| Message ID | 20221014102151.108539-4-p.rajanbabu@samsung.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | ASoC: samsung: fsd: audio support for FSD SoC | expand |
On Fri, Oct 14, 2022 at 03:51:48PM +0530, Padmanabhan Rajanbabu wrote: > Add dt-binding reference document to configure the DAI link for Tesla > FSD sound card driver. The simple-card or graph-card bindings don't work for you? > > Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> > --- > .../bindings/sound/tesla,fsd-card.yaml | 158 ++++++++++++++++++ > 1 file changed, 158 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml > > diff --git a/Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml b/Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml > new file mode 100644 > index 000000000000..4bd590f4ee27 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml > @@ -0,0 +1,158 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright 2022 Samsung Electronics Co. Ltd. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/tesla,fsd-card.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Tesla FSD ASoC sound card driver > + > +maintainers: > + - Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> > + > +description: | > + This binding describes the node properties and essential DT entries of FSD > + SoC sound card node > + > +select: false Never apply this schema. Why? > + > +properties: > + compatible: > + enum: > + - tesla,fsd-sndcard > + > + model: > + description: Describes the Name of the sound card > + $ref: /schemas/types.yaml#/definitions/string > + > + widgets: > + description: A list of DAPM widgets in the sound card. Each entry is a pair > + of strings, the first being the widget name and the second being the > + widget alias > + $ref: /schemas/types.yaml#/definitions/string-array > + > + audio-routing: > + description: A list of the connections between audio components. Each entry > + is a pair of strings, the first being the connection's sink, the second > + being the connection's source > + $ref: /schemas/types.yaml#/definitions/string-array > + > + dai-tdm-slot-num: > + description: Enables TDM mode and specifies the number of TDM slots to be > + enabled > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8] maximum: 8 > + default: 2 > + > + dai-tdm-slot-width: > + description: Specifies the slot width of each TDm slot enabled > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [8, 16, 24] > + default: 16 All the above have types defined. You should not be redefining the types. > + > + dai-link: > + description: Holds the DAI link data between CPU, Codec and Platform > + type: object additionalProperties: false > + properties: > + link-name: > + description: Specifies the name of the DAI link > + $ref: /schemas/types.yaml#/definitions/string > + > + dai-format: > + description: Specifies the serial data format of CPU DAI > + $ref: /schemas/types.yaml#/definitions/string > + > + tesla,bitclock-master: > + description: Specifies the phandle of bitclock master DAI > + $ref: /schemas/types.yaml#/definitions/phandle > + > + tesla,frame-master: > + description: Specifies the phandle of frameclock master DAI > + $ref: /schemas/types.yaml#/definitions/phandle These are common properties. Drop 'tesla'. > + > + cpu: > + description: Holds the CPU DAI node and instance > + type: object additionalProperties: false > + properties: > + sound-dai: > + description: Specifies the phandle of CPU DAI node > + $ref: /schemas/types.yaml#/definitions/phandle-array > + > + required: > + - sound-dai > + > + codec: > + description: Holds the Codec DAI node and instance > + type: object additionalProperties: false > + properties: > + sound-dai: > + description: Specifies the phandle of Codec DAI node > + $ref: /schemas/types.yaml#/definitions/phandle-array Already has a type. Need to define how many entries (maxItems: 1 ?). > + > + required: > + - sound-dai > + > + required: > + - link-name > + - dai-format > + - tesla,bitclock-master > + - tesla,frame-master > + - cpu > + > +dependencies: > + dai-tdm-slot-width: [ 'dai-tdm-slot-num' ] This should be captured with tdm-slot.txt converted to schema. > + > +required: > + - compatible > + - model > + - dai-link > + > +additionalProperties: false > + > +examples: > + - | > + sound { > + compatible = "tesla,fsd-sndcard"; > + status = "disabled"; Why have a disabled example? Other than your example won't pass your schema. > + model = "fsd-i2s"; > + > + primary-dai-link-0 { > + link-name = "fsd-primary-0"; > + dai-format = "i2s"; > + tesla,bitclock-master = <&tdm_0>; > + tesla,frame-master = <&tdm_0>; > + cpu { > + sound-dai = <&tdm_0 0>; > + }; > + }; > + > + secondary-dai-link-0 { > + link-name = "fsd-secondary-0"; > + dai-format = "i2s"; > + tesla,bitclock-master = <&tdm_0>; > + tesla,frame-master = <&tdm_0>; > + cpu { > + sound-dai = <&tdm_0 1>; > + }; > + }; > + > + primary-dai-link-1 { > + link-name = "fsd-primary-1"; > + dai-format = "i2s"; > + tesla,bitclock-master = <&tdm_1>; > + tesla,frame-master = <&tdm_1>; > + cpu { > + sound-dai = <&tdm_1 0>; > + }; > + }; > + > + secondary-dai-link-1 { > + link-name = "fsd-secondary-1"; > + dai-format = "i2s"; > + tesla,bitclock-master = <&tdm_1>; > + tesla,frame-master = <&tdm_1>; > + cpu { > + sound-dai = <&tdm_1 1>; > + }; > + }; > + }; > -- > 2.17.1 > >
> -----Original Message----- > From: Rob Herring [mailto:robh@kernel.org] > Sent: 14 October 2022 08:43 PM > To: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> > Cc: lgirdwood@gmail.com; broonie@kernel.org; > krzysztof.kozlowski+dt@linaro.org; s.nawrocki@samsung.com; > perex@perex.cz; tiwai@suse.com; pankaj.dubey@samsung.com; > alim.akhtar@samsung.com; rcsekar@samsung.com; > aswani.reddy@samsung.com; alsa-devel@alsa-project.org; > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-samsung- > soc@vger.kernel.org > Subject: Re: [PATCH 3/6] dt-bindings: sound: Add sound card bindings for > Tesla FSD > > On Fri, Oct 14, 2022 at 03:51:48PM +0530, Padmanabhan Rajanbabu wrote: > > Add dt-binding reference document to configure the DAI link for Tesla > > FSD sound card driver. > > The simple-card or graph-card bindings don't work for you? Thank you for reviewing the patch. The actual reason for having a custom sound card driver lies in the fact that the Samsung i2s cpu dai requires configuration of some Samsung specific properties like rfs, bfs, codec clock direction and root clock source. We do not have flexibility of configuring the same in simple card driver (sound/soc/generic/simple-card.c) or audio graph card driver (sound/soc/generic/audio-graph-card.c). The binding has been added to support the custom sound card driver. I understand from your query that the newly added card has device tree nodes and properties which are used in simple card as well, but having a different or new prefixes. I believe to address that, we can restructure the string names to generic ones. But I would like to understand, to reuse the simple card or audio graph card bindings, can we add secondary compatible strings in the simple card dt-binding for the custom sound card to probe ? > > > > > Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> > > --- > > .../bindings/sound/tesla,fsd-card.yaml | 158 ++++++++++++++++++ > > 1 file changed, 158 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml > > > > diff --git > > a/Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml > > b/Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml > > new file mode 100644 > > index 000000000000..4bd590f4ee27 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml > > @@ -0,0 +1,158 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright > > +2022 Samsung Electronics Co. Ltd. > > +%YAML 1.2 > > +--- > > +$id: > > +https://protect2.fireeye.com/v1/url?k=4ae54403-157e7d1c-4ae4cf4c- > 000b > > +abdfecba-9eb398ea304f8ae8&q=1&e=4935bed0-ce62-47dd-8faf- > 4750b01e22d3& > > > +u=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fsound%2Ftesla%2Cfsd- > card.ya > > +ml%23 > > +$schema: > > +https://protect2.fireeye.com/v1/url?k=8c72226e-d3e91b71-8c73a921- > 000b > > +abdfecba-3ce999f6c052255b&q=1&e=4935bed0-ce62-47dd-8faf- > 4750b01e22d3& > > +u=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23 > > + > > +title: Tesla FSD ASoC sound card driver > > + > > +maintainers: > > + - Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> > > + > > +description: | > > + This binding describes the node properties and essential DT entries > > +of FSD > > + SoC sound card node > > + > > +select: false > > Never apply this schema. Why? Sorry about it, let me change the select property to true in the next patchset > > > + > > +properties: > > + compatible: > > + enum: > > + - tesla,fsd-sndcard > > + > > + model: > > + description: Describes the Name of the sound card > > + $ref: /schemas/types.yaml#/definitions/string > > + > > + widgets: > > + description: A list of DAPM widgets in the sound card. Each entry is a pair > > + of strings, the first being the widget name and the second being the > > + widget alias > > + $ref: /schemas/types.yaml#/definitions/string-array > > + > > + audio-routing: > > + description: A list of the connections between audio components. Each entry > > + is a pair of strings, the first being the connection's sink, the second > > + being the connection's source > > + $ref: /schemas/types.yaml#/definitions/string-array > > + > > + dai-tdm-slot-num: > > + description: Enables TDM mode and specifies the number of TDM slots to be > > + enabled > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8] > > maximum: 8 Okay > > > + default: 2 > > + > > + dai-tdm-slot-width: > > + description: Specifies the slot width of each TDm slot enabled > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + enum: [8, 16, 24] > > + default: 16 > > All the above have types defined. You should not be redefining the types. Okay > > > + > > + dai-link: > > + description: Holds the DAI link data between CPU, Codec and Platform > > + type: object > > additionalProperties: false okay > > > + properties: > > + link-name: > > + description: Specifies the name of the DAI link > > + $ref: /schemas/types.yaml#/definitions/string > > + > > + dai-format: > > + description: Specifies the serial data format of CPU DAI > > + $ref: /schemas/types.yaml#/definitions/string > > + > > + tesla,bitclock-master: > > + description: Specifies the phandle of bitclock master DAI > > + $ref: /schemas/types.yaml#/definitions/phandle > > + > > + tesla,frame-master: > > + description: Specifies the phandle of frameclock master DAI > > + $ref: /schemas/types.yaml#/definitions/phandle > > These are common properties. Drop 'tesla'. Okay > > > + > > + cpu: > > + description: Holds the CPU DAI node and instance > > + type: object > > additionalProperties: false Okay > > > + properties: > > + sound-dai: > > + description: Specifies the phandle of CPU DAI node > > + $ref: /schemas/types.yaml#/definitions/phandle-array > > + > > + required: > > + - sound-dai > > + > > + codec: > > + description: Holds the Codec DAI node and instance > > + type: object > > additionalProperties: false Okay > > > + properties: > > + sound-dai: > > + description: Specifies the phandle of Codec DAI node > > + $ref: /schemas/types.yaml#/definitions/phandle-array > > Already has a type. Need to define how many entries (maxItems: 1 ?). Okay. I'll update in the upcoming patch set > > > + > > + required: > > + - sound-dai > > + > > + required: > > + - link-name > > + - dai-format > > + - tesla,bitclock-master > > + - tesla,frame-master > > + - cpu > > + > > +dependencies: > > + dai-tdm-slot-width: [ 'dai-tdm-slot-num' ] > > This should be captured with tdm-slot.txt converted to schema. Okay > > > + > > +required: > > + - compatible > > + - model > > + - dai-link > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + sound { > > + compatible = "tesla,fsd-sndcard"; > > + status = "disabled"; > > Why have a disabled example? Other than your example won't pass your > schema. Thanks for noticing, I'll double check and change the example keeping the status as enabled > > > + model = "fsd-i2s"; > > + > > + primary-dai-link-0 { > > + link-name = "fsd-primary-0"; > > + dai-format = "i2s"; > > + tesla,bitclock-master = <&tdm_0>; > > + tesla,frame-master = <&tdm_0>; > > + cpu { > > + sound-dai = <&tdm_0 0>; > > + }; > > + }; > > + > > + secondary-dai-link-0 { > > + link-name = "fsd-secondary-0"; > > + dai-format = "i2s"; > > + tesla,bitclock-master = <&tdm_0>; > > + tesla,frame-master = <&tdm_0>; > > + cpu { > > + sound-dai = <&tdm_0 1>; > > + }; > > + }; > > + > > + primary-dai-link-1 { > > + link-name = "fsd-primary-1"; > > + dai-format = "i2s"; > > + tesla,bitclock-master = <&tdm_1>; > > + tesla,frame-master = <&tdm_1>; > > + cpu { > > + sound-dai = <&tdm_1 0>; > > + }; > > + }; > > + > > + secondary-dai-link-1 { > > + link-name = "fsd-secondary-1"; > > + dai-format = "i2s"; > > + tesla,bitclock-master = <&tdm_1>; > > + tesla,frame-master = <&tdm_1>; > > + cpu { > > + sound-dai = <&tdm_1 1>; > > + }; > > + }; > > + }; > > -- > > 2.17.1 > > > >
On 21/10/2022 04:44, Padmanabhan Rajanbabu wrote: >> On Fri, Oct 14, 2022 at 03:51:48PM +0530, Padmanabhan Rajanbabu wrote: >>> Add dt-binding reference document to configure the DAI link for Tesla >>> FSD sound card driver. >> >> The simple-card or graph-card bindings don't work for you? > Thank you for reviewing the patch. > > The actual reason for having a custom sound card driver lies in the fact > that the Samsung i2s cpu dai requires configuration of some Samsung > specific properties like rfs, bfs, codec clock direction and root clock > source. We do not have flexibility of configuring the same in simple card > driver (sound/soc/generic/simple-card.c) or audio graph card driver > (sound/soc/generic/audio-graph-card.c). The binding has been added to > support the custom sound card driver. > > I understand from your query that the newly added card has device tree > nodes and properties which are used in simple card as well, but having a > different or new prefixes. I believe to address that, we can restructure > the string names to generic ones. You must use generic, existing properties where applicable. > But I would like to understand, to reuse > the simple card or audio graph card bindings, can we add secondary > compatible strings in the simple card dt-binding for the custom sound card > to probe ? If you see other vendor compatibles there, then yes... But there aren't any, right? >> >>> >>> Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> >>> --- >>> .../bindings/sound/tesla,fsd-card.yaml | 158 ++++++++++++++++++ >>> 1 file changed, 158 insertions(+) >>> create mode 100644 >>> Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml >>> >>> diff --git >>> a/Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml >>> b/Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml >>> new file mode 100644 >>> index 000000000000..4bd590f4ee27 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml >>> @@ -0,0 +1,158 @@ >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright >>> +2022 Samsung Electronics Co. Ltd. >>> +%YAML 1.2 >>> +--- >>> +$id: >>> +https://protect2.fireeye.com/v1/url?k=4ae54403-157e7d1c-4ae4cf4c- >> 000b >>> +abdfecba-9eb398ea304f8ae8&q=1&e=4935bed0-ce62-47dd-8faf- >> 4750b01e22d3& >>> >> +u=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fsound%2Ftesla%2Cfsd- >> card.ya >>> +ml%23 >>> +$schema: >>> +https://protect2.fireeye.com/v1/url?k=8c72226e-d3e91b71-8c73a921- >> 000b >>> +abdfecba-3ce999f6c052255b&q=1&e=4935bed0-ce62-47dd-8faf- >> 4750b01e22d3& >>> +u=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23 >>> + >>> +title: Tesla FSD ASoC sound card driver >>> + >>> +maintainers: >>> + - Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> >>> + >>> +description: | >>> + This binding describes the node properties and essential DT entries >>> +of FSD >>> + SoC sound card node >>> + >>> +select: false >> >> Never apply this schema. Why? > Sorry about it, let me change the select property to true in the next > patchset No, just drop it. Look at other bindings or at example-schema >> >>> + >>> +properties: >>> + compatible: >>> + enum: >>> + - tesla,fsd-sndcard >>> + >>> + model: >>> + description: Describes the Name of the sound card >>> + $ref: /schemas/types.yaml#/definitions/string >>> + >>> + widgets: >>> + description: A list of DAPM widgets in the sound card. Each entry > is a pair >>> + of strings, the first being the widget name and the second being > the >>> + widget alias >>> + $ref: /schemas/types.yaml#/definitions/string-array >>> + >>> + audio-routing: >>> + description: A list of the connections between audio components. > Each entry >>> + is a pair of strings, the first being the connection's sink, the > second >>> + being the connection's source >>> + $ref: /schemas/types.yaml#/definitions/string-array >>> + >>> + dai-tdm-slot-num: >>> + description: Enables TDM mode and specifies the number of TDM slots > to be >>> + enabled >>> + $ref: /schemas/types.yaml#/definitions/uint32 >>> + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8] >> >> maximum: 8 > Okay >> >>> + default: 2 >>> + >>> + dai-tdm-slot-width: >>> + description: Specifies the slot width of each TDm slot enabled >>> + $ref: /schemas/types.yaml#/definitions/uint32 >>> + enum: [8, 16, 24] >>> + default: 16 >> >> All the above have types defined. You should not be redefining the types. > Okay >> >>> + >>> + dai-link: >>> + description: Holds the DAI link data between CPU, Codec and > Platform >>> + type: object >> >> additionalProperties: false > okay >> >>> + properties: >>> + link-name: >>> + description: Specifies the name of the DAI link >>> + $ref: /schemas/types.yaml#/definitions/string >>> + >>> + dai-format: >>> + description: Specifies the serial data format of CPU DAI >>> + $ref: /schemas/types.yaml#/definitions/string >>> + >>> + tesla,bitclock-master: >>> + description: Specifies the phandle of bitclock master DAI >>> + $ref: /schemas/types.yaml#/definitions/phandle >>> + >>> + tesla,frame-master: >>> + description: Specifies the phandle of frameclock master DAI >>> + $ref: /schemas/types.yaml#/definitions/phandle >> >> These are common properties. Drop 'tesla'. > Okay >> >>> + >>> + cpu: >>> + description: Holds the CPU DAI node and instance >>> + type: object >> >> additionalProperties: false > Okay >> >>> + properties: >>> + sound-dai: >>> + description: Specifies the phandle of CPU DAI node >>> + $ref: /schemas/types.yaml#/definitions/phandle-array >>> + >>> + required: >>> + - sound-dai >>> + >>> + codec: >>> + description: Holds the Codec DAI node and instance >>> + type: object >> >> additionalProperties: false > Okay >> >>> + properties: >>> + sound-dai: >>> + description: Specifies the phandle of Codec DAI node >>> + $ref: /schemas/types.yaml#/definitions/phandle-array >> >> Already has a type. Need to define how many entries (maxItems: 1 ?). > Okay. I'll update in the upcoming patch set >> >>> + >>> + required: >>> + - sound-dai >>> + >>> + required: >>> + - link-name >>> + - dai-format >>> + - tesla,bitclock-master >>> + - tesla,frame-master >>> + - cpu >>> + >>> +dependencies: >>> + dai-tdm-slot-width: [ 'dai-tdm-slot-num' ] >> >> This should be captured with tdm-slot.txt converted to schema. > Okay >> >>> + >>> +required: >>> + - compatible >>> + - model >>> + - dai-link >>> + >>> +additionalProperties: false >>> + >>> +examples: >>> + - | >>> + sound { >>> + compatible = "tesla,fsd-sndcard"; >>> + status = "disabled"; >> >> Why have a disabled example? Other than your example won't pass your >> schema. > Thanks for noticing, I'll double check and change the example keeping the > status > as enabled No, just drop. Start with example-schema instead. Best regards, Krzysztof
> -----Original Message----- > From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@linaro.org] > Sent: 22 October 2022 10:19 PM > To: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>; 'Rob Herring' > <robh@kernel.org> > Cc: lgirdwood@gmail.com; broonie@kernel.org; > krzysztof.kozlowski+dt@linaro.org; s.nawrocki@samsung.com; > perex@perex.cz; tiwai@suse.com; pankaj.dubey@samsung.com; > alim.akhtar@samsung.com; rcsekar@samsung.com; > aswani.reddy@samsung.com; alsa-devel@alsa-project.org; > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-samsung- > soc@vger.kernel.org > Subject: Re: [PATCH 3/6] dt-bindings: sound: Add sound card bindings for > Tesla FSD > > On 21/10/2022 04:44, Padmanabhan Rajanbabu wrote: > >> On Fri, Oct 14, 2022 at 03:51:48PM +0530, Padmanabhan Rajanbabu wrote: > >>> Add dt-binding reference document to configure the DAI link for > >>> Tesla FSD sound card driver. > >> > >> The simple-card or graph-card bindings don't work for you? > > Thank you for reviewing the patch. > > > > The actual reason for having a custom sound card driver lies in the > > fact that the Samsung i2s cpu dai requires configuration of some > > Samsung specific properties like rfs, bfs, codec clock direction and > > root clock source. We do not have flexibility of configuring the same > > in simple card driver (sound/soc/generic/simple-card.c) or audio graph > > card driver (sound/soc/generic/audio-graph-card.c). The binding has > > been added to support the custom sound card driver. > > > > I understand from your query that the newly added card has device tree > > nodes and properties which are used in simple card as well, but having > > a different or new prefixes. I believe to address that, we can > > restructure the string names to generic ones. > > You must use generic, existing properties where applicable. Okay > > > But I would like to understand, to reuse the simple card or audio > > graph card bindings, can we add secondary compatible strings in the > > simple card dt-binding for the custom sound card to probe ? > > If you see other vendor compatibles there, then yes... But there aren't any, > right? Yes you are right, we don't see other vendor compatibles. But, am I allowed to add such secondary compatibles so that we can extend the simple card and its utilities to a large extent? If no, then I believe we will need a separate binding to extend the generic properties. > > >> > >>> > >>> Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> > >>> --- > >>> .../bindings/sound/tesla,fsd-card.yaml | 158 ++++++++++++++++++ > >>> 1 file changed, 158 insertions(+) > >>> create mode 100644 > >>> Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml > >>> > >>> diff --git > >>> a/Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml > >>> b/Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml > >>> new file mode 100644 > >>> index 000000000000..4bd590f4ee27 > >>> --- /dev/null > >>> +++ b/Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml > >>> @@ -0,0 +1,158 @@ > >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # > >>> +Copyright > >>> +2022 Samsung Electronics Co. Ltd. > >>> +%YAML 1.2 > >>> +--- > >>> +$id: > >>> +https://protect2.fireeye.com/v1/url?k=4ae54403-157e7d1c-4ae4cf4c- > >> 000b > >>> +abdfecba-9eb398ea304f8ae8&q=1&e=4935bed0-ce62-47dd-8faf- > >> 4750b01e22d3& > >>> > >> > +u=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fsound%2Ftesla%2Cfsd- > >> card.ya > >>> +ml%23 > >>> +$schema: > >>> +https://protect2.fireeye.com/v1/url?k=8c72226e-d3e91b71-8c73a921- > >> 000b > >>> +abdfecba-3ce999f6c052255b&q=1&e=4935bed0-ce62-47dd-8faf- > >> 4750b01e22d3& > >>> +u=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23 > >>> + > >>> +title: Tesla FSD ASoC sound card driver > >>> + > >>> +maintainers: > >>> + - Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> > >>> + > >>> +description: | > >>> + This binding describes the node properties and essential DT > >>> +entries of FSD > >>> + SoC sound card node > >>> + > >>> +select: false > >> > >> Never apply this schema. Why? > > Sorry about it, let me change the select property to true in the next > > patchset > > No, just drop it. Look at other bindings or at example-schema > > >> > >>> + > >>> +properties: > >>> + compatible: > >>> + enum: > >>> + - tesla,fsd-sndcard > >>> + > >>> + model: > >>> + description: Describes the Name of the sound card > >>> + $ref: /schemas/types.yaml#/definitions/string > >>> + > >>> + widgets: > >>> + description: A list of DAPM widgets in the sound card. Each > >>> + entry > > is a pair > >>> + of strings, the first being the widget name and the second > >>> + being > > the > >>> + widget alias > >>> + $ref: /schemas/types.yaml#/definitions/string-array > >>> + > >>> + audio-routing: > >>> + description: A list of the connections between audio components. > > Each entry > >>> + is a pair of strings, the first being the connection's sink, > >>> + the > > second > >>> + being the connection's source > >>> + $ref: /schemas/types.yaml#/definitions/string-array > >>> + > >>> + dai-tdm-slot-num: > >>> + description: Enables TDM mode and specifies the number of TDM > >>> + slots > > to be > >>> + enabled > >>> + $ref: /schemas/types.yaml#/definitions/uint32 > >>> + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8] > >> > >> maximum: 8 > > Okay > >> > >>> + default: 2 > >>> + > >>> + dai-tdm-slot-width: > >>> + description: Specifies the slot width of each TDm slot enabled > >>> + $ref: /schemas/types.yaml#/definitions/uint32 > >>> + enum: [8, 16, 24] > >>> + default: 16 > >> > >> All the above have types defined. You should not be redefining the types. > > Okay > >> > >>> + > >>> + dai-link: > >>> + description: Holds the DAI link data between CPU, Codec and > > Platform > >>> + type: object > >> > >> additionalProperties: false > > okay > >> > >>> + properties: > >>> + link-name: > >>> + description: Specifies the name of the DAI link > >>> + $ref: /schemas/types.yaml#/definitions/string > >>> + > >>> + dai-format: > >>> + description: Specifies the serial data format of CPU DAI > >>> + $ref: /schemas/types.yaml#/definitions/string > >>> + > >>> + tesla,bitclock-master: > >>> + description: Specifies the phandle of bitclock master DAI > >>> + $ref: /schemas/types.yaml#/definitions/phandle > >>> + > >>> + tesla,frame-master: > >>> + description: Specifies the phandle of frameclock master DAI > >>> + $ref: /schemas/types.yaml#/definitions/phandle > >> > >> These are common properties. Drop 'tesla'. > > Okay > >> > >>> + > >>> + cpu: > >>> + description: Holds the CPU DAI node and instance > >>> + type: object > >> > >> additionalProperties: false > > Okay > >> > >>> + properties: > >>> + sound-dai: > >>> + description: Specifies the phandle of CPU DAI node > >>> + $ref: /schemas/types.yaml#/definitions/phandle-array > >>> + > >>> + required: > >>> + - sound-dai > >>> + > >>> + codec: > >>> + description: Holds the Codec DAI node and instance > >>> + type: object > >> > >> additionalProperties: false > > Okay > >> > >>> + properties: > >>> + sound-dai: > >>> + description: Specifies the phandle of Codec DAI node > >>> + $ref: /schemas/types.yaml#/definitions/phandle-array > >> > >> Already has a type. Need to define how many entries (maxItems: 1 ?). > > Okay. I'll update in the upcoming patch set > >> > >>> + > >>> + required: > >>> + - sound-dai > >>> + > >>> + required: > >>> + - link-name > >>> + - dai-format > >>> + - tesla,bitclock-master > >>> + - tesla,frame-master > >>> + - cpu > >>> + > >>> +dependencies: > >>> + dai-tdm-slot-width: [ 'dai-tdm-slot-num' ] > >> > >> This should be captured with tdm-slot.txt converted to schema. > > Okay > >> > >>> + > >>> +required: > >>> + - compatible > >>> + - model > >>> + - dai-link > >>> + > >>> +additionalProperties: false > >>> + > >>> +examples: > >>> + - | > >>> + sound { > >>> + compatible = "tesla,fsd-sndcard"; > >>> + status = "disabled"; > >> > >> Why have a disabled example? Other than your example won't pass your > >> schema. > > Thanks for noticing, I'll double check and change the example keeping > > the status as enabled > > No, just drop. Start with example-schema instead. > > Best regards, > Krzysztof
On 08/11/2022 06:33, Padmanabhan Rajanbabu wrote: >>> >>> The actual reason for having a custom sound card driver lies in the >>> fact that the Samsung i2s cpu dai requires configuration of some >>> Samsung specific properties like rfs, bfs, codec clock direction and >>> root clock source. We do not have flexibility of configuring the same >>> in simple card driver (sound/soc/generic/simple-card.c) or audio graph >>> card driver (sound/soc/generic/audio-graph-card.c). The binding has >>> been added to support the custom sound card driver. >>> >>> I understand from your query that the newly added card has device tree >>> nodes and properties which are used in simple card as well, but having >>> a different or new prefixes. I believe to address that, we can >>> restructure the string names to generic ones. >> >> You must use generic, existing properties where applicable. > > Okay > >> >>> But I would like to understand, to reuse the simple card or audio >>> graph card bindings, can we add secondary compatible strings in the >>> simple card dt-binding for the custom sound card to probe ? >> >> If you see other vendor compatibles there, then yes... But there aren't any, >> right? > > Yes you are right, we don't see other vendor compatibles. But, am I allowed > to add such secondary compatibles so that we can extend the simple card > and its utilities to a large extent? > > If no, then I believe we will need a separate binding to extend the generic > properties. If you have any custom properties, then yes. But you don't have. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml b/Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml new file mode 100644 index 000000000000..4bd590f4ee27 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2022 Samsung Electronics Co. Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/tesla,fsd-card.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tesla FSD ASoC sound card driver + +maintainers: + - Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> + +description: | + This binding describes the node properties and essential DT entries of FSD + SoC sound card node + +select: false + +properties: + compatible: + enum: + - tesla,fsd-sndcard + + model: + description: Describes the Name of the sound card + $ref: /schemas/types.yaml#/definitions/string + + widgets: + description: A list of DAPM widgets in the sound card. Each entry is a pair + of strings, the first being the widget name and the second being the + widget alias + $ref: /schemas/types.yaml#/definitions/string-array + + audio-routing: + description: A list of the connections between audio components. Each entry + is a pair of strings, the first being the connection's sink, the second + being the connection's source + $ref: /schemas/types.yaml#/definitions/string-array + + dai-tdm-slot-num: + description: Enables TDM mode and specifies the number of TDM slots to be + enabled + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8] + default: 2 + + dai-tdm-slot-width: + description: Specifies the slot width of each TDm slot enabled + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16, 24] + default: 16 + + dai-link: + description: Holds the DAI link data between CPU, Codec and Platform + type: object + properties: + link-name: + description: Specifies the name of the DAI link + $ref: /schemas/types.yaml#/definitions/string + + dai-format: + description: Specifies the serial data format of CPU DAI + $ref: /schemas/types.yaml#/definitions/string + + tesla,bitclock-master: + description: Specifies the phandle of bitclock master DAI + $ref: /schemas/types.yaml#/definitions/phandle + + tesla,frame-master: + description: Specifies the phandle of frameclock master DAI + $ref: /schemas/types.yaml#/definitions/phandle + + cpu: + description: Holds the CPU DAI node and instance + type: object + properties: + sound-dai: + description: Specifies the phandle of CPU DAI node + $ref: /schemas/types.yaml#/definitions/phandle-array + + required: + - sound-dai + + codec: + description: Holds the Codec DAI node and instance + type: object + properties: + sound-dai: + description: Specifies the phandle of Codec DAI node + $ref: /schemas/types.yaml#/definitions/phandle-array + + required: + - sound-dai + + required: + - link-name + - dai-format + - tesla,bitclock-master + - tesla,frame-master + - cpu + +dependencies: + dai-tdm-slot-width: [ 'dai-tdm-slot-num' ] + +required: + - compatible + - model + - dai-link + +additionalProperties: false + +examples: + - | + sound { + compatible = "tesla,fsd-sndcard"; + status = "disabled"; + model = "fsd-i2s"; + + primary-dai-link-0 { + link-name = "fsd-primary-0"; + dai-format = "i2s"; + tesla,bitclock-master = <&tdm_0>; + tesla,frame-master = <&tdm_0>; + cpu { + sound-dai = <&tdm_0 0>; + }; + }; + + secondary-dai-link-0 { + link-name = "fsd-secondary-0"; + dai-format = "i2s"; + tesla,bitclock-master = <&tdm_0>; + tesla,frame-master = <&tdm_0>; + cpu { + sound-dai = <&tdm_0 1>; + }; + }; + + primary-dai-link-1 { + link-name = "fsd-primary-1"; + dai-format = "i2s"; + tesla,bitclock-master = <&tdm_1>; + tesla,frame-master = <&tdm_1>; + cpu { + sound-dai = <&tdm_1 0>; + }; + }; + + secondary-dai-link-1 { + link-name = "fsd-secondary-1"; + dai-format = "i2s"; + tesla,bitclock-master = <&tdm_1>; + tesla,frame-master = <&tdm_1>; + cpu { + sound-dai = <&tdm_1 1>; + }; + }; + };
Add dt-binding reference document to configure the DAI link for Tesla FSD sound card driver. Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> --- .../bindings/sound/tesla,fsd-card.yaml | 158 ++++++++++++++++++ 1 file changed, 158 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml