| Message ID | 20221028061922.19045-2-zhuyinbo@loongson.cn (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | [v6,1/3] dt-bindings: clock: add loongson-2 clock include file | expand |
On 28/10/2022 02:19, Yinbo Zhu wrote: > This driver provides support for clock controller on Loongson-2 SoC > , the Loongson-2 SoC uses a 100MHz clock as the PLL reference clock > , there are five independent PLLs inside, each of which PLL can Same problem as in other patch - no new lines before commas. > provide up to three sets of frequency dependent clock outputs. > > Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> > --- > MAINTAINERS | 1 + > arch/loongarch/Kconfig | 1 + > arch/loongarch/kernel/time.c | 3 + > drivers/clk/Kconfig | 9 ++ > drivers/clk/Makefile | 1 + > drivers/clk/clk-loongson2.c | 285 +++++++++++++++++++++++++++++++++++ > 6 files changed, 300 insertions(+) > create mode 100644 drivers/clk/clk-loongson2.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 14af7ebf2be1..5136684fb6c6 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -11911,6 +11911,7 @@ LOONGSON-2 SOC SERIES CLOCK DRIVER > M: Yinbo Zhu <zhuyinbo@loongson.cn> > L: linux-clk@vger.kernel.org > S: Maintained > +F: drivers/clk/clk-loongson2.c > F: include/dt-bindings/clock/loongson,ls2k-clk.h > > LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) > diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig > index 26aeb1408e56..8b65f349cd6e 100644 > --- a/arch/loongarch/Kconfig > +++ b/arch/loongarch/Kconfig > @@ -122,6 +122,7 @@ config LOONGARCH > select USE_PERCPU_NUMA_NODE_ID > select USER_STACKTRACE_SUPPORT > select ZONE_DMA32 > + select COMMON_CLK > > config 32BIT > bool > diff --git a/arch/loongarch/kernel/time.c b/arch/loongarch/kernel/time.c > index 786735dcc8d6..09f20bc81798 100644 > --- a/arch/loongarch/kernel/time.c > +++ b/arch/loongarch/kernel/time.c > @@ -12,6 +12,7 @@ > #include <linux/kernel.h> > #include <linux/sched_clock.h> > #include <linux/spinlock.h> > +#include <linux/of_clk.h> > > #include <asm/cpu-features.h> > #include <asm/loongarch.h> > @@ -214,6 +215,8 @@ int __init constant_clocksource_init(void) > > void __init time_init(void) > { > + of_clk_init(NULL); > + > if (!cpu_has_cpucfg) > const_clock_freq = cpu_clock_freq; > else > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig > index 48f8f4221e21..e85a3ed88d4c 100644 > --- a/drivers/clk/Kconfig > +++ b/drivers/clk/Kconfig > @@ -428,6 +428,15 @@ config COMMON_CLK_K210 > help > Support for the Canaan Kendryte K210 RISC-V SoC clocks. > > +config COMMON_CLK_LOONGSON2 Messed up order. > + bool "Clock driver for Loongson-2 SoC" > + depends on COMMON_CLK && OF > + help > + This driver provides support for Clock Controller that base on > + Common Clock Framework Controller (CCF) on Loongson-2 SoC. The > + Clock Controller can generates and supplies clock to various > + peripherals within the SoC. > + > source "drivers/clk/actions/Kconfig" > source "drivers/clk/analogbits/Kconfig" > source "drivers/clk/baikal-t1/Kconfig" > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile > index d5db170d38d2..8ccc7436052f 100644 > --- a/drivers/clk/Makefile > +++ b/drivers/clk/Makefile > @@ -75,6 +75,7 @@ obj-$(CONFIG_COMMON_CLK_RS9_PCIE) += clk-renesas-pcie.o > obj-$(CONFIG_COMMON_CLK_VC5) += clk-versaclock5.o > obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o > obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o > +obj-$(CONFIG_COMMON_CLK_LOONGSON2) += clk-loongson2.o Messed up order. > > # please keep this section sorted lexicographically by directory path name > obj-y += actions/ > diff --git a/drivers/clk/clk-loongson2.c b/drivers/clk/clk-loongson2.c > new file mode 100644 > index 000000000000..359fede40112 > --- /dev/null > +++ b/drivers/clk/clk-loongson2.c > @@ -0,0 +1,285 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Author: Yinbo Zhu <zhuyinbo@loongson.cn> > + * Copyright (C) 2022-2023 Loongson Technology Corporation Limited > + */ > + > +#include <linux/clkdev.h> > +#include <linux/err.h> > +#include <linux/init.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <dt-bindings/clock/loongson,ls2k-clk.h> > +#include <linux/clk-provider.h> > +#include <linux/slab.h> > +#include <linux/clk.h> > + > +#define LOONGSON2_PLL_MULT_SHIFT 32 > +#define LOONGSON2_PLL_MULT_WIDTH 10 > +#define LOONGSON2_PLL_DIV_SHIFT 26 > +#define LOONGSON2_PLL_DIV_WIDTH 6 > +#define LOONGSON2_APB_FREQSCALE_SHIFT 20 > +#define LOONGSON2_APB_FREQSCALE_WIDTH 3 > +#define LOONGSON2_USB_FREQSCALE_SHIFT 16 > +#define LOONGSON2_USB_FREQSCALE_WIDTH 3 > +#define LOONGSON2_SATA_FREQSCALE_SHIFT 12 > +#define LOONGSON2_SATA_FREQSCALE_WIDTH 3 > + > +void __iomem *loongson2_pll_base; This must be static. > +static DEFINE_SPINLOCK(loongson2_clk_lock); > +static struct clk_hw **hws; > +static struct clk_hw_onecell_data *clk_hw_data; You have way too many file-scope variables. I would expect 0 and this being a driver. Best regards, Krzysztof
在 2022/10/28 下午7:42, Krzysztof Kozlowski 写道: > On 28/10/2022 02:19, Yinbo Zhu wrote: >> This driver provides support for clock controller on Loongson-2 SoC >> , the Loongson-2 SoC uses a 100MHz clock as the PLL reference clock >> , there are five independent PLLs inside, each of which PLL can > > Same problem as in other patch - no new lines before commas. > >> provide up to three sets of frequency dependent clock outputs. >> >> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> >> --- >> MAINTAINERS | 1 + >> arch/loongarch/Kconfig | 1 + >> arch/loongarch/kernel/time.c | 3 + >> drivers/clk/Kconfig | 9 ++ >> drivers/clk/Makefile | 1 + >> drivers/clk/clk-loongson2.c | 285 +++++++++++++++++++++++++++++++++++ >> 6 files changed, 300 insertions(+) >> create mode 100644 drivers/clk/clk-loongson2.c >> >> diff --git a/MAINTAINERS b/MAINTAINERS >> index 14af7ebf2be1..5136684fb6c6 100644 >> --- a/MAINTAINERS >> +++ b/MAINTAINERS >> @@ -11911,6 +11911,7 @@ LOONGSON-2 SOC SERIES CLOCK DRIVER >> M: Yinbo Zhu <zhuyinbo@loongson.cn> >> L: linux-clk@vger.kernel.org >> S: Maintained >> +F: drivers/clk/clk-loongson2.c >> F: include/dt-bindings/clock/loongson,ls2k-clk.h >> >> LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) >> diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig >> index 26aeb1408e56..8b65f349cd6e 100644 >> --- a/arch/loongarch/Kconfig >> +++ b/arch/loongarch/Kconfig >> @@ -122,6 +122,7 @@ config LOONGARCH >> select USE_PERCPU_NUMA_NODE_ID >> select USER_STACKTRACE_SUPPORT >> select ZONE_DMA32 >> + select COMMON_CLK >> >> config 32BIT >> bool >> diff --git a/arch/loongarch/kernel/time.c b/arch/loongarch/kernel/time.c >> index 786735dcc8d6..09f20bc81798 100644 >> --- a/arch/loongarch/kernel/time.c >> +++ b/arch/loongarch/kernel/time.c >> @@ -12,6 +12,7 @@ >> #include <linux/kernel.h> >> #include <linux/sched_clock.h> >> #include <linux/spinlock.h> >> +#include <linux/of_clk.h> >> >> #include <asm/cpu-features.h> >> #include <asm/loongarch.h> >> @@ -214,6 +215,8 @@ int __init constant_clocksource_init(void) >> >> void __init time_init(void) >> { >> + of_clk_init(NULL); >> + >> if (!cpu_has_cpucfg) >> const_clock_freq = cpu_clock_freq; >> else >> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig >> index 48f8f4221e21..e85a3ed88d4c 100644 >> --- a/drivers/clk/Kconfig >> +++ b/drivers/clk/Kconfig >> @@ -428,6 +428,15 @@ config COMMON_CLK_K210 >> help >> Support for the Canaan Kendryte K210 RISC-V SoC clocks. >> >> +config COMMON_CLK_LOONGSON2 > > Messed up order. okay, I got it. > >> + bool "Clock driver for Loongson-2 SoC" >> + depends on COMMON_CLK && OF >> + help >> + This driver provides support for Clock Controller that base on >> + Common Clock Framework Controller (CCF) on Loongson-2 SoC. The >> + Clock Controller can generates and supplies clock to various >> + peripherals within the SoC. >> + >> source "drivers/clk/actions/Kconfig" >> source "drivers/clk/analogbits/Kconfig" >> source "drivers/clk/baikal-t1/Kconfig" >> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile >> index d5db170d38d2..8ccc7436052f 100644 >> --- a/drivers/clk/Makefile >> +++ b/drivers/clk/Makefile >> @@ -75,6 +75,7 @@ obj-$(CONFIG_COMMON_CLK_RS9_PCIE) += clk-renesas-pcie.o >> obj-$(CONFIG_COMMON_CLK_VC5) += clk-versaclock5.o >> obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o >> obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o >> +obj-$(CONFIG_COMMON_CLK_LOONGSON2) += clk-loongson2.o > > Messed up order. > okay, I got it. >> >> # please keep this section sorted lexicographically by directory path name >> obj-y += actions/ >> diff --git a/drivers/clk/clk-loongson2.c b/drivers/clk/clk-loongson2.c >> new file mode 100644 >> index 000000000000..359fede40112 >> --- /dev/null >> +++ b/drivers/clk/clk-loongson2.c >> @@ -0,0 +1,285 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * Author: Yinbo Zhu <zhuyinbo@loongson.cn> >> + * Copyright (C) 2022-2023 Loongson Technology Corporation Limited >> + */ >> + >> +#include <linux/clkdev.h> >> +#include <linux/err.h> >> +#include <linux/init.h> >> +#include <linux/of.h> >> +#include <linux/of_address.h> >> +#include <dt-bindings/clock/loongson,ls2k-clk.h> >> +#include <linux/clk-provider.h> >> +#include <linux/slab.h> >> +#include <linux/clk.h> >> + >> +#define LOONGSON2_PLL_MULT_SHIFT 32 >> +#define LOONGSON2_PLL_MULT_WIDTH 10 >> +#define LOONGSON2_PLL_DIV_SHIFT 26 >> +#define LOONGSON2_PLL_DIV_WIDTH 6 >> +#define LOONGSON2_APB_FREQSCALE_SHIFT 20 >> +#define LOONGSON2_APB_FREQSCALE_WIDTH 3 >> +#define LOONGSON2_USB_FREQSCALE_SHIFT 16 >> +#define LOONGSON2_USB_FREQSCALE_WIDTH 3 >> +#define LOONGSON2_SATA_FREQSCALE_SHIFT 12 >> +#define LOONGSON2_SATA_FREQSCALE_WIDTH 3 >> + >> +void __iomem *loongson2_pll_base; > > This must be static. okay, I will add it. > >> +static DEFINE_SPINLOCK(loongson2_clk_lock); >> +static struct clk_hw **hws; >> +static struct clk_hw_onecell_data *clk_hw_data; > > You have way too many file-scope variables. I would expect 0 and this > being a driver. okay, I will move it in probe. > > Best regards, > Krzysztof >
diff --git a/MAINTAINERS b/MAINTAINERS index 14af7ebf2be1..5136684fb6c6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11911,6 +11911,7 @@ LOONGSON-2 SOC SERIES CLOCK DRIVER M: Yinbo Zhu <zhuyinbo@loongson.cn> L: linux-clk@vger.kernel.org S: Maintained +F: drivers/clk/clk-loongson2.c F: include/dt-bindings/clock/loongson,ls2k-clk.h LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig index 26aeb1408e56..8b65f349cd6e 100644 --- a/arch/loongarch/Kconfig +++ b/arch/loongarch/Kconfig @@ -122,6 +122,7 @@ config LOONGARCH select USE_PERCPU_NUMA_NODE_ID select USER_STACKTRACE_SUPPORT select ZONE_DMA32 + select COMMON_CLK config 32BIT bool diff --git a/arch/loongarch/kernel/time.c b/arch/loongarch/kernel/time.c index 786735dcc8d6..09f20bc81798 100644 --- a/arch/loongarch/kernel/time.c +++ b/arch/loongarch/kernel/time.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/sched_clock.h> #include <linux/spinlock.h> +#include <linux/of_clk.h> #include <asm/cpu-features.h> #include <asm/loongarch.h> @@ -214,6 +215,8 @@ int __init constant_clocksource_init(void) void __init time_init(void) { + of_clk_init(NULL); + if (!cpu_has_cpucfg) const_clock_freq = cpu_clock_freq; else diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 48f8f4221e21..e85a3ed88d4c 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -428,6 +428,15 @@ config COMMON_CLK_K210 help Support for the Canaan Kendryte K210 RISC-V SoC clocks. +config COMMON_CLK_LOONGSON2 + bool "Clock driver for Loongson-2 SoC" + depends on COMMON_CLK && OF + help + This driver provides support for Clock Controller that base on + Common Clock Framework Controller (CCF) on Loongson-2 SoC. The + Clock Controller can generates and supplies clock to various + peripherals within the SoC. + source "drivers/clk/actions/Kconfig" source "drivers/clk/analogbits/Kconfig" source "drivers/clk/baikal-t1/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index d5db170d38d2..8ccc7436052f 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -75,6 +75,7 @@ obj-$(CONFIG_COMMON_CLK_RS9_PCIE) += clk-renesas-pcie.o obj-$(CONFIG_COMMON_CLK_VC5) += clk-versaclock5.o obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o +obj-$(CONFIG_COMMON_CLK_LOONGSON2) += clk-loongson2.o # please keep this section sorted lexicographically by directory path name obj-y += actions/ diff --git a/drivers/clk/clk-loongson2.c b/drivers/clk/clk-loongson2.c new file mode 100644 index 000000000000..359fede40112 --- /dev/null +++ b/drivers/clk/clk-loongson2.c @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Author: Yinbo Zhu <zhuyinbo@loongson.cn> + * Copyright (C) 2022-2023 Loongson Technology Corporation Limited + */ + +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <dt-bindings/clock/loongson,ls2k-clk.h> +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/clk.h> + +#define LOONGSON2_PLL_MULT_SHIFT 32 +#define LOONGSON2_PLL_MULT_WIDTH 10 +#define LOONGSON2_PLL_DIV_SHIFT 26 +#define LOONGSON2_PLL_DIV_WIDTH 6 +#define LOONGSON2_APB_FREQSCALE_SHIFT 20 +#define LOONGSON2_APB_FREQSCALE_WIDTH 3 +#define LOONGSON2_USB_FREQSCALE_SHIFT 16 +#define LOONGSON2_USB_FREQSCALE_WIDTH 3 +#define LOONGSON2_SATA_FREQSCALE_SHIFT 12 +#define LOONGSON2_SATA_FREQSCALE_WIDTH 3 + +void __iomem *loongson2_pll_base; +static DEFINE_SPINLOCK(loongson2_clk_lock); +static struct clk_hw **hws; +static struct clk_hw_onecell_data *clk_hw_data; + +static struct clk_hw *loongson2_clk_register(struct device *dev, + const char *name, + const char *parent_name, + const struct clk_ops *ops, + unsigned long flags) +{ + int ret; + struct clk_hw *hw; + struct clk_init_data init; + + /* allocate the divider */ + hw = kzalloc(sizeof(*hw), GFP_KERNEL); + if (!hw) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = ops; + init.flags = flags | CLK_IS_BASIC; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + hw->init = &init; + + /* register the clock */ + ret = clk_hw_register(dev, hw); + if (ret) { + kfree(hw); + hw = ERR_PTR(ret); + } + + return hw; +} + +static struct clk_hw *loongson2_clk_pll_register(const char *name, + const char *parent, void __iomem *reg) +{ + u64 val; + u32 mult = 1, div = 1; + + val = readq((void *)reg); + + mult = (val >> LOONGSON2_PLL_MULT_SHIFT) & + clk_div_mask(LOONGSON2_PLL_MULT_WIDTH); + div = (val >> LOONGSON2_PLL_DIV_SHIFT) & + clk_div_mask(LOONGSON2_PLL_DIV_WIDTH); + + return clk_hw_register_fixed_factor(NULL, name, parent, + CLK_SET_RATE_PARENT, mult, div); +} + +static unsigned long loongson2_apb_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + u64 val; + u32 mult; + unsigned long rate; + + val = readq((void *)(loongson2_pll_base + 0x50)); + + mult = (val >> LOONGSON2_APB_FREQSCALE_SHIFT) & + clk_div_mask(LOONGSON2_APB_FREQSCALE_WIDTH); + + rate = parent_rate * (mult + 1); + do_div(rate, 8); + + return rate; +} + +static const struct clk_ops loongson2_apb_clk_ops = { + .recalc_rate = loongson2_apb_recalc_rate, +}; + +static unsigned long loongson2_usb_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + u64 val; + u32 mult; + unsigned long rate; + + val = readq((void *)(loongson2_pll_base + 0x50)); + + mult = (val >> LOONGSON2_USB_FREQSCALE_SHIFT) & + clk_div_mask(LOONGSON2_USB_FREQSCALE_WIDTH); + + rate = parent_rate * (mult + 1); + do_div(rate, 8); + + return rate; +} + +static const struct clk_ops loongson2_usb_clk_ops = { + .recalc_rate = loongson2_usb_recalc_rate, +}; + +static unsigned long loongson2_sata_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + u64 val; + u32 mult; + unsigned long rate; + + val = readq((void *)(loongson2_pll_base + 0x50)); + + mult = (val >> LOONGSON2_SATA_FREQSCALE_SHIFT) & + clk_div_mask(LOONGSON2_SATA_FREQSCALE_WIDTH); + + rate = parent_rate * (mult + 1); + do_div(rate, 8); + + return rate; +} + +static const struct clk_ops loongson2_sata_clk_ops = { + .recalc_rate = loongson2_sata_recalc_rate, +}; + +static void loongson2_check_clk_hws(struct clk_hw *clks[], unsigned int count) +{ + unsigned int i; + + for (i = 0; i < count; i++) + if (IS_ERR(clks[i])) + pr_err("Loongson2 clk %u: register failed with %ld\n" + , i, PTR_ERR(clks[i])); +} + +static struct clk_hw *loongson2_obtain_fixed_clk_hw( + struct device_node *np, + const char *name) +{ + struct clk *clk; + + clk = of_clk_get_by_name(np, name); + if (IS_ERR(clk)) + return ERR_PTR(-ENOENT); + + return __clk_get_hw(clk); +} + +static void __init loongson2_clocks_init(struct device_node *np) +{ + loongson2_pll_base = of_iomap(np, 0); + + if (!loongson2_pll_base) { + pr_err("clk: unable to map loongson2 clk registers\n"); + goto err; + } + + clk_hw_data = kzalloc(struct_size(clk_hw_data, hws, LOONGSON2_CLK_END), + GFP_KERNEL); + if (WARN_ON(!clk_hw_data)) + goto err; + + clk_hw_data->num = LOONGSON2_CLK_END; + hws = clk_hw_data->hws; + + hws[LOONGSON2_REF_100M] = loongson2_obtain_fixed_clk_hw(np, + "ref_100m"); + + hws[LOONGSON2_NODE_PLL] = loongson2_clk_pll_register("node_pll", + "ref_100m", + loongson2_pll_base); + + hws[LOONGSON2_DDR_PLL] = loongson2_clk_pll_register("ddr_pll", + "ref_100m", + loongson2_pll_base + 0x10); + + hws[LOONGSON2_DC_PLL] = loongson2_clk_pll_register("dc_pll", + "ref_100m", + loongson2_pll_base + 0x20); + + hws[LOONGSON2_PIX0_PLL] = loongson2_clk_pll_register("pix0_pll", + "ref_100m", + loongson2_pll_base + 0x30); + + hws[LOONGSON2_PIX1_PLL] = loongson2_clk_pll_register("pix1_pll", + "ref_100m", + loongson2_pll_base + 0x40); + + hws[LOONGSON2_NODE_CLK] = clk_hw_register_divider(NULL, "node", + "node_pll", 0, + loongson2_pll_base + 0x8, 0, + 6, CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + /* + * The hda clk divisor in the upper 32bits and the clk-prodiver + * layer code doesn't support 64bit io operation thus a conversion + * is required that subtract shift by 32 and add 4byte to the hda + * address + */ + hws[LOONGSON2_HDA_CLK] = clk_hw_register_divider(NULL, "hda", + "ddr_pll", 0, + loongson2_pll_base + 0x22, 12, + 7, CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + hws[LOONGSON2_GPU_CLK] = clk_hw_register_divider(NULL, "gpu", + "ddr_pll", 0, + loongson2_pll_base + 0x18, 22, + 6, CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + hws[LOONGSON2_DDR_CLK] = clk_hw_register_divider(NULL, "ddr", + "ddr_pll", 0, + loongson2_pll_base + 0x18, 0, + 6, CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + hws[LOONGSON2_GMAC_CLK] = clk_hw_register_divider(NULL, "gmac", + "dc_pll", 0, + loongson2_pll_base + 0x28, 22, + 6, CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + hws[LOONGSON2_DC_CLK] = clk_hw_register_divider(NULL, "dc", + "dc_pll", 0, + loongson2_pll_base + 0x28, 0, + 6, CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + hws[LOONGSON2_APB_CLK] = loongson2_clk_register(NULL, "apb", + "gmac", + &loongson2_apb_clk_ops, 0); + + hws[LOONGSON2_USB_CLK] = loongson2_clk_register(NULL, "usb", + "gmac", + &loongson2_usb_clk_ops, 0); + + hws[LOONGSON2_SATA_CLK] = loongson2_clk_register(NULL, "sata", + "gmac", + &loongson2_sata_clk_ops, 0); + + hws[LOONGSON2_PIX0_CLK] = clk_hw_register_divider(NULL, "pix0", + "pix0_pll", 0, + loongson2_pll_base + 0x38, 0, 6, + CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + hws[LOONGSON2_PIX1_CLK] = clk_hw_register_divider(NULL, "pix1", + "pix1_pll", 0, + loongson2_pll_base + 0x48, 0, 6, + CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + loongson2_check_clk_hws(hws, LOONGSON2_CLK_END); + + of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data); + +err: + iounmap(loongson2_pll_base); +} + +CLK_OF_DECLARE(loongson2_clk, "loongson,ls2k-clk", loongson2_clocks_init);
This driver provides support for clock controller on Loongson-2 SoC , the Loongson-2 SoC uses a 100MHz clock as the PLL reference clock , there are five independent PLLs inside, each of which PLL can provide up to three sets of frequency dependent clock outputs. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> --- MAINTAINERS | 1 + arch/loongarch/Kconfig | 1 + arch/loongarch/kernel/time.c | 3 + drivers/clk/Kconfig | 9 ++ drivers/clk/Makefile | 1 + drivers/clk/clk-loongson2.c | 285 +++++++++++++++++++++++++++++++++++ 6 files changed, 300 insertions(+) create mode 100644 drivers/clk/clk-loongson2.c