Message ID | 20221116231947.18031-2-p.jungkamp@gmx.net (mailing list archive) |
---|---|
State | Changes Requested |
Headers | show |
Series | [1/3] HID: hid-sensor-custom: More custom iio sensors | expand |
On Thu, 17 Nov 2022 00:19:46 +0100 Philipp Jungkamp <p.jungkamp@gmx.net> wrote: > Use a generic 'hsdev->usage' instead of the HID_USAGE_SENSOR_ALS to > allow this driver to drive the Lenvo custom ambient light sensor, Lenovo > which is registered under a 'custom' usage and not HID_USAGE_SENSOR_ALS. > > Add the Lenovo Intelligent Sensing Solution (LISS) ambient light sensor > to the platform device ids. > > Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net> It's a small patch, but in the ideal world, first patch should be a noop patch that makes the hid-sensor-als stuff able to use a provided usage ID. Second patch then adds the new one. > --- > drivers/hid/hid-sensor-custom.c | 13 +++++++++++++ > drivers/iio/light/hid-sensor-als.c | 24 +++++++++++++++++------- > 2 files changed, 30 insertions(+), 7 deletions(-) > > diff --git a/drivers/hid/hid-sensor-custom.c b/drivers/hid/hid-sensor-custom.c > index cb21f9178830..124493b8abaf 100644 > --- a/drivers/hid/hid-sensor-custom.c > +++ b/drivers/hid/hid-sensor-custom.c > @@ -782,6 +782,19 @@ static const struct hid_sensor_custom_match hid_sensor_custom_known_table[] = { > .luid = "020B000000000000", > .manufacturer = "INTEL", > }, > + /* > + * Lenovo Intelligent Sensing Solution (LISS) > + */ > + { /* ambient light */ > + .tag = "LISS", > + .luid = "0041010200000082", > + .model = "STK3X3X Sensor", > + .manufacturer = "Vendor 258", They should definitely rebrand their laptops as this :) > + .check_dmi = true, > + .dmi.matches = { > + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), > + } > + }, > {} > }; > > diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c > index 5a1a625d8d16..0ada158582a9 100644 > --- a/drivers/iio/light/hid-sensor-als.c > +++ b/drivers/iio/light/hid-sensor-als.c > @@ -86,6 +86,7 @@ static int als_read_raw(struct iio_dev *indio_dev, > long mask) > { > struct als_state *als_state = iio_priv(indio_dev); > + struct hid_sensor_hub_device *hsdev = als_state->common_attributes.hsdev; > int report_id = -1; > u32 address; > int ret_type; > @@ -110,8 +111,9 @@ static int als_read_raw(struct iio_dev *indio_dev, > hid_sensor_power_state(&als_state->common_attributes, > true); > *val = sensor_hub_input_attr_get_raw_value( > - als_state->common_attributes.hsdev, > - HID_USAGE_SENSOR_ALS, address, > + hsdev, > + hsdev->usage, > + address, > report_id, > SENSOR_HUB_SYNC, > min < 0); > @@ -260,7 +262,7 @@ static int als_parse_report(struct platform_device *pdev, > st->als_illum.report_id); > > st->scale_precision = hid_sensor_format_scale( > - HID_USAGE_SENSOR_ALS, > + usage_id, > &st->als_illum, > &st->scale_pre_decml, &st->scale_post_decml); > > @@ -285,7 +287,8 @@ static int hid_als_probe(struct platform_device *pdev) > als_state->common_attributes.hsdev = hsdev; > als_state->common_attributes.pdev = pdev; > > - ret = hid_sensor_parse_common_attributes(hsdev, HID_USAGE_SENSOR_ALS, > + ret = hid_sensor_parse_common_attributes(hsdev, > + hsdev->usage, > &als_state->common_attributes, > als_sensitivity_addresses, > ARRAY_SIZE(als_sensitivity_addresses)); > @@ -303,7 +306,8 @@ static int hid_als_probe(struct platform_device *pdev) > > ret = als_parse_report(pdev, hsdev, > (struct iio_chan_spec *)indio_dev->channels, > - HID_USAGE_SENSOR_ALS, als_state); > + hsdev->usage, > + als_state); > if (ret) { > dev_err(&pdev->dev, "failed to setup attributes\n"); > return ret; > @@ -333,7 +337,8 @@ static int hid_als_probe(struct platform_device *pdev) > als_state->callbacks.send_event = als_proc_event; > als_state->callbacks.capture_sample = als_capture_sample; > als_state->callbacks.pdev = pdev; > - ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_ALS, > + ret = sensor_hub_register_callback(hsdev, > + hsdev->usage, > &als_state->callbacks); Where possible, put multiple params on a line up to the 80 chars limit. If it improves readability for some reason to go a bit beyond 80 chars, that is fine too. > if (ret < 0) { > dev_err(&pdev->dev, "callback reg failed\n"); > @@ -356,7 +361,8 @@ static int hid_als_remove(struct platform_device *pdev) > struct iio_dev *indio_dev = platform_get_drvdata(pdev); > struct als_state *als_state = iio_priv(indio_dev); > > - sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ALS); > + sensor_hub_remove_callback(hsdev, > + hsdev->usage); Oddly short line wrap. > iio_device_unregister(indio_dev); > hid_sensor_remove_trigger(indio_dev, &als_state->common_attributes); > > @@ -368,6 +374,10 @@ static const struct platform_device_id hid_als_ids[] = { > /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ > .name = "HID-SENSOR-200041", > }, > + { > + /* Format: HID-SENSOR-custom_sensor_tag-usage_id_in_hex_lowercase */ > + .name = "HID-SENSOR-LISS-0041", > + }, > { /* sentinel */ } > }; > MODULE_DEVICE_TABLE(platform, hid_als_ids); > -- > 2.38.1 >
diff --git a/drivers/hid/hid-sensor-custom.c b/drivers/hid/hid-sensor-custom.c index cb21f9178830..124493b8abaf 100644 --- a/drivers/hid/hid-sensor-custom.c +++ b/drivers/hid/hid-sensor-custom.c @@ -782,6 +782,19 @@ static const struct hid_sensor_custom_match hid_sensor_custom_known_table[] = { .luid = "020B000000000000", .manufacturer = "INTEL", }, + /* + * Lenovo Intelligent Sensing Solution (LISS) + */ + { /* ambient light */ + .tag = "LISS", + .luid = "0041010200000082", + .model = "STK3X3X Sensor", + .manufacturer = "Vendor 258", + .check_dmi = true, + .dmi.matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + } + }, {} }; diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c index 5a1a625d8d16..0ada158582a9 100644 --- a/drivers/iio/light/hid-sensor-als.c +++ b/drivers/iio/light/hid-sensor-als.c @@ -86,6 +86,7 @@ static int als_read_raw(struct iio_dev *indio_dev, long mask) { struct als_state *als_state = iio_priv(indio_dev); + struct hid_sensor_hub_device *hsdev = als_state->common_attributes.hsdev; int report_id = -1; u32 address; int ret_type; @@ -110,8 +111,9 @@ static int als_read_raw(struct iio_dev *indio_dev, hid_sensor_power_state(&als_state->common_attributes, true); *val = sensor_hub_input_attr_get_raw_value( - als_state->common_attributes.hsdev, - HID_USAGE_SENSOR_ALS, address, + hsdev, + hsdev->usage, + address, report_id, SENSOR_HUB_SYNC, min < 0); @@ -260,7 +262,7 @@ static int als_parse_report(struct platform_device *pdev, st->als_illum.report_id); st->scale_precision = hid_sensor_format_scale( - HID_USAGE_SENSOR_ALS, + usage_id, &st->als_illum, &st->scale_pre_decml, &st->scale_post_decml); @@ -285,7 +287,8 @@ static int hid_als_probe(struct platform_device *pdev) als_state->common_attributes.hsdev = hsdev; als_state->common_attributes.pdev = pdev; - ret = hid_sensor_parse_common_attributes(hsdev, HID_USAGE_SENSOR_ALS, + ret = hid_sensor_parse_common_attributes(hsdev, + hsdev->usage, &als_state->common_attributes, als_sensitivity_addresses, ARRAY_SIZE(als_sensitivity_addresses)); @@ -303,7 +306,8 @@ static int hid_als_probe(struct platform_device *pdev) ret = als_parse_report(pdev, hsdev, (struct iio_chan_spec *)indio_dev->channels, - HID_USAGE_SENSOR_ALS, als_state); + hsdev->usage, + als_state); if (ret) { dev_err(&pdev->dev, "failed to setup attributes\n"); return ret; @@ -333,7 +337,8 @@ static int hid_als_probe(struct platform_device *pdev) als_state->callbacks.send_event = als_proc_event; als_state->callbacks.capture_sample = als_capture_sample; als_state->callbacks.pdev = pdev; - ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_ALS, + ret = sensor_hub_register_callback(hsdev, + hsdev->usage, &als_state->callbacks); if (ret < 0) { dev_err(&pdev->dev, "callback reg failed\n"); @@ -356,7 +361,8 @@ static int hid_als_remove(struct platform_device *pdev) struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct als_state *als_state = iio_priv(indio_dev); - sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ALS); + sensor_hub_remove_callback(hsdev, + hsdev->usage); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &als_state->common_attributes); @@ -368,6 +374,10 @@ static const struct platform_device_id hid_als_ids[] = { /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ .name = "HID-SENSOR-200041", }, + { + /* Format: HID-SENSOR-custom_sensor_tag-usage_id_in_hex_lowercase */ + .name = "HID-SENSOR-LISS-0041", + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(platform, hid_als_ids);
Use a generic 'hsdev->usage' instead of the HID_USAGE_SENSOR_ALS to allow this driver to drive the Lenvo custom ambient light sensor, which is registered under a 'custom' usage and not HID_USAGE_SENSOR_ALS. Add the Lenovo Intelligent Sensing Solution (LISS) ambient light sensor to the platform device ids. Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net> --- drivers/hid/hid-sensor-custom.c | 13 +++++++++++++ drivers/iio/light/hid-sensor-als.c | 24 +++++++++++++++++------- 2 files changed, 30 insertions(+), 7 deletions(-) -- 2.38.1