| Message ID | 20221019110647.11076-1-victor.shih@genesyslogic.com.tw (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support UHS-II for GL9755 | expand |
On Wed, 19 Oct 2022 at 13:06, Victor Shih <victorshihgli@gmail.com> wrote: > > Summary > ======= > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > About UHS-II, roughly deal with the following three parts: > 1) A UHS-II detection and initialization: > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence > [2]). > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section > 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register > Setup Sequence. > > 2) Send Legacy SD command through SD-TRAN > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD > compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet > Types and Format Overview[3]). > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > 3) UHS-II Interrupt > - Except for UHS-II error interrupts, most interrupts share the original > interrupt registers. > > Patch structure > =============== > patch#1-#6: for core > patch#7-#25: for sdhci > patch#26: for GL9755 > > Changes in v5 (Oct. 19, 2022) > * rebased to the linux-kernel-v6.1-rc1 in Ulf Hansson next branch. Thanks for rebasing! Although, future wise, if you make any kind of changes to any patch in the series, please bump the version and explain what has been changed. This avoids confusion. I need some more time to have a closer look at the series, so I will get back to you again. Kind regards Uffe > * according to the guidance and overall architecture provided > by Ulf Hansson, Ben Chuang and Jason Lai to implement the > UHS-2 Core function based on the patches of the [V4,0/6] > Preparations to support SD UHS-II cards[5]. > * according to the guidance and comments provided by > Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement > the UHS-2 Host function based on the patches of the > [RFC,v3.1,00/27] Add support UHS-II for GL9755[4]. > * implement the necessary function to let the UHS-2 Core/Host > work properly. > * fix most of checkpatch warnings/errors > > Reference > ========= > [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git > [2] SD Host Controller Simplified Specification 4.20 > [3] UHS-II Simplified Addendum 1.02 > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@linaro.org/ > [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@gmail.com/ > > ----------------- original cover letter from v3.1 ----------------- > This is an interim snapshot of our next version, v4, for enabling > UHS-II on MMC/SD. > > It is focused on 'sdhci' side to address Adrian's comments regarding > "modularising" sdhci-uhs2.c. > The whole aim of this version is to get early feedback from Adrian (and > others) on this issue. Without any consensus about the code structure, > it would make little sense to go further ahead on sdhci side. > (Actually, Adrian has made no comments other than "modularising" so far.) > > I heavily reworked/refactored sdhci-uhs2.c and re-organised the patch > set to meet what I believe Adrian expects; no UHS-II related code in > Legacy (UHS-I) code or sdhci.c. > > Nevertheless, almost of all changes I made are trivial and straightforward > in this direction, and I believe that there is no logic changed since v3 > except sdhci_uhs2_irq(), as ops->irq hook, where we must deal with UHS-II > command sequences in addition to UHS-II errors. So I added extra handlings. > > I admit that there is plenty of room for improvements (for example, > handling host->flags), but again the focal point here is how sdhci-uhs2.c > should be built as a module. > > Please review this series (particularly Patch#8-#26 and #27) from this > viewpoint in the first place. > (Ben is working on 'host' side but there is no change on 'host' side > in this submission except a minor tweak.) > > Thanks, > -Takahiro Akashi > > ------ original cover letter from v3 ------ > Summary > ======= > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > About UHS-II, roughly deal with the following three parts: > 1) A UHS-II detection and initialization: > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence > [2]). > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section > 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register > Setup Sequence. > > 2) Send Legacy SD command through SD-TRAN > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD > compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet > Types and Format Overview[3]). > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > 3) UHS-II Interrupt > - Except for UHS-II error interrupts, most interrupts share the original > interrupt registers. > > Patch structure > =============== > patch#1-#7: for core > patch#8-#17: for sdhci > patch#18-#21: for GL9755 > > Tests > ===== > Ran 'dd' command to evaluate the performance: > (SanDisk UHS-II card on GL9755 controller) > Read Write > UHS-II disabled (UHS-I): 88.3MB/s 60.7MB/s > UHS-II enabled : 206MB/s 80MB/s > > TODO > ==== > - replace some define with BIT macro > > Reference > ========= > [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git > [2] SD Host Controller Simplified Specification 4.20 > [3] UHS-II Simplified Addendum 1.02 > > Changes in v3 (Jul. 10, 2020) > * rebased to v5.8-rc4 > * add copyright notice > * reorganize the patch set and split some commits into smaller ones > * separate uhs-2 headers from others > * correct wrong spellings > * fix most of checkpatch warnings/errors > * remove all k[cz]alloc() from the code > * guard sdhci-uhs2 specific code with > 'if (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2))' > * make sdhci-uhs2.c as a module > * trivial changes, including > - rename back sdhci-core.c to sdhci.c > - allow vendor code to disable uhs2 if v4_mode == 0 > in __sdhci_add_host() > - merge uhs2_power_up() into mmc_power_up() > - remove flag_uhs2 from mmc_attach_sd() > - add function descriptions to EXPORT'ed functions > - other minor code optimization > > Changes in v2 (Jan. 9, 2020) > * rebased to v5.5-rc5 > > AKASHI Takahiro (5): > mmc: sdhci: add a kernel configuration for enabling UHS-II support > mmc: sdhci: add UHS-II module > mmc: sdhci-uhs2: dump UHS-II registers > mmc: sdhci-uhs2: add set_timeout() > mmc: sdhci-pci: add UHS-II support framework > > Ben Chuang (1): > mmc: sdhci-uhs2: add post-mmc_attach_sd hook > > Ulf Hansson (4): > mmc: core: Cleanup printing of speed mode at card insertion > mmc: core: Prepare to support SD UHS-II cards > mmc: core: Announce successful insertion of an SD UHS-II card > mmc: core: Extend support for mmc regulators with a vqmmc2 > > Victor Shih (16): > mmc: core: Add definitions for SD UHS-II cards > mmc: core: Support UHS-II card control and access > mmc: sdhci: add UHS-II related definitions in headers > mmc: sdhci-uhs2: add reset function and uhs2_mode function > mmc: sdhci-uhs2: add set_power() to support vdd2 > mmc: sdhci-uhs2: skip signal_voltage_switch() > mmc: sdhci-uhs2: add set_ios() > mmc: sdhci-uhs2: add detect_init() to detect the interface > mmc: sdhci-uhs2: add clock operations > mmc: sdhci-uhs2: add uhs2_control() to initialise the interface > mmc: sdhci-uhs2: add request() and others > mmc: sdhci-uhs2: add irq() and others > mmc: sdhci-uhs2: add add_host() and others to set up the driver > mmc: sdhci-uhs2: add pre-detect_init hook > mmc: core: add post-mmc_attach_sd hook > mmc: sdhci-pci-gli: enable UHS-II mode for GL9755 > > drivers/mmc/core/Makefile | 2 +- > drivers/mmc/core/block.c | 6 +- > drivers/mmc/core/bus.c | 38 +- > drivers/mmc/core/core.c | 49 +- > drivers/mmc/core/core.h | 1 + > drivers/mmc/core/host.h | 4 + > drivers/mmc/core/mmc_ops.c | 25 +- > drivers/mmc/core/mmc_ops.h | 1 + > drivers/mmc/core/regulator.c | 34 + > drivers/mmc/core/sd.c | 16 +- > drivers/mmc/core/sd.h | 3 + > drivers/mmc/core/sd_ops.c | 18 + > drivers/mmc/core/sd_ops.h | 3 + > drivers/mmc/core/sd_uhs2.c | 1394 +++++++++++++++++++++++++ > drivers/mmc/host/Kconfig | 10 + > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/sdhci-pci-core.c | 17 +- > drivers/mmc/host/sdhci-pci-gli.c | 310 +++++- > drivers/mmc/host/sdhci-pci.h | 3 + > drivers/mmc/host/sdhci-uhs2.c | 1606 +++++++++++++++++++++++++++++ > drivers/mmc/host/sdhci-uhs2.h | 226 ++++ > drivers/mmc/host/sdhci.c | 342 +++--- > drivers/mmc/host/sdhci.h | 125 ++- > include/linux/mmc/card.h | 47 + > include/linux/mmc/core.h | 13 + > include/linux/mmc/host.h | 99 ++ > include/linux/mmc/sd_uhs2.h | 263 +++++ > 27 files changed, 4486 insertions(+), 170 deletions(-) > create mode 100644 drivers/mmc/core/sd_uhs2.c > create mode 100644 drivers/mmc/host/sdhci-uhs2.c > create mode 100644 drivers/mmc/host/sdhci-uhs2.h > create mode 100644 include/linux/mmc/sd_uhs2.h > > -- > 2.25.1 >
Hi, Ulf Ulf Hansson <ulf.hansson@linaro.org> 於 2022年10月19日 週三 晚上7:30寫道： > > On Wed, 19 Oct 2022 at 13:06, Victor Shih <victorshihgli@gmail.com> wrote: > > > > Summary > > ======= > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > > > About UHS-II, roughly deal with the following three parts: > > 1) A UHS-II detection and initialization: > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence > > [2]). > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section > > 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register > > Setup Sequence. > > > > 2) Send Legacy SD command through SD-TRAN > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD > > compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet > > Types and Format Overview[3]). > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > > > 3) UHS-II Interrupt > > - Except for UHS-II error interrupts, most interrupts share the original > > interrupt registers. > > > > Patch structure > > =============== > > patch#1-#6: for core > > patch#7-#25: for sdhci > > patch#26: for GL9755 > > > > Changes in v5 (Oct. 19, 2022) > > * rebased to the linux-kernel-v6.1-rc1 in Ulf Hansson next branch. > > Thanks for rebasing! > > Although, future wise, if you make any kind of changes to any patch in > the series, please bump the version and explain what has been changed. > This avoids confusion. > > I need some more time to have a closer look at the series, so I will > get back to you again. > > Kind regards > Uffe > I will follow your advice. When I make any kind of changes to any patch in the series, I will update the version and explain it. I have a small hope that if you already have a closer look a paragraph at the series, could you let me know your comments first, let me check it first. Thanks, Victor Shih > > > * according to the guidance and overall architecture provided > > by Ulf Hansson, Ben Chuang and Jason Lai to implement the > > UHS-2 Core function based on the patches of the [V4,0/6] > > Preparations to support SD UHS-II cards[5]. > > * according to the guidance and comments provided by > > Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement > > the UHS-2 Host function based on the patches of the > > [RFC,v3.1,00/27] Add support UHS-II for GL9755[4]. > > * implement the necessary function to let the UHS-2 Core/Host > > work properly. > > * fix most of checkpatch warnings/errors > > > > Reference > > ========= > > [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git > > [2] SD Host Controller Simplified Specification 4.20 > > [3] UHS-II Simplified Addendum 1.02 > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@linaro.org/ > > [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@gmail.com/ > > > > ----------------- original cover letter from v3.1 ----------------- > > This is an interim snapshot of our next version, v4, for enabling > > UHS-II on MMC/SD. > > > > It is focused on 'sdhci' side to address Adrian's comments regarding > > "modularising" sdhci-uhs2.c. > > The whole aim of this version is to get early feedback from Adrian (and > > others) on this issue. Without any consensus about the code structure, > > it would make little sense to go further ahead on sdhci side. > > (Actually, Adrian has made no comments other than "modularising" so far.) > > > > I heavily reworked/refactored sdhci-uhs2.c and re-organised the patch > > set to meet what I believe Adrian expects; no UHS-II related code in > > Legacy (UHS-I) code or sdhci.c. > > > > Nevertheless, almost of all changes I made are trivial and straightforward > > in this direction, and I believe that there is no logic changed since v3 > > except sdhci_uhs2_irq(), as ops->irq hook, where we must deal with UHS-II > > command sequences in addition to UHS-II errors. So I added extra handlings. > > > > I admit that there is plenty of room for improvements (for example, > > handling host->flags), but again the focal point here is how sdhci-uhs2.c > > should be built as a module. > > > > Please review this series (particularly Patch#8-#26 and #27) from this > > viewpoint in the first place. > > (Ben is working on 'host' side but there is no change on 'host' side > > in this submission except a minor tweak.) > > > > Thanks, > > -Takahiro Akashi > > > > ------ original cover letter from v3 ------ > > Summary > > ======= > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > > > About UHS-II, roughly deal with the following three parts: > > 1) A UHS-II detection and initialization: > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence > > [2]). > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section > > 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register > > Setup Sequence. > > > > 2) Send Legacy SD command through SD-TRAN > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD > > compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet > > Types and Format Overview[3]). > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > > > 3) UHS-II Interrupt > > - Except for UHS-II error interrupts, most interrupts share the original > > interrupt registers. > > > > Patch structure > > =============== > > patch#1-#7: for core > > patch#8-#17: for sdhci > > patch#18-#21: for GL9755 > > > > Tests > > ===== > > Ran 'dd' command to evaluate the performance: > > (SanDisk UHS-II card on GL9755 controller) > > Read Write > > UHS-II disabled (UHS-I): 88.3MB/s 60.7MB/s > > UHS-II enabled : 206MB/s 80MB/s > > > > TODO > > ==== > > - replace some define with BIT macro > > > > Reference > > ========= > > [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git > > [2] SD Host Controller Simplified Specification 4.20 > > [3] UHS-II Simplified Addendum 1.02 > > > > Changes in v3 (Jul. 10, 2020) > > * rebased to v5.8-rc4 > > * add copyright notice > > * reorganize the patch set and split some commits into smaller ones > > * separate uhs-2 headers from others > > * correct wrong spellings > > * fix most of checkpatch warnings/errors > > * remove all k[cz]alloc() from the code > > * guard sdhci-uhs2 specific code with > > 'if (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2))' > > * make sdhci-uhs2.c as a module > > * trivial changes, including > > - rename back sdhci-core.c to sdhci.c > > - allow vendor code to disable uhs2 if v4_mode == 0 > > in __sdhci_add_host() > > - merge uhs2_power_up() into mmc_power_up() > > - remove flag_uhs2 from mmc_attach_sd() > > - add function descriptions to EXPORT'ed functions > > - other minor code optimization > > > > Changes in v2 (Jan. 9, 2020) > > * rebased to v5.5-rc5 > > > > AKASHI Takahiro (5): > > mmc: sdhci: add a kernel configuration for enabling UHS-II support > > mmc: sdhci: add UHS-II module > > mmc: sdhci-uhs2: dump UHS-II registers > > mmc: sdhci-uhs2: add set_timeout() > > mmc: sdhci-pci: add UHS-II support framework > > > > Ben Chuang (1): > > mmc: sdhci-uhs2: add post-mmc_attach_sd hook > > > > Ulf Hansson (4): > > mmc: core: Cleanup printing of speed mode at card insertion > > mmc: core: Prepare to support SD UHS-II cards > > mmc: core: Announce successful insertion of an SD UHS-II card > > mmc: core: Extend support for mmc regulators with a vqmmc2 > > > > Victor Shih (16): > > mmc: core: Add definitions for SD UHS-II cards > > mmc: core: Support UHS-II card control and access > > mmc: sdhci: add UHS-II related definitions in headers > > mmc: sdhci-uhs2: add reset function and uhs2_mode function > > mmc: sdhci-uhs2: add set_power() to support vdd2 > > mmc: sdhci-uhs2: skip signal_voltage_switch() > > mmc: sdhci-uhs2: add set_ios() > > mmc: sdhci-uhs2: add detect_init() to detect the interface > > mmc: sdhci-uhs2: add clock operations > > mmc: sdhci-uhs2: add uhs2_control() to initialise the interface > > mmc: sdhci-uhs2: add request() and others > > mmc: sdhci-uhs2: add irq() and others > > mmc: sdhci-uhs2: add add_host() and others to set up the driver > > mmc: sdhci-uhs2: add pre-detect_init hook > > mmc: core: add post-mmc_attach_sd hook > > mmc: sdhci-pci-gli: enable UHS-II mode for GL9755 > > > > drivers/mmc/core/Makefile | 2 +- > > drivers/mmc/core/block.c | 6 +- > > drivers/mmc/core/bus.c | 38 +- > > drivers/mmc/core/core.c | 49 +- > > drivers/mmc/core/core.h | 1 + > > drivers/mmc/core/host.h | 4 + > > drivers/mmc/core/mmc_ops.c | 25 +- > > drivers/mmc/core/mmc_ops.h | 1 + > > drivers/mmc/core/regulator.c | 34 + > > drivers/mmc/core/sd.c | 16 +- > > drivers/mmc/core/sd.h | 3 + > > drivers/mmc/core/sd_ops.c | 18 + > > drivers/mmc/core/sd_ops.h | 3 + > > drivers/mmc/core/sd_uhs2.c | 1394 +++++++++++++++++++++++++ > > drivers/mmc/host/Kconfig | 10 + > > drivers/mmc/host/Makefile | 1 + > > drivers/mmc/host/sdhci-pci-core.c | 17 +- > > drivers/mmc/host/sdhci-pci-gli.c | 310 +++++- > > drivers/mmc/host/sdhci-pci.h | 3 + > > drivers/mmc/host/sdhci-uhs2.c | 1606 +++++++++++++++++++++++++++++ > > drivers/mmc/host/sdhci-uhs2.h | 226 ++++ > > drivers/mmc/host/sdhci.c | 342 +++--- > > drivers/mmc/host/sdhci.h | 125 ++- > > include/linux/mmc/card.h | 47 + > > include/linux/mmc/core.h | 13 + > > include/linux/mmc/host.h | 99 ++ > > include/linux/mmc/sd_uhs2.h | 263 +++++ > > 27 files changed, 4486 insertions(+), 170 deletions(-) > > create mode 100644 drivers/mmc/core/sd_uhs2.c > > create mode 100644 drivers/mmc/host/sdhci-uhs2.c > > create mode 100644 drivers/mmc/host/sdhci-uhs2.h > > create mode 100644 include/linux/mmc/sd_uhs2.h > > > > -- > > 2.25.1 > > Thanks, Victor Shih
On 19/10/22 14:06, Victor Shih wrote: > Summary > ======= > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > About UHS-II, roughly deal with the following three parts: > 1) A UHS-II detection and initialization: > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence > [2]). > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section > 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register > Setup Sequence. > > 2) Send Legacy SD command through SD-TRAN > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD > compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet > Types and Format Overview[3]). > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > 3) UHS-II Interrupt > - Except for UHS-II error interrupts, most interrupts share the original > interrupt registers. > > Patch structure > =============== > patch#1-#6: for core > patch#7-#25: for sdhci > patch#26: for GL9755 Thanks for putting this together. I haven't looked at all the patches, but have requested quite a lot of small changes, so there should be enough to be going on with for now.
Hi, Adrian Adrian Hunter <adrian.hunter@intel.com> 於 2022年11月2日 週三 凌晨1:28寫道： > > On 19/10/22 14:06, Victor Shih wrote: > > Summary > > ======= > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > > > About UHS-II, roughly deal with the following three parts: > > 1) A UHS-II detection and initialization: > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence > > [2]). > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section > > 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register > > Setup Sequence. > > > > 2) Send Legacy SD command through SD-TRAN > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD > > compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet > > Types and Format Overview[3]). > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > > > 3) UHS-II Interrupt > > - Except for UHS-II error interrupts, most interrupts share the original > > interrupt registers. > > > > Patch structure > > =============== > > patch#1-#6: for core > > patch#7-#25: for sdhci > > patch#26: for GL9755 > > Thanks for putting this together. > > I haven't looked at all the patches, but have requested quite > a lot of small changes, so there should be enough to be going > on with for now. Thanks for your help. I will confirm your advice in each patch and follow your advice to change. Thanks, Victor Shih
Summary ======= These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. About UHS-II, roughly deal with the following three parts: 1) A UHS-II detection and initialization: - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence [2]). - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register Setup Sequence. 2) Send Legacy SD command through SD-TRAN - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet Types and Format Overview[3]). - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). 3) UHS-II Interrupt - Except for UHS-II error interrupts, most interrupts share the original interrupt registers. Patch structure =============== patch#1-#6: for core patch#7-#25: for sdhci patch#26: for GL9755 Changes in v5 (Oct. 19, 2022) * rebased to the linux-kernel-v6.1-rc1 in Ulf Hansson next branch. * according to the guidance and overall architecture provided by Ulf Hansson, Ben Chuang and Jason Lai to implement the UHS-2 Core function based on the patches of the [V4,0/6] Preparations to support SD UHS-II cards[5]. * according to the guidance and comments provided by Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement the UHS-2 Host function based on the patches of the [RFC,v3.1,00/27] Add support UHS-II for GL9755[4]. * implement the necessary function to let the UHS-2 Core/Host work properly. * fix most of checkpatch warnings/errors Reference ========= [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git [2] SD Host Controller Simplified Specification 4.20 [3] UHS-II Simplified Addendum 1.02 [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@linaro.org/ [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@gmail.com/ ----------------- original cover letter from v3.1 ----------------- This is an interim snapshot of our next version, v4, for enabling UHS-II on MMC/SD. It is focused on 'sdhci' side to address Adrian's comments regarding "modularising" sdhci-uhs2.c. The whole aim of this version is to get early feedback from Adrian (and others) on this issue. Without any consensus about the code structure, it would make little sense to go further ahead on sdhci side. (Actually, Adrian has made no comments other than "modularising" so far.) I heavily reworked/refactored sdhci-uhs2.c and re-organised the patch set to meet what I believe Adrian expects; no UHS-II related code in Legacy (UHS-I) code or sdhci.c. Nevertheless, almost of all changes I made are trivial and straightforward in this direction, and I believe that there is no logic changed since v3 except sdhci_uhs2_irq(), as ops->irq hook, where we must deal with UHS-II command sequences in addition to UHS-II errors. So I added extra handlings. I admit that there is plenty of room for improvements (for example, handling host->flags), but again the focal point here is how sdhci-uhs2.c should be built as a module. Please review this series (particularly Patch#8-#26 and #27) from this viewpoint in the first place. (Ben is working on 'host' side but there is no change on 'host' side in this submission except a minor tweak.) Thanks, -Takahiro Akashi ------ original cover letter from v3 ------ Summary ======= These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. About UHS-II, roughly deal with the following three parts: 1) A UHS-II detection and initialization: - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence [2]). - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register Setup Sequence. 2) Send Legacy SD command through SD-TRAN - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet Types and Format Overview[3]). - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). 3) UHS-II Interrupt - Except for UHS-II error interrupts, most interrupts share the original interrupt registers. Patch structure =============== patch#1-#7: for core patch#8-#17: for sdhci patch#18-#21: for GL9755 Tests ===== Ran 'dd' command to evaluate the performance: (SanDisk UHS-II card on GL9755 controller) Read Write UHS-II disabled (UHS-I): 88.3MB/s 60.7MB/s UHS-II enabled : 206MB/s 80MB/s TODO ==== - replace some define with BIT macro Reference ========= [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git [2] SD Host Controller Simplified Specification 4.20 [3] UHS-II Simplified Addendum 1.02 Changes in v3 (Jul. 10, 2020) * rebased to v5.8-rc4 * add copyright notice * reorganize the patch set and split some commits into smaller ones * separate uhs-2 headers from others * correct wrong spellings * fix most of checkpatch warnings/errors * remove all k[cz]alloc() from the code * guard sdhci-uhs2 specific code with 'if (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2))' * make sdhci-uhs2.c as a module * trivial changes, including - rename back sdhci-core.c to sdhci.c - allow vendor code to disable uhs2 if v4_mode == 0 in __sdhci_add_host() - merge uhs2_power_up() into mmc_power_up() - remove flag_uhs2 from mmc_attach_sd() - add function descriptions to EXPORT'ed functions - other minor code optimization Changes in v2 (Jan. 9, 2020) * rebased to v5.5-rc5 AKASHI Takahiro (5): mmc: sdhci: add a kernel configuration for enabling UHS-II support mmc: sdhci: add UHS-II module mmc: sdhci-uhs2: dump UHS-II registers mmc: sdhci-uhs2: add set_timeout() mmc: sdhci-pci: add UHS-II support framework Ben Chuang (1): mmc: sdhci-uhs2: add post-mmc_attach_sd hook Ulf Hansson (4): mmc: core: Cleanup printing of speed mode at card insertion mmc: core: Prepare to support SD UHS-II cards mmc: core: Announce successful insertion of an SD UHS-II card mmc: core: Extend support for mmc regulators with a vqmmc2 Victor Shih (16): mmc: core: Add definitions for SD UHS-II cards mmc: core: Support UHS-II card control and access mmc: sdhci: add UHS-II related definitions in headers mmc: sdhci-uhs2: add reset function and uhs2_mode function mmc: sdhci-uhs2: add set_power() to support vdd2 mmc: sdhci-uhs2: skip signal_voltage_switch() mmc: sdhci-uhs2: add set_ios() mmc: sdhci-uhs2: add detect_init() to detect the interface mmc: sdhci-uhs2: add clock operations mmc: sdhci-uhs2: add uhs2_control() to initialise the interface mmc: sdhci-uhs2: add request() and others mmc: sdhci-uhs2: add irq() and others mmc: sdhci-uhs2: add add_host() and others to set up the driver mmc: sdhci-uhs2: add pre-detect_init hook mmc: core: add post-mmc_attach_sd hook mmc: sdhci-pci-gli: enable UHS-II mode for GL9755 drivers/mmc/core/Makefile | 2 +- drivers/mmc/core/block.c | 6 +- drivers/mmc/core/bus.c | 38 +- drivers/mmc/core/core.c | 49 +- drivers/mmc/core/core.h | 1 + drivers/mmc/core/host.h | 4 + drivers/mmc/core/mmc_ops.c | 25 +- drivers/mmc/core/mmc_ops.h | 1 + drivers/mmc/core/regulator.c | 34 + drivers/mmc/core/sd.c | 16 +- drivers/mmc/core/sd.h | 3 + drivers/mmc/core/sd_ops.c | 18 + drivers/mmc/core/sd_ops.h | 3 + drivers/mmc/core/sd_uhs2.c | 1394 +++++++++++++++++++++++++ drivers/mmc/host/Kconfig | 10 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-pci-core.c | 17 +- drivers/mmc/host/sdhci-pci-gli.c | 310 +++++- drivers/mmc/host/sdhci-pci.h | 3 + drivers/mmc/host/sdhci-uhs2.c | 1606 +++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-uhs2.h | 226 ++++ drivers/mmc/host/sdhci.c | 342 +++--- drivers/mmc/host/sdhci.h | 125 ++- include/linux/mmc/card.h | 47 + include/linux/mmc/core.h | 13 + include/linux/mmc/host.h | 99 ++ include/linux/mmc/sd_uhs2.h | 263 +++++ 27 files changed, 4486 insertions(+), 170 deletions(-) create mode 100644 drivers/mmc/core/sd_uhs2.c create mode 100644 drivers/mmc/host/sdhci-uhs2.c create mode 100644 drivers/mmc/host/sdhci-uhs2.h create mode 100644 include/linux/mmc/sd_uhs2.h