| Message ID | 20221117122547.809644-8-tomi.valkeinen@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Renesas V4H DSI & DP output support | expand |
Quoting Tomi Valkeinen (2022-11-17 12:25:46) > From: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> > > Add DSI support for r8a779g0. The main differences to r8a779a0 are in > the PLL and PHTW setups. > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> > --- > drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c | 484 +++++++++++++++---- > drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h | 6 +- > 2 files changed, 384 insertions(+), 106 deletions(-) > > diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c > index a7f2b7f66a17..723c35726c38 100644 > --- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c > +++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c > @@ -9,6 +9,7 @@ > #include <linux/delay.h> > #include <linux/io.h> > #include <linux/iopoll.h> > +#include <linux/math64.h> > #include <linux/module.h> > #include <linux/of.h> > #include <linux/of_device.h> > @@ -28,6 +29,20 @@ > #include "rcar_mipi_dsi.h" > #include "rcar_mipi_dsi_regs.h" > > +#define MHZ(v) ((v) * 1000000u) > + > +enum rcar_mipi_dsi_hw_model { > + RCAR_DSI_R8A779A0, > + RCAR_DSI_R8A779G0, > +}; > + > +struct rcar_mipi_dsi_device_info { > + enum rcar_mipi_dsi_hw_model model; > + const struct dsi_clk_config *clk_cfg; > + u8 clockset2_m_offset; > + u8 clockset2_n_offset; > +}; > + > struct rcar_mipi_dsi { > struct device *dev; > const struct rcar_mipi_dsi_device_info *info; > @@ -50,6 +65,17 @@ struct rcar_mipi_dsi { > unsigned int lanes; > }; > > +struct dsi_setup_info { > + unsigned long hsfreq; > + u16 hsfreqrange; > + > + unsigned long fout; > + u16 m; > + u16 n; > + u16 vclk_divider; > + const struct dsi_clk_config *clkset; > +}; > + > static inline struct rcar_mipi_dsi * > bridge_to_rcar_mipi_dsi(struct drm_bridge *bridge) > { > @@ -62,22 +88,6 @@ host_to_rcar_mipi_dsi(struct mipi_dsi_host *host) > return container_of(host, struct rcar_mipi_dsi, host); > } > > -static const u32 phtw[] = { > - 0x01020114, 0x01600115, /* General testing */ > - 0x01030116, 0x0102011d, /* General testing */ > - 0x011101a4, 0x018601a4, /* 1Gbps testing */ > - 0x014201a0, 0x010001a3, /* 1Gbps testing */ > - 0x0101011f, /* 1Gbps testing */ > -}; > - > -static const u32 phtw2[] = { > - 0x010c0130, 0x010c0140, /* General testing */ > - 0x010c0150, 0x010c0180, /* General testing */ > - 0x010c0190, > - 0x010a0160, 0x010a0170, > - 0x01800164, 0x01800174, /* 1Gbps testing */ > -}; > - > static const u32 hsfreqrange_table[][2] = { > { 80000000U, 0x00 }, { 90000000U, 0x10 }, { 100000000U, 0x20 }, > { 110000000U, 0x30 }, { 120000000U, 0x01 }, { 130000000U, 0x11 }, > @@ -103,24 +113,53 @@ static const u32 hsfreqrange_table[][2] = { > { /* sentinel */ }, > }; > > -struct vco_cntrl_value { > +struct dsi_clk_config { > u32 min_freq; > u32 max_freq; > - u16 value; > + u8 vco_cntrl; > + u8 cpbias_cntrl; > + u8 gmp_cntrl; > + u8 int_cntrl; > + u8 prop_cntrl; > }; > > -static const struct vco_cntrl_value vco_cntrl_table[] = { > - { .min_freq = 40000000U, .max_freq = 55000000U, .value = 0x3f }, > - { .min_freq = 52500000U, .max_freq = 80000000U, .value = 0x39 }, > - { .min_freq = 80000000U, .max_freq = 110000000U, .value = 0x2f }, > - { .min_freq = 105000000U, .max_freq = 160000000U, .value = 0x29 }, > - { .min_freq = 160000000U, .max_freq = 220000000U, .value = 0x1f }, > - { .min_freq = 210000000U, .max_freq = 320000000U, .value = 0x19 }, > - { .min_freq = 320000000U, .max_freq = 440000000U, .value = 0x0f }, > - { .min_freq = 420000000U, .max_freq = 660000000U, .value = 0x09 }, > - { .min_freq = 630000000U, .max_freq = 1149000000U, .value = 0x03 }, > - { .min_freq = 1100000000U, .max_freq = 1152000000U, .value = 0x01 }, > - { .min_freq = 1150000000U, .max_freq = 1250000000U, .value = 0x01 }, > +static const struct dsi_clk_config dsi_clk_cfg_r8a779a0[] = { > + { 40000000u, 55000000u, 0x3f, 0x10, 0x01, 0x00, 0x0b }, > + { 52500000u, 80000000u, 0x39, 0x10, 0x01, 0x00, 0x0b }, > + { 80000000u, 110000000u, 0x2f, 0x10, 0x01, 0x00, 0x0b }, > + { 105000000u, 160000000u, 0x29, 0x10, 0x01, 0x00, 0x0b }, > + { 160000000u, 220000000u, 0x1f, 0x10, 0x01, 0x00, 0x0b }, > + { 210000000u, 320000000u, 0x19, 0x10, 0x01, 0x00, 0x0b }, > + { 320000000u, 440000000u, 0x0f, 0x10, 0x01, 0x00, 0x0b }, > + { 420000000u, 660000000u, 0x09, 0x10, 0x01, 0x00, 0x0b }, > + { 630000000u, 1149000000u, 0x03, 0x10, 0x01, 0x00, 0x0b }, > + { 1100000000u, 1152000000u, 0x01, 0x10, 0x01, 0x00, 0x0b }, > + { 1150000000u, 1250000000u, 0x01, 0x10, 0x01, 0x00, 0x0c }, Sigh ... is it this one 0x0c value that means we need to keep all these entries repeated ? :-S If it weren't for that, it seems we could keep just two sets of > + u8 cpbias_cntrl; > + u8 gmp_cntrl; > + u8 int_cntrl; > + u8 prop_cntrl; One for each of the 9a0, and the 9g0... But this is fine, and I guess the implication is there may be other future differences to come in other platforms. It could be refactored then when we have more visibility. > + { /* sentinel */ }, > +}; > + > +static const struct dsi_clk_config dsi_clk_cfg_r8a779g0[] = { > + { 40000000u, 45310000u, 0x2b, 0x00, 0x00, 0x08, 0x0a }, > + { 45310000u, 54660000u, 0x28, 0x00, 0x00, 0x08, 0x0a }, > + { 54660000u, 62500000u, 0x28, 0x00, 0x00, 0x08, 0x0a }, > + { 62500000u, 75000000u, 0x27, 0x00, 0x00, 0x08, 0x0a }, > + { 75000000u, 90630000u, 0x23, 0x00, 0x00, 0x08, 0x0a }, > + { 90630000u, 109370000u, 0x20, 0x00, 0x00, 0x08, 0x0a }, > + { 109370000u, 125000000u, 0x20, 0x00, 0x00, 0x08, 0x0a }, > + { 125000000u, 150000000u, 0x1f, 0x00, 0x00, 0x08, 0x0a }, > + { 150000000u, 181250000u, 0x1b, 0x00, 0x00, 0x08, 0x0a }, > + { 181250000u, 218750000u, 0x18, 0x00, 0x00, 0x08, 0x0a }, > + { 218750000u, 250000000u, 0x18, 0x00, 0x00, 0x08, 0x0a }, > + { 250000000u, 300000000u, 0x17, 0x00, 0x00, 0x08, 0x0a }, > + { 300000000u, 362500000u, 0x13, 0x00, 0x00, 0x08, 0x0a }, > + { 362500000u, 455480000u, 0x10, 0x00, 0x00, 0x08, 0x0a }, > + { 455480000u, 500000000u, 0x10, 0x00, 0x00, 0x08, 0x0a }, > + { 500000000u, 600000000u, 0x0f, 0x00, 0x00, 0x08, 0x0a }, > + { 600000000u, 725000000u, 0x0b, 0x00, 0x00, 0x08, 0x0a }, > + { 725000000u, 875000000u, 0x08, 0x00, 0x00, 0x08, 0x0a }, > + { 875000000u, 1000000000u, 0x08, 0x00, 0x00, 0x08, 0x0a }, > + { 1000000000u, 1200000000u, 0x07, 0x00, 0x00, 0x08, 0x0a }, > + { 1200000000u, 1250000000u, 0x03, 0x00, 0x00, 0x08, 0x0a }, > { /* sentinel */ }, > }; > > @@ -144,7 +183,7 @@ static void rcar_mipi_dsi_set(struct rcar_mipi_dsi *dsi, u32 reg, u32 set) > rcar_mipi_dsi_write(dsi, reg, rcar_mipi_dsi_read(dsi, reg) | set); > } > > -static int rcar_mipi_dsi_phtw_test(struct rcar_mipi_dsi *dsi, u32 phtw) > +static int rcar_mipi_dsi_write_phtw(struct rcar_mipi_dsi *dsi, u32 phtw) > { > u32 status; > int ret; > @@ -163,32 +202,231 @@ static int rcar_mipi_dsi_phtw_test(struct rcar_mipi_dsi *dsi, u32 phtw) > return ret; > } > > +static int rcar_mipi_dsi_write_phtw_arr(struct rcar_mipi_dsi *dsi, > + const u32 *phtw, unsigned int size) > +{ > + for (unsigned int i = 0; i < size; i++) { > + int ret = rcar_mipi_dsi_write_phtw(dsi, phtw[i]); > + > + if (ret < 0) > + return ret; > + } > + > + return 0; > +} > + > +#define WRITE_PHTW(...) \ > + ({ \ > + static const u32 phtw[] = { __VA_ARGS__ }; \ > + int ret; \ > + ret = rcar_mipi_dsi_write_phtw_arr(dsi, phtw, \ > + ARRAY_SIZE(phtw)); \ > + ret; \ > + }) > + > +static int rcar_mipi_dsi_init_phtw_v3u(struct rcar_mipi_dsi *dsi) > +{ > + return WRITE_PHTW(0x01020114, 0x01600115, 0x01030116, 0x0102011d, > + 0x011101a4, 0x018601a4, 0x014201a0, 0x010001a3, > + 0x0101011f); > +} > + > +static int rcar_mipi_dsi_post_init_phtw_v3u(struct rcar_mipi_dsi *dsi) > +{ > + return WRITE_PHTW(0x010c0130, 0x010c0140, 0x010c0150, 0x010c0180, > + 0x010c0190, 0x010a0160, 0x010a0170, 0x01800164, > + 0x01800174); > +} > + > +static int rcar_mipi_dsi_init_phtw_v4h(struct rcar_mipi_dsi *dsi, > + const struct dsi_setup_info *setup_info) > +{ > + int ret; > + > + if (setup_info->hsfreq < MHZ(450)) { > + ret = WRITE_PHTW(0x01010100, 0x011b01ac); > + if (ret) > + return ret; > + } > + > + ret = WRITE_PHTW(0x01010100, 0x01030173, 0x01000174, 0x01500175, > + 0x01030176, 0x01040166, 0x010201ad); Ok - I can see this at 67.3.5. > + if (ret) > + return ret; > + > + if (setup_info->hsfreq <= MHZ(1000)) > + ret = WRITE_PHTW(0x01020100, 0x01910170, 0x01020171, > + 0x01110172); The <=1Gbps reads: <=1Gbps Set PHTW=H’01020100 Set PHTW=H’01010172 Set PHTW=H’01570170 Set PHTW=H’01060171 Set PHTW=H’01110172 Is it clear why theres a difference here? > + else if (setup_info->hsfreq <= MHZ(1500)) > + ret = WRITE_PHTW(0x01020100, 0x01980170, 0x01030171, > + 0x01100172); And here, it states the following which differs: 1Gbps < and <=1.5Gbps Set PHTW=H’01020100 Set PHTW=H’01000172 Set PHTW=H’01200170 Set PHTW=H’01090171 Set PHTW=H’01100172 ? > + else if (setup_info->hsfreq <= MHZ(2500)) > + ret = WRITE_PHTW(0x01020100, 0x0144016b, 0x01000172); And I believe this is Case 2 on the right... Set PHTW=H’01020100 Set PHTW=H’0104016B Set PHTW=H’01000172 Which has differences in the middle write ? I expect I'm missing something obvious there as there are lots of key differences. So perhaps those are just 'examples'. > + else > + return -EINVAL; > + > + if (ret) > + return ret; > + > + if (dsi->lanes <= 1) { > + ret = WRITE_PHTW(0x01070100, 0x010e010b); > + if (ret) > + return ret; > + } > + > + if (dsi->lanes <= 2) { > + ret = WRITE_PHTW(0x01090100, 0x010e010b); > + if (ret) > + return ret; > + } > + > + if (dsi->lanes <= 3) { > + ret = WRITE_PHTW(0x010b0100, 0x010e010b); > + if (ret) > + return ret; > + } > + > + if (setup_info->hsfreq <= MHZ(1500)) { > + ret = WRITE_PHTW(0x01010100, 0x01c0016e); > + if (ret) > + return ret; > + } > + > + return 0; > +} > + > +static int > +rcar_mipi_dsi_post_init_phtw_v4h(struct rcar_mipi_dsi *dsi, > + const struct dsi_setup_info *setup_info) > +{ > + u32 status; > + int ret; > + > + if (setup_info->hsfreq <= MHZ(1500)) { > + WRITE_PHTW(0x01020100, 0x00000180); > + > + ret = read_poll_timeout(rcar_mipi_dsi_read, status, > + status & PHTR_TEST, 2000, 10000, false, > + dsi, PHTR); > + if (ret < 0) { > + dev_err(dsi->dev, "failed to test PHTR\n"); > + return ret; > + } > + > + WRITE_PHTW(0x01010100, 0x0100016e); > + } > + > + return 0; > +} > + > /* ----------------------------------------------------------------------------- > * Hardware Setup > */ > > -struct dsi_setup_info { > - unsigned long fout; > - u16 vco_cntrl; > - u16 prop_cntrl; > - u16 hsfreqrange; > - u16 div; > - unsigned int m; > - unsigned int n; > -}; > +static void rcar_mipi_dsi_pll_calc_r8a779a0(struct rcar_mipi_dsi *dsi, > + struct clk *clk, > + unsigned long fout_target, > + struct dsi_setup_info *setup_info) > +{ > + unsigned int best_err = -1; > + unsigned long fin; > + > + fin = clk_get_rate(clk); > + > + for (unsigned int n = 3; n <= 8; n++) { > + unsigned long fpfd; > + > + fpfd = fin / n; > + > + if (fpfd < MHZ(2) || fpfd > MHZ(8)) > + continue; > + > + for (unsigned int m = 64; m <= 625; m++) { > + unsigned int err; > + u64 fout; > + > + fout = (u64)fpfd * m; > + > + if (fout < MHZ(320) || fout > MHZ(1250)) > + continue; > + > + fout = div64_u64(fout, setup_info->vclk_divider); > + > + if (fout < setup_info->clkset->min_freq || > + fout > setup_info->clkset->max_freq) > + continue; > + > + err = abs((long)(fout - fout_target) * 10000 / > + (long)fout_target); > + > + if (err < best_err) { > + setup_info->m = m; > + setup_info->n = n; > + setup_info->fout = (unsigned long)fout; > + best_err = err; > + > + if (err == 0) > + return; > + } > + } > + } > +} > + > +static void rcar_mipi_dsi_pll_calc_r8a779g0(struct rcar_mipi_dsi *dsi, > + struct clk *clk, > + unsigned long fout_target, > + struct dsi_setup_info *setup_info) > +{ > + unsigned int best_err = -1; > + unsigned long fin; > + > + fin = clk_get_rate(clk); > + > + for (unsigned int n = 1; n <= 8; n++) { > + unsigned long fpfd; > + > + fpfd = fin / n; > + > + if (fpfd < MHZ(8) || fpfd > MHZ(24)) > + continue; > + > + for (unsigned int m = 167; m <= 1000; m++) { > + unsigned int err; > + u64 fout; > + > + fout = div64_u64((u64)fpfd * m, 2); > + > + if (fout < MHZ(2000) || fout > MHZ(4000)) > + continue; > + > + fout = div64_u64(fout, setup_info->vclk_divider); > + > + if (fout < setup_info->clkset->min_freq || > + fout > setup_info->clkset->max_freq) > + continue; > + > + err = abs((long)(fout - fout_target) * 10000 / > + (long)fout_target); > + if (err < best_err) { > + setup_info->m = m; > + setup_info->n = n; > + setup_info->fout = (unsigned long)fout; > + best_err = err; > + > + if (err == 0) > + return; > + } > + } > + } > +} > > static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi, > struct clk *clk, unsigned long target, > struct dsi_setup_info *setup_info) > { > > - const struct vco_cntrl_value *vco_cntrl; > + const struct dsi_clk_config *clkset; > unsigned long fout_target; > - unsigned long fin, fout; > - unsigned long hsfreq; > - unsigned int best_err = -1; > - unsigned int divider; > - unsigned int n; > unsigned int i; > unsigned int err; > > @@ -198,70 +436,53 @@ static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi, > */ > fout_target = target * mipi_dsi_pixel_format_to_bpp(dsi->format) > / (2 * dsi->lanes); > - if (fout_target < 40000000 || fout_target > 1250000000) > + if (fout_target < MHZ(40) || fout_target > MHZ(1250)) > return; > > /* Find vco_cntrl */ > - for (vco_cntrl = vco_cntrl_table; vco_cntrl->min_freq != 0; vco_cntrl++) { > - if (fout_target > vco_cntrl->min_freq && > - fout_target <= vco_cntrl->max_freq) { > - setup_info->vco_cntrl = vco_cntrl->value; > - if (fout_target >= 1150000000) > - setup_info->prop_cntrl = 0x0c; > - else > - setup_info->prop_cntrl = 0x0b; > + for (clkset = dsi->info->clk_cfg; clkset->min_freq != 0; clkset++) { > + if (fout_target > clkset->min_freq && > + fout_target <= clkset->max_freq) { > + setup_info->clkset = clkset; > break; > } > } > > - /* Add divider */ > - setup_info->div = (setup_info->vco_cntrl & 0x30) >> 4; > + switch (dsi->info->model) { > + case RCAR_DSI_R8A779A0: > + setup_info->vclk_divider = 1 << ((clkset->vco_cntrl >> 4) & 0x3); > + rcar_mipi_dsi_pll_calc_r8a779a0(dsi, clk, fout_target, setup_info); > + break; > + > + case RCAR_DSI_R8A779G0: > + setup_info->vclk_divider = 1 << (((clkset->vco_cntrl >> 3) & 0x7) + 1); > + rcar_mipi_dsi_pll_calc_r8a779g0(dsi, clk, fout_target, setup_info); > + break; > + > + default: > + return; > + } > > /* Find hsfreqrange */ > - hsfreq = fout_target * 2; > + setup_info->hsfreq = setup_info->fout * 2; > for (i = 0; i < ARRAY_SIZE(hsfreqrange_table); i++) { > - if (hsfreqrange_table[i][0] >= hsfreq) { > + if (hsfreqrange_table[i][0] >= setup_info->hsfreq) { > setup_info->hsfreqrange = hsfreqrange_table[i][1]; > break; > } > } > > - /* > - * Calculate n and m for PLL clock > - * Following the HW manual the ranges of n and m are > - * n = [3-8] and m = [64-625] > - */ > - fin = clk_get_rate(clk); > - divider = 1 << setup_info->div; > - for (n = 3; n < 9; n++) { > - unsigned long fpfd; > - unsigned int m; > - > - fpfd = fin / n; > - > - for (m = 64; m < 626; m++) { > - fout = fpfd * m / divider; > - err = abs((long)(fout - fout_target) * 10000 / > - (long)fout_target); > - if (err < best_err) { > - setup_info->m = m - 2; > - setup_info->n = n - 1; > - setup_info->fout = fout; > - best_err = err; > - if (err == 0) > - goto done; > - } > - } > - } > + err = abs((long)(setup_info->fout - fout_target) * 10000 / (long)fout_target); > > -done: > dev_dbg(dsi->dev, > - "%pC %lu Hz -> Fout %lu Hz (target %lu Hz, error %d.%02u%%), PLL M/N/DIV %u/%u/%u\n", > - clk, fin, setup_info->fout, fout_target, best_err / 100, > - best_err % 100, setup_info->m, setup_info->n, setup_info->div); > + "Fout = %u * %lu / (2 * %u * %u) = %lu (target %lu Hz, error %d.%02u%%)\n", > + setup_info->m, clk_get_rate(clk), setup_info->n, setup_info->vclk_divider, > + setup_info->fout, fout_target, > + err / 100, err % 100); > + > dev_dbg(dsi->dev, > "vco_cntrl = 0x%x\tprop_cntrl = 0x%x\thsfreqrange = 0x%x\n", > - setup_info->vco_cntrl, setup_info->prop_cntrl, > + clkset->vco_cntrl, clkset->prop_cntrl, > setup_info->hsfreqrange); > } > > @@ -324,7 +545,7 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, > { > struct dsi_setup_info setup_info = {}; > unsigned int timeout; > - int ret, i; > + int ret; > int dsi_format; > u32 phy_setup; > u32 clockset2, clockset3; > @@ -360,10 +581,21 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, > phy_setup |= PHYSETUP_HSFREQRANGE(setup_info.hsfreqrange); > rcar_mipi_dsi_write(dsi, PHYSETUP, phy_setup); > > - for (i = 0; i < ARRAY_SIZE(phtw); i++) { > - ret = rcar_mipi_dsi_phtw_test(dsi, phtw[i]); > + switch (dsi->info->model) { > + case RCAR_DSI_R8A779A0: > + ret = rcar_mipi_dsi_init_phtw_v3u(dsi); > + if (ret < 0) > + return ret; > + break; > + > + case RCAR_DSI_R8A779G0: > + ret = rcar_mipi_dsi_init_phtw_v4h(dsi, &setup_info); > if (ret < 0) > return ret; > + break; > + > + default: > + return -ENODEV; > } > > /* PLL Clock Setting */ > @@ -371,12 +603,13 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, > rcar_mipi_dsi_set(dsi, CLOCKSET1, CLOCKSET1_SHADOW_CLEAR); > rcar_mipi_dsi_clr(dsi, CLOCKSET1, CLOCKSET1_SHADOW_CLEAR); > > - clockset2 = CLOCKSET2_M(setup_info.m) | CLOCKSET2_N(setup_info.n) > - | CLOCKSET2_VCO_CNTRL(setup_info.vco_cntrl); > - clockset3 = CLOCKSET3_PROP_CNTRL(setup_info.prop_cntrl) > - | CLOCKSET3_INT_CNTRL(0) > - | CLOCKSET3_CPBIAS_CNTRL(0x10) > - | CLOCKSET3_GMP_CNTRL(1); > + clockset2 = CLOCKSET2_M(setup_info.m - dsi->info->clockset2_m_offset) > + | CLOCKSET2_N(setup_info.n - dsi->info->clockset2_n_offset) > + | CLOCKSET2_VCO_CNTRL(setup_info.clkset->vco_cntrl); > + clockset3 = CLOCKSET3_PROP_CNTRL(setup_info.clkset->prop_cntrl) > + | CLOCKSET3_INT_CNTRL(setup_info.clkset->int_cntrl) > + | CLOCKSET3_CPBIAS_CNTRL(setup_info.clkset->cpbias_cntrl) > + | CLOCKSET3_GMP_CNTRL(setup_info.clkset->gmp_cntrl); > rcar_mipi_dsi_write(dsi, CLOCKSET2, clockset2); > rcar_mipi_dsi_write(dsi, CLOCKSET3, clockset3); > > @@ -407,10 +640,21 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, > return -ETIMEDOUT; > } > > - for (i = 0; i < ARRAY_SIZE(phtw2); i++) { > - ret = rcar_mipi_dsi_phtw_test(dsi, phtw2[i]); > + switch (dsi->info->model) { > + case RCAR_DSI_R8A779A0: > + ret = rcar_mipi_dsi_post_init_phtw_v3u(dsi); > if (ret < 0) > return ret; > + break; > + > + case RCAR_DSI_R8A779G0: > + ret = rcar_mipi_dsi_post_init_phtw_v4h(dsi, &setup_info); > + if (ret < 0) > + return ret; > + break; > + > + default: > + return -ENODEV; > } > > /* Enable DOT clock */ > @@ -427,8 +671,21 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, > dev_warn(dsi->dev, "unsupported format"); > return -EINVAL; > } > - vclkset |= VCLKSET_COLOR_RGB | VCLKSET_DIV(setup_info.div) > - | VCLKSET_LANE(dsi->lanes - 1); > + > + vclkset |= VCLKSET_COLOR_RGB | VCLKSET_LANE(dsi->lanes - 1); > + > + switch (dsi->info->model) { > + case RCAR_DSI_R8A779A0: > + vclkset |= VCLKSET_DIV_R8A779A0(__ffs(setup_info.vclk_divider)); > + break; > + > + case RCAR_DSI_R8A779G0: > + vclkset |= VCLKSET_DIV_R8A779G0(__ffs(setup_info.vclk_divider) - 1); Why is this a -1 here ? Seems an odd difference compared to the A0. > + break; > + > + default: > + return -ENODEV; > + } > > rcar_mipi_dsi_write(dsi, VCLKSET, vclkset); > > @@ -841,8 +1098,25 @@ static int rcar_mipi_dsi_remove(struct platform_device *pdev) > return 0; > } > > +static const struct rcar_mipi_dsi_device_info r8a779a0_data = { > + .model = RCAR_DSI_R8A779A0, > + .clk_cfg = dsi_clk_cfg_r8a779a0, > + .clockset2_m_offset = 2, > + .clockset2_n_offset = 1, > + > +}; > + > +static const struct rcar_mipi_dsi_device_info r8a779g0_data = { > + .model = RCAR_DSI_R8A779G0, > + .clk_cfg = dsi_clk_cfg_r8a779g0, > + .clockset2_m_offset = 0, > + .clockset2_n_offset = 1, > + > +}; > + > static const struct of_device_id rcar_mipi_dsi_of_table[] = { > - { .compatible = "renesas,r8a779a0-dsi-csi2-tx" }, > + { .compatible = "renesas,r8a779a0-dsi-csi2-tx", .data = &r8a779a0_data }, > + { .compatible = "renesas,r8a779g0-dsi-csi2-tx", .data = &r8a779g0_data }, > { } > }; > > diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h > index 2eaca54636f3..608851340acf 100644 > --- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h > +++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h > @@ -122,7 +122,8 @@ > #define VCLKSET_CKEN (1 << 16) > #define VCLKSET_COLOR_RGB (0 << 8) > #define VCLKSET_COLOR_YCC (1 << 8) > -#define VCLKSET_DIV(x) (((x) & 0x3) << 4) > +#define VCLKSET_DIV_R8A779A0(x) (((x) & 0x3) << 4) > +#define VCLKSET_DIV_R8A779G0(x) (((x) & 0x7) << 4) > #define VCLKSET_BPP_16 (0 << 2) > #define VCLKSET_BPP_18 (1 << 2) > #define VCLKSET_BPP_18L (2 << 2) > @@ -166,6 +167,9 @@ > #define PHTW_CWEN (1 << 8) > #define PHTW_TESTDIN_CODE(x) (((x) & 0xff) << 0) > > +#define PHTR 0x1038 > +#define PHTR_TEST (1 << 16) > + > #define PHTC 0x103c > #define PHTC_TESTCLR (1 << 0) > > -- > 2.34.1 >
On 17/11/2022 17:46, Kieran Bingham wrote: >> + if (ret) >> + return ret; >> + >> + if (setup_info->hsfreq <= MHZ(1000)) >> + ret = WRITE_PHTW(0x01020100, 0x01910170, 0x01020171, >> + 0x01110172); > The <=1Gbps reads: > > <=1Gbps > > Set PHTW=H’01020100 > Set PHTW=H’01010172 > Set PHTW=H’01570170 > Set PHTW=H’01060171 > Set PHTW=H’01110172 > > Is it clear why theres a difference here? What doc is that? Mine (R19UH0172EJ0054 Rev.0.54) says: Set PHTW=H’01020100 Set PHTW=H’01910170 Set PHTW=H’01020171 Set PHTW=H’01110172 Tomi
Quoting Tomi Valkeinen (2022-11-17 15:49:36) > On 17/11/2022 17:46, Kieran Bingham wrote: > >> + if (ret) > >> + return ret; > >> + > >> + if (setup_info->hsfreq <= MHZ(1000)) > >> + ret = WRITE_PHTW(0x01020100, 0x01910170, 0x01020171, > >> + 0x01110172); > > The <=1Gbps reads: > > > > <=1Gbps > > > > Set PHTW=H’01020100 > > Set PHTW=H’01010172 > > Set PHTW=H’01570170 > > Set PHTW=H’01060171 > > Set PHTW=H’01110172 > > > > Is it clear why theres a difference here? > > What doc is that? Mine (R19UH0172EJ0054 Rev.0.54) says: Hrm ... mine is R19UH0172EJ0051 ... So I guess I'm on an outdated datasheet. Which leaves me pondering if I should just wave my hand over my eyes and add a tag ... (Or see if I can dig up the later datasheet) ;-) -- Kieran > > Set PHTW=H’01020100 > Set PHTW=H’01910170 > Set PHTW=H’01020171 > Set PHTW=H’01110172 > > Tomi >
On 17/11/2022 17:46, Kieran Bingham wrote: > Quoting Tomi Valkeinen (2022-11-17 12:25:46) >> From: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> >> >> Add DSI support for r8a779g0. The main differences to r8a779a0 are in >> the PLL and PHTW setups. >> >> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> >> --- >> drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c | 484 +++++++++++++++---- >> drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h | 6 +- >> 2 files changed, 384 insertions(+), 106 deletions(-) >> >> diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c >> index a7f2b7f66a17..723c35726c38 100644 >> --- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c >> +++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c >> @@ -9,6 +9,7 @@ >> #include <linux/delay.h> >> #include <linux/io.h> >> #include <linux/iopoll.h> >> +#include <linux/math64.h> >> #include <linux/module.h> >> #include <linux/of.h> >> #include <linux/of_device.h> >> @@ -28,6 +29,20 @@ >> #include "rcar_mipi_dsi.h" >> #include "rcar_mipi_dsi_regs.h" >> >> +#define MHZ(v) ((v) * 1000000u) >> + >> +enum rcar_mipi_dsi_hw_model { >> + RCAR_DSI_R8A779A0, >> + RCAR_DSI_R8A779G0, >> +}; >> + >> +struct rcar_mipi_dsi_device_info { >> + enum rcar_mipi_dsi_hw_model model; >> + const struct dsi_clk_config *clk_cfg; >> + u8 clockset2_m_offset; >> + u8 clockset2_n_offset; >> +}; >> + >> struct rcar_mipi_dsi { >> struct device *dev; >> const struct rcar_mipi_dsi_device_info *info; >> @@ -50,6 +65,17 @@ struct rcar_mipi_dsi { >> unsigned int lanes; >> }; >> >> +struct dsi_setup_info { >> + unsigned long hsfreq; >> + u16 hsfreqrange; >> + >> + unsigned long fout; >> + u16 m; >> + u16 n; >> + u16 vclk_divider; >> + const struct dsi_clk_config *clkset; >> +}; >> + >> static inline struct rcar_mipi_dsi * >> bridge_to_rcar_mipi_dsi(struct drm_bridge *bridge) >> { >> @@ -62,22 +88,6 @@ host_to_rcar_mipi_dsi(struct mipi_dsi_host *host) >> return container_of(host, struct rcar_mipi_dsi, host); >> } >> >> -static const u32 phtw[] = { >> - 0x01020114, 0x01600115, /* General testing */ >> - 0x01030116, 0x0102011d, /* General testing */ >> - 0x011101a4, 0x018601a4, /* 1Gbps testing */ >> - 0x014201a0, 0x010001a3, /* 1Gbps testing */ >> - 0x0101011f, /* 1Gbps testing */ >> -}; >> - >> -static const u32 phtw2[] = { >> - 0x010c0130, 0x010c0140, /* General testing */ >> - 0x010c0150, 0x010c0180, /* General testing */ >> - 0x010c0190, >> - 0x010a0160, 0x010a0170, >> - 0x01800164, 0x01800174, /* 1Gbps testing */ >> -}; >> - >> static const u32 hsfreqrange_table[][2] = { >> { 80000000U, 0x00 }, { 90000000U, 0x10 }, { 100000000U, 0x20 }, >> { 110000000U, 0x30 }, { 120000000U, 0x01 }, { 130000000U, 0x11 }, >> @@ -103,24 +113,53 @@ static const u32 hsfreqrange_table[][2] = { >> { /* sentinel */ }, >> }; >> >> -struct vco_cntrl_value { >> +struct dsi_clk_config { >> u32 min_freq; >> u32 max_freq; >> - u16 value; >> + u8 vco_cntrl; >> + u8 cpbias_cntrl; >> + u8 gmp_cntrl; >> + u8 int_cntrl; >> + u8 prop_cntrl; >> }; >> >> -static const struct vco_cntrl_value vco_cntrl_table[] = { >> - { .min_freq = 40000000U, .max_freq = 55000000U, .value = 0x3f }, >> - { .min_freq = 52500000U, .max_freq = 80000000U, .value = 0x39 }, >> - { .min_freq = 80000000U, .max_freq = 110000000U, .value = 0x2f }, >> - { .min_freq = 105000000U, .max_freq = 160000000U, .value = 0x29 }, >> - { .min_freq = 160000000U, .max_freq = 220000000U, .value = 0x1f }, >> - { .min_freq = 210000000U, .max_freq = 320000000U, .value = 0x19 }, >> - { .min_freq = 320000000U, .max_freq = 440000000U, .value = 0x0f }, >> - { .min_freq = 420000000U, .max_freq = 660000000U, .value = 0x09 }, >> - { .min_freq = 630000000U, .max_freq = 1149000000U, .value = 0x03 }, >> - { .min_freq = 1100000000U, .max_freq = 1152000000U, .value = 0x01 }, >> - { .min_freq = 1150000000U, .max_freq = 1250000000U, .value = 0x01 }, >> +static const struct dsi_clk_config dsi_clk_cfg_r8a779a0[] = { >> + { 40000000u, 55000000u, 0x3f, 0x10, 0x01, 0x00, 0x0b }, >> + { 52500000u, 80000000u, 0x39, 0x10, 0x01, 0x00, 0x0b }, >> + { 80000000u, 110000000u, 0x2f, 0x10, 0x01, 0x00, 0x0b }, >> + { 105000000u, 160000000u, 0x29, 0x10, 0x01, 0x00, 0x0b }, >> + { 160000000u, 220000000u, 0x1f, 0x10, 0x01, 0x00, 0x0b }, >> + { 210000000u, 320000000u, 0x19, 0x10, 0x01, 0x00, 0x0b }, >> + { 320000000u, 440000000u, 0x0f, 0x10, 0x01, 0x00, 0x0b }, >> + { 420000000u, 660000000u, 0x09, 0x10, 0x01, 0x00, 0x0b }, >> + { 630000000u, 1149000000u, 0x03, 0x10, 0x01, 0x00, 0x0b }, >> + { 1100000000u, 1152000000u, 0x01, 0x10, 0x01, 0x00, 0x0b }, >> + { 1150000000u, 1250000000u, 0x01, 0x10, 0x01, 0x00, 0x0c }, > > Sigh ... is it this one 0x0c value that means we need to keep all these > entries repeated ? :-S > > If it weren't for that, it seems we could keep just two sets of >> + u8 cpbias_cntrl; >> + u8 gmp_cntrl; >> + u8 int_cntrl; >> + u8 prop_cntrl; > > One for each of the 9a0, and the 9g0... > > But this is fine, and I guess the implication is there may be other > future differences to come in other platforms. > > It could be refactored then when we have more visibility. Yes, it's not so nice. And afaiu some of these values should really be solved dynamically in the code. But the docs list these tables and don't explain how to come up with those values, so... I think having these tables is the safest way. >> @@ -427,8 +671,21 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, >> dev_warn(dsi->dev, "unsupported format"); >> return -EINVAL; >> } >> - vclkset |= VCLKSET_COLOR_RGB | VCLKSET_DIV(setup_info.div) >> - | VCLKSET_LANE(dsi->lanes - 1); >> + >> + vclkset |= VCLKSET_COLOR_RGB | VCLKSET_LANE(dsi->lanes - 1); >> + >> + switch (dsi->info->model) { >> + case RCAR_DSI_R8A779A0: >> + vclkset |= VCLKSET_DIV_R8A779A0(__ffs(setup_info.vclk_divider)); >> + break; >> + >> + case RCAR_DSI_R8A779G0: >> + vclkset |= VCLKSET_DIV_R8A779G0(__ffs(setup_info.vclk_divider) - 1); > > Why is this a -1 here ? Seems an odd difference compared to the A0. You need to ask the HW designers =). That's how the register is on G0. Field value of 0 means divided by 2. Tomi
On Tue, Nov 22, 2022 at 10:50:30AM +0200, Tomi Valkeinen wrote: > On 17/11/2022 17:46, Kieran Bingham wrote: > > Quoting Tomi Valkeinen (2022-11-17 12:25:46) > >> From: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> > >> > >> Add DSI support for r8a779g0. The main differences to r8a779a0 are in > >> the PLL and PHTW setups. > >> > >> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> > >> --- > >> drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c | 484 +++++++++++++++---- > >> drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h | 6 +- > >> 2 files changed, 384 insertions(+), 106 deletions(-) > >> > >> diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c > >> index a7f2b7f66a17..723c35726c38 100644 > >> --- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c > >> +++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c > >> @@ -9,6 +9,7 @@ > >> #include <linux/delay.h> > >> #include <linux/io.h> > >> #include <linux/iopoll.h> > >> +#include <linux/math64.h> > >> #include <linux/module.h> > >> #include <linux/of.h> > >> #include <linux/of_device.h> > >> @@ -28,6 +29,20 @@ > >> #include "rcar_mipi_dsi.h" > >> #include "rcar_mipi_dsi_regs.h" > >> > >> +#define MHZ(v) ((v) * 1000000u) > >> + > >> +enum rcar_mipi_dsi_hw_model { > >> + RCAR_DSI_R8A779A0, > >> + RCAR_DSI_R8A779G0, > >> +}; > >> + > >> +struct rcar_mipi_dsi_device_info { > >> + enum rcar_mipi_dsi_hw_model model; > >> + const struct dsi_clk_config *clk_cfg; > >> + u8 clockset2_m_offset; > >> + u8 clockset2_n_offset; > >> +}; > >> + > >> struct rcar_mipi_dsi { > >> struct device *dev; > >> const struct rcar_mipi_dsi_device_info *info; > >> @@ -50,6 +65,17 @@ struct rcar_mipi_dsi { > >> unsigned int lanes; > >> }; > >> > >> +struct dsi_setup_info { > >> + unsigned long hsfreq; > >> + u16 hsfreqrange; > >> + > >> + unsigned long fout; > >> + u16 m; > >> + u16 n; > >> + u16 vclk_divider; > >> + const struct dsi_clk_config *clkset; > >> +}; > >> + > >> static inline struct rcar_mipi_dsi * > >> bridge_to_rcar_mipi_dsi(struct drm_bridge *bridge) > >> { > >> @@ -62,22 +88,6 @@ host_to_rcar_mipi_dsi(struct mipi_dsi_host *host) > >> return container_of(host, struct rcar_mipi_dsi, host); > >> } > >> > >> -static const u32 phtw[] = { > >> - 0x01020114, 0x01600115, /* General testing */ > >> - 0x01030116, 0x0102011d, /* General testing */ > >> - 0x011101a4, 0x018601a4, /* 1Gbps testing */ > >> - 0x014201a0, 0x010001a3, /* 1Gbps testing */ > >> - 0x0101011f, /* 1Gbps testing */ > >> -}; > >> - > >> -static const u32 phtw2[] = { > >> - 0x010c0130, 0x010c0140, /* General testing */ > >> - 0x010c0150, 0x010c0180, /* General testing */ > >> - 0x010c0190, > >> - 0x010a0160, 0x010a0170, > >> - 0x01800164, 0x01800174, /* 1Gbps testing */ > >> -}; > >> - > >> static const u32 hsfreqrange_table[][2] = { > >> { 80000000U, 0x00 }, { 90000000U, 0x10 }, { 100000000U, 0x20 }, > >> { 110000000U, 0x30 }, { 120000000U, 0x01 }, { 130000000U, 0x11 }, > >> @@ -103,24 +113,53 @@ static const u32 hsfreqrange_table[][2] = { > >> { /* sentinel */ }, > >> }; > >> > >> -struct vco_cntrl_value { > >> +struct dsi_clk_config { > >> u32 min_freq; > >> u32 max_freq; > >> - u16 value; > >> + u8 vco_cntrl; > >> + u8 cpbias_cntrl; > >> + u8 gmp_cntrl; > >> + u8 int_cntrl; > >> + u8 prop_cntrl; > >> }; > >> > >> -static const struct vco_cntrl_value vco_cntrl_table[] = { > >> - { .min_freq = 40000000U, .max_freq = 55000000U, .value = 0x3f }, > >> - { .min_freq = 52500000U, .max_freq = 80000000U, .value = 0x39 }, > >> - { .min_freq = 80000000U, .max_freq = 110000000U, .value = 0x2f }, > >> - { .min_freq = 105000000U, .max_freq = 160000000U, .value = 0x29 }, > >> - { .min_freq = 160000000U, .max_freq = 220000000U, .value = 0x1f }, > >> - { .min_freq = 210000000U, .max_freq = 320000000U, .value = 0x19 }, > >> - { .min_freq = 320000000U, .max_freq = 440000000U, .value = 0x0f }, > >> - { .min_freq = 420000000U, .max_freq = 660000000U, .value = 0x09 }, > >> - { .min_freq = 630000000U, .max_freq = 1149000000U, .value = 0x03 }, > >> - { .min_freq = 1100000000U, .max_freq = 1152000000U, .value = 0x01 }, > >> - { .min_freq = 1150000000U, .max_freq = 1250000000U, .value = 0x01 }, > >> +static const struct dsi_clk_config dsi_clk_cfg_r8a779a0[] = { > >> + { 40000000u, 55000000u, 0x3f, 0x10, 0x01, 0x00, 0x0b }, > >> + { 52500000u, 80000000u, 0x39, 0x10, 0x01, 0x00, 0x0b }, > >> + { 80000000u, 110000000u, 0x2f, 0x10, 0x01, 0x00, 0x0b }, > >> + { 105000000u, 160000000u, 0x29, 0x10, 0x01, 0x00, 0x0b }, > >> + { 160000000u, 220000000u, 0x1f, 0x10, 0x01, 0x00, 0x0b }, > >> + { 210000000u, 320000000u, 0x19, 0x10, 0x01, 0x00, 0x0b }, > >> + { 320000000u, 440000000u, 0x0f, 0x10, 0x01, 0x00, 0x0b }, > >> + { 420000000u, 660000000u, 0x09, 0x10, 0x01, 0x00, 0x0b }, > >> + { 630000000u, 1149000000u, 0x03, 0x10, 0x01, 0x00, 0x0b }, > >> + { 1100000000u, 1152000000u, 0x01, 0x10, 0x01, 0x00, 0x0b }, > >> + { 1150000000u, 1250000000u, 0x01, 0x10, 0x01, 0x00, 0x0c }, > > > > Sigh ... is it this one 0x0c value that means we need to keep all these > > entries repeated ? :-S > > > > If it weren't for that, it seems we could keep just two sets of > >> + u8 cpbias_cntrl; > >> + u8 gmp_cntrl; > >> + u8 int_cntrl; > >> + u8 prop_cntrl; > > > > One for each of the 9a0, and the 9g0... > > > > But this is fine, and I guess the implication is there may be other > > future differences to come in other platforms. > > > > It could be refactored then when we have more visibility. > > Yes, it's not so nice. And afaiu some of these values should really be > solved dynamically in the code. But the docs list these tables and don't > explain how to come up with those values, so... I think having these > tables is the safest way. We could drop the cpbias_cntrl, gmp_cntrl and int_cntrl fields and set them based on the IP version. > >> @@ -427,8 +671,21 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, > >> dev_warn(dsi->dev, "unsupported format"); > >> return -EINVAL; > >> } > >> - vclkset |= VCLKSET_COLOR_RGB | VCLKSET_DIV(setup_info.div) > >> - | VCLKSET_LANE(dsi->lanes - 1); > >> + > >> + vclkset |= VCLKSET_COLOR_RGB | VCLKSET_LANE(dsi->lanes - 1); > >> + > >> + switch (dsi->info->model) { > >> + case RCAR_DSI_R8A779A0: > >> + vclkset |= VCLKSET_DIV_R8A779A0(__ffs(setup_info.vclk_divider)); > >> + break; > >> + > >> + case RCAR_DSI_R8A779G0: > >> + vclkset |= VCLKSET_DIV_R8A779G0(__ffs(setup_info.vclk_divider) - 1); > > > > Why is this a -1 here ? Seems an odd difference compared to the A0. > > You need to ask the HW designers =). That's how the register is on G0. > Field value of 0 means divided by 2.
On 29/11/2022 02:43, Laurent Pinchart wrote: > On Tue, Nov 22, 2022 at 10:50:30AM +0200, Tomi Valkeinen wrote: >> On 17/11/2022 17:46, Kieran Bingham wrote: >>> Quoting Tomi Valkeinen (2022-11-17 12:25:46) >>>> From: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> >>>> >>>> Add DSI support for r8a779g0. The main differences to r8a779a0 are in >>>> the PLL and PHTW setups. >>>> >>>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> >>>> --- >>>> drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c | 484 +++++++++++++++---- >>>> drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h | 6 +- >>>> 2 files changed, 384 insertions(+), 106 deletions(-) >>>> >>>> diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c >>>> index a7f2b7f66a17..723c35726c38 100644 >>>> --- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c >>>> +++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c >>>> @@ -9,6 +9,7 @@ >>>> #include <linux/delay.h> >>>> #include <linux/io.h> >>>> #include <linux/iopoll.h> >>>> +#include <linux/math64.h> >>>> #include <linux/module.h> >>>> #include <linux/of.h> >>>> #include <linux/of_device.h> >>>> @@ -28,6 +29,20 @@ >>>> #include "rcar_mipi_dsi.h" >>>> #include "rcar_mipi_dsi_regs.h" >>>> >>>> +#define MHZ(v) ((v) * 1000000u) >>>> + >>>> +enum rcar_mipi_dsi_hw_model { >>>> + RCAR_DSI_R8A779A0, >>>> + RCAR_DSI_R8A779G0, >>>> +}; >>>> + >>>> +struct rcar_mipi_dsi_device_info { >>>> + enum rcar_mipi_dsi_hw_model model; >>>> + const struct dsi_clk_config *clk_cfg; >>>> + u8 clockset2_m_offset; >>>> + u8 clockset2_n_offset; >>>> +}; >>>> + >>>> struct rcar_mipi_dsi { >>>> struct device *dev; >>>> const struct rcar_mipi_dsi_device_info *info; >>>> @@ -50,6 +65,17 @@ struct rcar_mipi_dsi { >>>> unsigned int lanes; >>>> }; >>>> >>>> +struct dsi_setup_info { >>>> + unsigned long hsfreq; >>>> + u16 hsfreqrange; >>>> + >>>> + unsigned long fout; >>>> + u16 m; >>>> + u16 n; >>>> + u16 vclk_divider; >>>> + const struct dsi_clk_config *clkset; >>>> +}; >>>> + >>>> static inline struct rcar_mipi_dsi * >>>> bridge_to_rcar_mipi_dsi(struct drm_bridge *bridge) >>>> { >>>> @@ -62,22 +88,6 @@ host_to_rcar_mipi_dsi(struct mipi_dsi_host *host) >>>> return container_of(host, struct rcar_mipi_dsi, host); >>>> } >>>> >>>> -static const u32 phtw[] = { >>>> - 0x01020114, 0x01600115, /* General testing */ >>>> - 0x01030116, 0x0102011d, /* General testing */ >>>> - 0x011101a4, 0x018601a4, /* 1Gbps testing */ >>>> - 0x014201a0, 0x010001a3, /* 1Gbps testing */ >>>> - 0x0101011f, /* 1Gbps testing */ >>>> -}; >>>> - >>>> -static const u32 phtw2[] = { >>>> - 0x010c0130, 0x010c0140, /* General testing */ >>>> - 0x010c0150, 0x010c0180, /* General testing */ >>>> - 0x010c0190, >>>> - 0x010a0160, 0x010a0170, >>>> - 0x01800164, 0x01800174, /* 1Gbps testing */ >>>> -}; >>>> - >>>> static const u32 hsfreqrange_table[][2] = { >>>> { 80000000U, 0x00 }, { 90000000U, 0x10 }, { 100000000U, 0x20 }, >>>> { 110000000U, 0x30 }, { 120000000U, 0x01 }, { 130000000U, 0x11 }, >>>> @@ -103,24 +113,53 @@ static const u32 hsfreqrange_table[][2] = { >>>> { /* sentinel */ }, >>>> }; >>>> >>>> -struct vco_cntrl_value { >>>> +struct dsi_clk_config { >>>> u32 min_freq; >>>> u32 max_freq; >>>> - u16 value; >>>> + u8 vco_cntrl; >>>> + u8 cpbias_cntrl; >>>> + u8 gmp_cntrl; >>>> + u8 int_cntrl; >>>> + u8 prop_cntrl; >>>> }; >>>> >>>> -static const struct vco_cntrl_value vco_cntrl_table[] = { >>>> - { .min_freq = 40000000U, .max_freq = 55000000U, .value = 0x3f }, >>>> - { .min_freq = 52500000U, .max_freq = 80000000U, .value = 0x39 }, >>>> - { .min_freq = 80000000U, .max_freq = 110000000U, .value = 0x2f }, >>>> - { .min_freq = 105000000U, .max_freq = 160000000U, .value = 0x29 }, >>>> - { .min_freq = 160000000U, .max_freq = 220000000U, .value = 0x1f }, >>>> - { .min_freq = 210000000U, .max_freq = 320000000U, .value = 0x19 }, >>>> - { .min_freq = 320000000U, .max_freq = 440000000U, .value = 0x0f }, >>>> - { .min_freq = 420000000U, .max_freq = 660000000U, .value = 0x09 }, >>>> - { .min_freq = 630000000U, .max_freq = 1149000000U, .value = 0x03 }, >>>> - { .min_freq = 1100000000U, .max_freq = 1152000000U, .value = 0x01 }, >>>> - { .min_freq = 1150000000U, .max_freq = 1250000000U, .value = 0x01 }, >>>> +static const struct dsi_clk_config dsi_clk_cfg_r8a779a0[] = { >>>> + { 40000000u, 55000000u, 0x3f, 0x10, 0x01, 0x00, 0x0b }, >>>> + { 52500000u, 80000000u, 0x39, 0x10, 0x01, 0x00, 0x0b }, >>>> + { 80000000u, 110000000u, 0x2f, 0x10, 0x01, 0x00, 0x0b }, >>>> + { 105000000u, 160000000u, 0x29, 0x10, 0x01, 0x00, 0x0b }, >>>> + { 160000000u, 220000000u, 0x1f, 0x10, 0x01, 0x00, 0x0b }, >>>> + { 210000000u, 320000000u, 0x19, 0x10, 0x01, 0x00, 0x0b }, >>>> + { 320000000u, 440000000u, 0x0f, 0x10, 0x01, 0x00, 0x0b }, >>>> + { 420000000u, 660000000u, 0x09, 0x10, 0x01, 0x00, 0x0b }, >>>> + { 630000000u, 1149000000u, 0x03, 0x10, 0x01, 0x00, 0x0b }, >>>> + { 1100000000u, 1152000000u, 0x01, 0x10, 0x01, 0x00, 0x0b }, >>>> + { 1150000000u, 1250000000u, 0x01, 0x10, 0x01, 0x00, 0x0c }, >>> >>> Sigh ... is it this one 0x0c value that means we need to keep all these >>> entries repeated ? :-S >>> >>> If it weren't for that, it seems we could keep just two sets of >>>> + u8 cpbias_cntrl; >>>> + u8 gmp_cntrl; >>>> + u8 int_cntrl; >>>> + u8 prop_cntrl; >>> >>> One for each of the 9a0, and the 9g0... >>> >>> But this is fine, and I guess the implication is there may be other >>> future differences to come in other platforms. >>> >>> It could be refactored then when we have more visibility. >> >> Yes, it's not so nice. And afaiu some of these values should really be >> solved dynamically in the code. But the docs list these tables and don't >> explain how to come up with those values, so... I think having these >> tables is the safest way. > > We could drop the cpbias_cntrl, gmp_cntrl and int_cntrl fields and set > them based on the IP version. We could, but I have no idea what those do, and don't know if there may be a case (for a future SoC or if the optimal values are updated for current ones) where multiple values are used on a single soc. So I thought that it's better to keep them aligned to the HW docs (i.e. together in a table). Tomi
diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c index a7f2b7f66a17..723c35726c38 100644 --- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c +++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c @@ -9,6 +9,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/iopoll.h> +#include <linux/math64.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> @@ -28,6 +29,20 @@ #include "rcar_mipi_dsi.h" #include "rcar_mipi_dsi_regs.h" +#define MHZ(v) ((v) * 1000000u) + +enum rcar_mipi_dsi_hw_model { + RCAR_DSI_R8A779A0, + RCAR_DSI_R8A779G0, +}; + +struct rcar_mipi_dsi_device_info { + enum rcar_mipi_dsi_hw_model model; + const struct dsi_clk_config *clk_cfg; + u8 clockset2_m_offset; + u8 clockset2_n_offset; +}; + struct rcar_mipi_dsi { struct device *dev; const struct rcar_mipi_dsi_device_info *info; @@ -50,6 +65,17 @@ struct rcar_mipi_dsi { unsigned int lanes; }; +struct dsi_setup_info { + unsigned long hsfreq; + u16 hsfreqrange; + + unsigned long fout; + u16 m; + u16 n; + u16 vclk_divider; + const struct dsi_clk_config *clkset; +}; + static inline struct rcar_mipi_dsi * bridge_to_rcar_mipi_dsi(struct drm_bridge *bridge) { @@ -62,22 +88,6 @@ host_to_rcar_mipi_dsi(struct mipi_dsi_host *host) return container_of(host, struct rcar_mipi_dsi, host); } -static const u32 phtw[] = { - 0x01020114, 0x01600115, /* General testing */ - 0x01030116, 0x0102011d, /* General testing */ - 0x011101a4, 0x018601a4, /* 1Gbps testing */ - 0x014201a0, 0x010001a3, /* 1Gbps testing */ - 0x0101011f, /* 1Gbps testing */ -}; - -static const u32 phtw2[] = { - 0x010c0130, 0x010c0140, /* General testing */ - 0x010c0150, 0x010c0180, /* General testing */ - 0x010c0190, - 0x010a0160, 0x010a0170, - 0x01800164, 0x01800174, /* 1Gbps testing */ -}; - static const u32 hsfreqrange_table[][2] = { { 80000000U, 0x00 }, { 90000000U, 0x10 }, { 100000000U, 0x20 }, { 110000000U, 0x30 }, { 120000000U, 0x01 }, { 130000000U, 0x11 }, @@ -103,24 +113,53 @@ static const u32 hsfreqrange_table[][2] = { { /* sentinel */ }, }; -struct vco_cntrl_value { +struct dsi_clk_config { u32 min_freq; u32 max_freq; - u16 value; + u8 vco_cntrl; + u8 cpbias_cntrl; + u8 gmp_cntrl; + u8 int_cntrl; + u8 prop_cntrl; }; -static const struct vco_cntrl_value vco_cntrl_table[] = { - { .min_freq = 40000000U, .max_freq = 55000000U, .value = 0x3f }, - { .min_freq = 52500000U, .max_freq = 80000000U, .value = 0x39 }, - { .min_freq = 80000000U, .max_freq = 110000000U, .value = 0x2f }, - { .min_freq = 105000000U, .max_freq = 160000000U, .value = 0x29 }, - { .min_freq = 160000000U, .max_freq = 220000000U, .value = 0x1f }, - { .min_freq = 210000000U, .max_freq = 320000000U, .value = 0x19 }, - { .min_freq = 320000000U, .max_freq = 440000000U, .value = 0x0f }, - { .min_freq = 420000000U, .max_freq = 660000000U, .value = 0x09 }, - { .min_freq = 630000000U, .max_freq = 1149000000U, .value = 0x03 }, - { .min_freq = 1100000000U, .max_freq = 1152000000U, .value = 0x01 }, - { .min_freq = 1150000000U, .max_freq = 1250000000U, .value = 0x01 }, +static const struct dsi_clk_config dsi_clk_cfg_r8a779a0[] = { + { 40000000u, 55000000u, 0x3f, 0x10, 0x01, 0x00, 0x0b }, + { 52500000u, 80000000u, 0x39, 0x10, 0x01, 0x00, 0x0b }, + { 80000000u, 110000000u, 0x2f, 0x10, 0x01, 0x00, 0x0b }, + { 105000000u, 160000000u, 0x29, 0x10, 0x01, 0x00, 0x0b }, + { 160000000u, 220000000u, 0x1f, 0x10, 0x01, 0x00, 0x0b }, + { 210000000u, 320000000u, 0x19, 0x10, 0x01, 0x00, 0x0b }, + { 320000000u, 440000000u, 0x0f, 0x10, 0x01, 0x00, 0x0b }, + { 420000000u, 660000000u, 0x09, 0x10, 0x01, 0x00, 0x0b }, + { 630000000u, 1149000000u, 0x03, 0x10, 0x01, 0x00, 0x0b }, + { 1100000000u, 1152000000u, 0x01, 0x10, 0x01, 0x00, 0x0b }, + { 1150000000u, 1250000000u, 0x01, 0x10, 0x01, 0x00, 0x0c }, + { /* sentinel */ }, +}; + +static const struct dsi_clk_config dsi_clk_cfg_r8a779g0[] = { + { 40000000u, 45310000u, 0x2b, 0x00, 0x00, 0x08, 0x0a }, + { 45310000u, 54660000u, 0x28, 0x00, 0x00, 0x08, 0x0a }, + { 54660000u, 62500000u, 0x28, 0x00, 0x00, 0x08, 0x0a }, + { 62500000u, 75000000u, 0x27, 0x00, 0x00, 0x08, 0x0a }, + { 75000000u, 90630000u, 0x23, 0x00, 0x00, 0x08, 0x0a }, + { 90630000u, 109370000u, 0x20, 0x00, 0x00, 0x08, 0x0a }, + { 109370000u, 125000000u, 0x20, 0x00, 0x00, 0x08, 0x0a }, + { 125000000u, 150000000u, 0x1f, 0x00, 0x00, 0x08, 0x0a }, + { 150000000u, 181250000u, 0x1b, 0x00, 0x00, 0x08, 0x0a }, + { 181250000u, 218750000u, 0x18, 0x00, 0x00, 0x08, 0x0a }, + { 218750000u, 250000000u, 0x18, 0x00, 0x00, 0x08, 0x0a }, + { 250000000u, 300000000u, 0x17, 0x00, 0x00, 0x08, 0x0a }, + { 300000000u, 362500000u, 0x13, 0x00, 0x00, 0x08, 0x0a }, + { 362500000u, 455480000u, 0x10, 0x00, 0x00, 0x08, 0x0a }, + { 455480000u, 500000000u, 0x10, 0x00, 0x00, 0x08, 0x0a }, + { 500000000u, 600000000u, 0x0f, 0x00, 0x00, 0x08, 0x0a }, + { 600000000u, 725000000u, 0x0b, 0x00, 0x00, 0x08, 0x0a }, + { 725000000u, 875000000u, 0x08, 0x00, 0x00, 0x08, 0x0a }, + { 875000000u, 1000000000u, 0x08, 0x00, 0x00, 0x08, 0x0a }, + { 1000000000u, 1200000000u, 0x07, 0x00, 0x00, 0x08, 0x0a }, + { 1200000000u, 1250000000u, 0x03, 0x00, 0x00, 0x08, 0x0a }, { /* sentinel */ }, }; @@ -144,7 +183,7 @@ static void rcar_mipi_dsi_set(struct rcar_mipi_dsi *dsi, u32 reg, u32 set) rcar_mipi_dsi_write(dsi, reg, rcar_mipi_dsi_read(dsi, reg) | set); } -static int rcar_mipi_dsi_phtw_test(struct rcar_mipi_dsi *dsi, u32 phtw) +static int rcar_mipi_dsi_write_phtw(struct rcar_mipi_dsi *dsi, u32 phtw) { u32 status; int ret; @@ -163,32 +202,231 @@ static int rcar_mipi_dsi_phtw_test(struct rcar_mipi_dsi *dsi, u32 phtw) return ret; } +static int rcar_mipi_dsi_write_phtw_arr(struct rcar_mipi_dsi *dsi, + const u32 *phtw, unsigned int size) +{ + for (unsigned int i = 0; i < size; i++) { + int ret = rcar_mipi_dsi_write_phtw(dsi, phtw[i]); + + if (ret < 0) + return ret; + } + + return 0; +} + +#define WRITE_PHTW(...) \ + ({ \ + static const u32 phtw[] = { __VA_ARGS__ }; \ + int ret; \ + ret = rcar_mipi_dsi_write_phtw_arr(dsi, phtw, \ + ARRAY_SIZE(phtw)); \ + ret; \ + }) + +static int rcar_mipi_dsi_init_phtw_v3u(struct rcar_mipi_dsi *dsi) +{ + return WRITE_PHTW(0x01020114, 0x01600115, 0x01030116, 0x0102011d, + 0x011101a4, 0x018601a4, 0x014201a0, 0x010001a3, + 0x0101011f); +} + +static int rcar_mipi_dsi_post_init_phtw_v3u(struct rcar_mipi_dsi *dsi) +{ + return WRITE_PHTW(0x010c0130, 0x010c0140, 0x010c0150, 0x010c0180, + 0x010c0190, 0x010a0160, 0x010a0170, 0x01800164, + 0x01800174); +} + +static int rcar_mipi_dsi_init_phtw_v4h(struct rcar_mipi_dsi *dsi, + const struct dsi_setup_info *setup_info) +{ + int ret; + + if (setup_info->hsfreq < MHZ(450)) { + ret = WRITE_PHTW(0x01010100, 0x011b01ac); + if (ret) + return ret; + } + + ret = WRITE_PHTW(0x01010100, 0x01030173, 0x01000174, 0x01500175, + 0x01030176, 0x01040166, 0x010201ad); + if (ret) + return ret; + + if (setup_info->hsfreq <= MHZ(1000)) + ret = WRITE_PHTW(0x01020100, 0x01910170, 0x01020171, + 0x01110172); + else if (setup_info->hsfreq <= MHZ(1500)) + ret = WRITE_PHTW(0x01020100, 0x01980170, 0x01030171, + 0x01100172); + else if (setup_info->hsfreq <= MHZ(2500)) + ret = WRITE_PHTW(0x01020100, 0x0144016b, 0x01000172); + else + return -EINVAL; + + if (ret) + return ret; + + if (dsi->lanes <= 1) { + ret = WRITE_PHTW(0x01070100, 0x010e010b); + if (ret) + return ret; + } + + if (dsi->lanes <= 2) { + ret = WRITE_PHTW(0x01090100, 0x010e010b); + if (ret) + return ret; + } + + if (dsi->lanes <= 3) { + ret = WRITE_PHTW(0x010b0100, 0x010e010b); + if (ret) + return ret; + } + + if (setup_info->hsfreq <= MHZ(1500)) { + ret = WRITE_PHTW(0x01010100, 0x01c0016e); + if (ret) + return ret; + } + + return 0; +} + +static int +rcar_mipi_dsi_post_init_phtw_v4h(struct rcar_mipi_dsi *dsi, + const struct dsi_setup_info *setup_info) +{ + u32 status; + int ret; + + if (setup_info->hsfreq <= MHZ(1500)) { + WRITE_PHTW(0x01020100, 0x00000180); + + ret = read_poll_timeout(rcar_mipi_dsi_read, status, + status & PHTR_TEST, 2000, 10000, false, + dsi, PHTR); + if (ret < 0) { + dev_err(dsi->dev, "failed to test PHTR\n"); + return ret; + } + + WRITE_PHTW(0x01010100, 0x0100016e); + } + + return 0; +} + /* ----------------------------------------------------------------------------- * Hardware Setup */ -struct dsi_setup_info { - unsigned long fout; - u16 vco_cntrl; - u16 prop_cntrl; - u16 hsfreqrange; - u16 div; - unsigned int m; - unsigned int n; -}; +static void rcar_mipi_dsi_pll_calc_r8a779a0(struct rcar_mipi_dsi *dsi, + struct clk *clk, + unsigned long fout_target, + struct dsi_setup_info *setup_info) +{ + unsigned int best_err = -1; + unsigned long fin; + + fin = clk_get_rate(clk); + + for (unsigned int n = 3; n <= 8; n++) { + unsigned long fpfd; + + fpfd = fin / n; + + if (fpfd < MHZ(2) || fpfd > MHZ(8)) + continue; + + for (unsigned int m = 64; m <= 625; m++) { + unsigned int err; + u64 fout; + + fout = (u64)fpfd * m; + + if (fout < MHZ(320) || fout > MHZ(1250)) + continue; + + fout = div64_u64(fout, setup_info->vclk_divider); + + if (fout < setup_info->clkset->min_freq || + fout > setup_info->clkset->max_freq) + continue; + + err = abs((long)(fout - fout_target) * 10000 / + (long)fout_target); + + if (err < best_err) { + setup_info->m = m; + setup_info->n = n; + setup_info->fout = (unsigned long)fout; + best_err = err; + + if (err == 0) + return; + } + } + } +} + +static void rcar_mipi_dsi_pll_calc_r8a779g0(struct rcar_mipi_dsi *dsi, + struct clk *clk, + unsigned long fout_target, + struct dsi_setup_info *setup_info) +{ + unsigned int best_err = -1; + unsigned long fin; + + fin = clk_get_rate(clk); + + for (unsigned int n = 1; n <= 8; n++) { + unsigned long fpfd; + + fpfd = fin / n; + + if (fpfd < MHZ(8) || fpfd > MHZ(24)) + continue; + + for (unsigned int m = 167; m <= 1000; m++) { + unsigned int err; + u64 fout; + + fout = div64_u64((u64)fpfd * m, 2); + + if (fout < MHZ(2000) || fout > MHZ(4000)) + continue; + + fout = div64_u64(fout, setup_info->vclk_divider); + + if (fout < setup_info->clkset->min_freq || + fout > setup_info->clkset->max_freq) + continue; + + err = abs((long)(fout - fout_target) * 10000 / + (long)fout_target); + if (err < best_err) { + setup_info->m = m; + setup_info->n = n; + setup_info->fout = (unsigned long)fout; + best_err = err; + + if (err == 0) + return; + } + } + } +} static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi, struct clk *clk, unsigned long target, struct dsi_setup_info *setup_info) { - const struct vco_cntrl_value *vco_cntrl; + const struct dsi_clk_config *clkset; unsigned long fout_target; - unsigned long fin, fout; - unsigned long hsfreq; - unsigned int best_err = -1; - unsigned int divider; - unsigned int n; unsigned int i; unsigned int err; @@ -198,70 +436,53 @@ static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi, */ fout_target = target * mipi_dsi_pixel_format_to_bpp(dsi->format) / (2 * dsi->lanes); - if (fout_target < 40000000 || fout_target > 1250000000) + if (fout_target < MHZ(40) || fout_target > MHZ(1250)) return; /* Find vco_cntrl */ - for (vco_cntrl = vco_cntrl_table; vco_cntrl->min_freq != 0; vco_cntrl++) { - if (fout_target > vco_cntrl->min_freq && - fout_target <= vco_cntrl->max_freq) { - setup_info->vco_cntrl = vco_cntrl->value; - if (fout_target >= 1150000000) - setup_info->prop_cntrl = 0x0c; - else - setup_info->prop_cntrl = 0x0b; + for (clkset = dsi->info->clk_cfg; clkset->min_freq != 0; clkset++) { + if (fout_target > clkset->min_freq && + fout_target <= clkset->max_freq) { + setup_info->clkset = clkset; break; } } - /* Add divider */ - setup_info->div = (setup_info->vco_cntrl & 0x30) >> 4; + switch (dsi->info->model) { + case RCAR_DSI_R8A779A0: + setup_info->vclk_divider = 1 << ((clkset->vco_cntrl >> 4) & 0x3); + rcar_mipi_dsi_pll_calc_r8a779a0(dsi, clk, fout_target, setup_info); + break; + + case RCAR_DSI_R8A779G0: + setup_info->vclk_divider = 1 << (((clkset->vco_cntrl >> 3) & 0x7) + 1); + rcar_mipi_dsi_pll_calc_r8a779g0(dsi, clk, fout_target, setup_info); + break; + + default: + return; + } /* Find hsfreqrange */ - hsfreq = fout_target * 2; + setup_info->hsfreq = setup_info->fout * 2; for (i = 0; i < ARRAY_SIZE(hsfreqrange_table); i++) { - if (hsfreqrange_table[i][0] >= hsfreq) { + if (hsfreqrange_table[i][0] >= setup_info->hsfreq) { setup_info->hsfreqrange = hsfreqrange_table[i][1]; break; } } - /* - * Calculate n and m for PLL clock - * Following the HW manual the ranges of n and m are - * n = [3-8] and m = [64-625] - */ - fin = clk_get_rate(clk); - divider = 1 << setup_info->div; - for (n = 3; n < 9; n++) { - unsigned long fpfd; - unsigned int m; - - fpfd = fin / n; - - for (m = 64; m < 626; m++) { - fout = fpfd * m / divider; - err = abs((long)(fout - fout_target) * 10000 / - (long)fout_target); - if (err < best_err) { - setup_info->m = m - 2; - setup_info->n = n - 1; - setup_info->fout = fout; - best_err = err; - if (err == 0) - goto done; - } - } - } + err = abs((long)(setup_info->fout - fout_target) * 10000 / (long)fout_target); -done: dev_dbg(dsi->dev, - "%pC %lu Hz -> Fout %lu Hz (target %lu Hz, error %d.%02u%%), PLL M/N/DIV %u/%u/%u\n", - clk, fin, setup_info->fout, fout_target, best_err / 100, - best_err % 100, setup_info->m, setup_info->n, setup_info->div); + "Fout = %u * %lu / (2 * %u * %u) = %lu (target %lu Hz, error %d.%02u%%)\n", + setup_info->m, clk_get_rate(clk), setup_info->n, setup_info->vclk_divider, + setup_info->fout, fout_target, + err / 100, err % 100); + dev_dbg(dsi->dev, "vco_cntrl = 0x%x\tprop_cntrl = 0x%x\thsfreqrange = 0x%x\n", - setup_info->vco_cntrl, setup_info->prop_cntrl, + clkset->vco_cntrl, clkset->prop_cntrl, setup_info->hsfreqrange); } @@ -324,7 +545,7 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, { struct dsi_setup_info setup_info = {}; unsigned int timeout; - int ret, i; + int ret; int dsi_format; u32 phy_setup; u32 clockset2, clockset3; @@ -360,10 +581,21 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, phy_setup |= PHYSETUP_HSFREQRANGE(setup_info.hsfreqrange); rcar_mipi_dsi_write(dsi, PHYSETUP, phy_setup); - for (i = 0; i < ARRAY_SIZE(phtw); i++) { - ret = rcar_mipi_dsi_phtw_test(dsi, phtw[i]); + switch (dsi->info->model) { + case RCAR_DSI_R8A779A0: + ret = rcar_mipi_dsi_init_phtw_v3u(dsi); + if (ret < 0) + return ret; + break; + + case RCAR_DSI_R8A779G0: + ret = rcar_mipi_dsi_init_phtw_v4h(dsi, &setup_info); if (ret < 0) return ret; + break; + + default: + return -ENODEV; } /* PLL Clock Setting */ @@ -371,12 +603,13 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, rcar_mipi_dsi_set(dsi, CLOCKSET1, CLOCKSET1_SHADOW_CLEAR); rcar_mipi_dsi_clr(dsi, CLOCKSET1, CLOCKSET1_SHADOW_CLEAR); - clockset2 = CLOCKSET2_M(setup_info.m) | CLOCKSET2_N(setup_info.n) - | CLOCKSET2_VCO_CNTRL(setup_info.vco_cntrl); - clockset3 = CLOCKSET3_PROP_CNTRL(setup_info.prop_cntrl) - | CLOCKSET3_INT_CNTRL(0) - | CLOCKSET3_CPBIAS_CNTRL(0x10) - | CLOCKSET3_GMP_CNTRL(1); + clockset2 = CLOCKSET2_M(setup_info.m - dsi->info->clockset2_m_offset) + | CLOCKSET2_N(setup_info.n - dsi->info->clockset2_n_offset) + | CLOCKSET2_VCO_CNTRL(setup_info.clkset->vco_cntrl); + clockset3 = CLOCKSET3_PROP_CNTRL(setup_info.clkset->prop_cntrl) + | CLOCKSET3_INT_CNTRL(setup_info.clkset->int_cntrl) + | CLOCKSET3_CPBIAS_CNTRL(setup_info.clkset->cpbias_cntrl) + | CLOCKSET3_GMP_CNTRL(setup_info.clkset->gmp_cntrl); rcar_mipi_dsi_write(dsi, CLOCKSET2, clockset2); rcar_mipi_dsi_write(dsi, CLOCKSET3, clockset3); @@ -407,10 +640,21 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, return -ETIMEDOUT; } - for (i = 0; i < ARRAY_SIZE(phtw2); i++) { - ret = rcar_mipi_dsi_phtw_test(dsi, phtw2[i]); + switch (dsi->info->model) { + case RCAR_DSI_R8A779A0: + ret = rcar_mipi_dsi_post_init_phtw_v3u(dsi); if (ret < 0) return ret; + break; + + case RCAR_DSI_R8A779G0: + ret = rcar_mipi_dsi_post_init_phtw_v4h(dsi, &setup_info); + if (ret < 0) + return ret; + break; + + default: + return -ENODEV; } /* Enable DOT clock */ @@ -427,8 +671,21 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, dev_warn(dsi->dev, "unsupported format"); return -EINVAL; } - vclkset |= VCLKSET_COLOR_RGB | VCLKSET_DIV(setup_info.div) - | VCLKSET_LANE(dsi->lanes - 1); + + vclkset |= VCLKSET_COLOR_RGB | VCLKSET_LANE(dsi->lanes - 1); + + switch (dsi->info->model) { + case RCAR_DSI_R8A779A0: + vclkset |= VCLKSET_DIV_R8A779A0(__ffs(setup_info.vclk_divider)); + break; + + case RCAR_DSI_R8A779G0: + vclkset |= VCLKSET_DIV_R8A779G0(__ffs(setup_info.vclk_divider) - 1); + break; + + default: + return -ENODEV; + } rcar_mipi_dsi_write(dsi, VCLKSET, vclkset); @@ -841,8 +1098,25 @@ static int rcar_mipi_dsi_remove(struct platform_device *pdev) return 0; } +static const struct rcar_mipi_dsi_device_info r8a779a0_data = { + .model = RCAR_DSI_R8A779A0, + .clk_cfg = dsi_clk_cfg_r8a779a0, + .clockset2_m_offset = 2, + .clockset2_n_offset = 1, + +}; + +static const struct rcar_mipi_dsi_device_info r8a779g0_data = { + .model = RCAR_DSI_R8A779G0, + .clk_cfg = dsi_clk_cfg_r8a779g0, + .clockset2_m_offset = 0, + .clockset2_n_offset = 1, + +}; + static const struct of_device_id rcar_mipi_dsi_of_table[] = { - { .compatible = "renesas,r8a779a0-dsi-csi2-tx" }, + { .compatible = "renesas,r8a779a0-dsi-csi2-tx", .data = &r8a779a0_data }, + { .compatible = "renesas,r8a779g0-dsi-csi2-tx", .data = &r8a779g0_data }, { } }; diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h index 2eaca54636f3..608851340acf 100644 --- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h +++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h @@ -122,7 +122,8 @@ #define VCLKSET_CKEN (1 << 16) #define VCLKSET_COLOR_RGB (0 << 8) #define VCLKSET_COLOR_YCC (1 << 8) -#define VCLKSET_DIV(x) (((x) & 0x3) << 4) +#define VCLKSET_DIV_R8A779A0(x) (((x) & 0x3) << 4) +#define VCLKSET_DIV_R8A779G0(x) (((x) & 0x7) << 4) #define VCLKSET_BPP_16 (0 << 2) #define VCLKSET_BPP_18 (1 << 2) #define VCLKSET_BPP_18L (2 << 2) @@ -166,6 +167,9 @@ #define PHTW_CWEN (1 << 8) #define PHTW_TESTDIN_CODE(x) (((x) & 0xff) << 0) +#define PHTR 0x1038 +#define PHTR_TEST (1 << 16) + #define PHTC 0x103c #define PHTC_TESTCLR (1 << 0)