| Message ID | 20221020064215.2341278-1-Raju.Rangoju@amd.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | amd-xgbe: Miscellaneous fixes | expand |
On 10/20/22 01:42, Raju Rangoju wrote: > (1) Fix the rrc for Yellow carp devices. CDR workaround path > is disabled for YC devices, receiver reset cycle is not > needed in such cases. > > (2) Add enumerations for mailbox command and sub-commands. > Instead of using hard-coded values, use enums. > > (3) Enable PLL_CTL for fixed PHY modes only. Driver does not > implement SW RRCM for Autoneg Off configuration, hence PLL > is needed for fixed PHY modes only. > > (4) Fix the SFP compliance codes check for DAC cables. Some of > the passive cables have non-zero data at offset 6 in > SFP EEPROM data. So, fix the sfp compliance codes check. > > (5) Add a quirk for Molex passive cables to extend the rate > ceiling to 0x78. > > Raju Rangoju (5): > amd-xgbe: Yellow carp devices do not need rrc > amd-xgbe: use enums for mailbox cmd and sub_cmds > amd-xgbe: enable PLL_CTL for fixed PHY modes only > amd-xgbe: fix the SFP compliance codes check for DAC cables > amd-xgbe: add the bit rate quirk for Molex cables For the series, Acked-by: Tom Lendacky <thomas.lendacky@amd.com> > > drivers/net/ethernet/amd/xgbe/xgbe-pci.c | 5 ++ > drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 58 +++++++++++++-------- > drivers/net/ethernet/amd/xgbe/xgbe.h | 26 +++++++++ > 3 files changed, 68 insertions(+), 21 deletions(-) >
Hello: This series was applied to netdev/net.git (master) by Jakub Kicinski <kuba@kernel.org>: On Thu, 20 Oct 2022 12:12:10 +0530 you wrote: > (1) Fix the rrc for Yellow carp devices. CDR workaround path > is disabled for YC devices, receiver reset cycle is not > needed in such cases. > > (2) Add enumerations for mailbox command and sub-commands. > Instead of using hard-coded values, use enums. > > [...] Here is the summary with links: - [v3,net,1/5] amd-xgbe: Yellow carp devices do not need rrc https://git.kernel.org/netdev/net/c/f97fc7ef4146 - [v3,net,2/5] amd-xgbe: use enums for mailbox cmd and sub_cmds https://git.kernel.org/netdev/net/c/1246d0862349 - [v3,net,3/5] amd-xgbe: enable PLL_CTL for fixed PHY modes only https://git.kernel.org/netdev/net/c/fc75c032aee6 - [v3,net,4/5] amd-xgbe: fix the SFP compliance codes check for DAC cables https://git.kernel.org/netdev/net/c/09c5f6bf11ac - [v3,net,5/5] amd-xgbe: add the bit rate quirk for Molex cables https://git.kernel.org/netdev/net/c/170a9e341a3b You are awesome, thank you!
(1) Fix the rrc for Yellow carp devices. CDR workaround path is disabled for YC devices, receiver reset cycle is not needed in such cases. (2) Add enumerations for mailbox command and sub-commands. Instead of using hard-coded values, use enums. (3) Enable PLL_CTL for fixed PHY modes only. Driver does not implement SW RRCM for Autoneg Off configuration, hence PLL is needed for fixed PHY modes only. (4) Fix the SFP compliance codes check for DAC cables. Some of the passive cables have non-zero data at offset 6 in SFP EEPROM data. So, fix the sfp compliance codes check. (5) Add a quirk for Molex passive cables to extend the rate ceiling to 0x78. Raju Rangoju (5): amd-xgbe: Yellow carp devices do not need rrc amd-xgbe: use enums for mailbox cmd and sub_cmds amd-xgbe: enable PLL_CTL for fixed PHY modes only amd-xgbe: fix the SFP compliance codes check for DAC cables amd-xgbe: add the bit rate quirk for Molex cables drivers/net/ethernet/amd/xgbe/xgbe-pci.c | 5 ++ drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 58 +++++++++++++-------- drivers/net/ethernet/amd/xgbe/xgbe.h | 26 +++++++++ 3 files changed, 68 insertions(+), 21 deletions(-)