diff mbox series

arm64: dts: qcom: qrb5165-rb5: Disable cpuidle states

Message ID 20221018145348.4051809-1-amit.pundir@linaro.org (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: qrb5165-rb5: Disable cpuidle states | expand

Commit Message

Amit Pundir Oct. 18, 2022, 2:53 p.m. UTC
Disable cpuidle states for RB5. These cpuidle states
made the device highly unstable and it runs into the
following crash frequently:

[    T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
[    T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
[    T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110

Fixes: 32bc936d7321 ("arm64: dts: qcom: sm8250: Add cpuidle states")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
---
 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Ulf Hansson Oct. 19, 2022, 11:57 a.m. UTC | #1
On Tue, 18 Oct 2022 at 16:53, Amit Pundir <amit.pundir@linaro.org> wrote:
>
> Disable cpuidle states for RB5. These cpuidle states
> made the device highly unstable and it runs into the
> following crash frequently:
>
> [    T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> [    T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> [    T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
>
> Fixes: 32bc936d7321 ("arm64: dts: qcom: sm8250: Add cpuidle states")
> Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> index cc003535a3c5..f936c41bfbea 100644
> --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> @@ -251,6 +251,14 @@ qca639x: qca639x {
>
>  };
>
> +&LITTLE_CPU_SLEEP_0 {
> +       status = "disabled";
> +};
> +
> +&BIG_CPU_SLEEP_0 {
> +       status = "disabled";
> +};
> +
>  &adsp {
>         status = "okay";
>         firmware-name = "qcom/sm8250/adsp.mbn";
> --
> 2.25.1

Disabling the CPU idlestates, will revert us back to using only the WFI state.

An option that probably works too is to just drop the idlestate for
the CPU cluster. Would you mind trying the below and see if that works
too?

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index c32227ea40f9..c707a49e8001 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -700,7 +700,6 @@ CPU_PD7: cpu7 {

                CLUSTER_PD: cpu-cluster0 {
                        #power-domain-cells = <0>;
-                       domain-idle-states = <&CLUSTER_SLEEP_0>;
                };
        };

Kind regards
Uffe
Amit Pundir Oct. 19, 2022, 3:34 p.m. UTC | #2
On Wed, 19 Oct 2022 at 17:28, Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> On Tue, 18 Oct 2022 at 16:53, Amit Pundir <amit.pundir@linaro.org> wrote:
> >
> > Disable cpuidle states for RB5. These cpuidle states
> > made the device highly unstable and it runs into the
> > following crash frequently:
> >
> > [    T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> > [    T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> > [    T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
> >
> > Fixes: 32bc936d7321 ("arm64: dts: qcom: sm8250: Add cpuidle states")
> > Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > index cc003535a3c5..f936c41bfbea 100644
> > --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > @@ -251,6 +251,14 @@ qca639x: qca639x {
> >
> >  };
> >
> > +&LITTLE_CPU_SLEEP_0 {
> > +       status = "disabled";
> > +};
> > +
> > +&BIG_CPU_SLEEP_0 {
> > +       status = "disabled";
> > +};
> > +
> >  &adsp {
> >         status = "okay";
> >         firmware-name = "qcom/sm8250/adsp.mbn";
> > --
> > 2.25.1
>
> Disabling the CPU idlestates, will revert us back to using only the WFI state.
>
> An option that probably works too is to just drop the idlestate for
> the CPU cluster. Would you mind trying the below and see if that works
> too?

Following change works too for my RB5 setup.
I didn't see any obvious regression in my limited (~10) test runs so far.

Regards,
Amit Pundir

>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index c32227ea40f9..c707a49e8001 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -700,7 +700,6 @@ CPU_PD7: cpu7 {
>
>                 CLUSTER_PD: cpu-cluster0 {
>                         #power-domain-cells = <0>;
> -                       domain-idle-states = <&CLUSTER_SLEEP_0>;
>                 };
>         };
>
> Kind regards
> Uffe
Sudeep Holla Oct. 20, 2022, 9:30 a.m. UTC | #3
On Wed, Oct 19, 2022 at 01:57:34PM +0200, Ulf Hansson wrote:
> On Tue, 18 Oct 2022 at 16:53, Amit Pundir <amit.pundir@linaro.org> wrote:
> >
> > Disable cpuidle states for RB5. These cpuidle states
> > made the device highly unstable and it runs into the
> > following crash frequently:
> >
> > [    T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> > [    T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> > [    T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
> >
> > Fixes: 32bc936d7321 ("arm64: dts: qcom: sm8250: Add cpuidle states")
> > Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > index cc003535a3c5..f936c41bfbea 100644
> > --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > @@ -251,6 +251,14 @@ qca639x: qca639x {
> >
> >  };
> >
> > +&LITTLE_CPU_SLEEP_0 {
> > +       status = "disabled";
> > +};
> > +
> > +&BIG_CPU_SLEEP_0 {
> > +       status = "disabled";
> > +};
> > +
> >  &adsp {
> >         status = "okay";
> >         firmware-name = "qcom/sm8250/adsp.mbn";
> > --
> > 2.25.1
> 
> Disabling the CPU idlestates, will revert us back to using only the WFI state.
> 
> An option that probably works too is to just drop the idlestate for
> the CPU cluster. Would you mind trying the below and see if that works
> too?
>

Indeed this is was I suggested to check initially. But I was surprised to
see IIUC, Amit just disabled CPU states with above change and got it working.
So it is not cluster state alone causing the issue, is it somehow presence
of both cpu and cluster states ? Am I missing something here.

> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index c32227ea40f9..c707a49e8001 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -700,7 +700,6 @@ CPU_PD7: cpu7 {
> 
>                 CLUSTER_PD: cpu-cluster0 {
>                         #power-domain-cells = <0>;
> -                       domain-idle-states = <&CLUSTER_SLEEP_0>;

How about just marking CLUSTER_SLEEP_0 state disabled ? That looks cleaner
than deleting this domain-idle-states property here. Also not sure if DTS
warnings will appear if you delete this ?
Amit Pundir Oct. 20, 2022, 2:08 p.m. UTC | #4
On Thu, 20 Oct 2022 at 15:01, Sudeep Holla <sudeep.holla@arm.com> wrote:
>
> On Wed, Oct 19, 2022 at 01:57:34PM +0200, Ulf Hansson wrote:
> > On Tue, 18 Oct 2022 at 16:53, Amit Pundir <amit.pundir@linaro.org> wrote:
> > >
> > > Disable cpuidle states for RB5. These cpuidle states
> > > made the device highly unstable and it runs into the
> > > following crash frequently:
> > >
> > > [    T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> > > [    T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> > > [    T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
> > >
> > > Fixes: 32bc936d7321 ("arm64: dts: qcom: sm8250: Add cpuidle states")
> > > Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> > > ---
> > >  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 ++++++++
> > >  1 file changed, 8 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > index cc003535a3c5..f936c41bfbea 100644
> > > --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > @@ -251,6 +251,14 @@ qca639x: qca639x {
> > >
> > >  };
> > >
> > > +&LITTLE_CPU_SLEEP_0 {
> > > +       status = "disabled";
> > > +};
> > > +
> > > +&BIG_CPU_SLEEP_0 {
> > > +       status = "disabled";
> > > +};
> > > +
> > >  &adsp {
> > >         status = "okay";
> > >         firmware-name = "qcom/sm8250/adsp.mbn";
> > > --
> > > 2.25.1
> >
> > Disabling the CPU idlestates, will revert us back to using only the WFI state.
> >
> > An option that probably works too is to just drop the idlestate for
> > the CPU cluster. Would you mind trying the below and see if that works
> > too?
> >
>
> Indeed this is was I suggested to check initially. But I was surprised to
> see IIUC, Amit just disabled CPU states with above change and got it working.
> So it is not cluster state alone causing the issue, is it somehow presence
> of both cpu and cluster states ? Am I missing something here.
>
> > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > index c32227ea40f9..c707a49e8001 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > @@ -700,7 +700,6 @@ CPU_PD7: cpu7 {
> >
> >                 CLUSTER_PD: cpu-cluster0 {
> >                         #power-domain-cells = <0>;
> > -                       domain-idle-states = <&CLUSTER_SLEEP_0>;
>
> How about just marking CLUSTER_SLEEP_0 state disabled ? That looks cleaner
> than deleting this domain-idle-states property here. Also not sure if DTS
> warnings will appear if you delete this ?

Hi, I did try disabling CLUSTER_SLEEP_0: cluster-sleep-0 {} in
domain-idle-states {} but that didn't help. That's why I end up
disabling individual cpu states in idle-states {}.

Regards,
Amit Pundir


>
> --
> Regards,
> Sudeep
Ulf Hansson Oct. 20, 2022, 2:40 p.m. UTC | #5
On Thu, 20 Oct 2022 at 16:09, Amit Pundir <amit.pundir@linaro.org> wrote:
>
> On Thu, 20 Oct 2022 at 15:01, Sudeep Holla <sudeep.holla@arm.com> wrote:
> >
> > On Wed, Oct 19, 2022 at 01:57:34PM +0200, Ulf Hansson wrote:
> > > On Tue, 18 Oct 2022 at 16:53, Amit Pundir <amit.pundir@linaro.org> wrote:
> > > >
> > > > Disable cpuidle states for RB5. These cpuidle states
> > > > made the device highly unstable and it runs into the
> > > > following crash frequently:
> > > >
> > > > [    T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> > > > [    T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> > > > [    T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
> > > >
> > > > Fixes: 32bc936d7321 ("arm64: dts: qcom: sm8250: Add cpuidle states")
> > > > Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> > > > ---
> > > >  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 ++++++++
> > > >  1 file changed, 8 insertions(+)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > index cc003535a3c5..f936c41bfbea 100644
> > > > --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > @@ -251,6 +251,14 @@ qca639x: qca639x {
> > > >
> > > >  };
> > > >
> > > > +&LITTLE_CPU_SLEEP_0 {
> > > > +       status = "disabled";
> > > > +};
> > > > +
> > > > +&BIG_CPU_SLEEP_0 {
> > > > +       status = "disabled";
> > > > +};
> > > > +
> > > >  &adsp {
> > > >         status = "okay";
> > > >         firmware-name = "qcom/sm8250/adsp.mbn";
> > > > --
> > > > 2.25.1
> > >
> > > Disabling the CPU idlestates, will revert us back to using only the WFI state.
> > >
> > > An option that probably works too is to just drop the idlestate for
> > > the CPU cluster. Would you mind trying the below and see if that works
> > > too?
> > >
> >
> > Indeed this is was I suggested to check initially. But I was surprised to
> > see IIUC, Amit just disabled CPU states with above change and got it working.
> > So it is not cluster state alone causing the issue, is it somehow presence
> > of both cpu and cluster states ? Am I missing something here.
> >
> > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > index c32227ea40f9..c707a49e8001 100644
> > > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > @@ -700,7 +700,6 @@ CPU_PD7: cpu7 {
> > >
> > >                 CLUSTER_PD: cpu-cluster0 {
> > >                         #power-domain-cells = <0>;
> > > -                       domain-idle-states = <&CLUSTER_SLEEP_0>;
> >
> > How about just marking CLUSTER_SLEEP_0 state disabled ? That looks cleaner
> > than deleting this domain-idle-states property here. Also not sure if DTS
> > warnings will appear if you delete this ?
>
> Hi, I did try disabling CLUSTER_SLEEP_0: cluster-sleep-0 {} in
> domain-idle-states {} but that didn't help. That's why I end up
> disabling individual cpu states in idle-states {}.

Yep, this boils down to the fact that genpd doesn't check whether the
domain-idle-state is disabled by using of_device_is_available(). See
genpd_iterate_idle_states().

That said, I suggest we go with the above one-line change. It may not
be as clean as it could be, but certainly easy to revert when the
support for it has been added in a newer kernel.

Amit, do you want me to post a new patch or do you prefer to re-spin
your patch? It doesn't matter to me.

Kind regards
Uffe
Amit Pundir Oct. 20, 2022, 3:33 p.m. UTC | #6
On Thu, 20 Oct 2022 at 20:10, Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> On Thu, 20 Oct 2022 at 16:09, Amit Pundir <amit.pundir@linaro.org> wrote:
> >
> > On Thu, 20 Oct 2022 at 15:01, Sudeep Holla <sudeep.holla@arm.com> wrote:
> > >
> > > On Wed, Oct 19, 2022 at 01:57:34PM +0200, Ulf Hansson wrote:
> > > > On Tue, 18 Oct 2022 at 16:53, Amit Pundir <amit.pundir@linaro.org> wrote:
> > > > >
> > > > > Disable cpuidle states for RB5. These cpuidle states
> > > > > made the device highly unstable and it runs into the
> > > > > following crash frequently:
> > > > >
> > > > > [    T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> > > > > [    T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> > > > > [    T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
> > > > >
> > > > > Fixes: 32bc936d7321 ("arm64: dts: qcom: sm8250: Add cpuidle states")
> > > > > Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> > > > > ---
> > > > >  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 ++++++++
> > > > >  1 file changed, 8 insertions(+)
> > > > >
> > > > > diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > > index cc003535a3c5..f936c41bfbea 100644
> > > > > --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > > +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > > @@ -251,6 +251,14 @@ qca639x: qca639x {
> > > > >
> > > > >  };
> > > > >
> > > > > +&LITTLE_CPU_SLEEP_0 {
> > > > > +       status = "disabled";
> > > > > +};
> > > > > +
> > > > > +&BIG_CPU_SLEEP_0 {
> > > > > +       status = "disabled";
> > > > > +};
> > > > > +
> > > > >  &adsp {
> > > > >         status = "okay";
> > > > >         firmware-name = "qcom/sm8250/adsp.mbn";
> > > > > --
> > > > > 2.25.1
> > > >
> > > > Disabling the CPU idlestates, will revert us back to using only the WFI state.
> > > >
> > > > An option that probably works too is to just drop the idlestate for
> > > > the CPU cluster. Would you mind trying the below and see if that works
> > > > too?
> > > >
> > >
> > > Indeed this is was I suggested to check initially. But I was surprised to
> > > see IIUC, Amit just disabled CPU states with above change and got it working.
> > > So it is not cluster state alone causing the issue, is it somehow presence
> > > of both cpu and cluster states ? Am I missing something here.
> > >
> > > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > index c32227ea40f9..c707a49e8001 100644
> > > > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > @@ -700,7 +700,6 @@ CPU_PD7: cpu7 {
> > > >
> > > >                 CLUSTER_PD: cpu-cluster0 {
> > > >                         #power-domain-cells = <0>;
> > > > -                       domain-idle-states = <&CLUSTER_SLEEP_0>;
> > >
> > > How about just marking CLUSTER_SLEEP_0 state disabled ? That looks cleaner
> > > than deleting this domain-idle-states property here. Also not sure if DTS
> > > warnings will appear if you delete this ?
> >
> > Hi, I did try disabling CLUSTER_SLEEP_0: cluster-sleep-0 {} in
> > domain-idle-states {} but that didn't help. That's why I end up
> > disabling individual cpu states in idle-states {}.
>
> Yep, this boils down to the fact that genpd doesn't check whether the
> domain-idle-state is disabled by using of_device_is_available(). See
> genpd_iterate_idle_states().
>
> That said, I suggest we go with the above one-line change. It may not
> be as clean as it could be, but certainly easy to revert when the
> support for it has been added in a newer kernel.
>
> Amit, do you want me to post a new patch or do you prefer to re-spin
> your patch? It doesn't matter to me.

Sent. Thanks.

Regards,
Amit Pundir

>
> Kind regards
> Uffe
Sudeep Holla Oct. 20, 2022, 4:16 p.m. UTC | #7
On Thu, Oct 20, 2022 at 04:40:15PM +0200, Ulf Hansson wrote:
> On Thu, 20 Oct 2022 at 16:09, Amit Pundir <amit.pundir@linaro.org> wrote:
> >
> > On Thu, 20 Oct 2022 at 15:01, Sudeep Holla <sudeep.holla@arm.com> wrote:
> > >
> > > On Wed, Oct 19, 2022 at 01:57:34PM +0200, Ulf Hansson wrote:
> > > > On Tue, 18 Oct 2022 at 16:53, Amit Pundir <amit.pundir@linaro.org> wrote:
> > > > >
> > > > > Disable cpuidle states for RB5. These cpuidle states
> > > > > made the device highly unstable and it runs into the
> > > > > following crash frequently:
> > > > >
> > > > > [    T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> > > > > [    T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> > > > > [    T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
> > > > >
> > > > > Fixes: 32bc936d7321 ("arm64: dts: qcom: sm8250: Add cpuidle states")
> > > > > Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> > > > > ---
> > > > >  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 ++++++++
> > > > >  1 file changed, 8 insertions(+)
> > > > >
> > > > > diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > > index cc003535a3c5..f936c41bfbea 100644
> > > > > --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > > +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > > @@ -251,6 +251,14 @@ qca639x: qca639x {
> > > > >
> > > > >  };
> > > > >
> > > > > +&LITTLE_CPU_SLEEP_0 {
> > > > > +       status = "disabled";
> > > > > +};
> > > > > +
> > > > > +&BIG_CPU_SLEEP_0 {
> > > > > +       status = "disabled";
> > > > > +};
> > > > > +
> > > > >  &adsp {
> > > > >         status = "okay";
> > > > >         firmware-name = "qcom/sm8250/adsp.mbn";
> > > > > --
> > > > > 2.25.1
> > > >
> > > > Disabling the CPU idlestates, will revert us back to using only the WFI state.
> > > >
> > > > An option that probably works too is to just drop the idlestate for
> > > > the CPU cluster. Would you mind trying the below and see if that works
> > > > too?
> > > >
> > >
> > > Indeed this is was I suggested to check initially. But I was surprised to
> > > see IIUC, Amit just disabled CPU states with above change and got it working.
> > > So it is not cluster state alone causing the issue, is it somehow presence
> > > of both cpu and cluster states ? Am I missing something here.
> > >
> > > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > index c32227ea40f9..c707a49e8001 100644
> > > > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > @@ -700,7 +700,6 @@ CPU_PD7: cpu7 {
> > > >
> > > >                 CLUSTER_PD: cpu-cluster0 {
> > > >                         #power-domain-cells = <0>;
> > > > -                       domain-idle-states = <&CLUSTER_SLEEP_0>;
> > >
> > > How about just marking CLUSTER_SLEEP_0 state disabled ? That looks cleaner
> > > than deleting this domain-idle-states property here. Also not sure if DTS
> > > warnings will appear if you delete this ?
> >
> > Hi, I did try disabling CLUSTER_SLEEP_0: cluster-sleep-0 {} in
> > domain-idle-states {} but that didn't help. That's why I end up
> > disabling individual cpu states in idle-states {}.
> 
> Yep, this boils down to the fact that genpd doesn't check whether the
> domain-idle-state is disabled by using of_device_is_available(). See
> genpd_iterate_idle_states().
> 

Yes I found that but can't that be fixed with a simple patch like below ?

> That said, I suggest we go with the above one-line change. It may not
> be as clean as it could be, but certainly easy to revert when the
> support for it has been added in a newer kernel.
>

I don't like removing the state. It means it doesn't have the state rather
than i"it has state but is not working and hence disabled".

Will handling the availability of the state cause any issues ?

Regards,
Sudeep

-->8

diff --git i/drivers/base/power/domain.c w/drivers/base/power/domain.c
index ead135c7044c..6471b559230e 100644
--- i/drivers/base/power/domain.c
+++ w/drivers/base/power/domain.c
@@ -2952,6 +2952,10 @@ static int genpd_iterate_idle_states(struct device_node *dn,
                np = it.node;
                if (!of_match_node(idle_state_match, np))
                        continue;
+
+               if (!of_device_is_available(np))
+                       continue;
+
                if (states) {
                        ret = genpd_parse_state(&states[i], np);
                        if (ret) {
Ulf Hansson Oct. 21, 2022, 1:02 p.m. UTC | #8
On Thu, 20 Oct 2022 at 18:16, Sudeep Holla <sudeep.holla@arm.com> wrote:
>
> On Thu, Oct 20, 2022 at 04:40:15PM +0200, Ulf Hansson wrote:
> > On Thu, 20 Oct 2022 at 16:09, Amit Pundir <amit.pundir@linaro.org> wrote:
> > >
> > > On Thu, 20 Oct 2022 at 15:01, Sudeep Holla <sudeep.holla@arm.com> wrote:
> > > >
> > > > On Wed, Oct 19, 2022 at 01:57:34PM +0200, Ulf Hansson wrote:
> > > > > On Tue, 18 Oct 2022 at 16:53, Amit Pundir <amit.pundir@linaro.org> wrote:
> > > > > >
> > > > > > Disable cpuidle states for RB5. These cpuidle states
> > > > > > made the device highly unstable and it runs into the
> > > > > > following crash frequently:
> > > > > >
> > > > > > [    T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> > > > > > [    T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> > > > > > [    T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
> > > > > >
> > > > > > Fixes: 32bc936d7321 ("arm64: dts: qcom: sm8250: Add cpuidle states")
> > > > > > Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> > > > > > ---
> > > > > >  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 ++++++++
> > > > > >  1 file changed, 8 insertions(+)
> > > > > >
> > > > > > diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > > > index cc003535a3c5..f936c41bfbea 100644
> > > > > > --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > > > +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > > > @@ -251,6 +251,14 @@ qca639x: qca639x {
> > > > > >
> > > > > >  };
> > > > > >
> > > > > > +&LITTLE_CPU_SLEEP_0 {
> > > > > > +       status = "disabled";
> > > > > > +};
> > > > > > +
> > > > > > +&BIG_CPU_SLEEP_0 {
> > > > > > +       status = "disabled";
> > > > > > +};
> > > > > > +
> > > > > >  &adsp {
> > > > > >         status = "okay";
> > > > > >         firmware-name = "qcom/sm8250/adsp.mbn";
> > > > > > --
> > > > > > 2.25.1
> > > > >
> > > > > Disabling the CPU idlestates, will revert us back to using only the WFI state.
> > > > >
> > > > > An option that probably works too is to just drop the idlestate for
> > > > > the CPU cluster. Would you mind trying the below and see if that works
> > > > > too?
> > > > >
> > > >
> > > > Indeed this is was I suggested to check initially. But I was surprised to
> > > > see IIUC, Amit just disabled CPU states with above change and got it working.
> > > > So it is not cluster state alone causing the issue, is it somehow presence
> > > > of both cpu and cluster states ? Am I missing something here.
> > > >
> > > > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > > b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > > index c32227ea40f9..c707a49e8001 100644
> > > > > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > > @@ -700,7 +700,6 @@ CPU_PD7: cpu7 {
> > > > >
> > > > >                 CLUSTER_PD: cpu-cluster0 {
> > > > >                         #power-domain-cells = <0>;
> > > > > -                       domain-idle-states = <&CLUSTER_SLEEP_0>;
> > > >
> > > > How about just marking CLUSTER_SLEEP_0 state disabled ? That looks cleaner
> > > > than deleting this domain-idle-states property here. Also not sure if DTS
> > > > warnings will appear if you delete this ?
> > >
> > > Hi, I did try disabling CLUSTER_SLEEP_0: cluster-sleep-0 {} in
> > > domain-idle-states {} but that didn't help. That's why I end up
> > > disabling individual cpu states in idle-states {}.
> >
> > Yep, this boils down to the fact that genpd doesn't check whether the
> > domain-idle-state is disabled by using of_device_is_available(). See
> > genpd_iterate_idle_states().
> >
>
> Yes I found that but can't that be fixed with a simple patch like below ?

Sure, yes it can.

Although, it does complicate things a bit, as we would need two
patches instead of one, to get things working.

>
> > That said, I suggest we go with the above one-line change. It may not
> > be as clean as it could be, but certainly easy to revert when the
> > support for it has been added in a newer kernel.
> >
>
> I don't like removing the state. It means it doesn't have the state rather
> than i"it has state but is not working and hence disabled".
>
> Will handling the availability of the state cause any issues ?

No, this works fine. It's already been proven by Amit's test.

>
> Regards,
> Sudeep
>
> -->8
>
> diff --git i/drivers/base/power/domain.c w/drivers/base/power/domain.c
> index ead135c7044c..6471b559230e 100644
> --- i/drivers/base/power/domain.c
> +++ w/drivers/base/power/domain.c
> @@ -2952,6 +2952,10 @@ static int genpd_iterate_idle_states(struct device_node *dn,
>                 np = it.node;
>                 if (!of_match_node(idle_state_match, np))
>                         continue;
> +
> +               if (!of_device_is_available(np))
> +                       continue;
> +
>                 if (states) {
>                         ret = genpd_parse_state(&states[i], np);
>                         if (ret) {
>

The above code looks correct to me. Anyone that wants to submit the
patches? Otherwise I can try to manage it...

Kind regards
Uffe
Amit Pundir Oct. 25, 2022, 11:23 a.m. UTC | #9
On Fri, 21 Oct 2022 at 18:33, Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> On Thu, 20 Oct 2022 at 18:16, Sudeep Holla <sudeep.holla@arm.com> wrote:
> >
> > On Thu, Oct 20, 2022 at 04:40:15PM +0200, Ulf Hansson wrote:
> > > On Thu, 20 Oct 2022 at 16:09, Amit Pundir <amit.pundir@linaro.org> wrote:
> > > >
> > > > On Thu, 20 Oct 2022 at 15:01, Sudeep Holla <sudeep.holla@arm.com> wrote:
> > > > >
> > > > > On Wed, Oct 19, 2022 at 01:57:34PM +0200, Ulf Hansson wrote:
> > > > > > On Tue, 18 Oct 2022 at 16:53, Amit Pundir <amit.pundir@linaro.org> wrote:
> > > > > > >
> > > > > > > Disable cpuidle states for RB5. These cpuidle states
> > > > > > > made the device highly unstable and it runs into the
> > > > > > > following crash frequently:
> > > > > > >
> > > > > > > [    T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> > > > > > > [    T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> > > > > > > [    T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
> > > > > > >
> > > > > > > Fixes: 32bc936d7321 ("arm64: dts: qcom: sm8250: Add cpuidle states")
> > > > > > > Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> > > > > > > ---
> > > > > > >  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 ++++++++
> > > > > > >  1 file changed, 8 insertions(+)
> > > > > > >
> > > > > > > diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > > > > index cc003535a3c5..f936c41bfbea 100644
> > > > > > > --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > > > > +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > > > > @@ -251,6 +251,14 @@ qca639x: qca639x {
> > > > > > >
> > > > > > >  };
> > > > > > >
> > > > > > > +&LITTLE_CPU_SLEEP_0 {
> > > > > > > +       status = "disabled";
> > > > > > > +};
> > > > > > > +
> > > > > > > +&BIG_CPU_SLEEP_0 {
> > > > > > > +       status = "disabled";
> > > > > > > +};
> > > > > > > +
> > > > > > >  &adsp {
> > > > > > >         status = "okay";
> > > > > > >         firmware-name = "qcom/sm8250/adsp.mbn";
> > > > > > > --
> > > > > > > 2.25.1
> > > > > >
> > > > > > Disabling the CPU idlestates, will revert us back to using only the WFI state.
> > > > > >
> > > > > > An option that probably works too is to just drop the idlestate for
> > > > > > the CPU cluster. Would you mind trying the below and see if that works
> > > > > > too?
> > > > > >
> > > > >
> > > > > Indeed this is was I suggested to check initially. But I was surprised to
> > > > > see IIUC, Amit just disabled CPU states with above change and got it working.
> > > > > So it is not cluster state alone causing the issue, is it somehow presence
> > > > > of both cpu and cluster states ? Am I missing something here.
> > > > >
> > > > > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > > > b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > > > index c32227ea40f9..c707a49e8001 100644
> > > > > > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > > > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > > > @@ -700,7 +700,6 @@ CPU_PD7: cpu7 {
> > > > > >
> > > > > >                 CLUSTER_PD: cpu-cluster0 {
> > > > > >                         #power-domain-cells = <0>;
> > > > > > -                       domain-idle-states = <&CLUSTER_SLEEP_0>;
> > > > >
> > > > > How about just marking CLUSTER_SLEEP_0 state disabled ? That looks cleaner
> > > > > than deleting this domain-idle-states property here. Also not sure if DTS
> > > > > warnings will appear if you delete this ?
> > > >
> > > > Hi, I did try disabling CLUSTER_SLEEP_0: cluster-sleep-0 {} in
> > > > domain-idle-states {} but that didn't help. That's why I end up
> > > > disabling individual cpu states in idle-states {}.
> > >
> > > Yep, this boils down to the fact that genpd doesn't check whether the
> > > domain-idle-state is disabled by using of_device_is_available(). See
> > > genpd_iterate_idle_states().
> > >
> >
> > Yes I found that but can't that be fixed with a simple patch like below ?
>
> Sure, yes it can.
>
> Although, it does complicate things a bit, as we would need two
> patches instead of one, to get things working.
>
> >
> > > That said, I suggest we go with the above one-line change. It may not
> > > be as clean as it could be, but certainly easy to revert when the
> > > support for it has been added in a newer kernel.
> > >
> >
> > I don't like removing the state. It means it doesn't have the state rather
> > than i"it has state but is not working and hence disabled".
> >
> > Will handling the availability of the state cause any issues ?
>
> No, this works fine. It's already been proven by Amit's test.
>
> >
> > Regards,
> > Sudeep
> >
> > -->8
> >
> > diff --git i/drivers/base/power/domain.c w/drivers/base/power/domain.c
> > index ead135c7044c..6471b559230e 100644
> > --- i/drivers/base/power/domain.c
> > +++ w/drivers/base/power/domain.c
> > @@ -2952,6 +2952,10 @@ static int genpd_iterate_idle_states(struct device_node *dn,
> >                 np = it.node;
> >                 if (!of_match_node(idle_state_match, np))
> >                         continue;
> > +
> > +               if (!of_device_is_available(np))
> > +                       continue;
> > +
> >                 if (states) {
> >                         ret = genpd_parse_state(&states[i], np);
> >                         if (ret) {
> >
>
> The above code looks correct to me. Anyone that wants to submit the
> patches? Otherwise I can try to manage it...

Just out of curiosity, I gave this patch a test run and, as Ulf also
mentioned above, this patch alone is not enough to fix the boot
regression I see on RB5.

Regards,
Amit Pundir

>
> Kind regards
> Uffe
Sudeep Holla Oct. 25, 2022, 12:12 p.m. UTC | #10
On Tue, Oct 25, 2022 at 04:53:51PM +0530, Amit Pundir wrote:
> On Fri, 21 Oct 2022 at 18:33, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> >
> > On Thu, 20 Oct 2022 at 18:16, Sudeep Holla <sudeep.holla@arm.com> wrote:
> > >
> > > On Thu, Oct 20, 2022 at 04:40:15PM +0200, Ulf Hansson wrote:
> > > > On Thu, 20 Oct 2022 at 16:09, Amit Pundir <amit.pundir@linaro.org> wrote:
> > > > >
> > > > > On Thu, 20 Oct 2022 at 15:01, Sudeep Holla <sudeep.holla@arm.com> wrote:
> > > > > >
> > > > > > On Wed, Oct 19, 2022 at 01:57:34PM +0200, Ulf Hansson wrote:
> > > > > > > On Tue, 18 Oct 2022 at 16:53, Amit Pundir <amit.pundir@linaro.org> wrote:
> > > > > > > >
> > > > > > > > Disable cpuidle states for RB5. These cpuidle states
> > > > > > > > made the device highly unstable and it runs into the
> > > > > > > > following crash frequently:
> > > > > > > >
> > > > > > > > [    T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> > > > > > > > [    T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> > > > > > > > [    T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
> > > > > > > >
> > > > > > > > Fixes: 32bc936d7321 ("arm64: dts: qcom: sm8250: Add cpuidle states")
> > > > > > > > Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> > > > > > > > ---
> > > > > > > >  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 ++++++++
> > > > > > > >  1 file changed, 8 insertions(+)
> > > > > > > >
> > > > > > > > diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > > > > > index cc003535a3c5..f936c41bfbea 100644
> > > > > > > > --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > > > > > +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> > > > > > > > @@ -251,6 +251,14 @@ qca639x: qca639x {
> > > > > > > >
> > > > > > > >  };
> > > > > > > >
> > > > > > > > +&LITTLE_CPU_SLEEP_0 {
> > > > > > > > +       status = "disabled";
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +&BIG_CPU_SLEEP_0 {
> > > > > > > > +       status = "disabled";
> > > > > > > > +};
> > > > > > > > +
> > > > > > > >  &adsp {
> > > > > > > >         status = "okay";
> > > > > > > >         firmware-name = "qcom/sm8250/adsp.mbn";
> > > > > > > > --
> > > > > > > > 2.25.1
> > > > > > >
> > > > > > > Disabling the CPU idlestates, will revert us back to using only the WFI state.
> > > > > > >
> > > > > > > An option that probably works too is to just drop the idlestate for
> > > > > > > the CPU cluster. Would you mind trying the below and see if that works
> > > > > > > too?
> > > > > > >
> > > > > >
> > > > > > Indeed this is was I suggested to check initially. But I was surprised to
> > > > > > see IIUC, Amit just disabled CPU states with above change and got it working.
> > > > > > So it is not cluster state alone causing the issue, is it somehow presence
> > > > > > of both cpu and cluster states ? Am I missing something here.
> > > > > >
> > > > > > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > > > > b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > > > > index c32227ea40f9..c707a49e8001 100644
> > > > > > > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > > > > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > > > > @@ -700,7 +700,6 @@ CPU_PD7: cpu7 {
> > > > > > >
> > > > > > >                 CLUSTER_PD: cpu-cluster0 {
> > > > > > >                         #power-domain-cells = <0>;
> > > > > > > -                       domain-idle-states = <&CLUSTER_SLEEP_0>;
> > > > > >
> > > > > > How about just marking CLUSTER_SLEEP_0 state disabled ? That looks cleaner
> > > > > > than deleting this domain-idle-states property here. Also not sure if DTS
> > > > > > warnings will appear if you delete this ?
> > > > >
> > > > > Hi, I did try disabling CLUSTER_SLEEP_0: cluster-sleep-0 {} in
> > > > > domain-idle-states {} but that didn't help. That's why I end up
> > > > > disabling individual cpu states in idle-states {}.
> > > >
> > > > Yep, this boils down to the fact that genpd doesn't check whether the
> > > > domain-idle-state is disabled by using of_device_is_available(). See
> > > > genpd_iterate_idle_states().
> > > >
> > >
> > > Yes I found that but can't that be fixed with a simple patch like below ?
> >
> > Sure, yes it can.
> >
> > Although, it does complicate things a bit, as we would need two
> > patches instead of one, to get things working.
> >
> > >
> > > > That said, I suggest we go with the above one-line change. It may not
> > > > be as clean as it could be, but certainly easy to revert when the
> > > > support for it has been added in a newer kernel.
> > > >
> > >
> > > I don't like removing the state. It means it doesn't have the state rather
> > > than i"it has state but is not working and hence disabled".
> > >
> > > Will handling the availability of the state cause any issues ?
> >
> > No, this works fine. It's already been proven by Amit's test.
> >
> > >
> > > Regards,
> > > Sudeep
> > >
> > > -->8
> > >
> > > diff --git i/drivers/base/power/domain.c w/drivers/base/power/domain.c
> > > index ead135c7044c..6471b559230e 100644
> > > --- i/drivers/base/power/domain.c
> > > +++ w/drivers/base/power/domain.c
> > > @@ -2952,6 +2952,10 @@ static int genpd_iterate_idle_states(struct device_node *dn,
> > >                 np = it.node;
> > >                 if (!of_match_node(idle_state_match, np))
> > >                         continue;
> > > +
> > > +               if (!of_device_is_available(np))
> > > +                       continue;
> > > +
> > >                 if (states) {
> > >                         ret = genpd_parse_state(&states[i], np);
> > >                         if (ret) {
> > >
> >
> > The above code looks correct to me. Anyone that wants to submit the
> > patches? Otherwise I can try to manage it...
> 
> Just out of curiosity, I gave this patch a test run and, as Ulf also
> mentioned above, this patch alone is not enough to fix the boot
> regression I see on RB5.
>

Indeed, Ulf has posted the other changes needed and I have reviewed it
just now. I can post this one. I agree it is multiple change but I think
it is right set as we need to fix all these anyways, why not at once.
Though they are multiple changes, the delta is not too much in my opinion.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index cc003535a3c5..f936c41bfbea 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -251,6 +251,14 @@  qca639x: qca639x {
 
 };
 
+&LITTLE_CPU_SLEEP_0 {
+	status = "disabled";
+};
+
+&BIG_CPU_SLEEP_0 {
+	status = "disabled";
+};
+
 &adsp {
 	status = "okay";
 	firmware-name = "qcom/sm8250/adsp.mbn";