@@ -54,6 +54,7 @@ config PHY_QCOM_QMP
tristate "Qualcomm QMP PHY Driver"
depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
select GENERIC_PHY
+ select MFD_SYSCON
help
Enable this to support the QMP PHY transceiver that is used
with controllers such as PCIe, UFS, and USB on Qualcomm chips.
@@ -10,6 +10,7 @@
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
@@ -17,6 +18,7 @@
#include <linux/phy/pcie.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/slab.h>
@@ -886,6 +888,10 @@ static const struct qmp_phy_init_tbl sc8280xp_qmp_gen3x2_pcie_rc_serdes_tbl[] =
QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
};
+static const struct qmp_phy_init_tbl sc8280xp_qmp_gen3x4_pcie_serdes_4ln_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
+};
+
static const struct qmp_phy_init_tbl sc8280xp_qmp_gen3x1_pcie_tx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75),
@@ -1491,6 +1497,9 @@ struct qmp_phy_cfg {
const struct qmp_phy_cfg_tables *tables_rc;
const struct qmp_phy_cfg_tables *tables_ep;
+ const struct qmp_phy_init_tbl *serdes_4ln_tbl;
+ int serdes_4ln_num;
+
/* clock ids to be requested */
const char * const *clk_list;
int num_clks;
@@ -1518,6 +1527,7 @@ struct qmp_pcie {
struct device *dev;
const struct qmp_phy_cfg *cfg;
+ bool tcsr_4ln_config;
void __iomem *serdes;
void __iomem *pcs;
@@ -1527,6 +1537,8 @@ struct qmp_pcie {
void __iomem *tx2;
void __iomem *rx2;
+ void __iomem *port_b;
+
struct clk_bulk_data *clks;
struct clk_bulk_data pipe_clks[2];
int num_pipe_clks;
@@ -1932,6 +1944,44 @@ static const struct qmp_phy_cfg sc8280xp_qmp_gen3x2_pciephy_cfg = {
.phy_status = PHYSTATUS,
};
+static const struct qmp_phy_cfg sc8280xp_qmp_gen3x4_pciephy_cfg = {
+ .lanes = 4,
+
+ .offsets = &qmp_pcie_offsets_v5,
+
+ .tables = {
+ .serdes = sc8280xp_qmp_pcie_serdes_tbl,
+ .serdes_num = ARRAY_SIZE(sc8280xp_qmp_pcie_serdes_tbl),
+ .tx = sc8280xp_qmp_gen3x2_pcie_tx_tbl,
+ .tx_num = ARRAY_SIZE(sc8280xp_qmp_gen3x2_pcie_tx_tbl),
+ .rx = sc8280xp_qmp_gen3x2_pcie_rx_tbl,
+ .rx_num = ARRAY_SIZE(sc8280xp_qmp_gen3x2_pcie_rx_tbl),
+ .pcs = sc8280xp_qmp_gen3x2_pcie_pcs_tbl,
+ .pcs_num = ARRAY_SIZE(sc8280xp_qmp_gen3x2_pcie_pcs_tbl),
+ .pcs_misc = sc8280xp_qmp_gen3x2_pcie_pcs_misc_tbl,
+ .pcs_misc_num = ARRAY_SIZE(sc8280xp_qmp_gen3x2_pcie_pcs_misc_tbl),
+ },
+
+ .tables_rc = &(const struct qmp_phy_cfg_tables) {
+ .serdes = sc8280xp_qmp_gen3x2_pcie_rc_serdes_tbl,
+ .serdes_num = ARRAY_SIZE(sc8280xp_qmp_gen3x2_pcie_rc_serdes_tbl),
+ },
+
+ .serdes_4ln_tbl = sc8280xp_qmp_gen3x4_pcie_serdes_4ln_tbl,
+ .serdes_4ln_num = ARRAY_SIZE(sc8280xp_qmp_gen3x4_pcie_serdes_4ln_tbl),
+
+ .clk_list = sc8280xp_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sc8280xp_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+};
+
static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
.lanes = 2,
@@ -2054,6 +2104,24 @@ static void qmp_pcie_configure(void __iomem *base,
qmp_pcie_configure_lane(base, tbl, num, 0xff);
}
+static void qmp_pcie_init_port_b(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tbls)
+{
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ const struct qmp_pcie_offsets *offs = cfg->offsets;
+ void __iomem *tx3, *rx3, *tx4, *rx4;
+
+ tx3 = qmp->port_b + offs->tx;
+ rx3 = qmp->port_b + offs->rx;
+ tx4 = qmp->port_b + offs->tx2;
+ rx4 = qmp->port_b + offs->rx2;
+
+ qmp_pcie_configure_lane(tx3, tbls->tx, tbls->tx_num, 1);
+ qmp_pcie_configure_lane(rx3, tbls->rx, tbls->rx_num, 1);
+
+ qmp_pcie_configure_lane(tx4, tbls->tx, tbls->tx_num, 2);
+ qmp_pcie_configure_lane(rx4, tbls->rx, tbls->rx_num, 2);
+}
+
static void qmp_pcie_init_registers(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tbls)
{
const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -2080,6 +2148,11 @@ static void qmp_pcie_init_registers(struct qmp_pcie *qmp, const struct qmp_phy_c
qmp_pcie_configure(pcs, tbls->pcs, tbls->pcs_num);
qmp_pcie_configure(pcs_misc, tbls->pcs_misc, tbls->pcs_misc_num);
+
+ if (cfg->lanes >= 4 && qmp->tcsr_4ln_config) {
+ qmp_pcie_configure(serdes, cfg->serdes_4ln_tbl, cfg->serdes_4ln_num);
+ qmp_pcie_init_port_b(qmp, tbls);
+ }
}
static int qmp_pcie_init(struct phy *phy)
@@ -2452,6 +2525,37 @@ static int qmp_pcie_parse_dt_legacy(struct qmp_pcie *qmp, struct device_node *np
return 0;
}
+static int qmp_pcie_get_4ln_config(struct qmp_pcie *qmp)
+{
+ struct regmap *tcsr;
+ unsigned int args[2];
+ int ret;
+
+ tcsr = syscon_regmap_lookup_by_phandle_args(qmp->dev->of_node,
+ "qcom,4ln-config-sel",
+ ARRAY_SIZE(args), args);
+ if (IS_ERR(tcsr)) {
+ ret = PTR_ERR(tcsr);
+ if (ret == -ENOENT)
+ return 0;
+
+ dev_err(qmp->dev, "failed to lookup syscon: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_test_bits(tcsr, args[0], BIT(args[1]));
+ if (ret < 0) {
+ dev_err(qmp->dev, "failed to read tcsr: %d\n", ret);
+ return ret;
+ }
+
+ qmp->tcsr_4ln_config = ret;
+
+ dev_dbg(qmp->dev, "4ln_config_sel = %d\n", qmp->tcsr_4ln_config);
+
+ return 0;
+}
+
static int qmp_pcie_parse_dt(struct qmp_pcie *qmp)
{
struct platform_device *pdev = to_platform_device(qmp->dev);
@@ -2464,6 +2568,10 @@ static int qmp_pcie_parse_dt(struct qmp_pcie *qmp)
if (!offs)
return -EINVAL;
+ ret = qmp_pcie_get_4ln_config(qmp);
+ if (ret)
+ return ret;
+
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
@@ -2479,6 +2587,12 @@ static int qmp_pcie_parse_dt(struct qmp_pcie *qmp)
qmp->rx2 = base + offs->rx2;
}
+ if (qmp->cfg->lanes >= 4 && qmp->tcsr_4ln_config) {
+ qmp->port_b = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(qmp->port_b))
+ return PTR_ERR(qmp->port_b);
+ }
+
qmp->num_pipe_clks = 2;
qmp->pipe_clks[0].id = "pipe";
qmp->pipe_clks[1].id = "pipediv2";
@@ -2582,6 +2696,9 @@ static const struct of_device_id qmp_pcie_of_match_table[] = {
}, {
.compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy",
.data = &sc8280xp_qmp_gen3x2_pciephy_cfg,
+ }, {
+ .compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy",
+ .data = &sc8280xp_qmp_gen3x4_pciephy_cfg,
}, {
.compatible = "qcom,sdm845-qhp-pcie-phy",
.data = &sdm845_qhp_pciephy_cfg,
The PCIe2 and PCIe3 controllers and PHYs on SC8280XP can be used in 4-lane mode or as separate controllers and PHYs in 2-lane mode (e.g. as PCIe2A and PCIe2B). Add support for fetching the 4-lane configuration from the TCSR and programming the lane registers of the second port when in 4-lane mode. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- drivers/phy/qualcomm/Kconfig | 1 + drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 117 +++++++++++++++++++++++ 2 files changed, 118 insertions(+)