diff mbox series

[v2,11/16] media: i2c: ov9282: Add HFLIP and VFLIP support

Message ID 20221028160902.2696973-12-dave.stevenson@raspberrypi.com (mailing list archive)
State New, archived
Headers show
Series Updates to ov9282 sensor driver | expand

Commit Message

Dave Stevenson Oct. 28, 2022, 4:08 p.m. UTC 
Adds support for V4L2_CID_HFLIP and V4L2_CID_VFLIP to allow
flipping the image.

The driver previously enabled H & V flips in the register table,
therefore the controls default to the same settings to avoid
changing the behaviour.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/media/i2c/ov9282.c | 52 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 51 insertions(+), 1 deletion(-)

Comments

Jacopo Mondi Oct. 31, 2022, 10:41 a.m. UTC | #1 
On Fri, Oct 28, 2022 at 05:08:57PM +0100, Dave Stevenson wrote:
> Adds support for V4L2_CID_HFLIP and V4L2_CID_VFLIP to allow
> flipping the image.
>
> The driver previously enabled H & V flips in the register table,
> therefore the controls default to the same settings to avoid
> changing the behaviour.
>
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> ---
>  drivers/media/i2c/ov9282.c | 52 +++++++++++++++++++++++++++++++++++++-
>  1 file changed, 51 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
> index e964461ff1d3..cfb6e72d8931 100644
> --- a/drivers/media/i2c/ov9282.c
> +++ b/drivers/media/i2c/ov9282.c
> @@ -45,6 +45,10 @@
>  /* Group hold register */
>  #define OV9282_REG_HOLD		0x3308
>
> +#define OV9282_REG_TIMING_FORMAT_1	0x3820
> +#define OV9282_REG_TIMING_FORMAT_2	0x3821
> +#define OV9282_FLIP_BIT			BIT(2)
> +
>  #define OV9282_REG_MIPI_CTRL00	0x4800
>  #define OV9282_GATED_CLOCK	BIT(5)
>
> @@ -438,6 +442,40 @@ static int ov9282_update_exp_gain(struct ov9282 *ov9282, u32 exposure, u32 gain)
>  	return ret;
>  }
>
> +static int ov9282_set_ctrl_hflip(struct ov9282 *ov9282, int value)
> +{
> +	u32 current_val;
> +	int ret = ov9282_read_reg(ov9282, OV9282_REG_TIMING_FORMAT_2, 1,
> +				  &current_val);
> +	if (ret)
> +		return ret;
> +
> +	if (value)
> +		current_val |= OV9282_FLIP_BIT;
> +	else
> +		current_val &= ~OV9282_FLIP_BIT;
> +
> +	return ov9282_write_reg(ov9282, OV9282_REG_TIMING_FORMAT_2, 1,
> +				current_val);
> +}
> +
> +static int ov9282_set_ctrl_vflip(struct ov9282 *ov9282, int value)
> +{
> +	u32 current_val;
> +	int ret = ov9282_read_reg(ov9282, OV9282_REG_TIMING_FORMAT_1, 1,
> +				  &current_val);
> +	if (ret)
> +		return ret;
> +
> +	if (value)
> +		current_val |= OV9282_FLIP_BIT;
> +	else
> +		current_val &= ~OV9282_FLIP_BIT;
> +
> +	return ov9282_write_reg(ov9282, OV9282_REG_TIMING_FORMAT_1, 1,
> +				current_val);
> +}
> +
>  /**
>   * ov9282_set_ctrl() - Set subdevice control
>   * @ctrl: pointer to v4l2_ctrl structure
> @@ -494,6 +532,12 @@ static int ov9282_set_ctrl(struct v4l2_ctrl *ctrl)
>  		lpfr = ov9282->vblank + ov9282->cur_mode->height;
>  		ret = ov9282_write_reg(ov9282, OV9282_REG_LPFR, 2, lpfr);
>  		break;
> +	case V4L2_CID_HFLIP:
> +		ret = ov9282_set_ctrl_hflip(ov9282, ctrl->val);
> +		break;
> +	case V4L2_CID_VFLIP:
> +		ret = ov9282_set_ctrl_vflip(ov9282, ctrl->val);
> +		break;
>  	default:
>  		dev_err(ov9282->dev, "Invalid control %d", ctrl->id);
>  		ret = -EINVAL;
> @@ -963,7 +1007,7 @@ static int ov9282_init_controls(struct ov9282 *ov9282)
>  	u32 lpfr;
>  	int ret;
>
> -	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
> +	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10);
>  	if (ret)
>  		return ret;
>
> @@ -997,6 +1041,12 @@ static int ov9282_init_controls(struct ov9282 *ov9282)
>  						mode->vblank_max,
>  						1, mode->vblank);
>
> +	v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_VFLIP,
> +			  0, 1, 1, 1);
> +
> +	v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_HFLIP,
> +			  0, 1, 1, 1);
> +

I guess, based on the reply on the previous version, that flip by
default is correct in this case

Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>

>  	/* Read only controls */
>  	v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_PIXEL_RATE,
>  			  OV9282_PIXEL_RATE, OV9282_PIXEL_RATE, 1,
> --
> 2.34.1
>
diff mbox series

Patch

diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
index e964461ff1d3..cfb6e72d8931 100644
--- a/drivers/media/i2c/ov9282.c
+++ b/drivers/media/i2c/ov9282.c
@@ -45,6 +45,10 @@ 
 /* Group hold register */
 #define OV9282_REG_HOLD		0x3308
 
+#define OV9282_REG_TIMING_FORMAT_1	0x3820
+#define OV9282_REG_TIMING_FORMAT_2	0x3821
+#define OV9282_FLIP_BIT			BIT(2)
+
 #define OV9282_REG_MIPI_CTRL00	0x4800
 #define OV9282_GATED_CLOCK	BIT(5)
 
@@ -438,6 +442,40 @@  static int ov9282_update_exp_gain(struct ov9282 *ov9282, u32 exposure, u32 gain)
 	return ret;
 }
 
+static int ov9282_set_ctrl_hflip(struct ov9282 *ov9282, int value)
+{
+	u32 current_val;
+	int ret = ov9282_read_reg(ov9282, OV9282_REG_TIMING_FORMAT_2, 1,
+				  &current_val);
+	if (ret)
+		return ret;
+
+	if (value)
+		current_val |= OV9282_FLIP_BIT;
+	else
+		current_val &= ~OV9282_FLIP_BIT;
+
+	return ov9282_write_reg(ov9282, OV9282_REG_TIMING_FORMAT_2, 1,
+				current_val);
+}
+
+static int ov9282_set_ctrl_vflip(struct ov9282 *ov9282, int value)
+{
+	u32 current_val;
+	int ret = ov9282_read_reg(ov9282, OV9282_REG_TIMING_FORMAT_1, 1,
+				  &current_val);
+	if (ret)
+		return ret;
+
+	if (value)
+		current_val |= OV9282_FLIP_BIT;
+	else
+		current_val &= ~OV9282_FLIP_BIT;
+
+	return ov9282_write_reg(ov9282, OV9282_REG_TIMING_FORMAT_1, 1,
+				current_val);
+}
+
 /**
  * ov9282_set_ctrl() - Set subdevice control
  * @ctrl: pointer to v4l2_ctrl structure
@@ -494,6 +532,12 @@  static int ov9282_set_ctrl(struct v4l2_ctrl *ctrl)
 		lpfr = ov9282->vblank + ov9282->cur_mode->height;
 		ret = ov9282_write_reg(ov9282, OV9282_REG_LPFR, 2, lpfr);
 		break;
+	case V4L2_CID_HFLIP:
+		ret = ov9282_set_ctrl_hflip(ov9282, ctrl->val);
+		break;
+	case V4L2_CID_VFLIP:
+		ret = ov9282_set_ctrl_vflip(ov9282, ctrl->val);
+		break;
 	default:
 		dev_err(ov9282->dev, "Invalid control %d", ctrl->id);
 		ret = -EINVAL;
@@ -963,7 +1007,7 @@  static int ov9282_init_controls(struct ov9282 *ov9282)
 	u32 lpfr;
 	int ret;
 
-	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
+	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10);
 	if (ret)
 		return ret;
 
@@ -997,6 +1041,12 @@  static int ov9282_init_controls(struct ov9282 *ov9282)
 						mode->vblank_max,
 						1, mode->vblank);
 
+	v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_VFLIP,
+			  0, 1, 1, 1);
+
+	v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_HFLIP,
+			  0, 1, 1, 1);
+
 	/* Read only controls */
 	v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_PIXEL_RATE,
 			  OV9282_PIXEL_RATE, OV9282_PIXEL_RATE, 1,