Message ID | 1341403833-25437-1-git-send-email-attila@kinali.ch (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Attila, On Wed, Jul 4, 2012 at 9:10 AM, Attila Kinali <attila@kinali.ch> wrote: > --- > arch/arm/boot/dts/imx23.dtsi | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) Your Signed-off-by line appears in the Subject. Please fix it and resend. Regards, Fabio Estevam
Suggested subject prefix "ARM: dts: imx23: ..." On Wed, Jul 04, 2012 at 02:10:33PM +0200, Attila Kinali wrote: > --- > arch/arm/boot/dts/imx23.dtsi | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi > index 8c5f999..df0ae8d 100644 > --- a/arch/arm/boot/dts/imx23.dtsi > +++ b/arch/arm/boot/dts/imx23.dtsi > @@ -134,6 +134,21 @@ > fsl,pinmux-ids = <0x2010 0x2060>; > fsl,pull-up = <0>; > }; > + > + mmc1_8bit_pins_a: mmc1-8bit@0 { > + reg = <0>; > + fsl,pinmux-ids = <0x0002 0x0012 0x0022 > + 0x0032 0x0042 0x0052 0x0062 > + 0x0072 0x0142 0x0132 0x0182>; Please take a look at the following branch to see how these should be formated now. http://git.linaro.org/gitweb?p=people/shawnguo/linux-2.6.git;a=shortlog;h=refs/heads/mxs/dt-for-3.6 > + fsl,drive-strength = <1>; > + fsl,voltage = <1>; > + fsl,pull-up = <1>; > + }; > + > + mmc1_pins_fixup: mmc1-pins-fixup { > + fsl,pinmux-ids = <0x0132 0x0182>; > + fsl,pull-up = <0>; > + }; I do not want to have these pinctrl setup added along. Please submit the changes together with the <board>.dts which uses them. Regards, Shawn > }; > > digctl@8001c000 { > -- > 1.7.10 >
On Wed, 4 Jul 2012 21:53:38 +0800 Shawn Guo <shawn.guo@linaro.org> wrote: > Suggested subject prefix "ARM: dts: imx23: ..." Ok > > + fsl,pinmux-ids = <0x0002 0x0012 0x0022 > > + 0x0032 0x0042 0x0052 0x0062 > > + 0x0072 0x0142 0x0132 0x0182>; > > Please take a look at the following branch to see how these should be > formated now. > > http://git.linaro.org/gitweb?p=people/shawnguo/linux-2.6.git;a=shortlog;h=refs/heads/mxs/dt-for-3.6 Ok > > + mmc1_pins_fixup: mmc1-pins-fixup { > > + fsl,pinmux-ids = <0x0132 0x0182>; > > + fsl,pull-up = <0>; > > + }; > > I do not want to have these pinctrl setup added along. Please submit > the changes together with the <board>.dts which uses them. I copied these from the mmc0 definition above. It could be these are spillovers from the imx23-evk definition. Shall i move teh mmc0_pins_fixup into the imx23-evk.dts file? Attila Kinali
On Wed, Jul 04, 2012 at 05:09:24PM +0200, Attila Kinali wrote: > > I do not want to have these pinctrl setup added along. Please submit Sorry. s/along/alone > > the changes together with the <board>.dts which uses them. > > I copied these from the mmc0 definition above. It could be these are > spillovers from the imx23-evk definition. Shall i move teh mmc0_pins_fixup > into the imx23-evk.dts file? > The changes in the patch look good. What I meant is we need have the user of mmc1_8bit_pins_a and mmc1_pins_fixup added together. The "user" means a <board>.dts which refers to these pins.
On Wed, 4 Jul 2012 23:26:06 +0800 Shawn Guo <shawn.guo@linaro.org> wrote: > On Wed, Jul 04, 2012 at 05:09:24PM +0200, Attila Kinali wrote: > > > the changes together with the <board>.dts which uses them. > > > > I copied these from the mmc0 definition above. It could be these are > > spillovers from the imx23-evk definition. Shall i move teh mmc0_pins_fixup > > into the imx23-evk.dts file? > > > The changes in the patch look good. What I meant is we need have the > user of mmc1_8bit_pins_a and mmc1_pins_fixup added together. The > "user" means a <board>.dts which refers to these pins. Ah.. ok.. Then it will have to wait until i have the system completely up and running. I'm still in the bring up phase and there will be still changes in the <board>.dts (not to mention that i didn't know about dts until yesterday and am likely to have bugs in the whole thing) Attila Kinali
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 8c5f999..df0ae8d 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -134,6 +134,21 @@ fsl,pinmux-ids = <0x2010 0x2060>; fsl,pull-up = <0>; }; + + mmc1_8bit_pins_a: mmc1-8bit@0 { + reg = <0>; + fsl,pinmux-ids = <0x0002 0x0012 0x0022 + 0x0032 0x0042 0x0052 0x0062 + 0x0072 0x0142 0x0132 0x0182>; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc1_pins_fixup: mmc1-pins-fixup { + fsl,pinmux-ids = <0x0132 0x0182>; + fsl,pull-up = <0>; + }; }; digctl@8001c000 {