diff mbox series

[v3,03/11] phy: sun4i-usb: add support for the USB PHY on F1C100s SoC

Message ID 20221106154826.6687-4-andre.przywara@arm.com (mailing list archive)
State New, archived
Headers show
Series ARM: suniv: USB and PopStick board support | expand

Commit Message

Andre Przywara Nov. 6, 2022, 3:48 p.m. UTC
From: Icenowy Zheng <uwu@icenowy.me>

The F1C100s SoC has one USB OTG port connected to a MUSB controller.

Add support for its USB PHY.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/phy/allwinner/phy-sun4i-usb.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Jernej Škrabec Nov. 7, 2022, 5:18 p.m. UTC | #1
Dne nedelja, 06. november 2022 ob 16:48:18 CET je Andre Przywara napisal(a):
> From: Icenowy Zheng <uwu@icenowy.me>
> 
> The F1C100s SoC has one USB OTG port connected to a MUSB controller.
> 
> Add support for its USB PHY.
> 
> Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej
Jernej Škrabec Nov. 15, 2022, 6:01 a.m. UTC | #2
Dne četrtek, 10. november 2022 ob 08:35:39 CET je Vinod Koul napisal(a):
> On 06-11-22, 15:48, Andre Przywara wrote:
> > From: Icenowy Zheng <uwu@icenowy.me>
> > 
> > The F1C100s SoC has one USB OTG port connected to a MUSB controller.
> > 
> > Add support for its USB PHY.
> 
> This does not apply for me, please rebase and resend
> 
> Also, consider splitting phy patches from this. I dont think there is
> any dependency

DT patches in this series depend on functionality added here.

Best regards,
Jernej
Krzysztof Kozlowski Nov. 15, 2022, 10:03 a.m. UTC | #3
On 15/11/2022 07:01, Jernej Škrabec wrote:
> Dne četrtek, 10. november 2022 ob 08:35:39 CET je Vinod Koul napisal(a):
>> On 06-11-22, 15:48, Andre Przywara wrote:
>>> From: Icenowy Zheng <uwu@icenowy.me>
>>>
>>> The F1C100s SoC has one USB OTG port connected to a MUSB controller.
>>>
>>> Add support for its USB PHY.
>>
>> This does not apply for me, please rebase and resend
>>
>> Also, consider splitting phy patches from this. I dont think there is
>> any dependency
> 
> DT patches in this series depend on functionality added here.
> 

DTS always goes separately from driver changes because it is a hardware
description. Depending on driver means you have potential ABI break, so
it is already a warning sign.

Best regards,
Krzysztof
Andre Przywara Nov. 15, 2022, 10:44 a.m. UTC | #4
On Tue, 15 Nov 2022 11:03:24 +0100
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

Hi,

> On 15/11/2022 07:01, Jernej Škrabec wrote:
> > Dne četrtek, 10. november 2022 ob 08:35:39 CET je Vinod Koul napisal(a):  
> >> On 06-11-22, 15:48, Andre Przywara wrote:  
> >>> From: Icenowy Zheng <uwu@icenowy.me>
> >>>
> >>> The F1C100s SoC has one USB OTG port connected to a MUSB controller.
> >>>
> >>> Add support for its USB PHY.  
> >>
> >> This does not apply for me, please rebase and resend
> >>
> >> Also, consider splitting phy patches from this. I dont think there is
> >> any dependency  
> > 
> > DT patches in this series depend on functionality added here.
> >   
> 
> DTS always goes separately from driver changes because it is a hardware
> description. Depending on driver means you have potential ABI break, so
> it is already a warning sign.

We understand that ;-)
What Jernej meant was that the DTS patches at the end depend on patch
01/10, which adds to the PHY binding doc. I am not sure if Vinod's
suggestion was about splitting off 01/10, 03/10, and 10/10, or just the
two latter which touch the driver.

I can split off 03/10 and 10/10, rebased on top of linux-phy.git/next, and
send that to Vinod.
Then I would keep 01/10 in a respin of this series here, to satisfy the
dependency of the later DTS patches, and Vinod can pick that one patch from
there?

Cheers,
Andre
Krzysztof Kozlowski Nov. 15, 2022, 3 p.m. UTC | #5
On 15/11/2022 11:44, Andre Przywara wrote:
> On Tue, 15 Nov 2022 11:03:24 +0100
> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> 
> Hi,
> 
>> On 15/11/2022 07:01, Jernej Škrabec wrote:
>>> Dne četrtek, 10. november 2022 ob 08:35:39 CET je Vinod Koul napisal(a):  
>>>> On 06-11-22, 15:48, Andre Przywara wrote:  
>>>>> From: Icenowy Zheng <uwu@icenowy.me>
>>>>>
>>>>> The F1C100s SoC has one USB OTG port connected to a MUSB controller.
>>>>>
>>>>> Add support for its USB PHY.  
>>>>
>>>> This does not apply for me, please rebase and resend
>>>>
>>>> Also, consider splitting phy patches from this. I dont think there is
>>>> any dependency  
>>>
>>> DT patches in this series depend on functionality added here.
>>>   
>>
>> DTS always goes separately from driver changes because it is a hardware
>> description. Depending on driver means you have potential ABI break, so
>> it is already a warning sign.
> 
> We understand that ;-)
> What Jernej meant was that the DTS patches at the end depend on patch
> 01/10, which adds to the PHY binding doc. I am not sure if Vinod's
> suggestion was about splitting off 01/10, 03/10, and 10/10, or just the
> two latter which touch the driver.
> 
> I can split off 03/10 and 10/10, rebased on top of linux-phy.git/next, and
> send that to Vinod.
> Then I would keep 01/10 in a respin of this series here, to satisfy the
> dependency of the later DTS patches, and Vinod can pick that one patch from
> there?

There is no hard dependency of DTS on bindings. You can split these (and
some maintainers prefer that way) and in DTS patches just provide the
link to the bindings, saying it is in progress.

The bindings should be however kept with driver changes as it goes the
same way.

Best regards,
Krzysztof
Andre Przywara Nov. 15, 2022, 4:19 p.m. UTC | #6
On Tue, 15 Nov 2022 16:00:54 +0100
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

Hi,

> On 15/11/2022 11:44, Andre Przywara wrote:
> > On Tue, 15 Nov 2022 11:03:24 +0100
> > Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> > 
> > Hi,
> >   
> >> On 15/11/2022 07:01, Jernej Škrabec wrote:  
> >>> Dne četrtek, 10. november 2022 ob 08:35:39 CET je Vinod Koul napisal(a):    
> >>>> On 06-11-22, 15:48, Andre Przywara wrote:    
> >>>>> From: Icenowy Zheng <uwu@icenowy.me>
> >>>>>
> >>>>> The F1C100s SoC has one USB OTG port connected to a MUSB controller.
> >>>>>
> >>>>> Add support for its USB PHY.    
> >>>>
> >>>> This does not apply for me, please rebase and resend
> >>>>
> >>>> Also, consider splitting phy patches from this. I dont think there is
> >>>> any dependency    
> >>>
> >>> DT patches in this series depend on functionality added here.
> >>>     
> >>
> >> DTS always goes separately from driver changes because it is a hardware
> >> description. Depending on driver means you have potential ABI break, so
> >> it is already a warning sign.  
> > 
> > We understand that ;-)
> > What Jernej meant was that the DTS patches at the end depend on patch
> > 01/10, which adds to the PHY binding doc. I am not sure if Vinod's
> > suggestion was about splitting off 01/10, 03/10, and 10/10, or just the
> > two latter which touch the driver.
> > 
> > I can split off 03/10 and 10/10, rebased on top of linux-phy.git/next, and
> > send that to Vinod.
> > Then I would keep 01/10 in a respin of this series here, to satisfy the
> > dependency of the later DTS patches, and Vinod can pick that one patch from
> > there?  
> 
> There is no hard dependency of DTS on bindings. You can split these (and
> some maintainers prefer that way) and in DTS patches just provide the
> link to the bindings, saying it is in progress.

But that breaks "make dtbs_check", doesn't it?

I would think that the DT bits - bindings first, then DTS files using it -
should be bundled. This is how I imagine the future(TM), where DTs and
bindings live outside the kernel repo.

> The bindings should be however kept with driver changes as it goes the
> same way.

I understand that the bindings describe the contract the driver acts on,
but going forward I think driver changes would need to come later, then
(since they will live in a separate repo at some day)?
Maybe pointing to the binding changes in progress?

So with a separate repo we would actually need to upstream just the
bindings first, then could push driver changes and .dts files
independently?

And for now it looks like we are stuck with putting everything in one
series, to make both checkpatch and dtbs_check happy.

Cheers,
Andre
Krzysztof Kozlowski Nov. 15, 2022, 4:29 p.m. UTC | #7
On 15/11/2022 17:19, Andre Przywara wrote:
> On Tue, 15 Nov 2022 16:00:54 +0100
> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> 
> Hi,
> 
>> On 15/11/2022 11:44, Andre Przywara wrote:
>>> On Tue, 15 Nov 2022 11:03:24 +0100
>>> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
>>>
>>> Hi,
>>>   
>>>> On 15/11/2022 07:01, Jernej Škrabec wrote:  
>>>>> Dne četrtek, 10. november 2022 ob 08:35:39 CET je Vinod Koul napisal(a):    
>>>>>> On 06-11-22, 15:48, Andre Przywara wrote:    
>>>>>>> From: Icenowy Zheng <uwu@icenowy.me>
>>>>>>>
>>>>>>> The F1C100s SoC has one USB OTG port connected to a MUSB controller.
>>>>>>>
>>>>>>> Add support for its USB PHY.    
>>>>>>
>>>>>> This does not apply for me, please rebase and resend
>>>>>>
>>>>>> Also, consider splitting phy patches from this. I dont think there is
>>>>>> any dependency    
>>>>>
>>>>> DT patches in this series depend on functionality added here.
>>>>>     
>>>>
>>>> DTS always goes separately from driver changes because it is a hardware
>>>> description. Depending on driver means you have potential ABI break, so
>>>> it is already a warning sign.  
>>>
>>> We understand that ;-)
>>> What Jernej meant was that the DTS patches at the end depend on patch
>>> 01/10, which adds to the PHY binding doc. I am not sure if Vinod's
>>> suggestion was about splitting off 01/10, 03/10, and 10/10, or just the
>>> two latter which touch the driver.
>>>
>>> I can split off 03/10 and 10/10, rebased on top of linux-phy.git/next, and
>>> send that to Vinod.
>>> Then I would keep 01/10 in a respin of this series here, to satisfy the
>>> dependency of the later DTS patches, and Vinod can pick that one patch from
>>> there?  
>>
>> There is no hard dependency of DTS on bindings. You can split these (and
>> some maintainers prefer that way) and in DTS patches just provide the
>> link to the bindings, saying it is in progress.
> 
> But that breaks "make dtbs_check", doesn't it?

The check will be broken anyway because binding goes via driver
subsystem and DTS goes via arm-soc.

If both make to the linux-next and next release, then it's not a problem.

> 
> I would think that the DT bits - bindings first, then DTS files using it -
> should be bundled. This is how I imagine the future(TM), where DTs and
> bindings live outside the kernel repo.

Yes, that's preferred. Therefore in DTS patch you say the binding is not
merged and it is here - lore link.

> 
>> The bindings should be however kept with driver changes as it goes the
>> same way.
> 
> I understand that the bindings describe the contract the driver acts on,
> but going forward I think driver changes would need to come later, then
> (since they will live in a separate repo at some day)?
> Maybe pointing to the binding changes in progress?

Later as one commit later - yes. Later as other option - not really, why?

> So with a separate repo we would actually need to upstream just the
> bindings first, then could push driver changes and .dts files
> independently?

There is no separate repo, so we talk about Linux case now.

> And for now it looks like we are stuck with putting everything in one
> series, to make both checkpatch and dtbs_check happy.

You should rather make maintainers happy :) and here one asked to split.

Best regards,
Krzysztof
Andre Przywara Nov. 15, 2022, 5:57 p.m. UTC | #8
On Tue, 15 Nov 2022 17:29:09 +0100
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

Hi,

> On 15/11/2022 17:19, Andre Przywara wrote:
> > On Tue, 15 Nov 2022 16:00:54 +0100
> > Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> > 
> > Hi,
> >   
> >> On 15/11/2022 11:44, Andre Przywara wrote:  
> >>> On Tue, 15 Nov 2022 11:03:24 +0100
> >>> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> >>>
> >>> Hi,
> >>>     
> >>>> On 15/11/2022 07:01, Jernej Škrabec wrote:    
> >>>>> Dne četrtek, 10. november 2022 ob 08:35:39 CET je Vinod Koul napisal(a):      
> >>>>>> On 06-11-22, 15:48, Andre Przywara wrote:      
> >>>>>>> From: Icenowy Zheng <uwu@icenowy.me>
> >>>>>>>
> >>>>>>> The F1C100s SoC has one USB OTG port connected to a MUSB controller.
> >>>>>>>
> >>>>>>> Add support for its USB PHY.      
> >>>>>>
> >>>>>> This does not apply for me, please rebase and resend
> >>>>>>
> >>>>>> Also, consider splitting phy patches from this. I dont think there is
> >>>>>> any dependency      
> >>>>>
> >>>>> DT patches in this series depend on functionality added here.
> >>>>>       
> >>>>
> >>>> DTS always goes separately from driver changes because it is a hardware
> >>>> description. Depending on driver means you have potential ABI break, so
> >>>> it is already a warning sign.    
> >>>
> >>> We understand that ;-)
> >>> What Jernej meant was that the DTS patches at the end depend on patch
> >>> 01/10, which adds to the PHY binding doc. I am not sure if Vinod's
> >>> suggestion was about splitting off 01/10, 03/10, and 10/10, or just the
> >>> two latter which touch the driver.
> >>>
> >>> I can split off 03/10 and 10/10, rebased on top of linux-phy.git/next, and
> >>> send that to Vinod.
> >>> Then I would keep 01/10 in a respin of this series here, to satisfy the
> >>> dependency of the later DTS patches, and Vinod can pick that one patch from
> >>> there?    
> >>
> >> There is no hard dependency of DTS on bindings. You can split these (and
> >> some maintainers prefer that way) and in DTS patches just provide the
> >> link to the bindings, saying it is in progress.  
> > 
> > But that breaks "make dtbs_check", doesn't it?  
> 
> The check will be broken anyway because binding goes via driver
> subsystem and DTS goes via arm-soc.
> 
> If both make to the linux-next and next release, then it's not a problem.
> 
> > 
> > I would think that the DT bits - bindings first, then DTS files using it -
> > should be bundled. This is how I imagine the future(TM), where DTs and
> > bindings live outside the kernel repo.  
> 
> Yes, that's preferred. Therefore in DTS patch you say the binding is not
> merged and it is here - lore link.
> 
> >   
> >> The bindings should be however kept with driver changes as it goes the
> >> same way.  
> > 
> > I understand that the bindings describe the contract the driver acts on,
> > but going forward I think driver changes would need to come later, then
> > (since they will live in a separate repo at some day)?
> > Maybe pointing to the binding changes in progress?  
> 
> Later as one commit later - yes. Later as other option - not really, why?
> 
> > So with a separate repo we would actually need to upstream just the
> > bindings first, then could push driver changes and .dts files
> > independently?  
> 
> There is no separate repo, so we talk about Linux case now.
> 
> > And for now it looks like we are stuck with putting everything in one
> > series, to make both checkpatch and dtbs_check happy.  
> 
> You should rather make maintainers happy :) and here one asked to split.

Well, he asked to split off the USB PHY patches from the rest of the
series, since there is some conflict with the recently merged H616 USB PHY
patches. It is still unclear to me whether this split includes the binding
patch, or just the two patches touching the actual code.

Cheers,
Andre.
Andre Przywara Nov. 24, 2022, 10:13 p.m. UTC | #9
On Thu, 24 Nov 2022 23:19:30 +0530
Vinod Koul <vkoul@kernel.org> wrote:

> On 15-11-22, 17:57, Andre Przywara wrote:
> > On Tue, 15 Nov 2022 17:29:09 +0100
> > Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> > 
> > Hi,
> >   
> > > On 15/11/2022 17:19, Andre Przywara wrote:  
> > > > On Tue, 15 Nov 2022 16:00:54 +0100
> > > > Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> > > > 
> > > > Hi,
> > > >     
> > > >> On 15/11/2022 11:44, Andre Przywara wrote:    
> > > >>> On Tue, 15 Nov 2022 11:03:24 +0100
> > > >>> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> > > >>>
> > > >>> Hi,
> > > >>>       
> > > >>>> On 15/11/2022 07:01, Jernej Škrabec wrote:      
> > > >>>>> Dne četrtek, 10. november 2022 ob 08:35:39 CET je Vinod Koul napisal(a):        
> > > >>>>>> On 06-11-22, 15:48, Andre Przywara wrote:        
> > > >>>>>>> From: Icenowy Zheng <uwu@icenowy.me>
> > > >>>>>>>
> > > >>>>>>> The F1C100s SoC has one USB OTG port connected to a MUSB controller.
> > > >>>>>>>
> > > >>>>>>> Add support for its USB PHY.        
> > > >>>>>>
> > > >>>>>> This does not apply for me, please rebase and resend
> > > >>>>>>
> > > >>>>>> Also, consider splitting phy patches from this. I dont think there is
> > > >>>>>> any dependency        
> > > >>>>>
> > > >>>>> DT patches in this series depend on functionality added here.
> > > >>>>>         
> > > >>>>
> > > >>>> DTS always goes separately from driver changes because it is a hardware
> > > >>>> description. Depending on driver means you have potential ABI break, so
> > > >>>> it is already a warning sign.      
> > > >>>
> > > >>> We understand that ;-)
> > > >>> What Jernej meant was that the DTS patches at the end depend on patch
> > > >>> 01/10, which adds to the PHY binding doc. I am not sure if Vinod's
> > > >>> suggestion was about splitting off 01/10, 03/10, and 10/10, or just the
> > > >>> two latter which touch the driver.
> > > >>>
> > > >>> I can split off 03/10 and 10/10, rebased on top of linux-phy.git/next, and
> > > >>> send that to Vinod.
> > > >>> Then I would keep 01/10 in a respin of this series here, to satisfy the
> > > >>> dependency of the later DTS patches, and Vinod can pick that one patch from
> > > >>> there?      
> > > >>
> > > >> There is no hard dependency of DTS on bindings. You can split these (and
> > > >> some maintainers prefer that way) and in DTS patches just provide the
> > > >> link to the bindings, saying it is in progress.    
> > > > 
> > > > But that breaks "make dtbs_check", doesn't it?    
> > > 
> > > The check will be broken anyway because binding goes via driver
> > > subsystem and DTS goes via arm-soc.
> > > 
> > > If both make to the linux-next and next release, then it's not a problem.
> > >   
> > > > 
> > > > I would think that the DT bits - bindings first, then DTS files using it -
> > > > should be bundled. This is how I imagine the future(TM), where DTs and
> > > > bindings live outside the kernel repo.    
> > > 
> > > Yes, that's preferred. Therefore in DTS patch you say the binding is not
> > > merged and it is here - lore link.
> > >   
> > > >     
> > > >> The bindings should be however kept with driver changes as it goes the
> > > >> same way.    
> > > > 
> > > > I understand that the bindings describe the contract the driver acts on,
> > > > but going forward I think driver changes would need to come later, then
> > > > (since they will live in a separate repo at some day)?
> > > > Maybe pointing to the binding changes in progress?    
> > > 
> > > Later as one commit later - yes. Later as other option - not really, why?
> > >   
> > > > So with a separate repo we would actually need to upstream just the
> > > > bindings first, then could push driver changes and .dts files
> > > > independently?    
> > > 
> > > There is no separate repo, so we talk about Linux case now.
> > >   
> > > > And for now it looks like we are stuck with putting everything in one
> > > > series, to make both checkpatch and dtbs_check happy.    
> > > 
> > > You should rather make maintainers happy :) and here one asked to split.  
> > 
> > Well, he asked to split off the USB PHY patches from the rest of the
> > series, since there is some conflict with the recently merged H616 USB PHY
> > patches. It is still unclear to me whether this split includes the binding
> > patch, or just the two patches touching the actual code.  
> 
> That mean split off USB phy and binding patches from rest and send for
> review

Thanks, I figured, and that's what I did:

https://lore.kernel.org/linux-arm-kernel/20221116151603.819533-1-andre.przywara@arm.com/

Hope that fits!

Cheers,
Andre

> 
> DTS or anything else should not be part of that
>
diff mbox series

Patch

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 3a3831f6059a..51fb24c6dcb3 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -859,6 +859,14 @@  static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = {
+	.num_phys = 1,
+	.type = sun4i_a10_phy,
+	.disc_thresh = 3,
+	.phyctl_offset = REG_PHYCTL_A10,
+	.dedicated_clocks = true,
+};
+
 static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
 	.num_phys = 3,
 	.type = sun4i_a10_phy,
@@ -988,6 +996,8 @@  static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun50i-a64-usb-phy",
 	  .data = &sun50i_a64_cfg},
 	{ .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg },
+	{ .compatible = "allwinner,suniv-f1c100s-usb-phy",
+	  .data = &suniv_f1c100s_cfg },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);