Message ID | 20221115170242.150246-2-srinivas.kandagatla@linaro.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | arm64: dts: qcom: sc8280xp: add audio support | expand |
On 15/11/2022 18:02, Srinivas Kandagatla wrote: > Add GPR node along with APM(Audio Process Manager) and PRM(Proxy > resource Manager) audio services. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 40 ++++++++++++++++++++++++++ > 1 file changed, 40 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > index c32bcded2aef..e3cdd8bccb0c 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > @@ -12,6 +12,7 @@ > #include <dt-bindings/power/qcom-rpmpd.h> > #include <dt-bindings/soc/qcom,rpmh-rsc.h> > #include <dt-bindings/thermal/thermal.h> > +#include <dt-bindings/soc/qcom,gpr.h> > > / { > interrupt-parent = <&intc>; > @@ -1152,6 +1153,45 @@ IPCC_MPROC_SIGNAL_GLINK_QMP > > label = "lpass"; > qcom,remote-pid = <2>; > + > + gpr { > + compatible = "qcom,gpr"; > + qcom,glink-channels = "adsp_apps"; > + qcom,domain = <GPR_DOMAIN_ID_ADSP>; > + #address-cells = <1>; > + #size-cells = <0>; > + qcom,intents = <512 20>; > + > + q6apm: q6apm { > + reg = <GPR_APM_MODULE_IID>; > + compatible = "qcom,q6apm"; > + #sound-dai-cells = <0>; > + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; > + q6apmdai: dais { > + compatible = "qcom,q6apm-dais"; > + #sound-dai-cells = <1>; DAI cells are not allowed by binding, so either drop it or update binding. > + iommus = <&apps_smmu 0x0c01 0x0>; > + }; > + > + q6apmbedai: bedais { > + compatible = "qcom,q6apm-lpass-dais"; > + #sound-dai-cells = <1>; > + }; > + }; > + > + q6prm: q6prm { > + reg = <GPR_PRM_MODULE_IID>; > + compatible = "qcom,q6prm"; > + #clock-cells = <2>; Not allowed by binding. > + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; > + q6prmcc: cc { This should be "clock-controller". > + compatible = "qcom,q6prm-lpass-clocks"; > + #clock-cells = <2>; > + }; > + }; > + Drop empty line > + }; > + Ditto > }; > }; > Best regards, Krzysztof
On Tue, Nov 15, 2022 at 05:02:40PM +0000, Srinivas Kandagatla wrote: > Add GPR node along with APM(Audio Process Manager) and PRM(Proxy Perhaps spell out GPR as well. > resource Manager) audio services. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 40 ++++++++++++++++++++++++++ > 1 file changed, 40 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > index c32bcded2aef..e3cdd8bccb0c 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > @@ -12,6 +12,7 @@ > #include <dt-bindings/power/qcom-rpmpd.h> > #include <dt-bindings/soc/qcom,rpmh-rsc.h> > #include <dt-bindings/thermal/thermal.h> > +#include <dt-bindings/soc/qcom,gpr.h> Please keep the include directives sorted. > > / { > interrupt-parent = <&intc>; > @@ -1152,6 +1153,45 @@ IPCC_MPROC_SIGNAL_GLINK_QMP > > label = "lpass"; > qcom,remote-pid = <2>; > + > + gpr { > + compatible = "qcom,gpr"; > + qcom,glink-channels = "adsp_apps"; > + qcom,domain = <GPR_DOMAIN_ID_ADSP>; > + #address-cells = <1>; > + #size-cells = <0>; I'd move the address and size cells properties above the vendor ones. > + qcom,intents = <512 20>; > + > + q6apm: q6apm { > + reg = <GPR_APM_MODULE_IID>; > + compatible = "qcom,q6apm"; Please move compatible before reg throughout. > + #sound-dai-cells = <0>; > + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; > + q6apmdai: dais { > + compatible = "qcom,q6apm-dais"; > + #sound-dai-cells = <1>; > + iommus = <&apps_smmu 0x0c01 0x0>; > + }; > + > + q6apmbedai: bedais { > + compatible = "qcom,q6apm-lpass-dais"; > + #sound-dai-cells = <1>; > + }; > + }; > + > + q6prm: q6prm { > + reg = <GPR_PRM_MODULE_IID>; > + compatible = "qcom,q6prm"; > + #clock-cells = <2>; > + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; > + q6prmcc: cc { > + compatible = "qcom,q6prm-lpass-clocks"; > + #clock-cells = <2>; > + }; > + }; > + Stray new line. > + }; > + Same here. > }; > }; Johan
On 16/11/2022 08:06, Krzysztof Kozlowski wrote: > On 15/11/2022 18:02, Srinivas Kandagatla wrote: >> Add GPR node along with APM(Audio Process Manager) and PRM(Proxy >> resource Manager) audio services. >> >> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> >> --- >> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 40 ++++++++++++++++++++++++++ >> 1 file changed, 40 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi >> index c32bcded2aef..e3cdd8bccb0c 100644 >> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi >> @@ -12,6 +12,7 @@ >> #include <dt-bindings/power/qcom-rpmpd.h> >> #include <dt-bindings/soc/qcom,rpmh-rsc.h> >> #include <dt-bindings/thermal/thermal.h> >> +#include <dt-bindings/soc/qcom,gpr.h> >> >> / { >> interrupt-parent = <&intc>; >> @@ -1152,6 +1153,45 @@ IPCC_MPROC_SIGNAL_GLINK_QMP >> >> label = "lpass"; >> qcom,remote-pid = <2>; >> + >> + gpr { >> + compatible = "qcom,gpr"; >> + qcom,glink-channels = "adsp_apps"; >> + qcom,domain = <GPR_DOMAIN_ID_ADSP>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + qcom,intents = <512 20>; >> + >> + q6apm: q6apm { >> + reg = <GPR_APM_MODULE_IID>; >> + compatible = "qcom,q6apm"; >> + #sound-dai-cells = <0>; >> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; >> + q6apmdai: dais { >> + compatible = "qcom,q6apm-dais"; >> + #sound-dai-cells = <1>; > > DAI cells are not allowed by binding, so either drop it or update binding. Thanks Krzystof, Konrad and Johan for reviewing. I agree with all of the comments and they are fixed now. it will be part of v2. --srini > >> + iommus = <&apps_smmu 0x0c01 0x0>; >> + }; >> + >> + q6apmbedai: bedais { >> + compatible = "qcom,q6apm-lpass-dais"; >> + #sound-dai-cells = <1>; >> + }; >> + }; >> + >> + q6prm: q6prm { >> + reg = <GPR_PRM_MODULE_IID>; >> + compatible = "qcom,q6prm"; >> + #clock-cells = <2>; > > Not allowed by binding. > >> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; >> + q6prmcc: cc { > > This should be "clock-controller". > >> + compatible = "qcom,q6prm-lpass-clocks"; >> + #clock-cells = <2>; >> + }; >> + }; >> + > > Drop empty line > >> + }; >> + > > Ditto > >> }; >> }; >> > > Best regards, > Krzysztof >
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index c32bcded2aef..e3cdd8bccb0c 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/soc/qcom,gpr.h> / { interrupt-parent = <&intc>; @@ -1152,6 +1153,45 @@ IPCC_MPROC_SIGNAL_GLINK_QMP label = "lpass"; qcom,remote-pid = <2>; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + qcom,intents = <512 20>; + + q6apm: q6apm { + reg = <GPR_APM_MODULE_IID>; + compatible = "qcom,q6apm"; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x0c01 0x0>; + }; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + }; + + q6prm: q6prm { + reg = <GPR_PRM_MODULE_IID>; + compatible = "qcom,q6prm"; + #clock-cells = <2>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6prmcc: cc { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + + }; + }; };
Add GPR node along with APM(Audio Process Manager) and PRM(Proxy resource Manager) audio services. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 40 ++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)