diff mbox series

arm64: dts: imx8mm: Rename /watchdog-gpio to plain /watchdog

Message ID 20221102191756.120750-1-marex@denx.de (mailing list archive)
State New, archived
Headers show
Series arm64: dts: imx8mm: Rename /watchdog-gpio to plain /watchdog | expand

Commit Message

Marek Vasut Nov. 2, 2022, 7:17 p.m. UTC
The DT bindings checker is confused by the -gpio node suffix,
drop it to fix the following warning:
"
imx8mm-data-modul-edm-sbc.dtb: /: watchdog-gpio: {'pinctrl-names': ['default'], 'pinctrl-0': [[104]], 'compatible': ['linux,wdt-gpio'], 'always-enabled': True, 'gpios': [[45, 8, 0]], 'hw_algo': ['level'], 'hw_margin_ms': [[1500]], 'status': ['disabled']} is not of type 'array'
"

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org
---
 arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Shawn Guo Nov. 11, 2022, 5:51 a.m. UTC | #1
On Wed, Nov 02, 2022 at 08:17:56PM +0100, Marek Vasut wrote:
> The DT bindings checker is confused by the -gpio node suffix,
> drop it to fix the following warning:
> "
> imx8mm-data-modul-edm-sbc.dtb: /: watchdog-gpio: {'pinctrl-names': ['default'], 'pinctrl-0': [[104]], 'compatible': ['linux,wdt-gpio'], 'always-enabled': True, 'gpios': [[45, 8, 0]], 'hw_algo': ['level'], 'hw_margin_ms': [[1500]], 'status': ['disabled']} is not of type 'array'
> "
> 
> Signed-off-by: Marek Vasut <marex@denx.de>

Changed the subject prefix to "arm64: dts: imx8mm-data-modul: " to make
it a bit more board specific.

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
index 575d5632296c5..7764ddca97006 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
@@ -90,7 +90,7 @@  reg_usdhc2_vcc: regulator-usdhc2-vcc {
 		enable-active-high;
 	};
 
-	watchdog-gpio {
+	watchdog {
 		/* TPS3813 */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_watchdog_gpio>;