| Message ID | 20221024105229.v3.2.I29f6a2189e84e35ad89c1833793dca9e36c64297@changeid (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | mmc: sdhci controllers: Fix SDHCI_RESET_ALL for CQHCI | expand |
On 24/10/22 20:54, Brian Norris wrote: > SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't > tracking that properly in software. When out of sync, we may trigger > various timeouts. > > It's not typical to perform resets while CQE is enabled, but one > particular case I hit commonly enough: mmc_suspend() -> mmc_power_off(). > Typically we will eventually deactivate CQE (cqhci_suspend() -> > cqhci_deactivate()), but that's not guaranteed -- in particular, if > we perform a partial (e.g., interrupted) system suspend. > > The same bug was already found and fixed for two other drivers, in v5.7 > and v5.9: > > 5cf583f1fb9c mmc: sdhci-msm: Deactivate CQE during SDHC reset As checkpatch.pl says: ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 5cf583f1fb9c ("mmc: sdhci-msm: Deactivate CQE during SDHC reset")' > df57d73276b8 mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers And again > > The latter is especially prescient, saying "other drivers using CQHCI > might benefit from a similar change, if they also have CQHCI reset by > SDHCI_RESET_ALL." > > So like these other patches, deactivate CQHCI when resetting the > controller. Do this via the new sdhci_and_cqhci_reset() helper. For stable, this patch is dependent on "mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI". Best point that out here in this commit message as well. > > Fixes: 84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1") > Cc: <stable@vger.kernel.org> > Signed-off-by: Brian Norris <briannorris@chromium.org> > Reviewed-by: Guenter Roeck <linux@roeck-us.net> Otherwise: Acked-by: Adrian Hunter <adrian.hunter@intel.com> > --- > > Changes in v3: > - Refactor to a "SDHCI and CQHCI" helper -- sdhci_and_cqhci_reset() > > Changes in v2: > - Rely on cqhci_deactivate() to safely handle (ignore) > not-yet-initialized CQE support > > drivers/mmc/host/sdhci-of-arasan.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c > index 3997cad1f793..cfb891430174 100644 > --- a/drivers/mmc/host/sdhci-of-arasan.c > +++ b/drivers/mmc/host/sdhci-of-arasan.c > @@ -25,6 +25,7 @@ > #include <linux/firmware/xlnx-zynqmp.h> > > #include "cqhci.h" > +#include "sdhci-cqhci.h" > #include "sdhci-pltfm.h" > > #define SDHCI_ARASAN_VENDOR_REGISTER 0x78 > @@ -366,7 +367,7 @@ static void sdhci_arasan_reset(struct sdhci_host *host, u8 mask) > struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); > > - sdhci_reset(host, mask); > + sdhci_and_cqhci_reset(host, mask); > > if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_FORCE_CDTEST) { > ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c index 3997cad1f793..cfb891430174 100644 --- a/drivers/mmc/host/sdhci-of-arasan.c +++ b/drivers/mmc/host/sdhci-of-arasan.c @@ -25,6 +25,7 @@ #include <linux/firmware/xlnx-zynqmp.h> #include "cqhci.h" +#include "sdhci-cqhci.h" #include "sdhci-pltfm.h" #define SDHCI_ARASAN_VENDOR_REGISTER 0x78 @@ -366,7 +367,7 @@ static void sdhci_arasan_reset(struct sdhci_host *host, u8 mask) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); - sdhci_reset(host, mask); + sdhci_and_cqhci_reset(host, mask); if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_FORCE_CDTEST) { ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't tracking that properly in software. When out of sync, we may trigger various timeouts. It's not typical to perform resets while CQE is enabled, but one particular case I hit commonly enough: mmc_suspend() -> mmc_power_off(). Typically we will eventually deactivate CQE (cqhci_suspend() -> cqhci_deactivate()), but that's not guaranteed -- in particular, if we perform a partial (e.g., interrupted) system suspend. The same bug was already found and fixed for two other drivers, in v5.7 and v5.9: 5cf583f1fb9c mmc: sdhci-msm: Deactivate CQE during SDHC reset df57d73276b8 mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers The latter is especially prescient, saying "other drivers using CQHCI might benefit from a similar change, if they also have CQHCI reset by SDHCI_RESET_ALL." So like these other patches, deactivate CQHCI when resetting the controller. Do this via the new sdhci_and_cqhci_reset() helper. Fixes: 84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> --- Changes in v3: - Refactor to a "SDHCI and CQHCI" helper -- sdhci_and_cqhci_reset() Changes in v2: - Rely on cqhci_deactivate() to safely handle (ignore) not-yet-initialized CQE support drivers/mmc/host/sdhci-of-arasan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)