> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17421000 0x0 0x1000>,
> +				      <0x0 0x17422000 0x0 0x1000>;
> +			};
> +
> +			frame@17423000 {
> +				frame-number = <1>;
> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17423000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17425000 {
> +				frame-number = <2>;
> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17425000 0x0 0x1000>,
> +				      <0x0 0x17426000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17427000 {
> +				frame-number = <3>;
> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17427000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17429000 {
> +				frame-number = <4>;
> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17429000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@1742b000 {
> +				frame-number = <5>;
> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x1742b000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@1742d000 {
> +				frame-number = <6>;
> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x1742d000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		apps_rsc: rsc@17a00000 {
> +			label = "apps_rsc";
> +			compatible = "qcom,rpmh-rsc";
> +			reg = <0x0 0x17a00000 0x0 0x10000>,
> +			      <0x0 0x17a10000 0x0 0x10000>,
> +			      <0x0 0x17a20000 0x0 0x10000>;
> +			reg-names = "drv-0", "drv-1", "drv-2";
> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,tcs-offset = <0xd00>;
> +			qcom,drv-id = <2>;
> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
> +
> +			apps_bcm_voter: bcm_voter {
> +				compatible = "qcom,bcm-voter";
> +			};
> +
> +			rpmhcc: clock-controller {
> +				compatible = "qcom,qdu1000-rpmh-clk", "qcom,qru1000-rpmh-clk";
> +				#clock-cells = <1>;
> +				clock-names = "xo";
> +				clocks = <&xo_board>;
> +			};
> +
> +			rpmhpd: power-controller {
> +				compatible = "qcom,qdu1000-rpmhpd", "qcom,qru1000-rpmhpd";
> +				#power-domain-cells = <1>;
> +				operating-points-v2 = <&rpmhpd_opp_table>;
> +
> +				rpmhpd_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					rpmhpd_opp_ret: opp1 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> +					};
> +
> +					rpmhpd_opp_min_svs: opp2 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> +					};
> +
> +					rpmhpd_opp_low_svs: opp3 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> +					};
> +
> +					rpmhpd_opp_svs: opp4 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> +					};
> +
> +					rpmhpd_opp_svs_l1: opp5 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> +					};
> +
> +					rpmhpd_opp_nom: opp6 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> +					};
> +
> +					rpmhpd_opp_nom_l1: opp7 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> +					};
> +
> +					rpmhpd_opp_nom_l2: opp8 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> +					};
> +
> +					rpmhpd_opp_turbo: opp9 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> +					};
> +
> +					rpmhpd_opp_turbo_l1: opp10 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> +					};
> +				};
> +			};
> +		};
> +
> +		cpufreq_hw: cpufreq@17d91000 {
> +			compatible = "qcom, qdu1000-cpufreq-epss", "qcom, qru1000-cpufreq-epss",
> +				"qcom,cpufreq-epss";
> +			reg = <0x0 0x17d91000 0x0 0x1000>;
> +			reg-names = "freq-domain0";
> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> +			clock-names = "xo", "alternate";
> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "dcvsh-irq-0";
> +			#freq-domain-cells = <1>;
> +		};
> +
> +		gem_noc: interconnect@19100000 {
> +			reg = <0x0 0x19100000 0x0 0xB8080>;
> +			compatible = "qcom,qdu1000-gem-noc", "qcom,qru1000-gem-noc";
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		arch_timer: timer {
> +			compatible = "arm,armv8-timer";
> +			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +				     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> +			clock-frequency = <19200000>;
> +		};
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
> new file mode 100644
> index 000000000000..074fe126e85e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
> @@ -0,0 +1,27 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include "qdu1000.dtsi"
> +
> +&reserved_memory {
> +	/delete-node/ memory@a0000000;
> +	/delete-node/ memory@b9600000;
> +	/delete-node/ memory@c0000000;
> +
> +	oem_tenx_mem: memory@a0000000 {
> +		no-map;
> +		reg = <0x0 0xa0000000 0x0 0x6400000>;
> +	};
> +
> +	mpss_diag_buffer_mem: memory@aea00000 {
> +		no-map;
> +		reg = <0x0 0xaea00000 0x0 0x6400000>;
> +	};
> +
> +	tenx_q6_buffer_mem: memory@b4e00000 {
> +		no-map;
> +		reg = <0x0 0xb4e00000 0x0 0x3200000>;
> +	};
> +};
> -- 
> 2.38.0

Melody Olvera Oct. 24, 2022, 5:10 p.m. UTC | #14

On 10/23/2022 5:53 PM, Richard Acayan wrote:
>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>> to boot to shell with console on these SoCs.
>>
>> Signed-off-by: Melody Olvera <[e-mail]>
>> ---
>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>  2 files changed, 1673 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> new file mode 100644
>> index 000000000000..777734b30f56
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> @@ -0,0 +1,1646 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>> +#include <dt-bindings/clock/qcom,rpmh.h>
>> +#include <dt-bindings/dma/qcom-gpi.h>
>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>> +#include <dt-bindings/power/qcom-rpmpd.h>
>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +
>> +/ {
>> +	interrupt-parent = <&intc>;
>> +
>> +	#address-cells = <2>;
>> +	#size-cells = <2>;
>> +
>> +	chosen: chosen { };
>> +
>> +	clocks {
>> +		xo_board: xo-board {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <19200000>;
>> +			clock-output-names = "xo_board";
>> +			#clock-cells = <0>;
>> +		};
>> +
>> +		sleep_clk: sleep-clk {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <32000>;
>> +			#clock-cells = <0>;
>> +		};
>> +	};
>> +
>> +	cpus {
>> +		#address-cells = <2>;
>> +		#size-cells = <0>;
>> +
>> +		CPU0: cpu@0 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x0>;
>> +			enable-method = "psci";
>> +			power-domain-names = "psci";
>> +			power-domains = <&CPU_PD0>;
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_0>;
>> +			L2_0: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
>> +				L3_0: l3-cache {
>> +					compatible = "cache";
>> +				};
>> +			};
>> +		};
>> +
>> +		CPU1: cpu@100 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x100>;
>> +			enable-method = "psci";
>> +			power-domains = <&CPU_PD1>;
>> +			power-domain-names = "psci";
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_100>;
>> +			L2_100: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
>> +			};
>> +
>> +		};
>> +
>> +		CPU2: cpu@200 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x200>;
>> +			enable-method = "psci";
>> +			power-domains = <&CPU_PD2>;
>> +			power-domain-names = "psci";
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_200>;
>> +			L2_200: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
>> +			};
>> +		};
>> +
>> +		CPU3: cpu@300 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x300>;
>> +			enable-method = "psci";
>> +			power-domains = <&CPU_PD3>;
>> +			power-domain-names = "psci";
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_300>;
>> +			L2_300: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
>> +			};
>> +
>> +		};
>> +
>> +		cpu-map {
>> +			cluster0 {
>> +				core0 {
>> +					cpu = <&CPU0>;
>> +				};
>> +
>> +				core1 {
>> +					cpu = <&CPU1>;
>> +				};
>> +
>> +				core2 {
>> +					cpu = <&CPU2>;
>> +				};
>> +
>> +				core3 {
>> +					cpu = <&CPU3>;
>> +				};
>> +			};
>> +		};
>> +	};
>> +
>> +	idle-states {
>> +		entry-method = "psci";
>> +
>> +		CPU_OFF: cpu-sleep-0 {
>> +			compatible = "arm,idle-state";
>> +			idle-state-name = "rail-pc";
>> +			entry-latency-us = <274>;
>> +			exit-latency-us = <480>;
>> +			min-residency-us = <3934>;
>> +			arm,psci-suspend-param = <0x40000004>;
>> +			local-timer-stop;
>> +		};
>> +	};
>> +
>> +	domain-idle-states {
>> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
>> +			compatible = "domain-idle-state";
>> +			idle-state-name = "cluster-l3-off";
>> +			entry-latency-us = <584>;
>> +			exit-latency-us = <2332>;
>> +			min-residency-us = <6118>;
>> +			arm,psci-suspend-param = <0x41000044>;
>> +		};
>> +
>> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
>> +			compatible = "domain-idle-state";
>> +			idle-state-name = "cluster-power-collapse";
>> +			entry-latency-us = <2893>;
>> +			exit-latency-us = <4023>;
>> +			min-residency-us = <9987>;
>> +			arm,psci-suspend-param = <0x41003344>;
>> +		};
>> +	};
>> +
>> +	firmware {
>> +		qcom_scm {
>> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
>> +			#reset-cells = <1>;
>> +		};
>> +	};
>> +
>> +	clk_virt: interconnect-0 {
>> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
>> +		#interconnect-cells = <2>;
>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>> +	};
>> +
>> +	mc_virt: interconnect-1 {
>> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
>> +		#interconnect-cells = <2>;
>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>> +	};
>> +
>> +	memory@80000000 {
>> +		device_type = "memory";
>> +		/* We expect the bootloader to fill in the size */
>> +		reg = <0x0 0x80000000 0x0 0x0>;
>> +	};
>> +
>> +	pmu {
>> +		compatible = "arm,armv8-pmuv3";
>> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> +	};
>> +
>> +	psci {
>> +		compatible = "arm,psci-1.0";
>> +		method = "smc";
>> +
>> +		CPU_PD0: cpu-pd0 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CPU_PD1: cpu-pd1 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CPU_PD2: cpu-pd2 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CPU_PD3: cpu-pd3 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CLUSTER_PD: cluster-pd {
>> +			#power-domain-cells = <0>;
>> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
>> +		};
>> +	};
>> +
>> +	reserved_memory: reserved-memory {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
>> +
>> +		hyp_mem: memory@80000000 {
>> +			no-map;
>> +			reg = <0x0 0x80000000 0x0 0x600000>;
>> +		};
>> +
>> +		xbl_dt_log_mem: memory@80600000 {
>> +			no-map;
>> +			reg = <0x0 0x80600000 0x0 0x40000>;
>> +		};
>> +
>> +		xbl_ramdump_mem: memory@80640000 {
>> +			no-map;
>> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
>> +		};
>> +
>> +		aop_image_mem: memory@80800000 {
>> +			no-map;
>> +			reg = <0x0 0x80800000 0x0 0x60000>;
>> +		};
>> +
>> +		aop_cmd_db_mem: memory@80860000 {
>> +			compatible = "qcom,cmd-db";
>> +			no-map;
>> +			reg = <0x0 0x80860000 0x0 0x20000>;
>> +		};
>> +
>> +		aop_config_mem: memory@80880000 {
>> +			no-map;
>> +			reg = <0x0 0x80880000 0x0 0x20000>;
>> +		};
>> +
>> +		tme_crash_dump_mem: memory@808a0000 {
>> +			no-map;
>> +			reg = <0x0 0x808a0000 0x0 0x40000>;
>> +		};
>> +
>> +		tme_log_mem: memory@808e0000 {
>> +			no-map;
>> +			reg = <0x0 0x808e0000 0x0 0x4000>;
>> +		};
>> +
>> +		uefi_log_mem: memory@808e4000 {
>> +			no-map;
>> +			reg = <0x0 0x808e4000 0x0 0x10000>;
>> +		};
>> +
>> +		/* secdata region can be reused by apps */
>> +
>> +		smem_mem: memory@80900000 {
>> +			compatible = "qcom,smem";
>> +			no-map;
>> +			reg = <0x0 0x80900000 0x0 0x200000>;
>> +			hwlocks = <&tcsr_mutex 3>;
>> +		};
>> +
>> +		cpucp_fw_mem: memory@80b00000 {
>> +			no-map;
>> +			reg = <0x0 0x80b00000 0x0 0x100000>;
>> +		};
>> +
>> +		xbl_sc_mem: memory@80c00000 {
>> +			no-map;
>> +			reg = <0x0 0x80c00000 0x0 0x40000>;
>> +		};
>> +
>> +		/* uefi region can be reused by apps */
>> +
>> +		tz_stat_mem: memory@81d00000 {
>> +			no-map;
>> +			reg = <0x0 0x81d00000 0x0 0x100000>;
>> +		};
>> +
>> +		tags_mem: memory@81e00000 {
>> +			no-map;
>> +			reg = <0x0 0x81e00000 0x0 0x500000>;
>> +		};
>> +
>> +		qtee_mem: memory@82300000 {
>> +			no-map;
>> +			reg = <0x0 0x82300000 0x0 0x500000>;
>> +		};
>> +
>> +		ta_mem: memory@82800000 {
>> +			no-map;
>> +			reg = <0x0 0x82800000 0x0 0xa00000>;
>> +		};
>> +
>> +		fs1_mem: memory@83200000 {
>> +			no-map;
>> +			reg = <0x0 0x83200000 0x0 0x400000>;
>> +		};
>> +
>> +		fs2_mem: memory@83600000 {
>> +			no-map;
>> +			reg = <0x0 0x83600000 0x0 0x400000>;
>> +		};
>> +
>> +		fs3_mem: memory@83a00000 {
>> +			no-map;
>> +			reg = <0x0 0x83a00000 0x0 0x400000>;
>> +		};
>> +
>> +		/* Linux kernel image is loaded at 0x83e00000 */
>> +
>> +		ipa_fw_mem: memory@8be00000 {
>> +			no-map;
>> +			reg = <0x0 0x8be00000 0x0 0x10000>;
>> +		};
>> +
>> +		ipa_gsi_mem: memory@8be10000 {
>> +			no-map;
>> +			reg = <0x0 0x8be10000 0x0 0x14000>;
>> +		};
>> +
>> +		mpss_mem: memory@8c000000 {
>> +			no-map;
>> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
>> +		};
>> +
>> +		q6_mpss_dtb_mem: memory@9ec00000 {
>> +			no-map;
>> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
>> +		};
>> +
>> +		tenx_mem: memory@a0000000 {
>> +			no-map;
>> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
>> +		};
>> +
>> +		oem_tenx_mem: memory@b9600000 {
>> +			no-map;
>> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
>> +		};
>> +
>> +		tenx_q6_buffer_mem: memory@c0000000 {
>> +			no-map;
>> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
>> +		};
>> +
>> +		ipa_buffer_mem: memory@c3200000 {
>> +			no-map;
>> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
>> +		};
>> +	};
>> +
>> +	soc: soc@0 {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges = <0 0 0 0 0x10 0>;
>> +		dma-ranges = <0 0 0 0 0x10 0>;
>> +		compatible = "simple-bus";
>> +
>> +		gcc: clock-controller@80000 {
>> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
>> +			reg = <0x0 0x80000 0x0 0x1f4200>;
>> +			#clock-cells = <1>;
>> +			#reset-cells = <1>;
>> +			#power-domain-cells = <1>;
>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
>> +			clock-names = "bi_tcxo", "sleep_clk";
>> +		};
>> +
>> +		gpi_dma0: dma-controller@900000  {
>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
> This won't work if you drop series [1]. It won't just fail the schema checks,
> but it would also fail to probe because the driver doesn't recognise it.
>
> I think you were told to rebase on [2], and didn't change your own series
> because it only applied to ee_offset = 0x0. There is another series [3] that
> was sent to you, meant for ee_offset = 0x10000. You're expected to change your
> patches (in both series you sent) based on what was changed in that series.
>
> [1] https://lore.kernel.org/linux-arm-msm/[e-mail]/
> [2] https://lore.kernel.org/linux-arm-msm/[e-mail]/T/
> [3] https://lore.kernel.org/linux-arm-msm/[e-mail]/T/
Hi Richard; I was aware of this feedback and was planning to make that change in v3.
PS [1] will be dropped and this compatible will be modified similar to PS [3]; that was
what I meant by my final comment on [1].
>
>> +			#dma-cells = <5>;
>> +			reg = <0x0 0x900000 0x0 0x60000>;
>> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
>> +			dma-channels = <12>;
>> +			dma-channel-mask = <0x3f>;
>> +			iommus = <&apps_smmu 0xf6 0x0>;
>> +			status = "ok";
>> +		};
>> +
>> +		qupv3_id_0: geniqup@9c0000 {
>> +			compatible = "qcom,geni-se-qup";
>> +			reg = <0x0 0x9c0000 0x0 0x2000>;
>> +			clock-names = "m-ahb", "s-ahb";
>> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>> +			iommus = <&apps_smmu 0xe3 0x0>;
>> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
>> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
>> +			interconnect-names = "qup-core";
>> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
>> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
>> +			qcom,iommu-dma = "fastmap";
>> +			dma-coherent;
>> +
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges;
>> +			status = "disabled";
>> +
>> +			uart0: serial@980000 {
>> +				compatible = "qcom,geni-uart";
>> +				reg = <0x0 0x980000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart0_default>;
>> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c1: i2c@984000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x984000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c1_data_clk>;
>> +				dmas = <&gpi_dma0 0 1 3 64 0>,
>> +					<&gpi_dma0 1 1 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi1: spi@984000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x984000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
>> +				dmas = <&gpi_dma0 0 1 1 64 0>,
>> +					<&gpi_dma0 1 1 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c2: i2c@988000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x988000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c2_data_clk>;
>> +				dmas = <&gpi_dma0 0 2 3 64 0>,
>> +					<&gpi_dma0 1 2 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi2: spi@988000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x988000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
>> +				dmas = <&gpi_dma0 0 2 1 64 0>,
>> +					<&gpi_dma0 1 2 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c3: i2c@98c000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c3_data_clk>;
>> +				dmas = <&gpi_dma0 0 3 3 64 0>,
>> +					<&gpi_dma0 1 3 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi3: spi@98c000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
>> +				dmas = <&gpi_dma0 0 3 1 64 0>,
>> +					<&gpi_dma0 1 3 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c4: i2c@990000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x990000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c4_data_clk>;
>> +				dmas = <&gpi_dma0 0 4 3 64 0>,
>> +					<&gpi_dma0 1 4 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi4: spi@990000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x990000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
>> +				dmas = <&gpi_dma0 0 4 1 64 0>,
>> +					<&gpi_dma0 1 4 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c5: i2c@994000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x994000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c5_data_clk>;
>> +				dmas = <&gpi_dma0 0 5 3 64 0>,
>> +					<&gpi_dma0 1 5 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi5: spi@994000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x994000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
>> +				dmas = <&gpi_dma0 0 5 1 64 0>,
>> +					<&gpi_dma0 1 5 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c6: i2c@998000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x998000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c6_data_clk>;
>> +				dmas = <&gpi_dma0 0 6 3 64 0>,
>> +					<&gpi_dma0 1 6 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi6: spi@998000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x998000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
>> +				dmas = <&gpi_dma0 0 6 1 64 0>,
>> +					<&gpi_dma0 1 6 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			uart7: serial@99c000 {
>> +				compatible = "qcom,geni-debug-uart";
>> +				reg = <0x0 0x99c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
>> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +		};
>> +
>> +		gpi_dma1: dma-controller@a00000  {
>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
> See above.
>
>> +			#dma-cells = <5>;
>> +			reg = <0x0 0xa00000 0x0 0x60000>;
>> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
>> +			dma-channels = <12>;
>> +			dma-channel-mask = <0x3f>;
>> +			iommus = <&apps_smmu 0x116 0x0>;
>> +			status = "ok";
>> +		};
>> +
>> +		qupv3_id_1: geniqup@ac0000 {
>> +			compatible = "qcom,geni-se-qup";
>> +			reg = <0x0 0xac0000 0x0 0x2000>;
>> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
>> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
>> +			iommus = <&apps_smmu 0x103 0x0>;
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +			clock-names = "m-ahb", "s-ahb";
>> +
>> +			ranges;
>> +			status = "disabled";
>> +
>> +			uart8: serial@a80000 {
>> +				compatible = "qcom,geni-uart";
>> +				reg = <0x0 0xa80000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart8_default>;
>> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c9: i2c@a84000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c9_data_clk>;
>> +				dmas = <&gpi_dma1 0 1 3 64 0>,
>> +					<&gpi_dma1 1 1 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi9: spi@a84000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
>> +				dmas = <&gpi_dma1 0 1 1 64 0>,
>> +					<&gpi_dma1 1 1 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c10: i2c@a88000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c10_data_clk>;
>> +				dmas = <&gpi_dma1 0 2 3 64 0>,
>> +					<&gpi_dma1 1 2 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi10: spi@a88000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
>> +				dmas = <&gpi_dma1 0 2 1 64 0>,
>> +					<&gpi_dma1 1 2 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c11: i2c@a8c000 {
>> +				compatible = "qcom,i2c-geni";
>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c11_data_clk>;
>> +				dmas = <&gpi_dma1 0 3 3 64 0>,
>> +					<&gpi_dma1 1 3 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi11: spi@a8c000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
>> +				dmas = <&gpi_dma1 0 3 1 64 0>,
>> +					<&gpi_dma1 1 3 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c12: i2c@a90000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c12_data_clk>;
>> +				dmas = <&gpi_dma1 0 4 3 64 0>,
>> +					<&gpi_dma1 1 4 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi12: spi@a90000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
>> +				dmas = <&gpi_dma1 0 4 1 64 0>,
>> +					<&gpi_dma1 1 4 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c13: i2c@a94000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c13_data_clk>;
>> +				dmas = <&gpi_dma1 0 5 3 64 0>,
>> +					<&gpi_dma1 1 5 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			uart13: serial@a94000 {
>> +				compatible = "qcom,geni-uart";
>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart13_default>;
>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi13: spi@a94000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
>> +				dmas = <&gpi_dma1 0 5 1 64 0>,
>> +					<&gpi_dma1 1 5 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c14: i2c@a98000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c14_data_clk>;
>> +				dmas = <&gpi_dma1 0 6 3 64 0>,
>> +					<&gpi_dma1 1 6 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi14: spi@a98000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
>> +				dmas = <&gpi_dma1 0 6 1 64 0>,
>> +					<&gpi_dma1 1 6 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c15: i2c@a9c000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c15_data_clk>;
>> +				dmas = <&gpi_dma1 0 7 3 64 0>,
>> +					<&gpi_dma1 1 7 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi15: spi@a9c000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
>> +				dmas = <&gpi_dma1 0 7 1 64 0>,
>> +					<&gpi_dma1 1 7 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +		};
>> +
>> +		system_noc: interconnect@1640000 {
>> +			reg = <0x0 0x1640000 0x0 0x45080>;
>> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
>> +			#interconnect-cells = <1>;
>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>> +		};
>> +
>> +		tcsr_mutex: hwlock@1f40000 {
>> +			compatible = "qcom,tcsr-mutex";
>> +			reg = <0x0 0x1f40000 0x0 0x20000>;
>> +			#hwlock-cells = <1>;
>> +		};
>> +
>> +		pdc: interrupt-controller@b220000 {
>> +			compatible = "qcom,pdc";
>> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
>> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
>> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
>> +					  <94 609 31>, <125 63 1>;
>> +			#interrupt-cells = <2>;
>> +			interrupt-parent = <&intc>;
>> +			interrupt-controller;
>> +		};
>> +
>> +		spmi_bus: spmi@c400000 {
>> +			compatible = "qcom,spmi-pmic-arb";
>> +			reg = <0x0 0xc400000 0x0 0x3000>,
>> +			      <0x0 0xc500000 0x0 0x400000>,
>> +			      <0x0 0xc440000 0x0 0x80000>,
>> +			      <0x0 0xc4c0000 0x0 0x10000>,
>> +			      <0x0 0xc42d000 0x0 0x4000>;
>> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>> +			interrupt-names = "periph_irq";
>> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>> +			qcom,ee = <0>;
>> +			qcom,channel = <0>;
>> +			#address-cells = <2>;
>> +			#size-cells = <0>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <4>;
>> +		};
>> +
>> +		tlmm: pinctrl@f000000 {
>> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
>> +			reg = <0x0 0xf000000 0x0 0x1000000>;
>> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +			gpio-ranges = <&tlmm 0 0 151>;
>> +			wakeup-parent = <&pdc>;
>> +
>> +			qup_uart0_default: qup-uart0-default-state {
>> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
>> +				function = "qup00";
>> +			};
>> +
>> +			qup_i2c1_data_clk: qup-i2c1-data-clk {
>> +				pins = "gpio10", "gpio11";
>> +				function = "qup01";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi1_data_clk: qup-spi1-data-clk {
>> +				pins = "gpio10", "gpio11", "gpio12";
>> +				function = "qup01";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi1_cs: qup-spi1-cs {
>> +				pins = "gpio13";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
>> +				pins = "gpio12", "gpio13";
>> +				function = "qup02";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi2_data_clk: qup-spi2-data-clk {
>> +				pins = "gpio12", "gpio13", "gpio10";
>> +				function = "qup02";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi2_cs: qup-spi2-cs {
>> +				pins = "gpio11";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
>> +				pins = "gpio14", "gpio15";
>> +				function = "qup03";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi3_data_clk: qup-spi3-data-clk {
>> +				pins = "gpio14", "gpio15", "gpio16";
>> +				function = "qup03";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi3_cs: qup-spi3-cs {
>> +				pins = "gpio17";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
>> +				pins = "gpio16", "gpio17";
>> +				function = "qup04";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi4_data_clk: qup-spi4-data-clk {
>> +				pins = "gpio16", "gpio17", "gpio14";
>> +				function = "qup04";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi4_cs: qup-spi4-cs {
>> +				pins = "gpio15";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
>> +				pins = "gpio130", "gpio131";
>> +				function = "qup05";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi5_data_clk: qup-spi5-data-clk {
>> +				pins = "gpio130", "gpio131", "gpio132";
>> +				function = "qup05";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi5_cs: qup-spi5-cs {
>> +				pins = "gpio133";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
>> +				pins = "gpio132", "gpio133";
>> +				function = "qup06";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi6_data_clk: qup-spi6-data-clk {
>> +				pins = "gpio132", "gpio133", "gpio130";
>> +				function = "qup06";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi6_cs: qup-spi6-cs {
>> +				pins = "gpio131";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart7_rx: qup-uart7-rx {
>> +				pins = "gpio135";
>> +				function = "qup07";
>> +				drive-strength = <2>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart7_tx: qup-uart7-tx  {
>> +				pins = "gpio134";
>> +				function = "qup07";
>> +				drive-strength = <2>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart8_default: qup-uart8-default {
>> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
>> +				function = "qup10";
>> +			};
>> +
>> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
>> +				pins = "gpio22", "gpio23";
>> +				function = "qup11";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi9_data_clk: qup-spi9-data-clk {
>> +				pins = "gpio22", "gpio23", "gpio24";
>> +				function = "qup11";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi9_cs: qup-spi9-cs {
>> +				pins = "gpio25";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
>> +				pins = "gpio24", "gpio25";
>> +				function = "qup12";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi10_data_clk: qup-spi10-data-clk {
>> +				pins = "gpio24", "gpio25", "gpio22";
>> +				function = "qup12";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi10_cs: qup-spi10-cs {
>> +				pins = "gpio23";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
>> +				pins = "gpio26", "gpio27";
>> +				function = "qup13";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi11_data_clk: qup-spi11-data-clk {
>> +				pins = "gpio26", "gpio27", "gpio28";
>> +				function = "qup13";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi11_cs: qup-spi11-cs {
>> +				pins = "gpio29";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
>> +				pins = "gpio28", "gpio29";
>> +				function = "qup14";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi12_data_clk: qup-spi12-data-clk {
>> +				pins = "gpio28", "gpio29", "gpio26";
>> +				function = "qup14";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi12_cs: qup-spi12-cs {
>> +				pins = "gpio27";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
>> +				pins = "gpio30", "gpio31";
>> +				function = "qup15";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi13_data_clk: qup-spi13-data-clk {
>> +				pins = "gpio30", "gpio31", "gpio32";
>> +				function = "qup15";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi13_cs: qup-spi13-cs {
>> +				pins = "gpio33";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart13_default: qup-uart13-default {
>> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
>> +				function = "qup15";
>> +			};
>> +
>> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
>> +				pins = "gpio34", "gpio35";
>> +				function = "qup16";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi14_data_clk: qup-spi14-data-clk {
>> +				pins = "gpio34", "gpio35", "gpio36";
>> +				function = "qup16";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi14_cs: qup-spi14-cs {
>> +				pins = "gpio37", "gpio38";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
>> +				pins = "gpio40", "gpio41";
>> +				function = "qup17";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi15_data_clk: qup-spi15-data-clk {
>> +				pins = "gpio40", "gpio41", "gpio30";
>> +				function = "qup17";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi15_cs: qup-spi15-cs {
>> +				pins = "gpio31";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +		};
>> +
>> +		apps_smmu: apps-smmu@15000000 {
>> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
>> +				"arm,mmu-500";
>> +			reg = <0x0 0x15000000 0x0 0x100000>;
>> +			#iommu-cells = <2>;
>> +			#global-interrupts = <2>;
>> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
>> +		};
>> +
>> +		intc: interrupt-controller@17200000 {
>> +			compatible = "arm,gic-v3";
>> +			#interrupt-cells = <3>;
>> +			interrupt-controller;
>> +			#redistributor-regions = <1>;
>> +			redistributor-stride = <0x0 0x20000>;
>> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
>> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
>> +		};
>> +
>> +		timer@17420000 {
>> +			compatible = "arm,armv7-timer-mem";
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges;
>> +			reg = <0x0 0x17420000 0x0 0x1000>;
>> +			clock-frequency = <19200000>;
>> +
>> +			frame@17421000 {
>> +				frame-number = <0>;
>> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17421000 0x0 0x1000>,
>> +				      <0x0 0x17422000 0x0 0x1000>;
>> +			};
>> +
>> +			frame@17423000 {
>> +				frame-number = <1>;
>> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17423000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@17425000 {
>> +				frame-number = <2>;
>> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17425000 0x0 0x1000>,
>> +				      <0x0 0x17426000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@17427000 {
>> +				frame-number = <3>;
>> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17427000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@17429000 {
>> +				frame-number = <4>;
>> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17429000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@1742b000 {
>> +				frame-number = <5>;
>> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x1742b000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@1742d000 {
>> +				frame-number = <6>;
>> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x1742d000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +		};
>> +
>> +		apps_rsc: rsc@17a00000 {
>> +			label = "apps_rsc";
>> +			compatible = "qcom,rpmh-rsc";
>> +			reg = <0x0 0x17a00000 0x0 0x10000>,
>> +			      <0x0 0x17a10000 0x0 0x10000>,
>> +			      <0x0 0x17a20000 0x0 0x10000>;
>> +			reg-names = "drv-0", "drv-1", "drv-2";
>> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>> +			qcom,tcs-offset = <0xd00>;
>> +			qcom,drv-id = <2>;
>> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
>> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
>> +
>> +			apps_bcm_voter: bcm_voter {
>> +				compatible = "qcom,bcm-voter";
>> +			};
>> +
>> +			rpmhcc: clock-controller {
>> +				compatible = "qcom,qdu1000-rpmh-clk", "qcom,qru1000-rpmh-clk";
>> +				#clock-cells = <1>;
>> +				clock-names = "xo";
>> +				clocks = <&xo_board>;
>> +			};
>> +
>> +			rpmhpd: power-controller {
>> +				compatible = "qcom,qdu1000-rpmhpd", "qcom,qru1000-rpmhpd";
>> +				#power-domain-cells = <1>;
>> +				operating-points-v2 = <&rpmhpd_opp_table>;
>> +
>> +				rpmhpd_opp_table: opp-table {
>> +					compatible = "operating-points-v2";
>> +
>> +					rpmhpd_opp_ret: opp1 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
>> +					};
>> +
>> +					rpmhpd_opp_min_svs: opp2 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>> +					};
>> +
>> +					rpmhpd_opp_low_svs: opp3 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>> +					};
>> +
>> +					rpmhpd_opp_svs: opp4 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>> +					};
>> +
>> +					rpmhpd_opp_svs_l1: opp5 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>> +					};
>> +
>> +					rpmhpd_opp_nom: opp6 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>> +					};
>> +
>> +					rpmhpd_opp_nom_l1: opp7 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>> +					};
>> +
>> +					rpmhpd_opp_nom_l2: opp8 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
>> +					};
>> +
>> +					rpmhpd_opp_turbo: opp9 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
>> +					};
>> +
>> +					rpmhpd_opp_turbo_l1: opp10 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
>> +					};
>> +				};
>> +			};
>> +		};
>> +
>> +		cpufreq_hw: cpufreq@17d91000 {
>> +			compatible = "qcom, qdu1000-cpufreq-epss", "qcom, qru1000-cpufreq-epss",
>> +				"qcom,cpufreq-epss";
>> +			reg = <0x0 0x17d91000 0x0 0x1000>;
>> +			reg-names = "freq-domain0";
>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
>> +			clock-names = "xo", "alternate";
>> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "dcvsh-irq-0";
>> +			#freq-domain-cells = <1>;
>> +		};
>> +
>> +		gem_noc: interconnect@19100000 {
>> +			reg = <0x0 0x19100000 0x0 0xB8080>;
>> +			compatible = "qcom,qdu1000-gem-noc", "qcom,qru1000-gem-noc";
>> +			#interconnect-cells = <1>;
>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>> +		};
>> +
>> +		arch_timer: timer {
>> +			compatible = "arm,armv8-timer";
>> +			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> +				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> +				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> +				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> +				     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>> +			clock-frequency = <19200000>;
>> +		};
>> +	};
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>> new file mode 100644
>> index 000000000000..074fe126e85e
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>> @@ -0,0 +1,27 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include "qdu1000.dtsi"
>> +
>> +&reserved_memory {
>> +	/delete-node/ memory@a0000000;
>> +	/delete-node/ memory@b9600000;
>> +	/delete-node/ memory@c0000000;
>> +
>> +	oem_tenx_mem: memory@a0000000 {
>> +		no-map;
>> +		reg = <0x0 0xa0000000 0x0 0x6400000>;
>> +	};
>> +
>> +	mpss_diag_buffer_mem: memory@aea00000 {
>> +		no-map;
>> +		reg = <0x0 0xaea00000 0x0 0x6400000>;
>> +	};
>> +
>> +	tenx_q6_buffer_mem: memory@b4e00000 {
>> +		no-map;
>> +		reg = <0x0 0xb4e00000 0x0 0x3200000>;
>> +	};
>> +};
>> -- 
>> 2.38.0
Thanks,
Melody

Richard Acayan Oct. 24, 2022, 10:28 p.m. UTC | #15

> On 10/23/2022 5:53 PM, Richard Acayan wrote:
>>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>>> to boot to shell with console on these SoCs.
>>>
>>> Signed-off-by: Melody Olvera <[e-mail]>
>>> ---
>>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>>  2 files changed, 1673 insertions(+)
>>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>> new file mode 100644
>>> index 000000000000..777734b30f56
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>> @@ -0,0 +1,1646 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>>> +#include <dt-bindings/clock/qcom,rpmh.h>
>>> +#include <dt-bindings/dma/qcom-gpi.h>
>>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>>> +#include <dt-bindings/power/qcom-rpmpd.h>
>>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>> +
>>> +/ {
>>> +	interrupt-parent = <&intc>;
>>> +
>>> +	#address-cells = <2>;
>>> +	#size-cells = <2>;
>>> +
>>> +	chosen: chosen { };
>>> +
>>> +	clocks {
>>> +		xo_board: xo-board {
>>> +			compatible = "fixed-clock";
>>> +			clock-frequency = <19200000>;
>>> +			clock-output-names = "xo_board";
>>> +			#clock-cells = <0>;
>>> +		};
>>> +
>>> +		sleep_clk: sleep-clk {
>>> +			compatible = "fixed-clock";
>>> +			clock-frequency = <32000>;
>>> +			#clock-cells = <0>;
>>> +		};
>>> +	};
>>> +
>>> +	cpus {
>>> +		#address-cells = <2>;
>>> +		#size-cells = <0>;
>>> +
>>> +		CPU0: cpu@0 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a55";
>>> +			reg = <0x0 0x0>;
>>> +			enable-method = "psci";
>>> +			power-domain-names = "psci";
>>> +			power-domains = <&CPU_PD0>;
>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>> +			next-level-cache = <&L2_0>;
>>> +			L2_0: l2-cache {
>>> +			      compatible = "cache";
>>> +			      next-level-cache = <&L3_0>;
>>> +				L3_0: l3-cache {
>>> +					compatible = "cache";
>>> +				};
>>> +			};
>>> +		};
>>> +
>>> +		CPU1: cpu@100 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a55";
>>> +			reg = <0x0 0x100>;
>>> +			enable-method = "psci";
>>> +			power-domains = <&CPU_PD1>;
>>> +			power-domain-names = "psci";
>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>> +			next-level-cache = <&L2_100>;
>>> +			L2_100: l2-cache {
>>> +			      compatible = "cache";
>>> +			      next-level-cache = <&L3_0>;
>>> +			};
>>> +
>>> +		};
>>> +
>>> +		CPU2: cpu@200 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a55";
>>> +			reg = <0x0 0x200>;
>>> +			enable-method = "psci";
>>> +			power-domains = <&CPU_PD2>;
>>> +			power-domain-names = "psci";
>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>> +			next-level-cache = <&L2_200>;
>>> +			L2_200: l2-cache {
>>> +			      compatible = "cache";
>>> +			      next-level-cache = <&L3_0>;
>>> +			};
>>> +		};
>>> +
>>> +		CPU3: cpu@300 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a55";
>>> +			reg = <0x0 0x300>;
>>> +			enable-method = "psci";
>>> +			power-domains = <&CPU_PD3>;
>>> +			power-domain-names = "psci";
>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>> +			next-level-cache = <&L2_300>;
>>> +			L2_300: l2-cache {
>>> +			      compatible = "cache";
>>> +			      next-level-cache = <&L3_0>;
>>> +			};
>>> +
>>> +		};
>>> +
>>> +		cpu-map {
>>> +			cluster0 {
>>> +				core0 {
>>> +					cpu = <&CPU0>;
>>> +				};
>>> +
>>> +				core1 {
>>> +					cpu = <&CPU1>;
>>> +				};
>>> +
>>> +				core2 {
>>> +					cpu = <&CPU2>;
>>> +				};
>>> +
>>> +				core3 {
>>> +					cpu = <&CPU3>;
>>> +				};
>>> +			};
>>> +		};
>>> +	};
>>> +
>>> +	idle-states {
>>> +		entry-method = "psci";
>>> +
>>> +		CPU_OFF: cpu-sleep-0 {
>>> +			compatible = "arm,idle-state";
>>> +			idle-state-name = "rail-pc";
>>> +			entry-latency-us = <274>;
>>> +			exit-latency-us = <480>;
>>> +			min-residency-us = <3934>;
>>> +			arm,psci-suspend-param = <0x40000004>;
>>> +			local-timer-stop;
>>> +		};
>>> +	};
>>> +
>>> +	domain-idle-states {
>>> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
>>> +			compatible = "domain-idle-state";
>>> +			idle-state-name = "cluster-l3-off";
>>> +			entry-latency-us = <584>;
>>> +			exit-latency-us = <2332>;
>>> +			min-residency-us = <6118>;
>>> +			arm,psci-suspend-param = <0x41000044>;
>>> +		};
>>> +
>>> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
>>> +			compatible = "domain-idle-state";
>>> +			idle-state-name = "cluster-power-collapse";
>>> +			entry-latency-us = <2893>;
>>> +			exit-latency-us = <4023>;
>>> +			min-residency-us = <9987>;
>>> +			arm,psci-suspend-param = <0x41003344>;
>>> +		};
>>> +	};
>>> +
>>> +	firmware {
>>> +		qcom_scm {
>>> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
>>> +			#reset-cells = <1>;
>>> +		};
>>> +	};
>>> +
>>> +	clk_virt: interconnect-0 {
>>> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
>>> +		#interconnect-cells = <2>;
>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>> +	};
>>> +
>>> +	mc_virt: interconnect-1 {
>>> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
>>> +		#interconnect-cells = <2>;
>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>> +	};
>>> +
>>> +	memory@80000000 {
>>> +		device_type = "memory";
>>> +		/* We expect the bootloader to fill in the size */
>>> +		reg = <0x0 0x80000000 0x0 0x0>;
>>> +	};
>>> +
>>> +	pmu {
>>> +		compatible = "arm,armv8-pmuv3";
>>> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>> +	};
>>> +
>>> +	psci {
>>> +		compatible = "arm,psci-1.0";
>>> +		method = "smc";
>>> +
>>> +		CPU_PD0: cpu-pd0 {
>>> +			#power-domain-cells = <0>;
>>> +			power-domains = <&CLUSTER_PD>;
>>> +			domain-idle-states = <&CPU_OFF>;
>>> +		};
>>> +
>>> +		CPU_PD1: cpu-pd1 {
>>> +			#power-domain-cells = <0>;
>>> +			power-domains = <&CLUSTER_PD>;
>>> +			domain-idle-states = <&CPU_OFF>;
>>> +		};
>>> +
>>> +		CPU_PD2: cpu-pd2 {
>>> +			#power-domain-cells = <0>;
>>> +			power-domains = <&CLUSTER_PD>;
>>> +			domain-idle-states = <&CPU_OFF>;
>>> +		};
>>> +
>>> +		CPU_PD3: cpu-pd3 {
>>> +			#power-domain-cells = <0>;
>>> +			power-domains = <&CLUSTER_PD>;
>>> +			domain-idle-states = <&CPU_OFF>;
>>> +		};
>>> +
>>> +		CLUSTER_PD: cluster-pd {
>>> +			#power-domain-cells = <0>;
>>> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
>>> +		};
>>> +	};
>>> +
>>> +	reserved_memory: reserved-memory {
>>> +		#address-cells = <2>;
>>> +		#size-cells = <2>;
>>> +		ranges;
>>> +
>>> +		hyp_mem: memory@80000000 {
>>> +			no-map;
>>> +			reg = <0x0 0x80000000 0x0 0x600000>;
>>> +		};
>>> +
>>> +		xbl_dt_log_mem: memory@80600000 {
>>> +			no-map;
>>> +			reg = <0x0 0x80600000 0x0 0x40000>;
>>> +		};
>>> +
>>> +		xbl_ramdump_mem: memory@80640000 {
>>> +			no-map;
>>> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
>>> +		};
>>> +
>>> +		aop_image_mem: memory@80800000 {
>>> +			no-map;
>>> +			reg = <0x0 0x80800000 0x0 0x60000>;
>>> +		};
>>> +
>>> +		aop_cmd_db_mem: memory@80860000 {
>>> +			compatible = "qcom,cmd-db";
>>> +			no-map;
>>> +			reg = <0x0 0x80860000 0x0 0x20000>;
>>> +		};
>>> +
>>> +		aop_config_mem: memory@80880000 {
>>> +			no-map;
>>> +			reg = <0x0 0x80880000 0x0 0x20000>;
>>> +		};
>>> +
>>> +		tme_crash_dump_mem: memory@808a0000 {
>>> +			no-map;
>>> +			reg = <0x0 0x808a0000 0x0 0x40000>;
>>> +		};
>>> +
>>> +		tme_log_mem: memory@808e0000 {
>>> +			no-map;
>>> +			reg = <0x0 0x808e0000 0x0 0x4000>;
>>> +		};
>>> +
>>> +		uefi_log_mem: memory@808e4000 {
>>> +			no-map;
>>> +			reg = <0x0 0x808e4000 0x0 0x10000>;
>>> +		};
>>> +
>>> +		/* secdata region can be reused by apps */
>>> +
>>> +		smem_mem: memory@80900000 {
>>> +			compatible = "qcom,smem";
>>> +			no-map;
>>> +			reg = <0x0 0x80900000 0x0 0x200000>;
>>> +			hwlocks = <&tcsr_mutex 3>;
>>> +		};
>>> +
>>> +		cpucp_fw_mem: memory@80b00000 {
>>> +			no-map;
>>> +			reg = <0x0 0x80b00000 0x0 0x100000>;
>>> +		};
>>> +
>>> +		xbl_sc_mem: memory@80c00000 {
>>> +			no-map;
>>> +			reg = <0x0 0x80c00000 0x0 0x40000>;
>>> +		};
>>> +
>>> +		/* uefi region can be reused by apps */
>>> +
>>> +		tz_stat_mem: memory@81d00000 {
>>> +			no-map;
>>> +			reg = <0x0 0x81d00000 0x0 0x100000>;
>>> +		};
>>> +
>>> +		tags_mem: memory@81e00000 {
>>> +			no-map;
>>> +			reg = <0x0 0x81e00000 0x0 0x500000>;
>>> +		};
>>> +
>>> +		qtee_mem: memory@82300000 {
>>> +			no-map;
>>> +			reg = <0x0 0x82300000 0x0 0x500000>;
>>> +		};
>>> +
>>> +		ta_mem: memory@82800000 {
>>> +			no-map;
>>> +			reg = <0x0 0x82800000 0x0 0xa00000>;
>>> +		};
>>> +
>>> +		fs1_mem: memory@83200000 {
>>> +			no-map;
>>> +			reg = <0x0 0x83200000 0x0 0x400000>;
>>> +		};
>>> +
>>> +		fs2_mem: memory@83600000 {
>>> +			no-map;
>>> +			reg = <0x0 0x83600000 0x0 0x400000>;
>>> +		};
>>> +
>>> +		fs3_mem: memory@83a00000 {
>>> +			no-map;
>>> +			reg = <0x0 0x83a00000 0x0 0x400000>;
>>> +		};
>>> +
>>> +		/* Linux kernel image is loaded at 0x83e00000 */
>>> +
>>> +		ipa_fw_mem: memory@8be00000 {
>>> +			no-map;
>>> +			reg = <0x0 0x8be00000 0x0 0x10000>;
>>> +		};
>>> +
>>> +		ipa_gsi_mem: memory@8be10000 {
>>> +			no-map;
>>> +			reg = <0x0 0x8be10000 0x0 0x14000>;
>>> +		};
>>> +
>>> +		mpss_mem: memory@8c000000 {
>>> +			no-map;
>>> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
>>> +		};
>>> +
>>> +		q6_mpss_dtb_mem: memory@9ec00000 {
>>> +			no-map;
>>> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
>>> +		};
>>> +
>>> +		tenx_mem: memory@a0000000 {
>>> +			no-map;
>>> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
>>> +		};
>>> +
>>> +		oem_tenx_mem: memory@b9600000 {
>>> +			no-map;
>>> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
>>> +		};
>>> +
>>> +		tenx_q6_buffer_mem: memory@c0000000 {
>>> +			no-map;
>>> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
>>> +		};
>>> +
>>> +		ipa_buffer_mem: memory@c3200000 {
>>> +			no-map;
>>> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
>>> +		};
>>> +	};
>>> +
>>> +	soc: soc@0 {
>>> +		#address-cells = <2>;
>>> +		#size-cells = <2>;
>>> +		ranges = <0 0 0 0 0x10 0>;
>>> +		dma-ranges = <0 0 0 0 0x10 0>;
>>> +		compatible = "simple-bus";
>>> +
>>> +		gcc: clock-controller@80000 {
>>> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
>>> +			reg = <0x0 0x80000 0x0 0x1f4200>;
>>> +			#clock-cells = <1>;
>>> +			#reset-cells = <1>;
>>> +			#power-domain-cells = <1>;
>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
>>> +			clock-names = "bi_tcxo", "sleep_clk";
>>> +		};
>>> +
>>> +		gpi_dma0: dma-controller@900000  {
>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>> This won't work if you drop series [1]. It won't just fail the schema checks,
>> but it would also fail to probe because the driver doesn't recognise it.
>>
>> I think you were told to rebase on [2], and didn't change your own series
>> because it only applied to ee_offset = 0x0. There is another series [3] that
>> was sent to you, meant for ee_offset = 0x10000. You're expected to change your
>> patches (in both series you sent) based on what was changed in that series.
>>
>> [1] https://lore.kernel.org/linux-arm-msm/[e-mail]/
>> [2] https://lore.kernel.org/linux-arm-msm/[e-mail]/T/
>> [3] https://lore.kernel.org/linux-arm-msm/[e-mail]/T/
> Hi Richard; I was aware of this feedback and was planning to make that change in v3.
> PS [1] will be dropped and this compatible will be modified similar to PS [3]; that was
> what I meant by my final comment on [1].

Ok, I should have checked the date. What about the schema patch? It might be
helpful for the device tree cleanup efforts if you didn't add a compatible
without adding a corresponding entry in the device tree bindings.

I'm talking about updating this patch in particular:

https://lore.kernel.org/linux-arm-msm/[e-mail]/

We still add compat strings in dt-bindings even when there is a fallback,
because the schema is meant to specify every combination of compat strings
found in the device trees.

>>
>>> +			#dma-cells = <5>;
>>> +			reg = <0x0 0x900000 0x0 0x60000>;
>>> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
>>> +			dma-channels = <12>;
>>> +			dma-channel-mask = <0x3f>;
>>> +			iommus = <&apps_smmu 0xf6 0x0>;
>>> +			status = "ok";
>>> +		};
>>> +
>>> +		qupv3_id_0: geniqup@9c0000 {
>>> +			compatible = "qcom,geni-se-qup";
>>> +			reg = <0x0 0x9c0000 0x0 0x2000>;
>>> +			clock-names = "m-ahb", "s-ahb";
>>> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>>> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>>> +			iommus = <&apps_smmu 0xe3 0x0>;
>>> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
>>> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
>>> +			interconnect-names = "qup-core";
>>> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
>>> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
>>> +			qcom,iommu-dma = "fastmap";
>>> +			dma-coherent;
>>> +
>>> +			#address-cells = <2>;
>>> +			#size-cells = <2>;
>>> +			ranges;
>>> +			status = "disabled";
>>> +
>>> +			uart0: serial@980000 {
>>> +				compatible = "qcom,geni-uart";
>>> +				reg = <0x0 0x980000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_uart0_default>;
>>> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c1: i2c@984000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c1_data_clk>;
>>> +				dmas = <&gpi_dma0 0 1 3 64 0>,
>>> +					<&gpi_dma0 1 1 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi1: spi@984000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
>>> +				dmas = <&gpi_dma0 0 1 1 64 0>,
>>> +					<&gpi_dma0 1 1 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c2: i2c@988000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c2_data_clk>;
>>> +				dmas = <&gpi_dma0 0 2 3 64 0>,
>>> +					<&gpi_dma0 1 2 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi2: spi@988000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
>>> +				dmas = <&gpi_dma0 0 2 1 64 0>,
>>> +					<&gpi_dma0 1 2 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c3: i2c@98c000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c3_data_clk>;
>>> +				dmas = <&gpi_dma0 0 3 3 64 0>,
>>> +					<&gpi_dma0 1 3 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi3: spi@98c000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
>>> +				dmas = <&gpi_dma0 0 3 1 64 0>,
>>> +					<&gpi_dma0 1 3 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c4: i2c@990000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c4_data_clk>;
>>> +				dmas = <&gpi_dma0 0 4 3 64 0>,
>>> +					<&gpi_dma0 1 4 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi4: spi@990000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
>>> +				dmas = <&gpi_dma0 0 4 1 64 0>,
>>> +					<&gpi_dma0 1 4 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c5: i2c@994000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c5_data_clk>;
>>> +				dmas = <&gpi_dma0 0 5 3 64 0>,
>>> +					<&gpi_dma0 1 5 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi5: spi@994000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
>>> +				dmas = <&gpi_dma0 0 5 1 64 0>,
>>> +					<&gpi_dma0 1 5 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c6: i2c@998000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c6_data_clk>;
>>> +				dmas = <&gpi_dma0 0 6 3 64 0>,
>>> +					<&gpi_dma0 1 6 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi6: spi@998000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
>>> +				dmas = <&gpi_dma0 0 6 1 64 0>,
>>> +					<&gpi_dma0 1 6 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			uart7: serial@99c000 {
>>> +				compatible = "qcom,geni-debug-uart";
>>> +				reg = <0x0 0x99c000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
>>> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +		};
>>> +
>>> +		gpi_dma1: dma-controller@a00000  {
>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>> See above.
>>
>>> +			#dma-cells = <5>;
>>> +			reg = <0x0 0xa00000 0x0 0x60000>;
>>> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
>>> +			dma-channels = <12>;
>>> +			dma-channel-mask = <0x3f>;
>>> +			iommus = <&apps_smmu 0x116 0x0>;
>>> +			status = "ok";
>>> +		};
>>> +
>>> +		qupv3_id_1: geniqup@ac0000 {
>>> +			compatible = "qcom,geni-se-qup";
>>> +			reg = <0x0 0xac0000 0x0 0x2000>;
>>> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
>>> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
>>> +			iommus = <&apps_smmu 0x103 0x0>;
>>> +			#address-cells = <1>;
>>> +			#size-cells = <1>;
>>> +			clock-names = "m-ahb", "s-ahb";
>>> +
>>> +			ranges;
>>> +			status = "disabled";
>>> +
>>> +			uart8: serial@a80000 {
>>> +				compatible = "qcom,geni-uart";
>>> +				reg = <0x0 0xa80000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_uart8_default>;
>>> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c9: i2c@a84000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c9_data_clk>;
>>> +				dmas = <&gpi_dma1 0 1 3 64 0>,
>>> +					<&gpi_dma1 1 1 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi9: spi@a84000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
>>> +				dmas = <&gpi_dma1 0 1 1 64 0>,
>>> +					<&gpi_dma1 1 1 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c10: i2c@a88000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c10_data_clk>;
>>> +				dmas = <&gpi_dma1 0 2 3 64 0>,
>>> +					<&gpi_dma1 1 2 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi10: spi@a88000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
>>> +				dmas = <&gpi_dma1 0 2 1 64 0>,
>>> +					<&gpi_dma1 1 2 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c11: i2c@a8c000 {
>>> +				compatible = "qcom,i2c-geni";
>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c11_data_clk>;
>>> +				dmas = <&gpi_dma1 0 3 3 64 0>,
>>> +					<&gpi_dma1 1 3 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi11: spi@a8c000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
>>> +				dmas = <&gpi_dma1 0 3 1 64 0>,
>>> +					<&gpi_dma1 1 3 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c12: i2c@a90000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c12_data_clk>;
>>> +				dmas = <&gpi_dma1 0 4 3 64 0>,
>>> +					<&gpi_dma1 1 4 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi12: spi@a90000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
>>> +				dmas = <&gpi_dma1 0 4 1 64 0>,
>>> +					<&gpi_dma1 1 4 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c13: i2c@a94000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c13_data_clk>;
>>> +				dmas = <&gpi_dma1 0 5 3 64 0>,
>>> +					<&gpi_dma1 1 5 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			uart13: serial@a94000 {
>>> +				compatible = "qcom,geni-uart";
>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_uart13_default>;
>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi13: spi@a94000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
>>> +				dmas = <&gpi_dma1 0 5 1 64 0>,
>>> +					<&gpi_dma1 1 5 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c14: i2c@a98000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c14_data_clk>;
>>> +				dmas = <&gpi_dma1 0 6 3 64 0>,
>>> +					<&gpi_dma1 1 6 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi14: spi@a98000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
>>> +				dmas = <&gpi_dma1 0 6 1 64 0>,
>>> +					<&gpi_dma1 1 6 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c15: i2c@a9c000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c15_data_clk>;
>>> +				dmas = <&gpi_dma1 0 7 3 64 0>,
>>> +					<&gpi_dma1 1 7 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi15: spi@a9c000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
>>> +				dmas = <&gpi_dma1 0 7 1 64 0>,
>>> +					<&gpi_dma1 1 7 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +		};
>>> +
>>> +		system_noc: interconnect@1640000 {
>>> +			reg = <0x0 0x1640000 0x0 0x45080>;
>>> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
>>> +			#interconnect-cells = <1>;
>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>> +		};
>>> +
>>> +		tcsr_mutex: hwlock@1f40000 {
>>> +			compatible = "qcom,tcsr-mutex";
>>> +			reg = <0x0 0x1f40000 0x0 0x20000>;
>>> +			#hwlock-cells = <1>;
>>> +		};
>>> +
>>> +		pdc: interrupt-controller@b220000 {
>>> +			compatible = "qcom,pdc";
>>> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
>>> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
>>> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
>>> +					  <94 609 31>, <125 63 1>;
>>> +			#interrupt-cells = <2>;
>>> +			interrupt-parent = <&intc>;
>>> +			interrupt-controller;
>>> +		};
>>> +
>>> +		spmi_bus: spmi@c400000 {
>>> +			compatible = "qcom,spmi-pmic-arb";
>>> +			reg = <0x0 0xc400000 0x0 0x3000>,
>>> +			      <0x0 0xc500000 0x0 0x400000>,
>>> +			      <0x0 0xc440000 0x0 0x80000>,
>>> +			      <0x0 0xc4c0000 0x0 0x10000>,
>>> +			      <0x0 0xc42d000 0x0 0x4000>;
>>> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>>> +			interrupt-names = "periph_irq";
>>> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>>> +			qcom,ee = <0>;
>>> +			qcom,channel = <0>;
>>> +			#address-cells = <2>;
>>> +			#size-cells = <0>;
>>> +			interrupt-controller;
>>> +			#interrupt-cells = <4>;
>>> +		};
>>> +
>>> +		tlmm: pinctrl@f000000 {
>>> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
>>> +			reg = <0x0 0xf000000 0x0 0x1000000>;
>>> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>>> +			gpio-controller;
>>> +			#gpio-cells = <2>;
>>> +			interrupt-controller;
>>> +			#interrupt-cells = <2>;
>>> +			gpio-ranges = <&tlmm 0 0 151>;
>>> +			wakeup-parent = <&pdc>;
>>> +
>>> +			qup_uart0_default: qup-uart0-default-state {
>>> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
>>> +				function = "qup00";
>>> +			};
>>> +
>>> +			qup_i2c1_data_clk: qup-i2c1-data-clk {
>>> +				pins = "gpio10", "gpio11";
>>> +				function = "qup01";
>>> +				drive-strength = <2>;
>>> +				bias-pull-up;
>>> +			};
>>> +
>>> +			qup_spi1_data_clk: qup-spi1-data-clk {
>>> +				pins = "gpio10", "gpio11", "gpio12";
>>> +				function = "qup01";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi1_cs: qup-spi1-cs {
>>> +				pins = "gpio13";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
>>> +				pins = "gpio12", "gpio13";
>>> +				function = "qup02";
>>> +				drive-strength = <2>;
>>> +				bias-pull-up;
>>> +			};
>>> +
>>> +			qup_spi2_data_clk: qup-spi2-data-clk {
>>> +				pins = "gpio12", "gpio13", "gpio10";
>>> +				function = "qup02";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi2_cs: qup-spi2-cs {
>>> +				pins = "gpio11";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
>>> +				pins = "gpio14", "gpio15";
>>> +				function = "qup03";
>>> +				drive-strength = <2>;
>>> +				bias-pull-up;
>>> +			};
>>> +
>>> +			qup_spi3_data_clk: qup-spi3-data-clk {
>>> +				pins = "gpio14", "gpio15", "gpio16";
>>> +				function = "qup03";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi3_cs: qup-spi3-cs {
>>> +				pins = "gpio17";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
>>> +				pins = "gpio16", "gpio17";
>>> +				function = "qup04";
>>> +				drive-strength = <2>;
>>> +				bias-pull-up;
>>> +			};
>>> +
>>> +			qup_spi4_data_clk: qup-spi4-data-clk {
>>> +				pins = "gpio16", "gpio17", "gpio14";
>>> +				function = "qup04";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi4_cs: qup-spi4-cs {
>>> +				pins = "gpio15";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
>>> +				pins = "gpio130", "gpio131";
>>> +				function = "qup05";
>>> +				drive-strength = <2>;
>>> +				bias-pull-up;
>>> +			};
>>> +
>>> +			qup_spi5_data_clk: qup-spi5-data-clk {
>>> +				pins = "gpio130", "gpio131", "gpio132";
>>> +				function = "qup05";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi5_cs: qup-spi5-cs {
>>> +				pins = "gpio133";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
>>> +				pins = "gpio132", "gpio133";
>>> +				function = "qup06";
>>> +				drive-strength = <2>;
>>> +				bias-pull-up;
>>> +			};
>>> +
>>> +			qup_spi6_data_clk: qup-spi6-data-clk {
>>> +				pins = "gpio132", "gpio133", "gpio130";
>>> +				function = "qup06";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi6_cs: qup-spi6-cs {
>>> +				pins = "gpio131";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_uart7_rx: qup-uart7-rx {
>>> +				pins = "gpio135";
>>> +				function = "qup07";
>>> +				drive-strength = <2>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_uart7_tx: qup-uart7-tx  {
>>> +				pins = "gpio134";
>>> +				function = "qup07";
>>> +				drive-strength = <2>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_uart8_default: qup-uart8-default {
>>> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
>>> +				function = "qup10";
>>> +			};
>>> +
>>> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
>>> +				pins = "gpio22", "gpio23";
>>> +				function = "qup11";
>>> +				drive-strength = <2>;
>>> +				bias-pull-up;
>>> +			};
>>> +
>>> +			qup_spi9_data_clk: qup-spi9-data-clk {
>>> +				pins = "gpio22", "gpio23", "gpio24";
>>> +				function = "qup11";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi9_cs: qup-spi9-cs {
>>> +				pins = "gpio25";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
>>> +				pins = "gpio24", "gpio25";
>>> +				function = "qup12";
>>> +				drive-strength = <2>;
>>> +				bias-pulll-up;
>>> +			};
>>> +
>>> +			qup_spi10_data_clk: qup-spi10-data-clk {
>>> +				pins = "gpio24", "gpio25", "gpio22";
>>> +				function = "qup12";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi10_cs: qup-spi10-cs {
>>> +				pins = "gpio23";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
>>> +				pins = "gpio26", "gpio27";
>>> +				function = "qup13";
>>> +				drive-strength = <2>;
>>> +				bias-pulll-up;
>>> +			};
>>> +
>>> +			qup_spi11_data_clk: qup-spi11-data-clk {
>>> +				pins = "gpio26", "gpio27", "gpio28";
>>> +				function = "qup13";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi11_cs: qup-spi11-cs {
>>> +				pins = "gpio29";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
>>> +				pins = "gpio28", "gpio29";
>>> +				function = "qup14";
>>> +				drive-strength = <2>;
>>> +				bias-pulll-up;
>>> +			};
>>> +
>>> +			qup_spi12_data_clk: qup-spi12-data-clk {
>>> +				pins = "gpio28", "gpio29", "gpio26";
>>> +				function = "qup14";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi12_cs: qup-spi12-cs {
>>> +				pins = "gpio27";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
>>> +				pins = "gpio30", "gpio31";
>>> +				function = "qup15";
>>> +				drive-strength = <2>;
>>> +				bias-pulll-up;
>>> +			};
>>> +
>>> +			qup_spi13_data_clk: qup-spi13-data-clk {
>>> +				pins = "gpio30", "gpio31", "gpio32";
>>> +				function = "qup15";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi13_cs: qup-spi13-cs {
>>> +				pins = "gpio33";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_uart13_default: qup-uart13-default {
>>> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
>>> +				function = "qup15";
>>> +			};
>>> +
>>> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
>>> +				pins = "gpio34", "gpio35";
>>> +				function = "qup16";
>>> +				drive-strength = <2>;
>>> +				bias-pulll-up;
>>> +			};
>>> +
>>> +			qup_spi14_data_clk: qup-spi14-data-clk {
>>> +				pins = "gpio34", "gpio35", "gpio36";
>>> +				function = "qup16";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi14_cs: qup-spi14-cs {
>>> +				pins = "gpio37", "gpio38";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
>>> +				pins = "gpio40", "gpio41";
>>> +				function = "qup17";
>>> +				drive-strength = <2>;
>>> +				bias-pulll-up;
>>> +			};
>>> +
>>> +			qup_spi15_data_clk: qup-spi15-data-clk {
>>> +				pins = "gpio40", "gpio41", "gpio30";
>>> +				function = "qup17";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi15_cs: qup-spi15-cs {
>>> +				pins = "gpio31";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +		};
>>> +
>>> +		apps_smmu: apps-smmu@15000000 {
>>> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
>>> +				"arm,mmu-500";
>>> +			reg = <0x0 0x15000000 0x0 0x100000>;
>>> +			#iommu-cells = <2>;
>>> +			#global-interrupts = <2>;
>>> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
>>> +		};
>>> +
>>> +		intc: interrupt-controller@17200000 {
>>> +			compatible = "arm,gic-v3";
>>> +			#interrupt-cells = <3>;
>>> +			interrupt-controller;
>>> +			#redistributor-regions = <1>;
>>> +			redistributor-stride = <0x0 0x20000>;
>>> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
>>> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
>>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
>>> +		};
>>> +
>>> +		timer@17420000 {
>>> +			compatible = "arm,armv7-timer-mem";
>>> +			#address-cells = <2>;
>>> +			#size-cells = <2>;
>>> +			ranges;
>>> +			reg = <0x0 0x17420000 0x0 0x1000>;
>>> +			clock-frequency = <19200000>;
>>> +
>>> +			frame@17421000 {
>>> +				frame-number = <0>;
>>> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>>> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>>> +				reg = <0x0 0x17421000 0x0 0x1000>,
>>> +				      <0x0 0x17422000 0x0 0x1000>;
>>> +			};
>>> +
>>> +			frame@17423000 {
>>> +				frame-number = <1>;
>>> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>> +				reg = <0x0 0x17423000 0x0 0x1000>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			frame@17425000 {
>>> +				frame-number = <2>;
>>> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>> +				reg = <0x0 0x17425000 0x0 0x1000>,
>>> +				      <0x0 0x17426000 0x0 0x1000>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			frame@17427000 {
>>> +				frame-number = <3>;
>>> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>> +				reg = <0x0 0x17427000 0x0 0x1000>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			frame@17429000 {
>>> +				frame-number = <4>;
>>> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>>> +				reg = <0x0 0x17429000 0x0 0x1000>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			frame@1742b000 {
>>> +				frame-number = <5>;
>>> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>> +				reg = <0x0 0x1742b000 0x0 0x1000>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			frame@1742d000 {
>>> +				frame-number = <6>;
>>> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>> +				reg = <0x0 0x1742d000 0x0 0x1000>;
>>> +				status = "disabled";
>>> +			};
>>> +		};
>>> +
>>> +		apps_rsc: rsc@17a00000 {
>>> +			label = "apps_rsc";
>>> +			compatible = "qcom,rpmh-rsc";
>>> +			reg = <0x0 0x17a00000 0x0 0x10000>,
>>> +			      <0x0 0x17a10000 0x0 0x10000>,
>>> +			      <0x0 0x17a20000 0x0 0x10000>;
>>> +			reg-names = "drv-0", "drv-1", "drv-2";
>>> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>>> +			qcom,tcs-offset = <0xd00>;
>>> +			qcom,drv-id = <2>;
>>> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
>>> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
>>> +
>>> +			apps_bcm_voter: bcm_voter {
>>> +				compatible = "qcom,bcm-voter";
>>> +			};
>>> +
>>> +			rpmhcc: clock-controller {
>>> +				compatible = "qcom,qdu1000-rpmh-clk", "qcom,qru1000-rpmh-clk";
>>> +				#clock-cells = <1>;
>>> +				clock-names = "xo";
>>> +				clocks = <&xo_board>;
>>> +			};
>>> +
>>> +			rpmhpd: power-controller {
>>> +				compatible = "qcom,qdu1000-rpmhpd", "qcom,qru1000-rpmhpd";
>>> +				#power-domain-cells = <1>;
>>> +				operating-points-v2 = <&rpmhpd_opp_table>;
>>> +
>>> +				rpmhpd_opp_table: opp-table {
>>> +					compatible = "operating-points-v2";
>>> +
>>> +					rpmhpd_opp_ret: opp1 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_min_svs: opp2 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_low_svs: opp3 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_svs: opp4 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_svs_l1: opp5 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_nom: opp6 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_nom_l1: opp7 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_nom_l2: opp8 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_turbo: opp9 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_turbo_l1: opp10 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
>>> +					};
>>> +				};
>>> +			};
>>> +		};
>>> +
>>> +		cpufreq_hw: cpufreq@17d91000 {
>>> +			compatible = "qcom, qdu1000-cpufreq-epss", "qcom, qru1000-cpufreq-epss",
>>> +				"qcom,cpufreq-epss";
>>> +			reg = <0x0 0x17d91000 0x0 0x1000>;
>>> +			reg-names = "freq-domain0";
>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
>>> +			clock-names = "xo", "alternate";
>>> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
>>> +			interrupt-names = "dcvsh-irq-0";
>>> +			#freq-domain-cells = <1>;
>>> +		};
>>> +
>>> +		gem_noc: interconnect@19100000 {
>>> +			reg = <0x0 0x19100000 0x0 0xB8080>;
>>> +			compatible = "qcom,qdu1000-gem-noc", "qcom,qru1000-gem-noc";
>>> +			#interconnect-cells = <1>;
>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>> +		};
>>> +
>>> +		arch_timer: timer {
>>> +			compatible = "arm,armv8-timer";
>>> +			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>> +				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>> +				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>> +				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>> +				     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>>> +			clock-frequency = <19200000>;
>>> +		};
>>> +	};
>>> +};
>>> diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>> new file mode 100644
>>> index 000000000000..074fe126e85e
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>> @@ -0,0 +1,27 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +#include "qdu1000.dtsi"
>>> +
>>> +&reserved_memory {
>>> +	/delete-node/ memory@a0000000;
>>> +	/delete-node/ memory@b9600000;
>>> +	/delete-node/ memory@c0000000;
>>> +
>>> +	oem_tenx_mem: memory@a0000000 {
>>> +		no-map;
>>> +		reg = <0x0 0xa0000000 0x0 0x6400000>;
>>> +	};
>>> +
>>> +	mpss_diag_buffer_mem: memory@aea00000 {
>>> +		no-map;
>>> +		reg = <0x0 0xaea00000 0x0 0x6400000>;
>>> +	};
>>> +
>>> +	tenx_q6_buffer_mem: memory@b4e00000 {
>>> +		no-map;
>>> +		reg = <0x0 0xb4e00000 0x0 0x3200000>;
>>> +	};
>>> +};
>>> -- 
>>> 2.38.0
> Thanks,
> Melody

Melody Olvera Oct. 24, 2022, 10:31 p.m. UTC | #16

On 10/24/2022 3:28 PM, Richard Acayan wrote:
>> On 10/23/2022 5:53 PM, Richard Acayan wrote:
>>>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>>>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>>>> to boot to shell with console on these SoCs.
>>>>
>>>> Signed-off-by: Melody Olvera <[e-mail]>
>>>> ---
>>>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>>>  2 files changed, 1673 insertions(+)
>>>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>> new file mode 100644
>>>> index 000000000000..777734b30f56
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>> @@ -0,0 +1,1646 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>>>> +#include <dt-bindings/clock/qcom,rpmh.h>
>>>> +#include <dt-bindings/dma/qcom-gpi.h>
>>>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>>>> +#include <dt-bindings/power/qcom-rpmpd.h>
>>>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>>> +
>>>> +/ {
>>>> +	interrupt-parent = <&intc>;
>>>> +
>>>> +	#address-cells = <2>;
>>>> +	#size-cells = <2>;
>>>> +
>>>> +	chosen: chosen { };
>>>> +
>>>> +	clocks {
>>>> +		xo_board: xo-board {
>>>> +			compatible = "fixed-clock";
>>>> +			clock-frequency = <19200000>;
>>>> +			clock-output-names = "xo_board";
>>>> +			#clock-cells = <0>;
>>>> +		};
>>>> +
>>>> +		sleep_clk: sleep-clk {
>>>> +			compatible = "fixed-clock";
>>>> +			clock-frequency = <32000>;
>>>> +			#clock-cells = <0>;
>>>> +		};
>>>> +	};
>>>> +
>>>> +	cpus {
>>>> +		#address-cells = <2>;
>>>> +		#size-cells = <0>;
>>>> +
>>>> +		CPU0: cpu@0 {
>>>> +			device_type = "cpu";
>>>> +			compatible = "arm,cortex-a55";
>>>> +			reg = <0x0 0x0>;
>>>> +			enable-method = "psci";
>>>> +			power-domain-names = "psci";
>>>> +			power-domains = <&CPU_PD0>;
>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>> +			next-level-cache = <&L2_0>;
>>>> +			L2_0: l2-cache {
>>>> +			      compatible = "cache";
>>>> +			      next-level-cache = <&L3_0>;
>>>> +				L3_0: l3-cache {
>>>> +					compatible = "cache";
>>>> +				};
>>>> +			};
>>>> +		};
>>>> +
>>>> +		CPU1: cpu@100 {
>>>> +			device_type = "cpu";
>>>> +			compatible = "arm,cortex-a55";
>>>> +			reg = <0x0 0x100>;
>>>> +			enable-method = "psci";
>>>> +			power-domains = <&CPU_PD1>;
>>>> +			power-domain-names = "psci";
>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>> +			next-level-cache = <&L2_100>;
>>>> +			L2_100: l2-cache {
>>>> +			      compatible = "cache";
>>>> +			      next-level-cache = <&L3_0>;
>>>> +			};
>>>> +
>>>> +		};
>>>> +
>>>> +		CPU2: cpu@200 {
>>>> +			device_type = "cpu";
>>>> +			compatible = "arm,cortex-a55";
>>>> +			reg = <0x0 0x200>;
>>>> +			enable-method = "psci";
>>>> +			power-domains = <&CPU_PD2>;
>>>> +			power-domain-names = "psci";
>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>> +			next-level-cache = <&L2_200>;
>>>> +			L2_200: l2-cache {
>>>> +			      compatible = "cache";
>>>> +			      next-level-cache = <&L3_0>;
>>>> +			};
>>>> +		};
>>>> +
>>>> +		CPU3: cpu@300 {
>>>> +			device_type = "cpu";
>>>> +			compatible = "arm,cortex-a55";
>>>> +			reg = <0x0 0x300>;
>>>> +			enable-method = "psci";
>>>> +			power-domains = <&CPU_PD3>;
>>>> +			power-domain-names = "psci";
>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>> +			next-level-cache = <&L2_300>;
>>>> +			L2_300: l2-cache {
>>>> +			      compatible = "cache";
>>>> +			      next-level-cache = <&L3_0>;
>>>> +			};
>>>> +
>>>> +		};
>>>> +
>>>> +		cpu-map {
>>>> +			cluster0 {
>>>> +				core0 {
>>>> +					cpu = <&CPU0>;
>>>> +				};
>>>> +
>>>> +				core1 {
>>>> +					cpu = <&CPU1>;
>>>> +				};
>>>> +
>>>> +				core2 {
>>>> +					cpu = <&CPU2>;
>>>> +				};
>>>> +
>>>> +				core3 {
>>>> +					cpu = <&CPU3>;
>>>> +				};
>>>> +			};
>>>> +		};
>>>> +	};
>>>> +
>>>> +	idle-states {
>>>> +		entry-method = "psci";
>>>> +
>>>> +		CPU_OFF: cpu-sleep-0 {
>>>> +			compatible = "arm,idle-state";
>>>> +			idle-state-name = "rail-pc";
>>>> +			entry-latency-us = <274>;
>>>> +			exit-latency-us = <480>;
>>>> +			min-residency-us = <3934>;
>>>> +			arm,psci-suspend-param = <0x40000004>;
>>>> +			local-timer-stop;
>>>> +		};
>>>> +	};
>>>> +
>>>> +	domain-idle-states {
>>>> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
>>>> +			compatible = "domain-idle-state";
>>>> +			idle-state-name = "cluster-l3-off";
>>>> +			entry-latency-us = <584>;
>>>> +			exit-latency-us = <2332>;
>>>> +			min-residency-us = <6118>;
>>>> +			arm,psci-suspend-param = <0x41000044>;
>>>> +		};
>>>> +
>>>> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
>>>> +			compatible = "domain-idle-state";
>>>> +			idle-state-name = "cluster-power-collapse";
>>>> +			entry-latency-us = <2893>;
>>>> +			exit-latency-us = <4023>;
>>>> +			min-residency-us = <9987>;
>>>> +			arm,psci-suspend-param = <0x41003344>;
>>>> +		};
>>>> +	};
>>>> +
>>>> +	firmware {
>>>> +		qcom_scm {
>>>> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
>>>> +			#reset-cells = <1>;
>>>> +		};
>>>> +	};
>>>> +
>>>> +	clk_virt: interconnect-0 {
>>>> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
>>>> +		#interconnect-cells = <2>;
>>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>>> +	};
>>>> +
>>>> +	mc_virt: interconnect-1 {
>>>> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
>>>> +		#interconnect-cells = <2>;
>>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>>> +	};
>>>> +
>>>> +	memory@80000000 {
>>>> +		device_type = "memory";
>>>> +		/* We expect the bootloader to fill in the size */
>>>> +		reg = <0x0 0x80000000 0x0 0x0>;
>>>> +	};
>>>> +
>>>> +	pmu {
>>>> +		compatible = "arm,armv8-pmuv3";
>>>> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>>> +	};
>>>> +
>>>> +	psci {
>>>> +		compatible = "arm,psci-1.0";
>>>> +		method = "smc";
>>>> +
>>>> +		CPU_PD0: cpu-pd0 {
>>>> +			#power-domain-cells = <0>;
>>>> +			power-domains = <&CLUSTER_PD>;
>>>> +			domain-idle-states = <&CPU_OFF>;
>>>> +		};
>>>> +
>>>> +		CPU_PD1: cpu-pd1 {
>>>> +			#power-domain-cells = <0>;
>>>> +			power-domains = <&CLUSTER_PD>;
>>>> +			domain-idle-states = <&CPU_OFF>;
>>>> +		};
>>>> +
>>>> +		CPU_PD2: cpu-pd2 {
>>>> +			#power-domain-cells = <0>;
>>>> +			power-domains = <&CLUSTER_PD>;
>>>> +			domain-idle-states = <&CPU_OFF>;
>>>> +		};
>>>> +
>>>> +		CPU_PD3: cpu-pd3 {
>>>> +			#power-domain-cells = <0>;
>>>> +			power-domains = <&CLUSTER_PD>;
>>>> +			domain-idle-states = <&CPU_OFF>;
>>>> +		};
>>>> +
>>>> +		CLUSTER_PD: cluster-pd {
>>>> +			#power-domain-cells = <0>;
>>>> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
>>>> +		};
>>>> +	};
>>>> +
>>>> +	reserved_memory: reserved-memory {
>>>> +		#address-cells = <2>;
>>>> +		#size-cells = <2>;
>>>> +		ranges;
>>>> +
>>>> +		hyp_mem: memory@80000000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x80000000 0x0 0x600000>;
>>>> +		};
>>>> +
>>>> +		xbl_dt_log_mem: memory@80600000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x80600000 0x0 0x40000>;
>>>> +		};
>>>> +
>>>> +		xbl_ramdump_mem: memory@80640000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
>>>> +		};
>>>> +
>>>> +		aop_image_mem: memory@80800000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x80800000 0x0 0x60000>;
>>>> +		};
>>>> +
>>>> +		aop_cmd_db_mem: memory@80860000 {
>>>> +			compatible = "qcom,cmd-db";
>>>> +			no-map;
>>>> +			reg = <0x0 0x80860000 0x0 0x20000>;
>>>> +		};
>>>> +
>>>> +		aop_config_mem: memory@80880000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x80880000 0x0 0x20000>;
>>>> +		};
>>>> +
>>>> +		tme_crash_dump_mem: memory@808a0000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x808a0000 0x0 0x40000>;
>>>> +		};
>>>> +
>>>> +		tme_log_mem: memory@808e0000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x808e0000 0x0 0x4000>;
>>>> +		};
>>>> +
>>>> +		uefi_log_mem: memory@808e4000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x808e4000 0x0 0x10000>;
>>>> +		};
>>>> +
>>>> +		/* secdata region can be reused by apps */
>>>> +
>>>> +		smem_mem: memory@80900000 {
>>>> +			compatible = "qcom,smem";
>>>> +			no-map;
>>>> +			reg = <0x0 0x80900000 0x0 0x200000>;
>>>> +			hwlocks = <&tcsr_mutex 3>;
>>>> +		};
>>>> +
>>>> +		cpucp_fw_mem: memory@80b00000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x80b00000 0x0 0x100000>;
>>>> +		};
>>>> +
>>>> +		xbl_sc_mem: memory@80c00000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x80c00000 0x0 0x40000>;
>>>> +		};
>>>> +
>>>> +		/* uefi region can be reused by apps */
>>>> +
>>>> +		tz_stat_mem: memory@81d00000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x81d00000 0x0 0x100000>;
>>>> +		};
>>>> +
>>>> +		tags_mem: memory@81e00000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x81e00000 0x0 0x500000>;
>>>> +		};
>>>> +
>>>> +		qtee_mem: memory@82300000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x82300000 0x0 0x500000>;
>>>> +		};
>>>> +
>>>> +		ta_mem: memory@82800000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x82800000 0x0 0xa00000>;
>>>> +		};
>>>> +
>>>> +		fs1_mem: memory@83200000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x83200000 0x0 0x400000>;
>>>> +		};
>>>> +
>>>> +		fs2_mem: memory@83600000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x83600000 0x0 0x400000>;
>>>> +		};
>>>> +
>>>> +		fs3_mem: memory@83a00000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x83a00000 0x0 0x400000>;
>>>> +		};
>>>> +
>>>> +		/* Linux kernel image is loaded at 0x83e00000 */
>>>> +
>>>> +		ipa_fw_mem: memory@8be00000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x8be00000 0x0 0x10000>;
>>>> +		};
>>>> +
>>>> +		ipa_gsi_mem: memory@8be10000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x8be10000 0x0 0x14000>;
>>>> +		};
>>>> +
>>>> +		mpss_mem: memory@8c000000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
>>>> +		};
>>>> +
>>>> +		q6_mpss_dtb_mem: memory@9ec00000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
>>>> +		};
>>>> +
>>>> +		tenx_mem: memory@a0000000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
>>>> +		};
>>>> +
>>>> +		oem_tenx_mem: memory@b9600000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
>>>> +		};
>>>> +
>>>> +		tenx_q6_buffer_mem: memory@c0000000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
>>>> +		};
>>>> +
>>>> +		ipa_buffer_mem: memory@c3200000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
>>>> +		};
>>>> +	};
>>>> +
>>>> +	soc: soc@0 {
>>>> +		#address-cells = <2>;
>>>> +		#size-cells = <2>;
>>>> +		ranges = <0 0 0 0 0x10 0>;
>>>> +		dma-ranges = <0 0 0 0 0x10 0>;
>>>> +		compatible = "simple-bus";
>>>> +
>>>> +		gcc: clock-controller@80000 {
>>>> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
>>>> +			reg = <0x0 0x80000 0x0 0x1f4200>;
>>>> +			#clock-cells = <1>;
>>>> +			#reset-cells = <1>;
>>>> +			#power-domain-cells = <1>;
>>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
>>>> +			clock-names = "bi_tcxo", "sleep_clk";
>>>> +		};
>>>> +
>>>> +		gpi_dma0: dma-controller@900000  {
>>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>>> This won't work if you drop series [1]. It won't just fail the schema checks,
>>> but it would also fail to probe because the driver doesn't recognise it.
>>>
>>> I think you were told to rebase on [2], and didn't change your own series
>>> because it only applied to ee_offset = 0x0. There is another series [3] that
>>> was sent to you, meant for ee_offset = 0x10000. You're expected to change your
>>> patches (in both series you sent) based on what was changed in that series.
>>>
>>> [1] https://lore.kernel.org/linux-arm-msm/[e-mail]/
>>> [2] https://lore.kernel.org/linux-arm-msm/[e-mail]/T/
>>> [3] https://lore.kernel.org/linux-arm-msm/[e-mail]/T/
>> Hi Richard; I was aware of this feedback and was planning to make that change in v3.
>> PS [1] will be dropped and this compatible will be modified similar to PS [3]; that was
>> what I meant by my final comment on [1].
> Ok, I should have checked the date. What about the schema patch? It might be
> helpful for the device tree cleanup efforts if you didn't add a compatible
> without adding a corresponding entry in the device tree bindings.
>
> I'm talking about updating this patch in particular:
>
> https://lore.kernel.org/linux-arm-msm/[e-mail]/
>
> We still add compat strings in dt-bindings even when there is a fallback,
> because the schema is meant to specify every combination of compat strings
> found in the device trees.
That will be dropped as well. I'll use the sdm845 compat string instead of what's here.
>
>>>> +			#dma-cells = <5>;
>>>> +			reg = <0x0 0x900000 0x0 0x60000>;
>>>> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
>>>> +			dma-channels = <12>;
>>>> +			dma-channel-mask = <0x3f>;
>>>> +			iommus = <&apps_smmu 0xf6 0x0>;
>>>> +			status = "ok";
>>>> +		};
>>>> +
>>>> +		qupv3_id_0: geniqup@9c0000 {
>>>> +			compatible = "qcom,geni-se-qup";
>>>> +			reg = <0x0 0x9c0000 0x0 0x2000>;
>>>> +			clock-names = "m-ahb", "s-ahb";
>>>> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>>>> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>>>> +			iommus = <&apps_smmu 0xe3 0x0>;
>>>> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
>>>> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
>>>> +			interconnect-names = "qup-core";
>>>> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
>>>> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
>>>> +			qcom,iommu-dma = "fastmap";
>>>> +			dma-coherent;
>>>> +
>>>> +			#address-cells = <2>;
>>>> +			#size-cells = <2>;
>>>> +			ranges;
>>>> +			status = "disabled";
>>>> +
>>>> +			uart0: serial@980000 {
>>>> +				compatible = "qcom,geni-uart";
>>>> +				reg = <0x0 0x980000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_uart0_default>;
>>>> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c1: i2c@984000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c1_data_clk>;
>>>> +				dmas = <&gpi_dma0 0 1 3 64 0>,
>>>> +					<&gpi_dma0 1 1 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi1: spi@984000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
>>>> +				dmas = <&gpi_dma0 0 1 1 64 0>,
>>>> +					<&gpi_dma0 1 1 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c2: i2c@988000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c2_data_clk>;
>>>> +				dmas = <&gpi_dma0 0 2 3 64 0>,
>>>> +					<&gpi_dma0 1 2 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi2: spi@988000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
>>>> +				dmas = <&gpi_dma0 0 2 1 64 0>,
>>>> +					<&gpi_dma0 1 2 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c3: i2c@98c000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c3_data_clk>;
>>>> +				dmas = <&gpi_dma0 0 3 3 64 0>,
>>>> +					<&gpi_dma0 1 3 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi3: spi@98c000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
>>>> +				dmas = <&gpi_dma0 0 3 1 64 0>,
>>>> +					<&gpi_dma0 1 3 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c4: i2c@990000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c4_data_clk>;
>>>> +				dmas = <&gpi_dma0 0 4 3 64 0>,
>>>> +					<&gpi_dma0 1 4 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi4: spi@990000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
>>>> +				dmas = <&gpi_dma0 0 4 1 64 0>,
>>>> +					<&gpi_dma0 1 4 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c5: i2c@994000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c5_data_clk>;
>>>> +				dmas = <&gpi_dma0 0 5 3 64 0>,
>>>> +					<&gpi_dma0 1 5 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi5: spi@994000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
>>>> +				dmas = <&gpi_dma0 0 5 1 64 0>,
>>>> +					<&gpi_dma0 1 5 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c6: i2c@998000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c6_data_clk>;
>>>> +				dmas = <&gpi_dma0 0 6 3 64 0>,
>>>> +					<&gpi_dma0 1 6 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi6: spi@998000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
>>>> +				dmas = <&gpi_dma0 0 6 1 64 0>,
>>>> +					<&gpi_dma0 1 6 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			uart7: serial@99c000 {
>>>> +				compatible = "qcom,geni-debug-uart";
>>>> +				reg = <0x0 0x99c000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
>>>> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +		};
>>>> +
>>>> +		gpi_dma1: dma-controller@a00000  {
>>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>>> See above.
>>>
>>>> +			#dma-cells = <5>;
>>>> +			reg = <0x0 0xa00000 0x0 0x60000>;
>>>> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
>>>> +			dma-channels = <12>;
>>>> +			dma-channel-mask = <0x3f>;
>>>> +			iommus = <&apps_smmu 0x116 0x0>;
>>>> +			status = "ok";
>>>> +		};
>>>> +
>>>> +		qupv3_id_1: geniqup@ac0000 {
>>>> +			compatible = "qcom,geni-se-qup";
>>>> +			reg = <0x0 0xac0000 0x0 0x2000>;
>>>> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
>>>> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
>>>> +			iommus = <&apps_smmu 0x103 0x0>;
>>>> +			#address-cells = <1>;
>>>> +			#size-cells = <1>;
>>>> +			clock-names = "m-ahb", "s-ahb";
>>>> +
>>>> +			ranges;
>>>> +			status = "disabled";
>>>> +
>>>> +			uart8: serial@a80000 {
>>>> +				compatible = "qcom,geni-uart";
>>>> +				reg = <0x0 0xa80000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_uart8_default>;
>>>> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c9: i2c@a84000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c9_data_clk>;
>>>> +				dmas = <&gpi_dma1 0 1 3 64 0>,
>>>> +					<&gpi_dma1 1 1 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi9: spi@a84000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
>>>> +				dmas = <&gpi_dma1 0 1 1 64 0>,
>>>> +					<&gpi_dma1 1 1 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c10: i2c@a88000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c10_data_clk>;
>>>> +				dmas = <&gpi_dma1 0 2 3 64 0>,
>>>> +					<&gpi_dma1 1 2 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi10: spi@a88000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
>>>> +				dmas = <&gpi_dma1 0 2 1 64 0>,
>>>> +					<&gpi_dma1 1 2 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c11: i2c@a8c000 {
>>>> +				compatible = "qcom,i2c-geni";
>>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c11_data_clk>;
>>>> +				dmas = <&gpi_dma1 0 3 3 64 0>,
>>>> +					<&gpi_dma1 1 3 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi11: spi@a8c000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
>>>> +				dmas = <&gpi_dma1 0 3 1 64 0>,
>>>> +					<&gpi_dma1 1 3 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c12: i2c@a90000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c12_data_clk>;
>>>> +				dmas = <&gpi_dma1 0 4 3 64 0>,
>>>> +					<&gpi_dma1 1 4 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi12: spi@a90000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
>>>> +				dmas = <&gpi_dma1 0 4 1 64 0>,
>>>> +					<&gpi_dma1 1 4 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c13: i2c@a94000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c13_data_clk>;
>>>> +				dmas = <&gpi_dma1 0 5 3 64 0>,
>>>> +					<&gpi_dma1 1 5 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			uart13: serial@a94000 {
>>>> +				compatible = "qcom,geni-uart";
>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_uart13_default>;
>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi13: spi@a94000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
>>>> +				dmas = <&gpi_dma1 0 5 1 64 0>,
>>>> +					<&gpi_dma1 1 5 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c14: i2c@a98000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c14_data_clk>;
>>>> +				dmas = <&gpi_dma1 0 6 3 64 0>,
>>>> +					<&gpi_dma1 1 6 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi14: spi@a98000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
>>>> +				dmas = <&gpi_dma1 0 6 1 64 0>,
>>>> +					<&gpi_dma1 1 6 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c15: i2c@a9c000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c15_data_clk>;
>>>> +				dmas = <&gpi_dma1 0 7 3 64 0>,
>>>> +					<&gpi_dma1 1 7 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi15: spi@a9c000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
>>>> +				dmas = <&gpi_dma1 0 7 1 64 0>,
>>>> +					<&gpi_dma1 1 7 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +		};
>>>> +
>>>> +		system_noc: interconnect@1640000 {
>>>> +			reg = <0x0 0x1640000 0x0 0x45080>;
>>>> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
>>>> +			#interconnect-cells = <1>;
>>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>>> +		};
>>>> +
>>>> +		tcsr_mutex: hwlock@1f40000 {
>>>> +			compatible = "qcom,tcsr-mutex";
>>>> +			reg = <0x0 0x1f40000 0x0 0x20000>;
>>>> +			#hwlock-cells = <1>;
>>>> +		};
>>>> +
>>>> +		pdc: interrupt-controller@b220000 {
>>>> +			compatible = "qcom,pdc";
>>>> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
>>>> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
>>>> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
>>>> +					  <94 609 31>, <125 63 1>;
>>>> +			#interrupt-cells = <2>;
>>>> +			interrupt-parent = <&intc>;
>>>> +			interrupt-controller;
>>>> +		};
>>>> +
>>>> +		spmi_bus: spmi@c400000 {
>>>> +			compatible = "qcom,spmi-pmic-arb";
>>>> +			reg = <0x0 0xc400000 0x0 0x3000>,
>>>> +			      <0x0 0xc500000 0x0 0x400000>,
>>>> +			      <0x0 0xc440000 0x0 0x80000>,
>>>> +			      <0x0 0xc4c0000 0x0 0x10000>,
>>>> +			      <0x0 0xc42d000 0x0 0x4000>;
>>>> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>>>> +			interrupt-names = "periph_irq";
>>>> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>>>> +			qcom,ee = <0>;
>>>> +			qcom,channel = <0>;
>>>> +			#address-cells = <2>;
>>>> +			#size-cells = <0>;
>>>> +			interrupt-controller;
>>>> +			#interrupt-cells = <4>;
>>>> +		};
>>>> +
>>>> +		tlmm: pinctrl@f000000 {
>>>> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
>>>> +			reg = <0x0 0xf000000 0x0 0x1000000>;
>>>> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>>>> +			gpio-controller;
>>>> +			#gpio-cells = <2>;
>>>> +			interrupt-controller;
>>>> +			#interrupt-cells = <2>;
>>>> +			gpio-ranges = <&tlmm 0 0 151>;
>>>> +			wakeup-parent = <&pdc>;
>>>> +
>>>> +			qup_uart0_default: qup-uart0-default-state {
>>>> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
>>>> +				function = "qup00";
>>>> +			};
>>>> +
>>>> +			qup_i2c1_data_clk: qup-i2c1-data-clk {
>>>> +				pins = "gpio10", "gpio11";
>>>> +				function = "qup01";
>>>> +				drive-strength = <2>;
>>>> +				bias-pull-up;
>>>> +			};
>>>> +
>>>> +			qup_spi1_data_clk: qup-spi1-data-clk {
>>>> +				pins = "gpio10", "gpio11", "gpio12";
>>>> +				function = "qup01";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi1_cs: qup-spi1-cs {
>>>> +				pins = "gpio13";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
>>>> +				pins = "gpio12", "gpio13";
>>>> +				function = "qup02";
>>>> +				drive-strength = <2>;
>>>> +				bias-pull-up;
>>>> +			};
>>>> +
>>>> +			qup_spi2_data_clk: qup-spi2-data-clk {
>>>> +				pins = "gpio12", "gpio13", "gpio10";
>>>> +				function = "qup02";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi2_cs: qup-spi2-cs {
>>>> +				pins = "gpio11";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
>>>> +				pins = "gpio14", "gpio15";
>>>> +				function = "qup03";
>>>> +				drive-strength = <2>;
>>>> +				bias-pull-up;
>>>> +			};
>>>> +
>>>> +			qup_spi3_data_clk: qup-spi3-data-clk {
>>>> +				pins = "gpio14", "gpio15", "gpio16";
>>>> +				function = "qup03";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi3_cs: qup-spi3-cs {
>>>> +				pins = "gpio17";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
>>>> +				pins = "gpio16", "gpio17";
>>>> +				function = "qup04";
>>>> +				drive-strength = <2>;
>>>> +				bias-pull-up;
>>>> +			};
>>>> +
>>>> +			qup_spi4_data_clk: qup-spi4-data-clk {
>>>> +				pins = "gpio16", "gpio17", "gpio14";
>>>> +				function = "qup04";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi4_cs: qup-spi4-cs {
>>>> +				pins = "gpio15";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
>>>> +				pins = "gpio130", "gpio131";
>>>> +				function = "qup05";
>>>> +				drive-strength = <2>;
>>>> +				bias-pull-up;
>>>> +			};
>>>> +
>>>> +			qup_spi5_data_clk: qup-spi5-data-clk {
>>>> +				pins = "gpio130", "gpio131", "gpio132";
>>>> +				function = "qup05";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi5_cs: qup-spi5-cs {
>>>> +				pins = "gpio133";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
>>>> +				pins = "gpio132", "gpio133";
>>>> +				function = "qup06";
>>>> +				drive-strength = <2>;
>>>> +				bias-pull-up;
>>>> +			};
>>>> +
>>>> +			qup_spi6_data_clk: qup-spi6-data-clk {
>>>> +				pins = "gpio132", "gpio133", "gpio130";
>>>> +				function = "qup06";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi6_cs: qup-spi6-cs {
>>>> +				pins = "gpio131";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_uart7_rx: qup-uart7-rx {
>>>> +				pins = "gpio135";
>>>> +				function = "qup07";
>>>> +				drive-strength = <2>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_uart7_tx: qup-uart7-tx  {
>>>> +				pins = "gpio134";
>>>> +				function = "qup07";
>>>> +				drive-strength = <2>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_uart8_default: qup-uart8-default {
>>>> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
>>>> +				function = "qup10";
>>>> +			};
>>>> +
>>>> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
>>>> +				pins = "gpio22", "gpio23";
>>>> +				function = "qup11";
>>>> +				drive-strength = <2>;
>>>> +				bias-pull-up;
>>>> +			};
>>>> +
>>>> +			qup_spi9_data_clk: qup-spi9-data-clk {
>>>> +				pins = "gpio22", "gpio23", "gpio24";
>>>> +				function = "qup11";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi9_cs: qup-spi9-cs {
>>>> +				pins = "gpio25";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
>>>> +				pins = "gpio24", "gpio25";
>>>> +				function = "qup12";
>>>> +				drive-strength = <2>;
>>>> +				bias-pulll-up;
>>>> +			};
>>>> +
>>>> +			qup_spi10_data_clk: qup-spi10-data-clk {
>>>> +				pins = "gpio24", "gpio25", "gpio22";
>>>> +				function = "qup12";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi10_cs: qup-spi10-cs {
>>>> +				pins = "gpio23";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
>>>> +				pins = "gpio26", "gpio27";
>>>> +				function = "qup13";
>>>> +				drive-strength = <2>;
>>>> +				bias-pulll-up;
>>>> +			};
>>>> +
>>>> +			qup_spi11_data_clk: qup-spi11-data-clk {
>>>> +				pins = "gpio26", "gpio27", "gpio28";
>>>> +				function = "qup13";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi11_cs: qup-spi11-cs {
>>>> +				pins = "gpio29";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
>>>> +				pins = "gpio28", "gpio29";
>>>> +				function = "qup14";
>>>> +				drive-strength = <2>;
>>>> +				bias-pulll-up;
>>>> +			};
>>>> +
>>>> +			qup_spi12_data_clk: qup-spi12-data-clk {
>>>> +				pins = "gpio28", "gpio29", "gpio26";
>>>> +				function = "qup14";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi12_cs: qup-spi12-cs {
>>>> +				pins = "gpio27";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
>>>> +				pins = "gpio30", "gpio31";
>>>> +				function = "qup15";
>>>> +				drive-strength = <2>;
>>>> +				bias-pulll-up;
>>>> +			};
>>>> +
>>>> +			qup_spi13_data_clk: qup-spi13-data-clk {
>>>> +				pins = "gpio30", "gpio31", "gpio32";
>>>> +				function = "qup15";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi13_cs: qup-spi13-cs {
>>>> +				pins = "gpio33";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_uart13_default: qup-uart13-default {
>>>> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
>>>> +				function = "qup15";
>>>> +			};
>>>> +
>>>> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
>>>> +				pins = "gpio34", "gpio35";
>>>> +				function = "qup16";
>>>> +				drive-strength = <2>;
>>>> +				bias-pulll-up;
>>>> +			};
>>>> +
>>>> +			qup_spi14_data_clk: qup-spi14-data-clk {
>>>> +				pins = "gpio34", "gpio35", "gpio36";
>>>> +				function = "qup16";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi14_cs: qup-spi14-cs {
>>>> +				pins = "gpio37", "gpio38";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
>>>> +				pins = "gpio40", "gpio41";
>>>> +				function = "qup17";
>>>> +				drive-strength = <2>;
>>>> +				bias-pulll-up;
>>>> +			};
>>>> +
>>>> +			qup_spi15_data_clk: qup-spi15-data-clk {
>>>> +				pins = "gpio40", "gpio41", "gpio30";
>>>> +				function = "qup17";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi15_cs: qup-spi15-cs {
>>>> +				pins = "gpio31";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +		};
>>>> +
>>>> +		apps_smmu: apps-smmu@15000000 {
>>>> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
>>>> +				"arm,mmu-500";
>>>> +			reg = <0x0 0x15000000 0x0 0x100000>;
>>>> +			#iommu-cells = <2>;
>>>> +			#global-interrupts = <2>;
>>>> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
>>>> +		};
>>>> +
>>>> +		intc: interrupt-controller@17200000 {
>>>> +			compatible = "arm,gic-v3";
>>>> +			#interrupt-cells = <3>;
>>>> +			interrupt-controller;
>>>> +			#redistributor-regions = <1>;
>>>> +			redistributor-stride = <0x0 0x20000>;
>>>> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
>>>> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
>>>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
>>>> +		};
>>>> +
>>>> +		timer@17420000 {
>>>> +			compatible = "arm,armv7-timer-mem";
>>>> +			#address-cells = <2>;
>>>> +			#size-cells = <2>;
>>>> +			ranges;
>>>> +			reg = <0x0 0x17420000 0x0 0x1000>;
>>>> +			clock-frequency = <19200000>;
>>>> +
>>>> +			frame@17421000 {
>>>> +				frame-number = <0>;
>>>> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				reg = <0x0 0x17421000 0x0 0x1000>,
>>>> +				      <0x0 0x17422000 0x0 0x1000>;
>>>> +			};
>>>> +
>>>> +			frame@17423000 {
>>>> +				frame-number = <1>;
>>>> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				reg = <0x0 0x17423000 0x0 0x1000>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			frame@17425000 {
>>>> +				frame-number = <2>;
>>>> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				reg = <0x0 0x17425000 0x0 0x1000>,
>>>> +				      <0x0 0x17426000 0x0 0x1000>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			frame@17427000 {
>>>> +				frame-number = <3>;
>>>> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				reg = <0x0 0x17427000 0x0 0x1000>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			frame@17429000 {
>>>> +				frame-number = <4>;
>>>> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				reg = <0x0 0x17429000 0x0 0x1000>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			frame@1742b000 {
>>>> +				frame-number = <5>;
>>>> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				reg = <0x0 0x1742b000 0x0 0x1000>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			frame@1742d000 {
>>>> +				frame-number = <6>;
>>>> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				reg = <0x0 0x1742d000 0x0 0x1000>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +		};
>>>> +
>>>> +		apps_rsc: rsc@17a00000 {
>>>> +			label = "apps_rsc";
>>>> +			compatible = "qcom,rpmh-rsc";
>>>> +			reg = <0x0 0x17a00000 0x0 0x10000>,
>>>> +			      <0x0 0x17a10000 0x0 0x10000>,
>>>> +			      <0x0 0x17a20000 0x0 0x10000>;
>>>> +			reg-names = "drv-0", "drv-1", "drv-2";
>>>> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>>>> +			qcom,tcs-offset = <0xd00>;
>>>> +			qcom,drv-id = <2>;
>>>> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
>>>> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
>>>> +
>>>> +			apps_bcm_voter: bcm_voter {
>>>> +				compatible = "qcom,bcm-voter";
>>>> +			};
>>>> +
>>>> +			rpmhcc: clock-controller {
>>>> +				compatible = "qcom,qdu1000-rpmh-clk", "qcom,qru1000-rpmh-clk";
>>>> +				#clock-cells = <1>;
>>>> +				clock-names = "xo";
>>>> +				clocks = <&xo_board>;
>>>> +			};
>>>> +
>>>> +			rpmhpd: power-controller {
>>>> +				compatible = "qcom,qdu1000-rpmhpd", "qcom,qru1000-rpmhpd";
>>>> +				#power-domain-cells = <1>;
>>>> +				operating-points-v2 = <&rpmhpd_opp_table>;
>>>> +
>>>> +				rpmhpd_opp_table: opp-table {
>>>> +					compatible = "operating-points-v2";
>>>> +
>>>> +					rpmhpd_opp_ret: opp1 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_min_svs: opp2 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_low_svs: opp3 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_svs: opp4 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_svs_l1: opp5 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_nom: opp6 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_nom_l1: opp7 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_nom_l2: opp8 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_turbo: opp9 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_turbo_l1: opp10 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
>>>> +					};
>>>> +				};
>>>> +			};
>>>> +		};
>>>> +
>>>> +		cpufreq_hw: cpufreq@17d91000 {
>>>> +			compatible = "qcom, qdu1000-cpufreq-epss", "qcom, qru1000-cpufreq-epss",
>>>> +				"qcom,cpufreq-epss";
>>>> +			reg = <0x0 0x17d91000 0x0 0x1000>;
>>>> +			reg-names = "freq-domain0";
>>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
>>>> +			clock-names = "xo", "alternate";
>>>> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
>>>> +			interrupt-names = "dcvsh-irq-0";
>>>> +			#freq-domain-cells = <1>;
>>>> +		};
>>>> +
>>>> +		gem_noc: interconnect@19100000 {
>>>> +			reg = <0x0 0x19100000 0x0 0xB8080>;
>>>> +			compatible = "qcom,qdu1000-gem-noc", "qcom,qru1000-gem-noc";
>>>> +			#interconnect-cells = <1>;
>>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>>> +		};
>>>> +
>>>> +		arch_timer: timer {
>>>> +			compatible = "arm,armv8-timer";
>>>> +			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> +				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> +				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> +				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> +				     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>>>> +			clock-frequency = <19200000>;
>>>> +		};
>>>> +	};
>>>> +};
>>>> diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>> new file mode 100644
>>>> index 000000000000..074fe126e85e
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>> @@ -0,0 +1,27 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +#include "qdu1000.dtsi"
>>>> +
>>>> +&reserved_memory {
>>>> +	/delete-node/ memory@a0000000;
>>>> +	/delete-node/ memory@b9600000;
>>>> +	/delete-node/ memory@c0000000;
>>>> +
>>>> +	oem_tenx_mem: memory@a0000000 {
>>>> +		no-map;
>>>> +		reg = <0x0 0xa0000000 0x0 0x6400000>;
>>>> +	};
>>>> +
>>>> +	mpss_diag_buffer_mem: memory@aea00000 {
>>>> +		no-map;
>>>> +		reg = <0x0 0xaea00000 0x0 0x6400000>;
>>>> +	};
>>>> +
>>>> +	tenx_q6_buffer_mem: memory@b4e00000 {
>>>> +		no-map;
>>>> +		reg = <0x0 0xb4e00000 0x0 0x3200000>;
>>>> +	};
>>>> +};
>>>> -- 
>>>> 2.38.0
>> Thanks,
>> Melody

Richard Acayan Oct. 24, 2022, 10:51 p.m. UTC | #17

> On 10/24/2022 3:28 PM, Richard Acayan wrote:
>>> On 10/23/2022 5:53 PM, Richard Acayan wrote:
>>>>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>>>>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>>>>> to boot to shell with console on these SoCs.
>>>>>
>>>>> Signed-off-by: Melody Olvera <[e-mail]>
>>>>> ---
>>>>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>>>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>>>>  2 files changed, 1673 insertions(+)
>>>>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>>> new file mode 100644
>>>>> index 000000000000..777734b30f56
>>>>> --- /dev/null
>>>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>>> @@ -0,0 +1,1646 @@
>>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>>> +/*
>>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>>>> + */
>>>>> +
>>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>>>>> +#include <dt-bindings/clock/qcom,rpmh.h>
>>>>> +#include <dt-bindings/dma/qcom-gpi.h>
>>>>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>>>>> +#include <dt-bindings/power/qcom-rpmpd.h>
>>>>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>>>> +
>>>>> +/ {
>>>>> +	interrupt-parent = <&intc>;
>>>>> +
>>>>> +	#address-cells = <2>;
>>>>> +	#size-cells = <2>;
>>>>> +
>>>>> +	chosen: chosen { };
>>>>> +
>>>>> +	clocks {
>>>>> +		xo_board: xo-board {
>>>>> +			compatible = "fixed-clock";
>>>>> +			clock-frequency = <19200000>;
>>>>> +			clock-output-names = "xo_board";
>>>>> +			#clock-cells = <0>;
>>>>> +		};
>>>>> +
>>>>> +		sleep_clk: sleep-clk {
>>>>> +			compatible = "fixed-clock";
>>>>> +			clock-frequency = <32000>;
>>>>> +			#clock-cells = <0>;
>>>>> +		};
>>>>> +	};
>>>>> +
>>>>> +	cpus {
>>>>> +		#address-cells = <2>;
>>>>> +		#size-cells = <0>;
>>>>> +
>>>>> +		CPU0: cpu@0 {
>>>>> +			device_type = "cpu";
>>>>> +			compatible = "arm,cortex-a55";
>>>>> +			reg = <0x0 0x0>;
>>>>> +			enable-method = "psci";
>>>>> +			power-domain-names = "psci";
>>>>> +			power-domains = <&CPU_PD0>;
>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>> +			next-level-cache = <&L2_0>;
>>>>> +			L2_0: l2-cache {
>>>>> +			      compatible = "cache";
>>>>> +			      next-level-cache = <&L3_0>;
>>>>> +				L3_0: l3-cache {
>>>>> +					compatible = "cache";
>>>>> +				};
>>>>> +			};
>>>>> +		};
>>>>> +
>>>>> +		CPU1: cpu@100 {
>>>>> +			device_type = "cpu";
>>>>> +			compatible = "arm,cortex-a55";
>>>>> +			reg = <0x0 0x100>;
>>>>> +			enable-method = "psci";
>>>>> +			power-domains = <&CPU_PD1>;
>>>>> +			power-domain-names = "psci";
>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>> +			next-level-cache = <&L2_100>;
>>>>> +			L2_100: l2-cache {
>>>>> +			      compatible = "cache";
>>>>> +			      next-level-cache = <&L3_0>;
>>>>> +			};
>>>>> +
>>>>> +		};
>>>>> +
>>>>> +		CPU2: cpu@200 {
>>>>> +			device_type = "cpu";
>>>>> +			compatible = "arm,cortex-a55";
>>>>> +			reg = <0x0 0x200>;
>>>>> +			enable-method = "psci";
>>>>> +			power-domains = <&CPU_PD2>;
>>>>> +			power-domain-names = "psci";
>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>> +			next-level-cache = <&L2_200>;
>>>>> +			L2_200: l2-cache {
>>>>> +			      compatible = "cache";
>>>>> +			      next-level-cache = <&L3_0>;
>>>>> +			};
>>>>> +		};
>>>>> +
>>>>> +		CPU3: cpu@300 {
>>>>> +			device_type = "cpu";
>>>>> +			compatible = "arm,cortex-a55";
>>>>> +			reg = <0x0 0x300>;
>>>>> +			enable-method = "psci";
>>>>> +			power-domains = <&CPU_PD3>;
>>>>> +			power-domain-names = "psci";
>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>> +			next-level-cache = <&L2_300>;
>>>>> +			L2_300: l2-cache {
>>>>> +			      compatible = "cache";
>>>>> +			      next-level-cache = <&L3_0>;
>>>>> +			};
>>>>> +
>>>>> +		};
>>>>> +
>>>>> +		cpu-map {
>>>>> +			cluster0 {
>>>>> +				core0 {
>>>>> +					cpu = <&CPU0>;
>>>>> +				};
>>>>> +
>>>>> +				core1 {
>>>>> +					cpu = <&CPU1>;
>>>>> +				};
>>>>> +
>>>>> +				core2 {
>>>>> +					cpu = <&CPU2>;
>>>>> +				};
>>>>> +
>>>>> +				core3 {
>>>>> +					cpu = <&CPU3>;
>>>>> +				};
>>>>> +			};
>>>>> +		};
>>>>> +	};
>>>>> +
>>>>> +	idle-states {
>>>>> +		entry-method = "psci";
>>>>> +
>>>>> +		CPU_OFF: cpu-sleep-0 {
>>>>> +			compatible = "arm,idle-state";
>>>>> +			idle-state-name = "rail-pc";
>>>>> +			entry-latency-us = <274>;
>>>>> +			exit-latency-us = <480>;
>>>>> +			min-residency-us = <3934>;
>>>>> +			arm,psci-suspend-param = <0x40000004>;
>>>>> +			local-timer-stop;
>>>>> +		};
>>>>> +	};
>>>>> +
>>>>> +	domain-idle-states {
>>>>> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
>>>>> +			compatible = "domain-idle-state";
>>>>> +			idle-state-name = "cluster-l3-off";
>>>>> +			entry-latency-us = <584>;
>>>>> +			exit-latency-us = <2332>;
>>>>> +			min-residency-us = <6118>;
>>>>> +			arm,psci-suspend-param = <0x41000044>;
>>>>> +		};
>>>>> +
>>>>> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
>>>>> +			compatible = "domain-idle-state";
>>>>> +			idle-state-name = "cluster-power-collapse";
>>>>> +			entry-latency-us = <2893>;
>>>>> +			exit-latency-us = <4023>;
>>>>> +			min-residency-us = <9987>;
>>>>> +			arm,psci-suspend-param = <0x41003344>;
>>>>> +		};
>>>>> +	};
>>>>> +
>>>>> +	firmware {
>>>>> +		qcom_scm {
>>>>> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
>>>>> +			#reset-cells = <1>;
>>>>> +		};
>>>>> +	};
>>>>> +
>>>>> +	clk_virt: interconnect-0 {
>>>>> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
>>>>> +		#interconnect-cells = <2>;
>>>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>>>> +	};
>>>>> +
>>>>> +	mc_virt: interconnect-1 {
>>>>> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
>>>>> +		#interconnect-cells = <2>;
>>>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>>>> +	};
>>>>> +
>>>>> +	memory@80000000 {
>>>>> +		device_type = "memory";
>>>>> +		/* We expect the bootloader to fill in the size */
>>>>> +		reg = <0x0 0x80000000 0x0 0x0>;
>>>>> +	};
>>>>> +
>>>>> +	pmu {
>>>>> +		compatible = "arm,armv8-pmuv3";
>>>>> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +	};
>>>>> +
>>>>> +	psci {
>>>>> +		compatible = "arm,psci-1.0";
>>>>> +		method = "smc";
>>>>> +
>>>>> +		CPU_PD0: cpu-pd0 {
>>>>> +			#power-domain-cells = <0>;
>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>> +		};
>>>>> +
>>>>> +		CPU_PD1: cpu-pd1 {
>>>>> +			#power-domain-cells = <0>;
>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>> +		};
>>>>> +
>>>>> +		CPU_PD2: cpu-pd2 {
>>>>> +			#power-domain-cells = <0>;
>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>> +		};
>>>>> +
>>>>> +		CPU_PD3: cpu-pd3 {
>>>>> +			#power-domain-cells = <0>;
>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>> +		};
>>>>> +
>>>>> +		CLUSTER_PD: cluster-pd {
>>>>> +			#power-domain-cells = <0>;
>>>>> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
>>>>> +		};
>>>>> +	};
>>>>> +
>>>>> +	reserved_memory: reserved-memory {
>>>>> +		#address-cells = <2>;
>>>>> +		#size-cells = <2>;
>>>>> +		ranges;
>>>>> +
>>>>> +		hyp_mem: memory@80000000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80000000 0x0 0x600000>;
>>>>> +		};
>>>>> +
>>>>> +		xbl_dt_log_mem: memory@80600000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80600000 0x0 0x40000>;
>>>>> +		};
>>>>> +
>>>>> +		xbl_ramdump_mem: memory@80640000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
>>>>> +		};
>>>>> +
>>>>> +		aop_image_mem: memory@80800000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80800000 0x0 0x60000>;
>>>>> +		};
>>>>> +
>>>>> +		aop_cmd_db_mem: memory@80860000 {
>>>>> +			compatible = "qcom,cmd-db";
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80860000 0x0 0x20000>;
>>>>> +		};
>>>>> +
>>>>> +		aop_config_mem: memory@80880000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80880000 0x0 0x20000>;
>>>>> +		};
>>>>> +
>>>>> +		tme_crash_dump_mem: memory@808a0000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x808a0000 0x0 0x40000>;
>>>>> +		};
>>>>> +
>>>>> +		tme_log_mem: memory@808e0000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x808e0000 0x0 0x4000>;
>>>>> +		};
>>>>> +
>>>>> +		uefi_log_mem: memory@808e4000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x808e4000 0x0 0x10000>;
>>>>> +		};
>>>>> +
>>>>> +		/* secdata region can be reused by apps */
>>>>> +
>>>>> +		smem_mem: memory@80900000 {
>>>>> +			compatible = "qcom,smem";
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80900000 0x0 0x200000>;
>>>>> +			hwlocks = <&tcsr_mutex 3>;
>>>>> +		};
>>>>> +
>>>>> +		cpucp_fw_mem: memory@80b00000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80b00000 0x0 0x100000>;
>>>>> +		};
>>>>> +
>>>>> +		xbl_sc_mem: memory@80c00000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80c00000 0x0 0x40000>;
>>>>> +		};
>>>>> +
>>>>> +		/* uefi region can be reused by apps */
>>>>> +
>>>>> +		tz_stat_mem: memory@81d00000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x81d00000 0x0 0x100000>;
>>>>> +		};
>>>>> +
>>>>> +		tags_mem: memory@81e00000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x81e00000 0x0 0x500000>;
>>>>> +		};
>>>>> +
>>>>> +		qtee_mem: memory@82300000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x82300000 0x0 0x500000>;
>>>>> +		};
>>>>> +
>>>>> +		ta_mem: memory@82800000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x82800000 0x0 0xa00000>;
>>>>> +		};
>>>>> +
>>>>> +		fs1_mem: memory@83200000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x83200000 0x0 0x400000>;
>>>>> +		};
>>>>> +
>>>>> +		fs2_mem: memory@83600000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x83600000 0x0 0x400000>;
>>>>> +		};
>>>>> +
>>>>> +		fs3_mem: memory@83a00000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x83a00000 0x0 0x400000>;
>>>>> +		};
>>>>> +
>>>>> +		/* Linux kernel image is loaded at 0x83e00000 */
>>>>> +
>>>>> +		ipa_fw_mem: memory@8be00000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x8be00000 0x0 0x10000>;
>>>>> +		};
>>>>> +
>>>>> +		ipa_gsi_mem: memory@8be10000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x8be10000 0x0 0x14000>;
>>>>> +		};
>>>>> +
>>>>> +		mpss_mem: memory@8c000000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
>>>>> +		};
>>>>> +
>>>>> +		q6_mpss_dtb_mem: memory@9ec00000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
>>>>> +		};
>>>>> +
>>>>> +		tenx_mem: memory@a0000000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
>>>>> +		};
>>>>> +
>>>>> +		oem_tenx_mem: memory@b9600000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
>>>>> +		};
>>>>> +
>>>>> +		tenx_q6_buffer_mem: memory@c0000000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
>>>>> +		};
>>>>> +
>>>>> +		ipa_buffer_mem: memory@c3200000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
>>>>> +		};
>>>>> +	};
>>>>> +
>>>>> +	soc: soc@0 {
>>>>> +		#address-cells = <2>;
>>>>> +		#size-cells = <2>;
>>>>> +		ranges = <0 0 0 0 0x10 0>;
>>>>> +		dma-ranges = <0 0 0 0 0x10 0>;
>>>>> +		compatible = "simple-bus";
>>>>> +
>>>>> +		gcc: clock-controller@80000 {
>>>>> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
>>>>> +			reg = <0x0 0x80000 0x0 0x1f4200>;
>>>>> +			#clock-cells = <1>;
>>>>> +			#reset-cells = <1>;
>>>>> +			#power-domain-cells = <1>;
>>>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
>>>>> +			clock-names = "bi_tcxo", "sleep_clk";
>>>>> +		};
>>>>> +
>>>>> +		gpi_dma0: dma-controller@900000  {
>>>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>>>> This won't work if you drop series [1]. It won't just fail the schema checks,
>>>> but it would also fail to probe because the driver doesn't recognise it.
>>>>
>>>> I think you were told to rebase on [2], and didn't change your own series
>>>> because it only applied to ee_offset = 0x0. There is another series [3] that
>>>> was sent to you, meant for ee_offset = 0x10000. You're expected to change your
>>>> patches (in both series you sent) based on what was changed in that series.
>>>>
>>>> [1] https://lore.kernel.org/linux-arm-msm/[e-mail]/
>>>> [2] https://lore.kernel.org/linux-arm-msm/[e-mail]/T/
>>>> [3] https://lore.kernel.org/linux-arm-msm/[e-mail]/T/
>>> Hi Richard; I was aware of this feedback and was planning to make that change in v3.
>>> PS [1] will be dropped and this compatible will be modified similar to PS [3]; that was
>>> what I meant by my final comment on [1].
>> Ok, I should have checked the date. What about the schema patch? It might be
>> helpful for the device tree cleanup efforts if you didn't add a compatible
>> without adding a corresponding entry in the device tree bindings.
>>
>> I'm talking about updating this patch in particular:
>>
>> https://lore.kernel.org/linux-arm-msm/[e-mail]/
>>
>> We still add compat strings in dt-bindings even when there is a fallback,
>> because the schema is meant to specify every combination of compat strings
>> found in the device trees.
> That will be dropped as well. I'll use the sdm845 compat string instead of what's here.

I hope you're talking about sm6350, because sdm845 has an ee_offset of 0. But if
you think the maintainers will accept this, then it shouldn't be a problem. I
just thought that you would copy what the other platforms are doing, which
required a schema patch.

Example:

Documentation/devicetree/bindings/dma/qcom,gpi.yaml:

    properties:
      compatible:
        oneOf:
          - enum:
              - qcom,sdm845-gpi-dma
              - qcom,sm6350-gpi-dma
          - items:
              - enum:
                  - qcom,qdu1000-gpi-dma
                  - qcom,sc7280-gpi-dma
                  - qcom,sm8350-gpi-dma
                  - qcom,sm8450-gpi-dma
              - const: qcom,sm6350-gpi-dma

and

    compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";

would pass schema checks.

Documentation/devicetree/bindings/dma/qcom,gpi.yaml:

    properties:
      compatible:
        oneOf:
          - enum:
              - qcom,sdm845-gpi-dma
              - qcom,sm6350-gpi-dma
          - items:
              - enum:
                  - qcom,sc7280-gpi-dma
                  - qcom,sm8350-gpi-dma
                  - qcom,sm8450-gpi-dma
              - const: qcom,sm6350-gpi-dma

and

    compatible = "qcom,sm6350-gpi-dma";

would also pass schema checks.

Documentation/devicetree/bindings/dma/qcom,gpi.yaml:

    properties:
      compatible:
        oneOf:
          - enum:
              - qcom,sdm845-gpi-dma
              - qcom,sm6350-gpi-dma
          - items:
              - enum:
                  - qcom,sc7280-gpi-dma
                  - qcom,sm8350-gpi-dma
                  - qcom,sm8450-gpi-dma
              - const: qcom,sm6350-gpi-dma

and

    compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";

would not pass schema checks.

>>
>>>>> +			#dma-cells = <5>;
>>>>> +			reg = <0x0 0x900000 0x0 0x60000>;
>>>>> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +			dma-channels = <12>;
>>>>> +			dma-channel-mask = <0x3f>;
>>>>> +			iommus = <&apps_smmu 0xf6 0x0>;
>>>>> +			status = "ok";
>>>>> +		};
>>>>> +
>>>>> +		qupv3_id_0: geniqup@9c0000 {
>>>>> +			compatible = "qcom,geni-se-qup";
>>>>> +			reg = <0x0 0x9c0000 0x0 0x2000>;
>>>>> +			clock-names = "m-ahb", "s-ahb";
>>>>> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>>>>> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>>>>> +			iommus = <&apps_smmu 0xe3 0x0>;
>>>>> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
>>>>> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
>>>>> +			interconnect-names = "qup-core";
>>>>> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
>>>>> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
>>>>> +			qcom,iommu-dma = "fastmap";
>>>>> +			dma-coherent;
>>>>> +
>>>>> +			#address-cells = <2>;
>>>>> +			#size-cells = <2>;
>>>>> +			ranges;
>>>>> +			status = "disabled";
>>>>> +
>>>>> +			uart0: serial@980000 {
>>>>> +				compatible = "qcom,geni-uart";
>>>>> +				reg = <0x0 0x980000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_uart0_default>;
>>>>> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c1: i2c@984000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c1_data_clk>;
>>>>> +				dmas = <&gpi_dma0 0 1 3 64 0>,
>>>>> +					<&gpi_dma0 1 1 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi1: spi@984000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
>>>>> +				dmas = <&gpi_dma0 0 1 1 64 0>,
>>>>> +					<&gpi_dma0 1 1 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c2: i2c@988000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c2_data_clk>;
>>>>> +				dmas = <&gpi_dma0 0 2 3 64 0>,
>>>>> +					<&gpi_dma0 1 2 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi2: spi@988000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
>>>>> +				dmas = <&gpi_dma0 0 2 1 64 0>,
>>>>> +					<&gpi_dma0 1 2 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c3: i2c@98c000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c3_data_clk>;
>>>>> +				dmas = <&gpi_dma0 0 3 3 64 0>,
>>>>> +					<&gpi_dma0 1 3 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi3: spi@98c000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
>>>>> +				dmas = <&gpi_dma0 0 3 1 64 0>,
>>>>> +					<&gpi_dma0 1 3 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c4: i2c@990000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c4_data_clk>;
>>>>> +				dmas = <&gpi_dma0 0 4 3 64 0>,
>>>>> +					<&gpi_dma0 1 4 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi4: spi@990000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
>>>>> +				dmas = <&gpi_dma0 0 4 1 64 0>,
>>>>> +					<&gpi_dma0 1 4 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c5: i2c@994000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c5_data_clk>;
>>>>> +				dmas = <&gpi_dma0 0 5 3 64 0>,
>>>>> +					<&gpi_dma0 1 5 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi5: spi@994000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
>>>>> +				dmas = <&gpi_dma0 0 5 1 64 0>,
>>>>> +					<&gpi_dma0 1 5 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c6: i2c@998000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c6_data_clk>;
>>>>> +				dmas = <&gpi_dma0 0 6 3 64 0>,
>>>>> +					<&gpi_dma0 1 6 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi6: spi@998000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
>>>>> +				dmas = <&gpi_dma0 0 6 1 64 0>,
>>>>> +					<&gpi_dma0 1 6 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			uart7: serial@99c000 {
>>>>> +				compatible = "qcom,geni-debug-uart";
>>>>> +				reg = <0x0 0x99c000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
>>>>> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +		};
>>>>> +
>>>>> +		gpi_dma1: dma-controller@a00000  {
>>>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>>>> See above.
>>>>
>>>>> +			#dma-cells = <5>;
>>>>> +			reg = <0x0 0xa00000 0x0 0x60000>;
>>>>> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +			dma-channels = <12>;
>>>>> +			dma-channel-mask = <0x3f>;
>>>>> +			iommus = <&apps_smmu 0x116 0x0>;
>>>>> +			status = "ok";
>>>>> +		};
>>>>> +
>>>>> +		qupv3_id_1: geniqup@ac0000 {
>>>>> +			compatible = "qcom,geni-se-qup";
>>>>> +			reg = <0x0 0xac0000 0x0 0x2000>;
>>>>> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
>>>>> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
>>>>> +			iommus = <&apps_smmu 0x103 0x0>;
>>>>> +			#address-cells = <1>;
>>>>> +			#size-cells = <1>;
>>>>> +			clock-names = "m-ahb", "s-ahb";
>>>>> +
>>>>> +			ranges;
>>>>> +			status = "disabled";
>>>>> +
>>>>> +			uart8: serial@a80000 {
>>>>> +				compatible = "qcom,geni-uart";
>>>>> +				reg = <0x0 0xa80000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_uart8_default>;
>>>>> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c9: i2c@a84000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c9_data_clk>;
>>>>> +				dmas = <&gpi_dma1 0 1 3 64 0>,
>>>>> +					<&gpi_dma1 1 1 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi9: spi@a84000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
>>>>> +				dmas = <&gpi_dma1 0 1 1 64 0>,
>>>>> +					<&gpi_dma1 1 1 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c10: i2c@a88000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c10_data_clk>;
>>>>> +				dmas = <&gpi_dma1 0 2 3 64 0>,
>>>>> +					<&gpi_dma1 1 2 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi10: spi@a88000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
>>>>> +				dmas = <&gpi_dma1 0 2 1 64 0>,
>>>>> +					<&gpi_dma1 1 2 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c11: i2c@a8c000 {
>>>>> +				compatible = "qcom,i2c-geni";
>>>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c11_data_clk>;
>>>>> +				dmas = <&gpi_dma1 0 3 3 64 0>,
>>>>> +					<&gpi_dma1 1 3 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi11: spi@a8c000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
>>>>> +				dmas = <&gpi_dma1 0 3 1 64 0>,
>>>>> +					<&gpi_dma1 1 3 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c12: i2c@a90000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c12_data_clk>;
>>>>> +				dmas = <&gpi_dma1 0 4 3 64 0>,
>>>>> +					<&gpi_dma1 1 4 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi12: spi@a90000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
>>>>> +				dmas = <&gpi_dma1 0 4 1 64 0>,
>>>>> +					<&gpi_dma1 1 4 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c13: i2c@a94000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c13_data_clk>;
>>>>> +				dmas = <&gpi_dma1 0 5 3 64 0>,
>>>>> +					<&gpi_dma1 1 5 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			uart13: serial@a94000 {
>>>>> +				compatible = "qcom,geni-uart";
>>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_uart13_default>;
>>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi13: spi@a94000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
>>>>> +				dmas = <&gpi_dma1 0 5 1 64 0>,
>>>>> +					<&gpi_dma1 1 5 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c14: i2c@a98000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c14_data_clk>;
>>>>> +				dmas = <&gpi_dma1 0 6 3 64 0>,
>>>>> +					<&gpi_dma1 1 6 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi14: spi@a98000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
>>>>> +				dmas = <&gpi_dma1 0 6 1 64 0>,
>>>>> +					<&gpi_dma1 1 6 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c15: i2c@a9c000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c15_data_clk>;
>>>>> +				dmas = <&gpi_dma1 0 7 3 64 0>,
>>>>> +					<&gpi_dma1 1 7 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi15: spi@a9c000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
>>>>> +				dmas = <&gpi_dma1 0 7 1 64 0>,
>>>>> +					<&gpi_dma1 1 7 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +		};
>>>>> +
>>>>> +		system_noc: interconnect@1640000 {
>>>>> +			reg = <0x0 0x1640000 0x0 0x45080>;
>>>>> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
>>>>> +			#interconnect-cells = <1>;
>>>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>>>> +		};
>>>>> +
>>>>> +		tcsr_mutex: hwlock@1f40000 {
>>>>> +			compatible = "qcom,tcsr-mutex";
>>>>> +			reg = <0x0 0x1f40000 0x0 0x20000>;
>>>>> +			#hwlock-cells = <1>;
>>>>> +		};
>>>>> +
>>>>> +		pdc: interrupt-controller@b220000 {
>>>>> +			compatible = "qcom,pdc";
>>>>> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
>>>>> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
>>>>> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
>>>>> +					  <94 609 31>, <125 63 1>;
>>>>> +			#interrupt-cells = <2>;
>>>>> +			interrupt-parent = <&intc>;
>>>>> +			interrupt-controller;
>>>>> +		};
>>>>> +
>>>>> +		spmi_bus: spmi@c400000 {
>>>>> +			compatible = "qcom,spmi-pmic-arb";
>>>>> +			reg = <0x0 0xc400000 0x0 0x3000>,
>>>>> +			      <0x0 0xc500000 0x0 0x400000>,
>>>>> +			      <0x0 0xc440000 0x0 0x80000>,
>>>>> +			      <0x0 0xc4c0000 0x0 0x10000>,
>>>>> +			      <0x0 0xc42d000 0x0 0x4000>;
>>>>> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>>>>> +			interrupt-names = "periph_irq";
>>>>> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +			qcom,ee = <0>;
>>>>> +			qcom,channel = <0>;
>>>>> +			#address-cells = <2>;
>>>>> +			#size-cells = <0>;
>>>>> +			interrupt-controller;
>>>>> +			#interrupt-cells = <4>;
>>>>> +		};
>>>>> +
>>>>> +		tlmm: pinctrl@f000000 {
>>>>> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
>>>>> +			reg = <0x0 0xf000000 0x0 0x1000000>;
>>>>> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +			gpio-controller;
>>>>> +			#gpio-cells = <2>;
>>>>> +			interrupt-controller;
>>>>> +			#interrupt-cells = <2>;
>>>>> +			gpio-ranges = <&tlmm 0 0 151>;
>>>>> +			wakeup-parent = <&pdc>;
>>>>> +
>>>>> +			qup_uart0_default: qup-uart0-default-state {
>>>>> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
>>>>> +				function = "qup00";
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c1_data_clk: qup-i2c1-data-clk {
>>>>> +				pins = "gpio10", "gpio11";
>>>>> +				function = "qup01";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pull-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi1_data_clk: qup-spi1-data-clk {
>>>>> +				pins = "gpio10", "gpio11", "gpio12";
>>>>> +				function = "qup01";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi1_cs: qup-spi1-cs {
>>>>> +				pins = "gpio13";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
>>>>> +				pins = "gpio12", "gpio13";
>>>>> +				function = "qup02";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pull-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi2_data_clk: qup-spi2-data-clk {
>>>>> +				pins = "gpio12", "gpio13", "gpio10";
>>>>> +				function = "qup02";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi2_cs: qup-spi2-cs {
>>>>> +				pins = "gpio11";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
>>>>> +				pins = "gpio14", "gpio15";
>>>>> +				function = "qup03";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pull-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi3_data_clk: qup-spi3-data-clk {
>>>>> +				pins = "gpio14", "gpio15", "gpio16";
>>>>> +				function = "qup03";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi3_cs: qup-spi3-cs {
>>>>> +				pins = "gpio17";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
>>>>> +				pins = "gpio16", "gpio17";
>>>>> +				function = "qup04";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pull-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi4_data_clk: qup-spi4-data-clk {
>>>>> +				pins = "gpio16", "gpio17", "gpio14";
>>>>> +				function = "qup04";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi4_cs: qup-spi4-cs {
>>>>> +				pins = "gpio15";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
>>>>> +				pins = "gpio130", "gpio131";
>>>>> +				function = "qup05";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pull-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi5_data_clk: qup-spi5-data-clk {
>>>>> +				pins = "gpio130", "gpio131", "gpio132";
>>>>> +				function = "qup05";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi5_cs: qup-spi5-cs {
>>>>> +				pins = "gpio133";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
>>>>> +				pins = "gpio132", "gpio133";
>>>>> +				function = "qup06";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pull-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi6_data_clk: qup-spi6-data-clk {
>>>>> +				pins = "gpio132", "gpio133", "gpio130";
>>>>> +				function = "qup06";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi6_cs: qup-spi6-cs {
>>>>> +				pins = "gpio131";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_uart7_rx: qup-uart7-rx {
>>>>> +				pins = "gpio135";
>>>>> +				function = "qup07";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_uart7_tx: qup-uart7-tx  {
>>>>> +				pins = "gpio134";
>>>>> +				function = "qup07";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_uart8_default: qup-uart8-default {
>>>>> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
>>>>> +				function = "qup10";
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
>>>>> +				pins = "gpio22", "gpio23";
>>>>> +				function = "qup11";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pull-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi9_data_clk: qup-spi9-data-clk {
>>>>> +				pins = "gpio22", "gpio23", "gpio24";
>>>>> +				function = "qup11";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi9_cs: qup-spi9-cs {
>>>>> +				pins = "gpio25";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
>>>>> +				pins = "gpio24", "gpio25";
>>>>> +				function = "qup12";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pulll-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi10_data_clk: qup-spi10-data-clk {
>>>>> +				pins = "gpio24", "gpio25", "gpio22";
>>>>> +				function = "qup12";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi10_cs: qup-spi10-cs {
>>>>> +				pins = "gpio23";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
>>>>> +				pins = "gpio26", "gpio27";
>>>>> +				function = "qup13";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pulll-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi11_data_clk: qup-spi11-data-clk {
>>>>> +				pins = "gpio26", "gpio27", "gpio28";
>>>>> +				function = "qup13";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi11_cs: qup-spi11-cs {
>>>>> +				pins = "gpio29";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
>>>>> +				pins = "gpio28", "gpio29";
>>>>> +				function = "qup14";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pulll-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi12_data_clk: qup-spi12-data-clk {
>>>>> +				pins = "gpio28", "gpio29", "gpio26";
>>>>> +				function = "qup14";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi12_cs: qup-spi12-cs {
>>>>> +				pins = "gpio27";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
>>>>> +				pins = "gpio30", "gpio31";
>>>>> +				function = "qup15";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pulll-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi13_data_clk: qup-spi13-data-clk {
>>>>> +				pins = "gpio30", "gpio31", "gpio32";
>>>>> +				function = "qup15";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi13_cs: qup-spi13-cs {
>>>>> +				pins = "gpio33";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_uart13_default: qup-uart13-default {
>>>>> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
>>>>> +				function = "qup15";
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
>>>>> +				pins = "gpio34", "gpio35";
>>>>> +				function = "qup16";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pulll-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi14_data_clk: qup-spi14-data-clk {
>>>>> +				pins = "gpio34", "gpio35", "gpio36";
>>>>> +				function = "qup16";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi14_cs: qup-spi14-cs {
>>>>> +				pins = "gpio37", "gpio38";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
>>>>> +				pins = "gpio40", "gpio41";
>>>>> +				function = "qup17";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pulll-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi15_data_clk: qup-spi15-data-clk {
>>>>> +				pins = "gpio40", "gpio41", "gpio30";
>>>>> +				function = "qup17";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi15_cs: qup-spi15-cs {
>>>>> +				pins = "gpio31";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +		};
>>>>> +
>>>>> +		apps_smmu: apps-smmu@15000000 {
>>>>> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
>>>>> +				"arm,mmu-500";
>>>>> +			reg = <0x0 0x15000000 0x0 0x100000>;
>>>>> +			#iommu-cells = <2>;
>>>>> +			#global-interrupts = <2>;
>>>>> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +		};
>>>>> +
>>>>> +		intc: interrupt-controller@17200000 {
>>>>> +			compatible = "arm,gic-v3";
>>>>> +			#interrupt-cells = <3>;
>>>>> +			interrupt-controller;
>>>>> +			#redistributor-regions = <1>;
>>>>> +			redistributor-stride = <0x0 0x20000>;
>>>>> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
>>>>> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
>>>>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
>>>>> +		};
>>>>> +
>>>>> +		timer@17420000 {
>>>>> +			compatible = "arm,armv7-timer-mem";
>>>>> +			#address-cells = <2>;
>>>>> +			#size-cells = <2>;
>>>>> +			ranges;
>>>>> +			reg = <0x0 0x17420000 0x0 0x1000>;
>>>>> +			clock-frequency = <19200000>;
>>>>> +
>>>>> +			frame@17421000 {
>>>>> +				frame-number = <0>;
>>>>> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				reg = <0x0 0x17421000 0x0 0x1000>,
>>>>> +				      <0x0 0x17422000 0x0 0x1000>;
>>>>> +			};
>>>>> +
>>>>> +			frame@17423000 {
>>>>> +				frame-number = <1>;
>>>>> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				reg = <0x0 0x17423000 0x0 0x1000>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			frame@17425000 {
>>>>> +				frame-number = <2>;
>>>>> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				reg = <0x0 0x17425000 0x0 0x1000>,
>>>>> +				      <0x0 0x17426000 0x0 0x1000>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			frame@17427000 {
>>>>> +				frame-number = <3>;
>>>>> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				reg = <0x0 0x17427000 0x0 0x1000>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			frame@17429000 {
>>>>> +				frame-number = <4>;
>>>>> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				reg = <0x0 0x17429000 0x0 0x1000>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			frame@1742b000 {
>>>>> +				frame-number = <5>;
>>>>> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				reg = <0x0 0x1742b000 0x0 0x1000>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			frame@1742d000 {
>>>>> +				frame-number = <6>;
>>>>> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				reg = <0x0 0x1742d000 0x0 0x1000>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +		};
>>>>> +
>>>>> +		apps_rsc: rsc@17a00000 {
>>>>> +			label = "apps_rsc";
>>>>> +			compatible = "qcom,rpmh-rsc";
>>>>> +			reg = <0x0 0x17a00000 0x0 0x10000>,
>>>>> +			      <0x0 0x17a10000 0x0 0x10000>,
>>>>> +			      <0x0 0x17a20000 0x0 0x10000>;
>>>>> +			reg-names = "drv-0", "drv-1", "drv-2";
>>>>> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +			qcom,tcs-offset = <0xd00>;
>>>>> +			qcom,drv-id = <2>;
>>>>> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
>>>>> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
>>>>> +
>>>>> +			apps_bcm_voter: bcm_voter {
>>>>> +				compatible = "qcom,bcm-voter";
>>>>> +			};
>>>>> +
>>>>> +			rpmhcc: clock-controller {
>>>>> +				compatible = "qcom,qdu1000-rpmh-clk", "qcom,qru1000-rpmh-clk";
>>>>> +				#clock-cells = <1>;
>>>>> +				clock-names = "xo";
>>>>> +				clocks = <&xo_board>;
>>>>> +			};
>>>>> +
>>>>> +			rpmhpd: power-controller {
>>>>> +				compatible = "qcom,qdu1000-rpmhpd", "qcom,qru1000-rpmhpd";
>>>>> +				#power-domain-cells = <1>;
>>>>> +				operating-points-v2 = <&rpmhpd_opp_table>;
>>>>> +
>>>>> +				rpmhpd_opp_table: opp-table {
>>>>> +					compatible = "operating-points-v2";
>>>>> +
>>>>> +					rpmhpd_opp_ret: opp1 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_min_svs: opp2 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_low_svs: opp3 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_svs: opp4 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_svs_l1: opp5 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_nom: opp6 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_nom_l1: opp7 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_nom_l2: opp8 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_turbo: opp9 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_turbo_l1: opp10 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
>>>>> +					};
>>>>> +				};
>>>>> +			};
>>>>> +		};
>>>>> +
>>>>> +		cpufreq_hw: cpufreq@17d91000 {
>>>>> +			compatible = "qcom, qdu1000-cpufreq-epss", "qcom, qru1000-cpufreq-epss",
>>>>> +				"qcom,cpufreq-epss";
>>>>> +			reg = <0x0 0x17d91000 0x0 0x1000>;
>>>>> +			reg-names = "freq-domain0";
>>>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
>>>>> +			clock-names = "xo", "alternate";
>>>>> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +			interrupt-names = "dcvsh-irq-0";
>>>>> +			#freq-domain-cells = <1>;
>>>>> +		};
>>>>> +
>>>>> +		gem_noc: interconnect@19100000 {
>>>>> +			reg = <0x0 0x19100000 0x0 0xB8080>;
>>>>> +			compatible = "qcom,qdu1000-gem-noc", "qcom,qru1000-gem-noc";
>>>>> +			#interconnect-cells = <1>;
>>>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>>>> +		};
>>>>> +
>>>>> +		arch_timer: timer {
>>>>> +			compatible = "arm,armv8-timer";
>>>>> +			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>> +				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>> +				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>> +				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>> +				     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>>>>> +			clock-frequency = <19200000>;
>>>>> +		};
>>>>> +	};
>>>>> +};
>>>>> diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>>> new file mode 100644
>>>>> index 000000000000..074fe126e85e
>>>>> --- /dev/null
>>>>> +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>>> @@ -0,0 +1,27 @@
>>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>>> +/*
>>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>>>> + */
>>>>> +
>>>>> +#include "qdu1000.dtsi"
>>>>> +
>>>>> +&reserved_memory {
>>>>> +	/delete-node/ memory@a0000000;
>>>>> +	/delete-node/ memory@b9600000;
>>>>> +	/delete-node/ memory@c0000000;
>>>>> +
>>>>> +	oem_tenx_mem: memory@a0000000 {
>>>>> +		no-map;
>>>>> +		reg = <0x0 0xa0000000 0x0 0x6400000>;
>>>>> +	};
>>>>> +
>>>>> +	mpss_diag_buffer_mem: memory@aea00000 {
>>>>> +		no-map;
>>>>> +		reg = <0x0 0xaea00000 0x0 0x6400000>;
>>>>> +	};
>>>>> +
>>>>> +	tenx_q6_buffer_mem: memory@b4e00000 {
>>>>> +		no-map;
>>>>> +		reg = <0x0 0xb4e00000 0x0 0x3200000>;
>>>>> +	};
>>>>> +};
>>>>> -- 
>>>>> 2.38.0
>>> Thanks,
>>> Melody

Melody Olvera Oct. 24, 2022, 10:56 p.m. UTC | #18

On 10/24/2022 3:51 PM, Richard Acayan wrote:
>> On 10/24/2022 3:28 PM, Richard Acayan wrote:
>>>> On 10/23/2022 5:53 PM, Richard Acayan wrote:
>>>>>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>>>>>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>>>>>> to boot to shell with console on these SoCs.
>>>>>>
>>>>>> Signed-off-by: Melody Olvera <[e-mail]>
>>>>>> ---
>>>>>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>>>>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>>>>>  2 files changed, 1673 insertions(+)
>>>>>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>>>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>>>>
>>>>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>>>> new file mode 100644
>>>>>> index 000000000000..777734b30f56
>>>>>> --- /dev/null
>>>>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>>>> @@ -0,0 +1,1646 @@
>>>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>>>> +/*
>>>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>>>>> + */
>>>>>> +
>>>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>>>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>>>>>> +#include <dt-bindings/clock/qcom,rpmh.h>
>>>>>> +#include <dt-bindings/dma/qcom-gpi.h>
>>>>>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>>>>>> +#include <dt-bindings/power/qcom-rpmpd.h>
>>>>>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>>>>> +
>>>>>> +/ {
>>>>>> +	interrupt-parent = <&intc>;
>>>>>> +
>>>>>> +	#address-cells = <2>;
>>>>>> +	#size-cells = <2>;
>>>>>> +
>>>>>> +	chosen: chosen { };
>>>>>> +
>>>>>> +	clocks {
>>>>>> +		xo_board: xo-board {
>>>>>> +			compatible = "fixed-clock";
>>>>>> +			clock-frequency = <19200000>;
>>>>>> +			clock-output-names = "xo_board";
>>>>>> +			#clock-cells = <0>;
>>>>>> +		};
>>>>>> +
>>>>>> +		sleep_clk: sleep-clk {
>>>>>> +			compatible = "fixed-clock";
>>>>>> +			clock-frequency = <32000>;
>>>>>> +			#clock-cells = <0>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	cpus {
>>>>>> +		#address-cells = <2>;
>>>>>> +		#size-cells = <0>;
>>>>>> +
>>>>>> +		CPU0: cpu@0 {
>>>>>> +			device_type = "cpu";
>>>>>> +			compatible = "arm,cortex-a55";
>>>>>> +			reg = <0x0 0x0>;
>>>>>> +			enable-method = "psci";
>>>>>> +			power-domain-names = "psci";
>>>>>> +			power-domains = <&CPU_PD0>;
>>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>>> +			next-level-cache = <&L2_0>;
>>>>>> +			L2_0: l2-cache {
>>>>>> +			      compatible = "cache";
>>>>>> +			      next-level-cache = <&L3_0>;
>>>>>> +				L3_0: l3-cache {
>>>>>> +					compatible = "cache";
>>>>>> +				};
>>>>>> +			};
>>>>>> +		};
>>>>>> +
>>>>>> +		CPU1: cpu@100 {
>>>>>> +			device_type = "cpu";
>>>>>> +			compatible = "arm,cortex-a55";
>>>>>> +			reg = <0x0 0x100>;
>>>>>> +			enable-method = "psci";
>>>>>> +			power-domains = <&CPU_PD1>;
>>>>>> +			power-domain-names = "psci";
>>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>>> +			next-level-cache = <&L2_100>;
>>>>>> +			L2_100: l2-cache {
>>>>>> +			      compatible = "cache";
>>>>>> +			      next-level-cache = <&L3_0>;
>>>>>> +			};
>>>>>> +
>>>>>> +		};
>>>>>> +
>>>>>> +		CPU2: cpu@200 {
>>>>>> +			device_type = "cpu";
>>>>>> +			compatible = "arm,cortex-a55";
>>>>>> +			reg = <0x0 0x200>;
>>>>>> +			enable-method = "psci";
>>>>>> +			power-domains = <&CPU_PD2>;
>>>>>> +			power-domain-names = "psci";
>>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>>> +			next-level-cache = <&L2_200>;
>>>>>> +			L2_200: l2-cache {
>>>>>> +			      compatible = "cache";
>>>>>> +			      next-level-cache = <&L3_0>;
>>>>>> +			};
>>>>>> +		};
>>>>>> +
>>>>>> +		CPU3: cpu@300 {
>>>>>> +			device_type = "cpu";
>>>>>> +			compatible = "arm,cortex-a55";
>>>>>> +			reg = <0x0 0x300>;
>>>>>> +			enable-method = "psci";
>>>>>> +			power-domains = <&CPU_PD3>;
>>>>>> +			power-domain-names = "psci";
>>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>>> +			next-level-cache = <&L2_300>;
>>>>>> +			L2_300: l2-cache {
>>>>>> +			      compatible = "cache";
>>>>>> +			      next-level-cache = <&L3_0>;
>>>>>> +			};
>>>>>> +
>>>>>> +		};
>>>>>> +
>>>>>> +		cpu-map {
>>>>>> +			cluster0 {
>>>>>> +				core0 {
>>>>>> +					cpu = <&CPU0>;
>>>>>> +				};
>>>>>> +
>>>>>> +				core1 {
>>>>>> +					cpu = <&CPU1>;
>>>>>> +				};
>>>>>> +
>>>>>> +				core2 {
>>>>>> +					cpu = <&CPU2>;
>>>>>> +				};
>>>>>> +
>>>>>> +				core3 {
>>>>>> +					cpu = <&CPU3>;
>>>>>> +				};
>>>>>> +			};
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	idle-states {
>>>>>> +		entry-method = "psci";
>>>>>> +
>>>>>> +		CPU_OFF: cpu-sleep-0 {
>>>>>> +			compatible = "arm,idle-state";
>>>>>> +			idle-state-name = "rail-pc";
>>>>>> +			entry-latency-us = <274>;
>>>>>> +			exit-latency-us = <480>;
>>>>>> +			min-residency-us = <3934>;
>>>>>> +			arm,psci-suspend-param = <0x40000004>;
>>>>>> +			local-timer-stop;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	domain-idle-states {
>>>>>> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
>>>>>> +			compatible = "domain-idle-state";
>>>>>> +			idle-state-name = "cluster-l3-off";
>>>>>> +			entry-latency-us = <584>;
>>>>>> +			exit-latency-us = <2332>;
>>>>>> +			min-residency-us = <6118>;
>>>>>> +			arm,psci-suspend-param = <0x41000044>;
>>>>>> +		};
>>>>>> +
>>>>>> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
>>>>>> +			compatible = "domain-idle-state";
>>>>>> +			idle-state-name = "cluster-power-collapse";
>>>>>> +			entry-latency-us = <2893>;
>>>>>> +			exit-latency-us = <4023>;
>>>>>> +			min-residency-us = <9987>;
>>>>>> +			arm,psci-suspend-param = <0x41003344>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	firmware {
>>>>>> +		qcom_scm {
>>>>>> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
>>>>>> +			#reset-cells = <1>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	clk_virt: interconnect-0 {
>>>>>> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
>>>>>> +		#interconnect-cells = <2>;
>>>>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>>>>> +	};
>>>>>> +
>>>>>> +	mc_virt: interconnect-1 {
>>>>>> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
>>>>>> +		#interconnect-cells = <2>;
>>>>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>>>>> +	};
>>>>>> +
>>>>>> +	memory@80000000 {
>>>>>> +		device_type = "memory";
>>>>>> +		/* We expect the bootloader to fill in the size */
>>>>>> +		reg = <0x0 0x80000000 0x0 0x0>;
>>>>>> +	};
>>>>>> +
>>>>>> +	pmu {
>>>>>> +		compatible = "arm,armv8-pmuv3";
>>>>>> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +	};
>>>>>> +
>>>>>> +	psci {
>>>>>> +		compatible = "arm,psci-1.0";
>>>>>> +		method = "smc";
>>>>>> +
>>>>>> +		CPU_PD0: cpu-pd0 {
>>>>>> +			#power-domain-cells = <0>;
>>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>>> +		};
>>>>>> +
>>>>>> +		CPU_PD1: cpu-pd1 {
>>>>>> +			#power-domain-cells = <0>;
>>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>>> +		};
>>>>>> +
>>>>>> +		CPU_PD2: cpu-pd2 {
>>>>>> +			#power-domain-cells = <0>;
>>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>>> +		};
>>>>>> +
>>>>>> +		CPU_PD3: cpu-pd3 {
>>>>>> +			#power-domain-cells = <0>;
>>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>>> +		};
>>>>>> +
>>>>>> +		CLUSTER_PD: cluster-pd {
>>>>>> +			#power-domain-cells = <0>;
>>>>>> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	reserved_memory: reserved-memory {
>>>>>> +		#address-cells = <2>;
>>>>>> +		#size-cells = <2>;
>>>>>> +		ranges;
>>>>>> +
>>>>>> +		hyp_mem: memory@80000000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80000000 0x0 0x600000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		xbl_dt_log_mem: memory@80600000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80600000 0x0 0x40000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		xbl_ramdump_mem: memory@80640000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		aop_image_mem: memory@80800000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80800000 0x0 0x60000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		aop_cmd_db_mem: memory@80860000 {
>>>>>> +			compatible = "qcom,cmd-db";
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80860000 0x0 0x20000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		aop_config_mem: memory@80880000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80880000 0x0 0x20000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		tme_crash_dump_mem: memory@808a0000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x808a0000 0x0 0x40000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		tme_log_mem: memory@808e0000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x808e0000 0x0 0x4000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		uefi_log_mem: memory@808e4000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x808e4000 0x0 0x10000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		/* secdata region can be reused by apps */
>>>>>> +
>>>>>> +		smem_mem: memory@80900000 {
>>>>>> +			compatible = "qcom,smem";
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80900000 0x0 0x200000>;
>>>>>> +			hwlocks = <&tcsr_mutex 3>;
>>>>>> +		};
>>>>>> +
>>>>>> +		cpucp_fw_mem: memory@80b00000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80b00000 0x0 0x100000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		xbl_sc_mem: memory@80c00000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80c00000 0x0 0x40000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		/* uefi region can be reused by apps */
>>>>>> +
>>>>>> +		tz_stat_mem: memory@81d00000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x81d00000 0x0 0x100000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		tags_mem: memory@81e00000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x81e00000 0x0 0x500000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		qtee_mem: memory@82300000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x82300000 0x0 0x500000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		ta_mem: memory@82800000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x82800000 0x0 0xa00000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		fs1_mem: memory@83200000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x83200000 0x0 0x400000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		fs2_mem: memory@83600000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x83600000 0x0 0x400000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		fs3_mem: memory@83a00000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x83a00000 0x0 0x400000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		/* Linux kernel image is loaded at 0x83e00000 */
>>>>>> +
>>>>>> +		ipa_fw_mem: memory@8be00000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x8be00000 0x0 0x10000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		ipa_gsi_mem: memory@8be10000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x8be10000 0x0 0x14000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		mpss_mem: memory@8c000000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		q6_mpss_dtb_mem: memory@9ec00000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		tenx_mem: memory@a0000000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		oem_tenx_mem: memory@b9600000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		tenx_q6_buffer_mem: memory@c0000000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		ipa_buffer_mem: memory@c3200000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	soc: soc@0 {
>>>>>> +		#address-cells = <2>;
>>>>>> +		#size-cells = <2>;
>>>>>> +		ranges = <0 0 0 0 0x10 0>;
>>>>>> +		dma-ranges = <0 0 0 0 0x10 0>;
>>>>>> +		compatible = "simple-bus";
>>>>>> +
>>>>>> +		gcc: clock-controller@80000 {
>>>>>> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
>>>>>> +			reg = <0x0 0x80000 0x0 0x1f4200>;
>>>>>> +			#clock-cells = <1>;
>>>>>> +			#reset-cells = <1>;
>>>>>> +			#power-domain-cells = <1>;
>>>>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
>>>>>> +			clock-names = "bi_tcxo", "sleep_clk";
>>>>>> +		};
>>>>>> +
>>>>>> +		gpi_dma0: dma-controller@900000  {
>>>>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>>>>> This won't work if you drop series [1]. It won't just fail the schema checks,
>>>>> but it would also fail to probe because the driver doesn't recognise it.
>>>>>
>>>>> I think you were told to rebase on [2], and didn't change your own series
>>>>> because it only applied to ee_offset = 0x0. There is another series [3] that
>>>>> was sent to you, meant for ee_offset = 0x10000. You're expected to change your
>>>>> patches (in both series you sent) based on what was changed in that series.
>>>>>
>>>>> [1] https://lore.kernel.org/linux-arm-msm/[e-mail]/
>>>>> [2] https://lore.kernel.org/linux-arm-msm/[e-mail]/T/
>>>>> [3] https://lore.kernel.org/linux-arm-msm/[e-mail]/T/
>>>> Hi Richard; I was aware of this feedback and was planning to make that change in v3.
>>>> PS [1] will be dropped and this compatible will be modified similar to PS [3]; that was
>>>> what I meant by my final comment on [1].
>>> Ok, I should have checked the date. What about the schema patch? It might be
>>> helpful for the device tree cleanup efforts if you didn't add a compatible
>>> without adding a corresponding entry in the device tree bindings.
>>>
>>> I'm talking about updating this patch in particular:
>>>
>>> https://lore.kernel.org/linux-arm-msm/[e-mail]/
>>>
>>> We still add compat strings in dt-bindings even when there is a fallback,
>>> because the schema is meant to specify every combination of compat strings
>>> found in the device trees.
>> That will be dropped as well. I'll use the sdm845 compat string instead of what's here.
> I hope you're talking about sm6350, because sdm845 has an ee_offset of 0. But if
> you think the maintainers will accept this, then it shouldn't be a problem. I
> just thought that you would copy what the other platforms are doing, which
> required a schema patch.
>
> Example:
>
> Documentation/devicetree/bindings/dma/qcom,gpi.yaml:
>
>     properties:
>       compatible:
>         oneOf:
>           - enum:
>               - qcom,sdm845-gpi-dma
>               - qcom,sm6350-gpi-dma
>           - items:
>               - enum:
>                   - qcom,qdu1000-gpi-dma
>                   - qcom,sc7280-gpi-dma
>                   - qcom,sm8350-gpi-dma
>                   - qcom,sm8450-gpi-dma
>               - const: qcom,sm6350-gpi-dma
>
> and
>
>     compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
>
> would pass schema checks.
>
> Documentation/devicetree/bindings/dma/qcom,gpi.yaml:
>
>     properties:
>       compatible:
>         oneOf:
>           - enum:
>               - qcom,sdm845-gpi-dma
>               - qcom,sm6350-gpi-dma
>           - items:
>               - enum:
>                   - qcom,sc7280-gpi-dma
>                   - qcom,sm8350-gpi-dma
>                   - qcom,sm8450-gpi-dma
>               - const: qcom,sm6350-gpi-dma
>
> and
>
>     compatible = "qcom,sm6350-gpi-dma";
>
> would also pass schema checks.
>
> Documentation/devicetree/bindings/dma/qcom,gpi.yaml:
>
>     properties:
>       compatible:
>         oneOf:
>           - enum:
>               - qcom,sdm845-gpi-dma
>               - qcom,sm6350-gpi-dma
>           - items:
>               - enum:
>                   - qcom,sc7280-gpi-dma
>                   - qcom,sm8350-gpi-dma
>                   - qcom,sm8450-gpi-dma
>               - const: qcom,sm6350-gpi-dma
>
> and
>
>     compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
>
> would not pass schema checks.
Yeah I meant sm6350; my bad. I'll just use that compatible and drop the qdu one.
>
>>>>>> +			#dma-cells = <5>;
>>>>>> +			reg = <0x0 0x900000 0x0 0x60000>;
>>>>>> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +			dma-channels = <12>;
>>>>>> +			dma-channel-mask = <0x3f>;
>>>>>> +			iommus = <&apps_smmu 0xf6 0x0>;
>>>>>> +			status = "ok";
>>>>>> +		};
>>>>>> +
>>>>>> +		qupv3_id_0: geniqup@9c0000 {
>>>>>> +			compatible = "qcom,geni-se-qup";
>>>>>> +			reg = <0x0 0x9c0000 0x0 0x2000>;
>>>>>> +			clock-names = "m-ahb", "s-ahb";
>>>>>> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>>>>>> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>>>>>> +			iommus = <&apps_smmu 0xe3 0x0>;
>>>>>> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
>>>>>> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
>>>>>> +			interconnect-names = "qup-core";
>>>>>> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
>>>>>> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
>>>>>> +			qcom,iommu-dma = "fastmap";
>>>>>> +			dma-coherent;
>>>>>> +
>>>>>> +			#address-cells = <2>;
>>>>>> +			#size-cells = <2>;
>>>>>> +			ranges;
>>>>>> +			status = "disabled";
>>>>>> +
>>>>>> +			uart0: serial@980000 {
>>>>>> +				compatible = "qcom,geni-uart";
>>>>>> +				reg = <0x0 0x980000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_uart0_default>;
>>>>>> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c1: i2c@984000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>>>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c1_data_clk>;
>>>>>> +				dmas = <&gpi_dma0 0 1 3 64 0>,
>>>>>> +					<&gpi_dma0 1 1 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi1: spi@984000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
>>>>>> +				dmas = <&gpi_dma0 0 1 1 64 0>,
>>>>>> +					<&gpi_dma0 1 1 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c2: i2c@988000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>>>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c2_data_clk>;
>>>>>> +				dmas = <&gpi_dma0 0 2 3 64 0>,
>>>>>> +					<&gpi_dma0 1 2 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi2: spi@988000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
>>>>>> +				dmas = <&gpi_dma0 0 2 1 64 0>,
>>>>>> +					<&gpi_dma0 1 2 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c3: i2c@98c000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>>>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c3_data_clk>;
>>>>>> +				dmas = <&gpi_dma0 0 3 3 64 0>,
>>>>>> +					<&gpi_dma0 1 3 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi3: spi@98c000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
>>>>>> +				dmas = <&gpi_dma0 0 3 1 64 0>,
>>>>>> +					<&gpi_dma0 1 3 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c4: i2c@990000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>>>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c4_data_clk>;
>>>>>> +				dmas = <&gpi_dma0 0 4 3 64 0>,
>>>>>> +					<&gpi_dma0 1 4 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi4: spi@990000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
>>>>>> +				dmas = <&gpi_dma0 0 4 1 64 0>,
>>>>>> +					<&gpi_dma0 1 4 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c5: i2c@994000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>>>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c5_data_clk>;
>>>>>> +				dmas = <&gpi_dma0 0 5 3 64 0>,
>>>>>> +					<&gpi_dma0 1 5 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi5: spi@994000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
>>>>>> +				dmas = <&gpi_dma0 0 5 1 64 0>,
>>>>>> +					<&gpi_dma0 1 5 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c6: i2c@998000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>>>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c6_data_clk>;
>>>>>> +				dmas = <&gpi_dma0 0 6 3 64 0>,
>>>>>> +					<&gpi_dma0 1 6 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi6: spi@998000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
>>>>>> +				dmas = <&gpi_dma0 0 6 1 64 0>,
>>>>>> +					<&gpi_dma0 1 6 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			uart7: serial@99c000 {
>>>>>> +				compatible = "qcom,geni-debug-uart";
>>>>>> +				reg = <0x0 0x99c000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
>>>>>> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +		};
>>>>>> +
>>>>>> +		gpi_dma1: dma-controller@a00000  {
>>>>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>>>>> See above.
>>>>>
>>>>>> +			#dma-cells = <5>;
>>>>>> +			reg = <0x0 0xa00000 0x0 0x60000>;
>>>>>> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +			dma-channels = <12>;
>>>>>> +			dma-channel-mask = <0x3f>;
>>>>>> +			iommus = <&apps_smmu 0x116 0x0>;
>>>>>> +			status = "ok";
>>>>>> +		};
>>>>>> +
>>>>>> +		qupv3_id_1: geniqup@ac0000 {
>>>>>> +			compatible = "qcom,geni-se-qup";
>>>>>> +			reg = <0x0 0xac0000 0x0 0x2000>;
>>>>>> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
>>>>>> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
>>>>>> +			iommus = <&apps_smmu 0x103 0x0>;
>>>>>> +			#address-cells = <1>;
>>>>>> +			#size-cells = <1>;
>>>>>> +			clock-names = "m-ahb", "s-ahb";
>>>>>> +
>>>>>> +			ranges;
>>>>>> +			status = "disabled";
>>>>>> +
>>>>>> +			uart8: serial@a80000 {
>>>>>> +				compatible = "qcom,geni-uart";
>>>>>> +				reg = <0x0 0xa80000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_uart8_default>;
>>>>>> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c9: i2c@a84000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>>>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c9_data_clk>;
>>>>>> +				dmas = <&gpi_dma1 0 1 3 64 0>,
>>>>>> +					<&gpi_dma1 1 1 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi9: spi@a84000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
>>>>>> +				dmas = <&gpi_dma1 0 1 1 64 0>,
>>>>>> +					<&gpi_dma1 1 1 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c10: i2c@a88000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>>>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c10_data_clk>;
>>>>>> +				dmas = <&gpi_dma1 0 2 3 64 0>,
>>>>>> +					<&gpi_dma1 1 2 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi10: spi@a88000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
>>>>>> +				dmas = <&gpi_dma1 0 2 1 64 0>,
>>>>>> +					<&gpi_dma1 1 2 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c11: i2c@a8c000 {
>>>>>> +				compatible = "qcom,i2c-geni";
>>>>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>>>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c11_data_clk>;
>>>>>> +				dmas = <&gpi_dma1 0 3 3 64 0>,
>>>>>> +					<&gpi_dma1 1 3 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi11: spi@a8c000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
>>>>>> +				dmas = <&gpi_dma1 0 3 1 64 0>,
>>>>>> +					<&gpi_dma1 1 3 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c12: i2c@a90000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c12_data_clk>;
>>>>>> +				dmas = <&gpi_dma1 0 4 3 64 0>,
>>>>>> +					<&gpi_dma1 1 4 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi12: spi@a90000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
>>>>>> +				dmas = <&gpi_dma1 0 4 1 64 0>,
>>>>>> +					<&gpi_dma1 1 4 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c13: i2c@a94000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c13_data_clk>;
>>>>>> +				dmas = <&gpi_dma1 0 5 3 64 0>,
>>>>>> +					<&gpi_dma1 1 5 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			uart13: serial@a94000 {
>>>>>> +				compatible = "qcom,geni-uart";
>>>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_uart13_default>;
>>>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi13: spi@a94000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
>>>>>> +				dmas = <&gpi_dma1 0 5 1 64 0>,
>>>>>> +					<&gpi_dma1 1 5 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c14: i2c@a98000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>>>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c14_data_clk>;
>>>>>> +				dmas = <&gpi_dma1 0 6 3 64 0>,
>>>>>> +					<&gpi_dma1 1 6 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi14: spi@a98000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
>>>>>> +				dmas = <&gpi_dma1 0 6 1 64 0>,
>>>>>> +					<&gpi_dma1 1 6 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c15: i2c@a9c000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>>>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c15_data_clk>;
>>>>>> +				dmas = <&gpi_dma1 0 7 3 64 0>,
>>>>>> +					<&gpi_dma1 1 7 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi15: spi@a9c000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
>>>>>> +				dmas = <&gpi_dma1 0 7 1 64 0>,
>>>>>> +					<&gpi_dma1 1 7 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +		};
>>>>>> +
>>>>>> +		system_noc: interconnect@1640000 {
>>>>>> +			reg = <0x0 0x1640000 0x0 0x45080>;
>>>>>> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
>>>>>> +			#interconnect-cells = <1>;
>>>>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>>>>> +		};
>>>>>> +
>>>>>> +		tcsr_mutex: hwlock@1f40000 {
>>>>>> +			compatible = "qcom,tcsr-mutex";
>>>>>> +			reg = <0x0 0x1f40000 0x0 0x20000>;
>>>>>> +			#hwlock-cells = <1>;
>>>>>> +		};
>>>>>> +
>>>>>> +		pdc: interrupt-controller@b220000 {
>>>>>> +			compatible = "qcom,pdc";
>>>>>> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
>>>>>> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
>>>>>> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
>>>>>> +					  <94 609 31>, <125 63 1>;
>>>>>> +			#interrupt-cells = <2>;
>>>>>> +			interrupt-parent = <&intc>;
>>>>>> +			interrupt-controller;
>>>>>> +		};
>>>>>> +
>>>>>> +		spmi_bus: spmi@c400000 {
>>>>>> +			compatible = "qcom,spmi-pmic-arb";
>>>>>> +			reg = <0x0 0xc400000 0x0 0x3000>,
>>>>>> +			      <0x0 0xc500000 0x0 0x400000>,
>>>>>> +			      <0x0 0xc440000 0x0 0x80000>,
>>>>>> +			      <0x0 0xc4c0000 0x0 0x10000>,
>>>>>> +			      <0x0 0xc42d000 0x0 0x4000>;
>>>>>> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>>>>>> +			interrupt-names = "periph_irq";
>>>>>> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +			qcom,ee = <0>;
>>>>>> +			qcom,channel = <0>;
>>>>>> +			#address-cells = <2>;
>>>>>> +			#size-cells = <0>;
>>>>>> +			interrupt-controller;
>>>>>> +			#interrupt-cells = <4>;
>>>>>> +		};
>>>>>> +
>>>>>> +		tlmm: pinctrl@f000000 {
>>>>>> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
>>>>>> +			reg = <0x0 0xf000000 0x0 0x1000000>;
>>>>>> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +			gpio-controller;
>>>>>> +			#gpio-cells = <2>;
>>>>>> +			interrupt-controller;
>>>>>> +			#interrupt-cells = <2>;
>>>>>> +			gpio-ranges = <&tlmm 0 0 151>;
>>>>>> +			wakeup-parent = <&pdc>;
>>>>>> +
>>>>>> +			qup_uart0_default: qup-uart0-default-state {
>>>>>> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
>>>>>> +				function = "qup00";
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c1_data_clk: qup-i2c1-data-clk {
>>>>>> +				pins = "gpio10", "gpio11";
>>>>>> +				function = "qup01";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pull-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi1_data_clk: qup-spi1-data-clk {
>>>>>> +				pins = "gpio10", "gpio11", "gpio12";
>>>>>> +				function = "qup01";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi1_cs: qup-spi1-cs {
>>>>>> +				pins = "gpio13";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
>>>>>> +				pins = "gpio12", "gpio13";
>>>>>> +				function = "qup02";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pull-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi2_data_clk: qup-spi2-data-clk {
>>>>>> +				pins = "gpio12", "gpio13", "gpio10";
>>>>>> +				function = "qup02";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi2_cs: qup-spi2-cs {
>>>>>> +				pins = "gpio11";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
>>>>>> +				pins = "gpio14", "gpio15";
>>>>>> +				function = "qup03";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pull-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi3_data_clk: qup-spi3-data-clk {
>>>>>> +				pins = "gpio14", "gpio15", "gpio16";
>>>>>> +				function = "qup03";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi3_cs: qup-spi3-cs {
>>>>>> +				pins = "gpio17";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
>>>>>> +				pins = "gpio16", "gpio17";
>>>>>> +				function = "qup04";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pull-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi4_data_clk: qup-spi4-data-clk {
>>>>>> +				pins = "gpio16", "gpio17", "gpio14";
>>>>>> +				function = "qup04";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi4_cs: qup-spi4-cs {
>>>>>> +				pins = "gpio15";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
>>>>>> +				pins = "gpio130", "gpio131";
>>>>>> +				function = "qup05";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pull-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi5_data_clk: qup-spi5-data-clk {
>>>>>> +				pins = "gpio130", "gpio131", "gpio132";
>>>>>> +				function = "qup05";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi5_cs: qup-spi5-cs {
>>>>>> +				pins = "gpio133";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
>>>>>> +				pins = "gpio132", "gpio133";
>>>>>> +				function = "qup06";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pull-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi6_data_clk: qup-spi6-data-clk {
>>>>>> +				pins = "gpio132", "gpio133", "gpio130";
>>>>>> +				function = "qup06";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi6_cs: qup-spi6-cs {
>>>>>> +				pins = "gpio131";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_uart7_rx: qup-uart7-rx {
>>>>>> +				pins = "gpio135";
>>>>>> +				function = "qup07";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_uart7_tx: qup-uart7-tx  {
>>>>>> +				pins = "gpio134";
>>>>>> +				function = "qup07";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_uart8_default: qup-uart8-default {
>>>>>> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
>>>>>> +				function = "qup10";
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
>>>>>> +				pins = "gpio22", "gpio23";
>>>>>> +				function = "qup11";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pull-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi9_data_clk: qup-spi9-data-clk {
>>>>>> +				pins = "gpio22", "gpio23", "gpio24";
>>>>>> +				function = "qup11";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi9_cs: qup-spi9-cs {
>>>>>> +				pins = "gpio25";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
>>>>>> +				pins = "gpio24", "gpio25";
>>>>>> +				function = "qup12";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pulll-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi10_data_clk: qup-spi10-data-clk {
>>>>>> +				pins = "gpio24", "gpio25", "gpio22";
>>>>>> +				function = "qup12";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi10_cs: qup-spi10-cs {
>>>>>> +				pins = "gpio23";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
>>>>>> +				pins = "gpio26", "gpio27";
>>>>>> +				function = "qup13";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pulll-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi11_data_clk: qup-spi11-data-clk {
>>>>>> +				pins = "gpio26", "gpio27", "gpio28";
>>>>>> +				function = "qup13";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi11_cs: qup-spi11-cs {
>>>>>> +				pins = "gpio29";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
>>>>>> +				pins = "gpio28", "gpio29";
>>>>>> +				function = "qup14";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pulll-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi12_data_clk: qup-spi12-data-clk {
>>>>>> +				pins = "gpio28", "gpio29", "gpio26";
>>>>>> +				function = "qup14";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi12_cs: qup-spi12-cs {
>>>>>> +				pins = "gpio27";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
>>>>>> +				pins = "gpio30", "gpio31";
>>>>>> +				function = "qup15";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pulll-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi13_data_clk: qup-spi13-data-clk {
>>>>>> +				pins = "gpio30", "gpio31", "gpio32";
>>>>>> +				function = "qup15";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi13_cs: qup-spi13-cs {
>>>>>> +				pins = "gpio33";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_uart13_default: qup-uart13-default {
>>>>>> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
>>>>>> +				function = "qup15";
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
>>>>>> +				pins = "gpio34", "gpio35";
>>>>>> +				function = "qup16";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pulll-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi14_data_clk: qup-spi14-data-clk {
>>>>>> +				pins = "gpio34", "gpio35", "gpio36";
>>>>>> +				function = "qup16";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi14_cs: qup-spi14-cs {
>>>>>> +				pins = "gpio37", "gpio38";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
>>>>>> +				pins = "gpio40", "gpio41";
>>>>>> +				function = "qup17";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pulll-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi15_data_clk: qup-spi15-data-clk {
>>>>>> +				pins = "gpio40", "gpio41", "gpio30";
>>>>>> +				function = "qup17";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi15_cs: qup-spi15-cs {
>>>>>> +				pins = "gpio31";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +		};
>>>>>> +
>>>>>> +		apps_smmu: apps-smmu@15000000 {
>>>>>> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
>>>>>> +				"arm,mmu-500";
>>>>>> +			reg = <0x0 0x15000000 0x0 0x100000>;
>>>>>> +			#iommu-cells = <2>;
>>>>>> +			#global-interrupts = <2>;
>>>>>> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +		};
>>>>>> +
>>>>>> +		intc: interrupt-controller@17200000 {
>>>>>> +			compatible = "arm,gic-v3";
>>>>>> +			#interrupt-cells = <3>;
>>>>>> +			interrupt-controller;
>>>>>> +			#redistributor-regions = <1>;
>>>>>> +			redistributor-stride = <0x0 0x20000>;
>>>>>> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
>>>>>> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
>>>>>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
>>>>>> +		};
>>>>>> +
>>>>>> +		timer@17420000 {
>>>>>> +			compatible = "arm,armv7-timer-mem";
>>>>>> +			#address-cells = <2>;
>>>>>> +			#size-cells = <2>;
>>>>>> +			ranges;
>>>>>> +			reg = <0x0 0x17420000 0x0 0x1000>;
>>>>>> +			clock-frequency = <19200000>;
>>>>>> +
>>>>>> +			frame@17421000 {
>>>>>> +				frame-number = <0>;
>>>>>> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				reg = <0x0 0x17421000 0x0 0x1000>,
>>>>>> +				      <0x0 0x17422000 0x0 0x1000>;
>>>>>> +			};
>>>>>> +
>>>>>> +			frame@17423000 {
>>>>>> +				frame-number = <1>;
>>>>>> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				reg = <0x0 0x17423000 0x0 0x1000>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			frame@17425000 {
>>>>>> +				frame-number = <2>;
>>>>>> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				reg = <0x0 0x17425000 0x0 0x1000>,
>>>>>> +				      <0x0 0x17426000 0x0 0x1000>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			frame@17427000 {
>>>>>> +				frame-number = <3>;
>>>>>> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				reg = <0x0 0x17427000 0x0 0x1000>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			frame@17429000 {
>>>>>> +				frame-number = <4>;
>>>>>> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				reg = <0x0 0x17429000 0x0 0x1000>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			frame@1742b000 {
>>>>>> +				frame-number = <5>;
>>>>>> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				reg = <0x0 0x1742b000 0x0 0x1000>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			frame@1742d000 {
>>>>>> +				frame-number = <6>;
>>>>>> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				reg = <0x0 0x1742d000 0x0 0x1000>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +		};
>>>>>> +
>>>>>> +		apps_rsc: rsc@17a00000 {
>>>>>> +			label = "apps_rsc";
>>>>>> +			compatible = "qcom,rpmh-rsc";
>>>>>> +			reg = <0x0 0x17a00000 0x0 0x10000>,
>>>>>> +			      <0x0 0x17a10000 0x0 0x10000>,
>>>>>> +			      <0x0 0x17a20000 0x0 0x10000>;
>>>>>> +			reg-names = "drv-0", "drv-1", "drv-2";
>>>>>> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +			qcom,tcs-offset = <0xd00>;
>>>>>> +			qcom,drv-id = <2>;
>>>>>> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
>>>>>> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
>>>>>> +
>>>>>> +			apps_bcm_voter: bcm_voter {
>>>>>> +				compatible = "qcom,bcm-voter";
>>>>>> +			};
>>>>>> +
>>>>>> +			rpmhcc: clock-controller {
>>>>>> +				compatible = "qcom,qdu1000-rpmh-clk", "qcom,qru1000-rpmh-clk";
>>>>>> +				#clock-cells = <1>;
>>>>>> +				clock-names = "xo";
>>>>>> +				clocks = <&xo_board>;
>>>>>> +			};
>>>>>> +
>>>>>> +			rpmhpd: power-controller {
>>>>>> +				compatible = "qcom,qdu1000-rpmhpd", "qcom,qru1000-rpmhpd";
>>>>>> +				#power-domain-cells = <1>;
>>>>>> +				operating-points-v2 = <&rpmhpd_opp_table>;
>>>>>> +
>>>>>> +				rpmhpd_opp_table: opp-table {
>>>>>> +					compatible = "operating-points-v2";
>>>>>> +
>>>>>> +					rpmhpd_opp_ret: opp1 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_min_svs: opp2 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_low_svs: opp3 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_svs: opp4 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_svs_l1: opp5 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_nom: opp6 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_nom_l1: opp7 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_nom_l2: opp8 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_turbo: opp9 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_turbo_l1: opp10 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
>>>>>> +					};
>>>>>> +				};
>>>>>> +			};
>>>>>> +		};
>>>>>> +
>>>>>> +		cpufreq_hw: cpufreq@17d91000 {
>>>>>> +			compatible = "qcom, qdu1000-cpufreq-epss", "qcom, qru1000-cpufreq-epss",
>>>>>> +				"qcom,cpufreq-epss";
>>>>>> +			reg = <0x0 0x17d91000 0x0 0x1000>;
>>>>>> +			reg-names = "freq-domain0";
>>>>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
>>>>>> +			clock-names = "xo", "alternate";
>>>>>> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +			interrupt-names = "dcvsh-irq-0";
>>>>>> +			#freq-domain-cells = <1>;
>>>>>> +		};
>>>>>> +
>>>>>> +		gem_noc: interconnect@19100000 {
>>>>>> +			reg = <0x0 0x19100000 0x0 0xB8080>;
>>>>>> +			compatible = "qcom,qdu1000-gem-noc", "qcom,qru1000-gem-noc";
>>>>>> +			#interconnect-cells = <1>;
>>>>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>>>>> +		};
>>>>>> +
>>>>>> +		arch_timer: timer {
>>>>>> +			compatible = "arm,armv8-timer";
>>>>>> +			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>>> +				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>>> +				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>>> +				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>>> +				     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>>>>>> +			clock-frequency = <19200000>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +};
>>>>>> diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>>>> new file mode 100644
>>>>>> index 000000000000..074fe126e85e
>>>>>> --- /dev/null
>>>>>> +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>>>> @@ -0,0 +1,27 @@
>>>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>>>> +/*
>>>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>>>>> + */
>>>>>> +
>>>>>> +#include "qdu1000.dtsi"
>>>>>> +
>>>>>> +&reserved_memory {
>>>>>> +	/delete-node/ memory@a0000000;
>>>>>> +	/delete-node/ memory@b9600000;
>>>>>> +	/delete-node/ memory@c0000000;
>>>>>> +
>>>>>> +	oem_tenx_mem: memory@a0000000 {
>>>>>> +		no-map;
>>>>>> +		reg = <0x0 0xa0000000 0x0 0x6400000>;
>>>>>> +	};
>>>>>> +
>>>>>> +	mpss_diag_buffer_mem: memory@aea00000 {
>>>>>> +		no-map;
>>>>>> +		reg = <0x0 0xaea00000 0x0 0x6400000>;
>>>>>> +	};
>>>>>> +
>>>>>> +	tenx_q6_buffer_mem: memory@b4e00000 {
>>>>>> +		no-map;
>>>>>> +		reg = <0x0 0xb4e00000 0x0 0x3200000>;
>>>>>> +	};
>>>>>> +};
>>>>>> -- 
>>>>>> 2.38.0
>>>> Thanks,
>>>> Melody

Patch

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
new file mode 100644
index 000000000000..777734b30f56
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -0,0 +1,1646 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,qdu1000.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen: chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			power-domain-names = "psci";
+			power-domains = <&CPU_PD0>;
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_100>;
+			L2_100: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_200>;
+			L2_200: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_300>;
+			L2_300: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+
+		CPU_OFF: cpu-sleep-0 {
+			compatible = "arm,idle-state";
+			idle-state-name = "rail-pc";
+			entry-latency-us = <274>;
+			exit-latency-us = <480>;
+			min-residency-us = <3934>;
+			arm,psci-suspend-param = <0x40000004>;
+			local-timer-stop;
+		};
+	};
+
+	domain-idle-states {
+		CLUSTER_SLEEP_0: cluster-sleep-0 {
+			compatible = "domain-idle-state";
+			idle-state-name = "cluster-l3-off";
+			entry-latency-us = <584>;
+			exit-latency-us = <2332>;
+			min-residency-us = <6118>;
+			arm,psci-suspend-param = <0x41000044>;
+		};
+
+		CLUSTER_SLEEP_1: cluster-sleep-1 {
+			compatible = "domain-idle-state";
+			idle-state-name = "cluster-power-collapse";
+			entry-latency-us = <2893>;
+			exit-latency-us = <4023>;
+			min-residency-us = <9987>;
+			arm,psci-suspend-param = <0x41003344>;
+		};
+	};
+
+	firmware {
+		qcom_scm {
+			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: cpu-pd0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CPU_PD1: cpu-pd1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CPU_PD2: cpu-pd2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CPU_PD3: cpu-pd3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CLUSTER_PD: cluster-pd {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			no-map;
+			reg = <0x0 0x80000000 0x0 0x600000>;
+		};
+
+		xbl_dt_log_mem: memory@80600000 {
+			no-map;
+			reg = <0x0 0x80600000 0x0 0x40000>;
+		};
+
+		xbl_ramdump_mem: memory@80640000 {
+			no-map;
+			reg = <0x0 0x80640000 0x0 0x1c0000>;
+		};
+
+		aop_image_mem: memory@80800000 {
+			no-map;
+			reg = <0x0 0x80800000 0x0 0x60000>;
+		};
+
+		aop_cmd_db_mem: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			no-map;
+			reg = <0x0 0x80860000 0x0 0x20000>;
+		};
+
+		aop_config_mem: memory@80880000 {
+			no-map;
+			reg = <0x0 0x80880000 0x0 0x20000>;
+		};
+
+		tme_crash_dump_mem: memory@808a0000 {
+			no-map;
+			reg = <0x0 0x808a0000 0x0 0x40000>;
+		};
+
+		tme_log_mem: memory@808e0000 {
+			no-map;
+			reg = <0x0 0x808e0000 0x0 0x4000>;
+		};
+
+		uefi_log_mem: memory@808e4000 {
+			no-map;
+			reg = <0x0 0x808e4000 0x0 0x10000>;
+		};
+
+		/* secdata region can be reused by apps */
+
+		smem_mem: memory@80900000 {
+			compatible = "qcom,smem";
+			no-map;
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		cpucp_fw_mem: memory@80b00000 {
+			no-map;
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+		};
+
+		xbl_sc_mem: memory@80c00000 {
+			no-map;
+			reg = <0x0 0x80c00000 0x0 0x40000>;
+		};
+
+		/* uefi region can be reused by apps */
+
+		tz_stat_mem: memory@81d00000 {
+			no-map;
+			reg = <0x0 0x81d00000 0x0 0x100000>;
+		};
+
+		tags_mem: memory@81e00000 {
+			no-map;
+			reg = <0x0 0x81e00000 0x0 0x500000>;
+		};
+
+		qtee_mem: memory@82300000 {
+			no-map;
+			reg = <0x0 0x82300000 0x0 0x500000>;
+		};
+
+		ta_mem: memory@82800000 {
+			no-map;
+			reg = <0x0 0x82800000 0x0 0xa00000>;
+		};
+
+		fs1_mem: memory@83200000 {
+			no-map;
+			reg = <0x0 0x83200000 0x0 0x400000>;
+		};
+
+		fs2_mem: memory@83600000 {
+			no-map;
+			reg = <0x0 0x83600000 0x0 0x400000>;
+		};
+
+		fs3_mem: memory@83a00000 {
+			no-map;
+			reg = <0x0 0x83a00000 0x0 0x400000>;
+		};
+
+		/* Linux kernel image is loaded at 0x83e00000 */
+
+		ipa_fw_mem: memory@8be00000 {
+			no-map;
+			reg = <0x0 0x8be00000 0x0 0x10000>;
+		};
+
+		ipa_gsi_mem: memory@8be10000 {
+			no-map;
+			reg = <0x0 0x8be10000 0x0 0x14000>;
+		};
+
+		mpss_mem: memory@8c000000 {
+			no-map;
+			reg = <0x0 0x8c000000 0x0 0x12c00000>;
+		};
+
+		q6_mpss_dtb_mem: memory@9ec00000 {
+			no-map;
+			reg = <0x0 0x9ec00000 0x0 0x80000>;
+		};
+
+		tenx_mem: memory@a0000000 {
+			no-map;
+			reg = <0x0 0xa0000000 0x0 0x19600000>;
+		};
+
+		oem_tenx_mem: memory@b9600000 {
+			no-map;
+			reg = <0x0 0xb9600000 0x0 0x6a00000>;
+		};
+
+		tenx_q6_buffer_mem: memory@c0000000 {
+			no-map;
+			reg = <0x0 0xc0000000 0x0 0x3200000>;
+		};
+
+		ipa_buffer_mem: memory@c3200000 {
+			no-map;
+			reg = <0x0 0xc3200000 0x0 0x12c00000>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@80000 {
+			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
+			reg = <0x0 0x80000 0x0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "sleep_clk";
+		};
+
+		gpi_dma0: dma-controller@900000  {
+			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
+			#dma-cells = <5>;
+			reg = <0x0 0x900000 0x0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			status = "ok";
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x9c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0xe3 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
+					 &clk_virt SLAVE_QUP_CORE_0 0>;
+			interconnect-names = "qup-core";
+			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
+			qcom,iommu-geometry = <0x40000000 0x10000000>;
+			qcom,iommu-dma = "fastmap";
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			uart0: serial@980000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				dmas = <&gpi_dma0 0 1 3 64 0>,
+					<&gpi_dma0 1 1 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				dmas = <&gpi_dma0 0 1 1 64 0>,
+					<&gpi_dma0 1 1 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				dmas = <&gpi_dma0 0 2 3 64 0>,
+					<&gpi_dma0 1 2 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				dmas = <&gpi_dma0 0 2 1 64 0>,
+					<&gpi_dma0 1 2 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				dmas = <&gpi_dma0 0 3 3 64 0>,
+					<&gpi_dma0 1 3 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				dmas = <&gpi_dma0 0 3 1 64 0>,
+					<&gpi_dma0 1 3 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				dmas = <&gpi_dma0 0 4 3 64 0>,
+					<&gpi_dma0 1 4 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				dmas = <&gpi_dma0 0 4 1 64 0>,
+					<&gpi_dma0 1 4 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				dmas = <&gpi_dma0 0 5 3 64 0>,
+					<&gpi_dma0 1 5 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				dmas = <&gpi_dma0 0 5 1 64 0>,
+					<&gpi_dma0 1 5 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				dmas = <&gpi_dma0 0 6 3 64 0>,
+					<&gpi_dma0 1 6 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				dmas = <&gpi_dma0 0 6 1 64 0>,
+					<&gpi_dma0 1 6 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart7: serial@99c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x99c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000  {
+			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
+			#dma-cells = <5>;
+			reg = <0x0 0xa00000 0x0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0x116 0x0>;
+			status = "ok";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xac0000 0x0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x103 0x0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-names = "m-ahb", "s-ahb";
+
+			ranges;
+			status = "disabled";
+
+			uart8: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				dmas = <&gpi_dma1 0 1 3 64 0>,
+					<&gpi_dma1 1 1 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				dmas = <&gpi_dma1 0 1 1 64 0>,
+					<&gpi_dma1 1 1 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				dmas = <&gpi_dma1 0 2 3 64 0>,
+					<&gpi_dma1 1 2 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				dmas = <&gpi_dma1 0 2 1 64 0>,
+					<&gpi_dma1 1 2 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,i2c-geni";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				dmas = <&gpi_dma1 0 3 3 64 0>,
+					<&gpi_dma1 1 3 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				dmas = <&gpi_dma1 0 3 1 64 0>,
+					<&gpi_dma1 1 3 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				dmas = <&gpi_dma1 0 4 3 64 0>,
+					<&gpi_dma1 1 4 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				dmas = <&gpi_dma1 0 4 1 64 0>,
+					<&gpi_dma1 1 4 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				dmas = <&gpi_dma1 0 5 3 64 0>,
+					<&gpi_dma1 1 5 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart13: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				dmas = <&gpi_dma1 0 5 1 64 0>,
+					<&gpi_dma1 1 5 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				dmas = <&gpi_dma1 0 6 3 64 0>,
+					<&gpi_dma1 1 6 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				dmas = <&gpi_dma1 0 6 1 64 0>,
+					<&gpi_dma1 1 6 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				dmas = <&gpi_dma1 0 7 3 64 0>,
+					<&gpi_dma1 1 7 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				dmas = <&gpi_dma1 0 7 1 64 0>,
+					<&gpi_dma1 1 7 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		system_noc: interconnect@1640000 {
+			reg = <0x0 0x1640000 0x0 0x45080>;
+			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x1f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,pdc";
+			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
+			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
+			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
+					  <94 609 31>, <125 63 1>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0xc400000 0x0 0x3000>,
+			      <0x0 0xc500000 0x0 0x400000>,
+			      <0x0 0xc440000 0x0 0x80000>,
+			      <0x0 0xc4c0000 0x0 0x10000>,
+			      <0x0 0xc42d000 0x0 0x4000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f000000 {
+			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
+			reg = <0x0 0xf000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 151>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart0_default: qup-uart0-default-state {
+				pins = "gpio6", "gpio7", "gpio8", "gpio9";
+				function = "qup00";
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk {
+				pins = "gpio10", "gpio11";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk {
+				pins = "gpio10", "gpio11", "gpio12";
+				function = "qup01";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs {
+				pins = "gpio13";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk {
+				pins = "gpio12", "gpio13";
+				function = "qup02";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk {
+				pins = "gpio12", "gpio13", "gpio10";
+				function = "qup02";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs {
+				pins = "gpio11";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk {
+				pins = "gpio14", "gpio15";
+				function = "qup03";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk {
+				pins = "gpio14", "gpio15", "gpio16";
+				function = "qup03";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs {
+				pins = "gpio17";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk {
+				pins = "gpio16", "gpio17";
+				function = "qup04";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk {
+				pins = "gpio16", "gpio17", "gpio14";
+				function = "qup04";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs {
+				pins = "gpio15";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk {
+				pins = "gpio130", "gpio131";
+				function = "qup05";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk {
+				pins = "gpio130", "gpio131", "gpio132";
+				function = "qup05";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs {
+				pins = "gpio133";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk {
+				pins = "gpio132", "gpio133";
+				function = "qup06";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk {
+				pins = "gpio132", "gpio133", "gpio130";
+				function = "qup06";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs {
+				pins = "gpio131";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart7_rx: qup-uart7-rx {
+				pins = "gpio135";
+				function = "qup07";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_tx: qup-uart7-tx  {
+				pins = "gpio134";
+				function = "qup07";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart8_default: qup-uart8-default {
+				pins = "gpio18", "gpio19", "gpio20", "gpio21";
+				function = "qup10";
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk {
+				pins = "gpio22", "gpio23";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk {
+				pins = "gpio22", "gpio23", "gpio24";
+				function = "qup11";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs {
+				pins = "gpio25";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk {
+				pins = "gpio24", "gpio25";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk {
+				pins = "gpio24", "gpio25", "gpio22";
+				function = "qup12";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs {
+				pins = "gpio23";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk {
+				pins = "gpio26", "gpio27";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk {
+				pins = "gpio26", "gpio27", "gpio28";
+				function = "qup13";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs {
+				pins = "gpio29";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk {
+				pins = "gpio28", "gpio29";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk {
+				pins = "gpio28", "gpio29", "gpio26";
+				function = "qup14";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs {
+				pins = "gpio27";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk {
+				pins = "gpio30", "gpio31";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk {
+				pins = "gpio30", "gpio31", "gpio32";
+				function = "qup15";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs {
+				pins = "gpio33";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart13_default: qup-uart13-default {
+				pins = "gpio30", "gpio31", "gpio32", "gpio33";
+				function = "qup15";
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk {
+				pins = "gpio34", "gpio35";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk {
+				pins = "gpio34", "gpio35", "gpio36";
+				function = "qup16";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_cs: qup-spi14-cs {
+				pins = "gpio37", "gpio38";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk {
+				pins = "gpio40", "gpio41";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk {
+				pins = "gpio40", "gpio41", "gpio30";
+				function = "qup17";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_cs: qup-spi15-cs {
+				pins = "gpio31";
+				drive-strength = <6>;
+				bias-disable;
+			};
+		};
+
+		apps_smmu: apps-smmu@15000000 {
+			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
+				"arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17200000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
+			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			reg = <0x0 0x17420000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17421000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17421000 0x0 0x1000>,
+				      <0x0 0x17422000 0x0 0x1000>;
+			};
+
+			frame@17423000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17423000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17425000 0x0 0x1000>,
+				      <0x0 0x17426000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17427000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17429000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x1742b000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x1742d000 0x0 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
+					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
+
+			apps_bcm_voter: bcm_voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,qdu1000-rpmh-clk", "qcom,qru1000-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,qdu1000-rpmhpd", "qcom,qru1000-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom, qdu1000-cpufreq-epss", "qcom, qru1000-cpufreq-epss",
+				"qcom,cpufreq-epss";
+			reg = <0x0 0x17d91000 0x0 0x1000>;
+			reg-names = "freq-domain0";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0";
+			#freq-domain-cells = <1>;
+		};
+
+		gem_noc: interconnect@19100000 {
+			reg = <0x0 0x19100000 0x0 0xB8080>;
+			compatible = "qcom,qdu1000-gem-noc", "qcom,qru1000-gem-noc";
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		arch_timer: timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+			clock-frequency = <19200000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
new file mode 100644
index 000000000000..074fe126e85e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
@@ -0,0 +1,27 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "qdu1000.dtsi"
+
+&reserved_memory {
+	/delete-node/ memory@a0000000;
+	/delete-node/ memory@b9600000;
+	/delete-node/ memory@c0000000;
+
+	oem_tenx_mem: memory@a0000000 {
+		no-map;
+		reg = <0x0 0xa0000000 0x0 0x6400000>;
+	};
+
+	mpss_diag_buffer_mem: memory@aea00000 {
+		no-map;
+		reg = <0x0 0xaea00000 0x0 0x6400000>;
+	};
+
+	tenx_q6_buffer_mem: memory@b4e00000 {
+		no-map;
+		reg = <0x0 0xb4e00000 0x0 0x3200000>;
+	};
+};