diff mbox series

[v3,05/11] ARM: dts: suniv: add USB-related device nodes

Message ID 20221106154826.6687-6-andre.przywara@arm.com (mailing list archive)
State New, archived
Headers show
Series ARM: suniv: USB and PopStick board support | expand

Commit Message

Andre Przywara Nov. 6, 2022, 3:48 p.m. UTC 
From: Icenowy Zheng <uwu@icenowy.me>

The suniv SoC has a USB OTG controller and a USB PHY like other
Allwinner SoCs.

Add their device tree node.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 arch/arm/boot/dts/suniv-f1c100s.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Comments

Jernej Škrabec Nov. 7, 2022, 5:19 p.m. UTC | #1 
Dne nedelja, 06. november 2022 ob 16:48:20 CET je Andre Przywara napisal(a):
> From: Icenowy Zheng <uwu@icenowy.me>
> 
> The suniv SoC has a USB OTG controller and a USB PHY like other
> Allwinner SoCs.
> 
> Add their device tree node.
> 
> Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
index 0edc1724407b..a01541ba42c5 100644
--- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -133,6 +133,32 @@  mmc1: mmc@1c10000 {
 			#size-cells = <0>;
 		};
 
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,suniv-f1c100s-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <26>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,suniv-f1c100s-usb-phy";
+			reg = <0x01c13400 0x10>;
+			reg-names = "phy_ctrl";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
 		ccu: clock@1c20000 {
 			compatible = "allwinner,suniv-f1c100s-ccu";
 			reg = <0x01c20000 0x400>;