@@ -1822,19 +1822,17 @@ config FB_SH_MOBILE_LCDC
config FB_S3C
tristate "Samsung S3C framebuffer support"
depends on FB && HAVE_CLK && HAS_IOMEM
- depends on (CPU_S3C2416 || ARCH_S3C64XX) || COMPILE_TEST
+ depends on ARCH_S3C64XX || COMPILE_TEST
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
Frame buffer driver for the built-in FB controller in the Samsung
- SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
- and the S3C64XX series such as the S3C6400 and S3C6410.
+ SoC line such as the S3C6400 and S3C6410.
These chips all have the same basic framebuffer design with the
- actual capabilities depending on the chip. For instance the S3C6400
- and S3C6410 support 4 hardware windows whereas the S3C24XX series
- currently only have two.
+ actual capabilities depending on the chip. The S3C6400
+ and S3C6410 support 4 hardware windows.
Currently the support is only for the S3C6400 and S3C6410 SoCs.
@@ -1844,29 +1842,6 @@ config FB_S3C_DEBUG_REGWRITE
help
Show all register writes via pr_debug()
-config FB_S3C2410
- tristate "S3C2410 LCD framebuffer support"
- depends on FB && ARCH_S3C24XX
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Frame buffer driver for the built-in LCD controller in the Samsung
- S3C2410 processor.
-
- This driver is also available as a module ( = code which can be
- inserted and removed from the running kernel whenever you want). The
- module will be called s3c2410fb. If you want to compile it as a module,
- say M here and read <file:Documentation/kbuild/modules.rst>.
-
- If unsure, say N.
-config FB_S3C2410_DEBUG
- bool "S3C2410 lcd debug messages"
- depends on FB_S3C2410
- help
- Turn on debugging messages. Note that you can set/unset at run time
- through sysfs
-
config FB_SM501
tristate "Silicon Motion SM501 framebuffer support"
depends on FB && MFD_SM501
@@ -98,7 +98,6 @@ obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C) += s3c-fb.o
-obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644