new file mode 100644
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ * <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include "msm8976.dtsi"
+
+&pmu {
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+};
+
+/*
+ * You might be wondering.. why is it so empty out there?
+ * Well, the SoCs are almost identical.
+ */
new file mode 100644
@@ -0,0 +1,1208 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ * <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-msm8976.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+ interrupt-parent = <&intc>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ enable-method = "psci";
+ cpu-idle-states = <&little_cpu_sleep_0>;
+ capacity-dmips-mhz = <573>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ enable-method = "psci";
+ cpu-idle-states = <&little_cpu_sleep_0>;
+ capacity-dmips-mhz = <573>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ enable-method = "psci";
+ cpu-idle-states = <&little_cpu_sleep_0>;
+ capacity-dmips-mhz = <573>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ enable-method = "psci";
+ cpu-idle-states = <&little_cpu_sleep_0>;
+ capacity-dmips-mhz = <573>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ CPU4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x100>;
+ enable-method = "psci";
+ cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ CPU5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x101>;
+ enable-method = "psci";
+ cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ CPU6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x102>;
+ enable-method = "psci";
+ cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ CPU7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x103>;
+ enable-method = "psci";
+ cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+
+ core1 {
+ cpu = <&CPU5>;
+ };
+
+ core2 {
+ cpu = <&CPU6>;
+ };
+
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ little_cpu_sleep_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-power-collapse";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <181>;
+ exit-latency-us = <149>;
+ min-residency-us = <703>;
+ local-timer-stop;
+ };
+
+ big_cpu_sleep_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-retention";
+ arm,psci-suspend-param = <0x00000002>;
+ entry-latency-us = <142>;
+ exit-latency-us = <99>;
+ min-residency-us = <242>;
+ };
+
+ big_cpu_sleep_1: cpu-sleep-1-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-power-collapse";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <158>;
+ exit-latency-us = <144>;
+ min-residency-us = <863>;
+ local-timer-stop;
+ };
+ };
+
+ l2_0: l2-cache0 {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+
+ l2_1: l2-cache1 {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-msm8976", "qcom,scm";
+ clocks = <&gcc GCC_CRYPTO_CLK>,
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_AHB_CLK>;
+ clock-names = "core", "bus", "iface";
+ #reset-cells = <1>;
+
+ qcom,dload-mode = <&tcsr 0x6100>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0x80000000 0x0 0x0>;
+ };
+
+ pmu: pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ cont_splash_mem: memory@83000000 {
+ reg = <0x0 0x83000000 0x0 0x2800000>;
+ };
+
+ ext_region: memory@85b00000 {
+ reg = <0x0 0x85b00000 0x0 0x500000>;
+ no-map;
+ };
+
+ smem: memory@86300000 {
+ compatible = "qcom,smem";
+ reg = <0x0 0x86300000 0x0 0x100000>;
+ no-map;
+
+ hwlocks = <&tcsr_mutex 3>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ };
+
+ removed_mem: memory@86400000 {
+ reg = <0x0 0x86400000 0x0 0x800000>;
+ no-map;
+ };
+
+ mpss_region: memory@86c00000 {
+ reg = <0x0 0x86c00000 0x0 0x5600000>;
+ no-map;
+ };
+
+ lpass_region: memory@8c200000 {
+ reg = <0x0 0x8c200000 0x0 0x1800000>;
+ no-map;
+ };
+
+ venus_region: memory@8da00000 {
+ reg = <0x0 0x8da00000 0x0 0x2600000>;
+ no-map;
+ };
+
+ tz_apps: memory@8dd00000 {
+ reg = <0x0 0x8dd00000 0x0 0x1400000>;
+ no-map;
+ };
+ };
+
+ smp2p-hexagon {
+ compatible = "qcom,smp2p";
+ interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+ qcom,smem = <443>, <429>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-modem {
+ compatible = "qcom,smp2p";
+ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 13>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+ qcom,smem = <435>, <428>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-wcnss {
+ compatible = "qcom,smp2p";
+ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 17>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <4>;
+ qcom,smem = <451>, <431>;
+
+ wcnss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wcnss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8976";
+ qcom,smd-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8976-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
+ };
+
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+ };
+
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp5 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp7 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+
+ rpmpd_opp_turbo_no_cpr: opp10 {
+ opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+ };
+
+ rpmpd_opp_turbo_high: opp111 {
+ opp-level = <RPM_SMD_LEVEL_TURBO_HIGH>;
+ };
+ };
+ };
+ };
+ };
+ };
+
+ smsm {
+ compatible = "qcom,smsm";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ qcom,ipc-1 = <&apcs 8 12>;
+ qcom,ipc-2 = <&apcs 8 9>;
+ qcom,ipc-3 = <&apcs 8 18>;
+
+ apps_smsm: apps@0 {
+ reg = <0>;
+ #qcom,smem-state-cells = <1>;
+ };
+
+ hexagon_smsm: hexagon@1 {
+ reg = <1>;
+ interrupts = <0 290 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ wcnss_smsm: wcnss@6 {
+ reg = <6>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ soc: soc@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ rng@22000 {
+ compatible = "qcom,prng";
+ reg = <0x00022000 0x140>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
+
+ rpm_msg_ram: sram@60000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x00060000 0x8000>;
+ };
+
+ usb_hs_phy: phy@6c000 {
+ compatible = "qcom,usb-hs-28nm-femtophy";
+ reg = <0x0006c000 0x200>;
+ #phy-cells = <0>;
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "ref", "ahb", "sleep";
+ resets = <&gcc RST_QUSB2_PHY_BCR>,
+ <&gcc RST_USB2_HS_PHY_ONLY_BCR>;
+ reset-names = "phy", "por";
+ status = "disabled";
+ };
+
+ qfprom: qfprom@a4000 {
+ compatible = "qcom,msm8976-qfprom", "qcom,qfprom";
+ reg = <0x000a4000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ tsens_caldata: caldata@218 {
+ reg = <0x218 0x18>;
+ };
+ };
+
+ tsens: thermal-sensor@4a9000 {
+ compatible = "qcom,msm8976-tsens", "qcom,tsens-v1";
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+ nvmem-cells = <&tsens_caldata>;
+ nvmem-cell-names = "calib";
+ #qcom,sensors = <11>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,msm8976-pinctrl";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ spi1_default: spi0-default-state {
+ spi-pins {
+ pins = "gpio0", "gpio1", "gpio3";
+ function = "blsp_spi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ cs-pins {
+ pins = "gpio2";
+ function = "blsp_spi1";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ spi1_sleep: spi0-sleep-state {
+ spi-pins {
+ pins = "gpio0", "gpio1", "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cs-pins {
+ pins = "gpio2";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp1_i2c2_default: blsp1-i2c2-default-state {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
+ pins = "gpio6", "gpio7";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c4_default: blsp1-i2c4-default-state {
+ pins = "gpio14", "gpio15";
+ function = "blsp_i2c4";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
+ pins = "gpio14", "gpio15";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_uart2_active: blsp2-uart2-active-state {
+ pins = "gpio20", "gpio21";
+ function = "blsp_uart6";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ blsp2_uart2_sleep: blsp2-uart2-sleep-state {
+ pins = "gpio20", "gpio21";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ /* 4 (not 6!) interfaces per QUP, BLSP2 indexes are numbered (n)+4 */
+ blsp2_i2c2_default: blsp2-i2c2-default-state {
+ pins = "gpio22", "gpio23";
+ function = "blsp_i2c6";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
+ pins = "gpio22", "gpio23";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c4_default: blsp2-i2c4-default-state {
+ pins = "gpio18", "gpio19";
+ function = "blsp_i2c8";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
+ pins = "gpio18", "gpio19";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ gcc: clock-controller@1800000 {
+ compatible = "qcom,gcc-msm8976";
+ reg = <0x01800000 0x80000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ assigned-clocks = <&gcc GPLL3>;
+ assigned-clock-rates = <1100000000>;
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ clock-names = "xo",
+ "xo_a",
+ "dsi0pll",
+ "dsi0pllbyte",
+ "dsi1pll",
+ "dsi1pllbyte";
+ };
+
+ tcsr_mutex: hwlock@1905000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x01905000 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
+ tcsr: syscon@1937000 {
+ compatible = "qcom,tcsr-msm8976", "syscon";
+ reg = <0x01937000 0x30000>;
+ };
+
+ spmi_bus: spmi@200f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0200f000 0x1000>,
+ <0x02400000 0x800000>,
+ <0x02c00000 0x800000>,
+ <0x03800000 0x200000>,
+ <0x0200a000 0x2100>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "periph_irq";
+ qcom,channel = <0>;
+ qcom,ee = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ cell-index = <0>;
+ };
+
+ sdhc_1: mmc@7824000 {
+ compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
+ reg = <0x07824900 0x500>, <0x07824000 0x800>;
+ reg-names = "hc", "core";
+
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "core", "xo";
+
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+ };
+
+ sdhc_2: mmc@7864000 {
+ compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
+ reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+ reg-names = "hc", "core";
+
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "core", "xo";
+
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ blsp1_dma: dma-controller@7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07884000 0x1f000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ blsp1_uart1: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078af000 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ blsp1_uart2: serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078b0000 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ blsp1_spi1: spi@78b5000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b5000 0x500>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi1_default>;
+ pinctrl-1 = <&spi1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp1_i2c2: i2c@78b6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b6000 0x500>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ clock-frequency = <400000>;
+ dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c2_default>;
+ pinctrl-1 = <&blsp1_i2c2_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp1_i2c4: i2c@78b8000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b8000 0x500>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ clock-frequency = <400000>;
+ dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c4_default>;
+ pinctrl-1 = <&blsp1_i2c4_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ otg: usb@78db000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0x078db000 0x200>,
+ <0x078db200 0x200>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_USB_HS_AHB_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ clock-names = "iface", "core";
+ assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ assigned-clock-rates = <80000000>;
+ resets = <&gcc RST_USB_HS_BCR>;
+ reset-names = "core";
+ ahb-burst-config = <0>;
+ dr_mode = "peripheral";
+ phy_type = "ulpi";
+ phy-names = "usb-phy";
+ phys = <&usb_hs_phy>;
+ status = "disabled";
+ #reset-cells = <1>;
+ };
+
+ sdhc_3: mmc@7a24000 {
+ compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
+ reg = <0x07a24900 0x11c>, <0x07a24000 0x800>;
+ reg-names = "hc", "core";
+
+ interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+ <&gcc GCC_SDCC3_APPS_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "core", "xo";
+ bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ blsp2_dma: dma-controller@7ac4000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07ac4000 0x1f000>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ blsp2_uart2: serial@7af0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x07af0000 0x200>;
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ blsp2_i2c2: i2c@7af6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x07af6000 0x600>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ clock-frequency = <400000>;
+ dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c2_default>;
+ pinctrl-1 = <&blsp2_i2c2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp2_i2c4: i2c@7af8000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x07af8000 0x600>;
+ interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ clock-frequency = <400000>;
+ dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c4_default>;
+ pinctrl-1 = <&blsp2_i2c4_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ apcs: syscon@b011000 {
+ compatible = "syscon";
+ reg = <0x0b011000 0x1000>;
+ };
+
+ timer@b120000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0b120000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <19200000>;
+
+ frame@b121000 {
+ reg = <0x0b121000 0x1000>, <0x0b122000 0x1000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <0>;
+ };
+
+ frame@b123000 {
+ reg = <0x0b123000 0x1000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <1>;
+ status = "disabled";
+ };
+
+ frame@b124000 {
+ reg = <0x0b124000 0x1000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <2>;
+ status = "disabled";
+ };
+
+ frame@b125000 {
+ reg = <0x0b125000 0x1000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <3>;
+ status = "disabled";
+ };
+
+ frame@b126000 {
+ reg = <0x0b126000 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <4>;
+ status = "disabled";
+ };
+
+ frame@b127000 {
+ reg = <0x0b127000 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <5>;
+ status = "disabled";
+ };
+
+ frame@b128000 {
+ reg = <0x0b128000 0x1000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <6>;
+ status = "disabled";
+ };
+ };
+
+ imem: imem@8600000 {
+ compatible = "simple-mfd";
+ reg = <0x08600000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0 0x08600000 0x1000>;
+
+ pil-reloc@94c {
+ compatible = "qcom,pil-reloc-info";
+ reg = <0x94c 0xc8>;
+ };
+ };
+ };
+
+ thermal-zones {
+ aoss0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 0>;
+
+ trips {
+ aoss0_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 1>;
+ trips {
+ modem_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ qdsp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 2>;
+ trips {
+ qdsp_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cam-isp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 3>;
+ trips {
+ cam_isp_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cpu4-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ cpu4_alert0: trip-point0 {
+ temperature = <50000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cpu4_alert1: trip-point1 {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu4_crit: cpu-crit {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ cpu5_alert0: trip-point0 {
+ temperature = <50000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cpu5_alert1: trip-point1 {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu5_crit: cpu-crit {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu6-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens 6>;
+
+ trips {
+ cpu6_alert0: trip-point0 {
+ temperature = <50000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cpu6_alert1: trip-point1 {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu6_crit: cpu-crit {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens 7>;
+
+ trips {
+ cpu7_alert0: trip-point0 {
+ temperature = <50000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cpu7_alert1: trip-point1 {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu7_crit: cpu-crit {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ big-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens 8>;
+
+ trips {
+ l2_alert0: trip-point0 {
+ temperature = <50000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ l2_alert1: trip-point1 {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ l2_crit: l2-crit {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens 9>;
+
+ trips {
+ cpu0_alert0: trip-point0 {
+ temperature = <50000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cpu0_alert1: trip-point1 {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu0_crit: cpu-crit {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens 10>;
+
+ trips {
+ gpu_alert0: trip-point0 {
+ temperature = <50000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ gpu_alert1: trip-point1 {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ gpu_crit: gpu-crit {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <19200000>;
+ };
+};