diff mbox series

[04/22] phy: qcom-qmp-combo: rename PHY ops structures

Message ID 20221111085643.9478-5-johan+linaro@kernel.org
State Superseded
Headers show
Series phy: qcom-qmp-combo: preparatory cleanups (set 2/3) | expand

Commit Message

Johan Hovold Nov. 11, 2022, 8:56 a.m. UTC 
Rename the PHY operation structures so that they have a "phy_ops" suffix
and move them next to the implementation.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 40 +++++++++++------------
 1 file changed, 20 insertions(+), 20 deletions(-)

Comments

Dmitry Baryshkov Nov. 12, 2022, 6:19 a.m. UTC | #1 
On 11/11/2022 11:56, Johan Hovold wrote:
> Rename the PHY operation structures so that they have a "phy_ops" suffix
> and move them next to the implementation.
> 
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
>   drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 40 +++++++++++------------
>   1 file changed, 20 insertions(+), 20 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 2ac29b71d3b7..13800c2243e1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2118,6 +2118,24 @@  static int qmp_combo_set_mode(struct phy *phy, enum phy_mode mode, int submode)
 	return 0;
 }
 
+static const struct phy_ops qmp_combo_usb_phy_ops = {
+	.init		= qmp_combo_enable,
+	.exit		= qmp_combo_disable,
+	.set_mode	= qmp_combo_set_mode,
+	.owner		= THIS_MODULE,
+};
+
+static const struct phy_ops qmp_combo_dp_phy_ops = {
+	.init		= qmp_combo_init,
+	.configure	= qcom_qmp_dp_phy_configure,
+	.power_on	= qmp_combo_power_on,
+	.calibrate	= qcom_qmp_dp_phy_calibrate,
+	.power_off	= qmp_combo_power_off,
+	.exit		= qmp_combo_exit,
+	.set_mode	= qmp_combo_set_mode,
+	.owner		= THIS_MODULE,
+};
+
 static void qmp_combo_enable_autonomous_mode(struct qmp_phy *qphy)
 {
 	const struct qmp_phy_cfg *cfg = qphy->cfg;
@@ -2542,24 +2560,6 @@  static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
 	return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
 }
 
-static const struct phy_ops qmp_combo_usb_ops = {
-	.init		= qmp_combo_enable,
-	.exit		= qmp_combo_disable,
-	.set_mode	= qmp_combo_set_mode,
-	.owner		= THIS_MODULE,
-};
-
-static const struct phy_ops qmp_combo_dp_ops = {
-	.init		= qmp_combo_init,
-	.configure	= qcom_qmp_dp_phy_configure,
-	.power_on	= qmp_combo_power_on,
-	.calibrate	= qcom_qmp_dp_phy_calibrate,
-	.power_off	= qmp_combo_power_off,
-	.exit		= qmp_combo_exit,
-	.set_mode	= qmp_combo_set_mode,
-	.owner		= THIS_MODULE,
-};
-
 static int qmp_combo_create(struct device *dev, struct device_node *np, int id,
 			void __iomem *serdes, const struct qmp_phy_cfg *cfg)
 {
@@ -2632,9 +2632,9 @@  static int qmp_combo_create(struct device *dev, struct device_node *np, int id,
 	}
 
 	if (cfg->type == PHY_TYPE_DP)
-		ops = &qmp_combo_dp_ops;
+		ops = &qmp_combo_dp_phy_ops;
 	else
-		ops = &qmp_combo_usb_ops;
+		ops = &qmp_combo_usb_phy_ops;
 
 	generic_phy = devm_phy_create(dev, np, ops);
 	if (IS_ERR(generic_phy)) {