| Message ID | 20221020160305.18711-1-afd@ti.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | TI J7x Disable Incomplete DT Nodes | expand |
On October 20, 2022 thus sayeth Andrew Davis: > Hello all, > > Same story as for AM64x[0] and AM62x[1], this time for J7x. > > This one was a little more involved that the last 2 rounds as some IP > (like UART) are pinned out using the default pinmux. Perhaps we should be > explicit here and have pinmux nodes that simply restate the defaults. I > can go solve that in a follow up series if we think that is what we > want to do. > > I have the last round for AM65x ready to post, but that involves a few > boards that I do not have (Simatic IOT2050) but would like to do some > additional re-work with, so holding off until after I get that sorted. > > Thanks, > Andrew > > [0] https://www.spinics.net/lists/arm-kernel/msg1018532.html > [1] https://www.spinics.net/lists/arm-kernel/msg1018864.html > > Andrew Davis (12): > arm64: dts: ti: k3-j721e: Enable UART nodes at the board level > arm64: dts: ti: k3-j721e: Enable I2C nodes at the board level > arm64: dts: ti: k3-j721e: Enable MCASP nodes at the board level > arm64: dts: ti: k3-j721e: Enable MCAN nodes at the board level > arm64: dts: ti: k3-j7200: Enable UART nodes at the board level > arm64: dts: ti: k3-j7200: Enable I2C nodes at the board level > arm64: dts: ti: k3-j721s2: Enable UART nodes at the board level > arm64: dts: ti: k3-j721e: Enable Mailbox nodes at the board level > arm64: dts: ti: k3-j7200: Enable Mailbox nodes at the board level > arm64: dts: ti: k3-j721s2: Enable Mailbox nodes at the board level > arm64: dts: ti: k3-j721s2: Enable MCAN nodes at the board level > arm64: dts: ti: k3-j721s2: Enable I2C nodes at the board level > > .../dts/ti/k3-j7200-common-proc-board.dts | 48 ++---- > arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 29 ++++ > .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 5 + > arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 42 +---- > .../dts/ti/k3-j721e-common-proc-board.dts | 141 +++------------- > arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 55 ++++++ > .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 7 + > arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 158 ++---------------- > arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 33 +--- > .../dts/ti/k3-j721s2-common-proc-board.dts | 132 +-------------- > arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 58 +++++++ > .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 7 + > arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 98 +---------- > 13 files changed, 231 insertions(+), 582 deletions(-) > *whew* these Jacinto boards have a lot of stuff on them :) but it LGTM Reviewed-by: Bryan Brattlof <bb@ti.com> ~Bryan
On 20/10/22 9:32 pm, Andrew Davis wrote: > Andrew Davis (12): > arm64: dts: ti: k3-j721e: Enable UART nodes at the board level > arm64: dts: ti: k3-j721e: Enable I2C nodes at the board level > arm64: dts: ti: k3-j721e: Enable MCASP nodes at the board level > arm64: dts: ti: k3-j721e: Enable MCAN nodes at the board level > arm64: dts: ti: k3-j7200: Enable UART nodes at the board level > arm64: dts: ti: k3-j7200: Enable I2C nodes at the board level > arm64: dts: ti: k3-j721s2: Enable UART nodes at the board level > arm64: dts: ti: k3-j721e: Enable Mailbox nodes at the board level > arm64: dts: ti: k3-j7200: Enable Mailbox nodes at the board level > arm64: dts: ti: k3-j721s2: Enable Mailbox nodes at the board level > arm64: dts: ti: k3-j721s2: Enable MCAN nodes at the board level > arm64: dts: ti: k3-j721s2: Enable I2C nodes at the board level > > .../dts/ti/k3-j7200-common-proc-board.dts | 48 ++---- > arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 29 ++++ > .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 5 + > arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 42 +---- > .../dts/ti/k3-j721e-common-proc-board.dts | 141 +++------------- > arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 55 ++++++ > .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 7 + > arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 158 ++---------------- > arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 33 +--- > .../dts/ti/k3-j721s2-common-proc-board.dts | 132 +-------------- > arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 58 +++++++ > .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 7 + > arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 98 +---------- > 13 files changed, 231 insertions(+), 582 deletions(-) Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Hi Andrew Davis, On Thu, 20 Oct 2022 11:02:53 -0500, Andrew Davis wrote: > Same story as for AM64x[0] and AM62x[1], this time for J7x. > > This one was a little more involved that the last 2 rounds as some IP > (like UART) are pinned out using the default pinmux. Perhaps we should be > explicit here and have pinmux nodes that simply restate the defaults. I > can go solve that in a follow up series if we think that is what we > want to do. > > [...] I have applied the following to branch ti-k3-dts-next on [1]. Thank you! [01/12] arm64: dts: ti: k3-j721e: Enable UART nodes at the board level commit: fe17e20fde14c6cbaf1cae97aef370b6f4c73518 [02/12] arm64: dts: ti: k3-j721e: Enable I2C nodes at the board level commit: 282c4ad3b8c1da99095e0edbbe617cdf4dcb138b [03/12] arm64: dts: ti: k3-j721e: Enable MCASP nodes at the board level commit: 256596ad158c80c8e4104a6310a411ec8829f9eb [04/12] arm64: dts: ti: k3-j721e: Enable MCAN nodes at the board level commit: 39e7758b94e31071a87489364c723afe92849ae7 [05/12] arm64: dts: ti: k3-j7200: Enable UART nodes at the board level commit: dae322f8a7ef11a06bfb61bada4ebbcac219783e [06/12] arm64: dts: ti: k3-j7200: Enable I2C nodes at the board level commit: a9ed915cd55c883fed72e50b45988fa4305496a7 [07/12] arm64: dts: ti: k3-j721s2: Enable UART nodes at the board level commit: 0e63f35a9c6acf1d74bd693c492f8955bb16c89a [08/12] arm64: dts: ti: k3-j721e: Enable Mailbox nodes at the board level commit: 7e48b665100ee84bdaa163dece6d40351077f664 [09/12] arm64: dts: ti: k3-j7200: Enable Mailbox nodes at the board level commit: 74f0f58d3122c3e2cc313dd6311b9742dbfd54e0 [10/12] arm64: dts: ti: k3-j721s2: Enable Mailbox nodes at the board level commit: 3fb0402f65959edc9a14842dc36828d2c7109ae2 [11/12] arm64: dts: ti: k3-j721s2: Enable MCAN nodes at the board level commit: 06639b8ae0e9be0cf0195209e6b69f4e254687b0 [12/12] arm64: dts: ti: k3-j721s2: Enable I2C nodes at the board level commit: 0aef5131380628e2a9bfcbbcfed5d6477c8f9651 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. [1] git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git