| Message ID | 20221122101616.770050-4-mranostay@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: j721s2: Add support for additional IPs | expand |
On 22/11/22 15:46, Matt Ranostay wrote: > From: Aswath Govindraju <a-govindraju@ti.com> > > Add support for two instance of OSPI in J721S2 SoC. > > Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> > Signed-off-by: Matt Ranostay <mranostay@ti.com> > --- > .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++ > 1 file changed, 40 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi > index 0af242aa9816..a588ab8d867b 100644 > --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi > @@ -306,4 +306,44 @@ cpts@3d000 { > ti,cpts-periodic-outputs = <2>; > }; > }; > + > + fss: syscon@47000000 { > + compatible = "simple-bus"; > + reg = <0x00 0x47000000 0x00 0x100>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + ospi0: spi@47040000 { > + compatible = "ti,am654-ospi", "cdns,qspi-nor"; > + reg = <0x00 0x47040000 0x00 0x100>, > + <0x5 0x0000000 0x1 0x0000000>; > + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; > + cdns,fifo-depth = <256>; > + cdns,fifo-width = <4>; > + cdns,trigger-address = <0x0>; > + clocks = <&k3_clks 109 5>; > + assigned-clocks = <&k3_clks 109 5>; > + assigned-clock-parents = <&k3_clks 109 7>; > + assigned-clock-rates = <166666666>; > + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + ospi1: spi@47050000 { > + compatible = "ti,am654-ospi", "cdns,qspi-nor"; > + reg = <0x00 0x47050000 0x00 0x100>, > + <0x7 0x0000000 0x1 0x0000000>; > + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; > + cdns,fifo-depth = <256>; > + cdns,fifo-width = <4>; > + cdns,trigger-address = <0x0>; > + clocks = <&k3_clks 110 5>; > + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com> > + > + }; > };
On 11/22/22 4:16 AM, Matt Ranostay wrote: > From: Aswath Govindraju <a-govindraju@ti.com> > > Add support for two instance of OSPI in J721S2 SoC. > > Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> > Signed-off-by: Matt Ranostay <mranostay@ti.com> > --- > .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++ > 1 file changed, 40 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi > index 0af242aa9816..a588ab8d867b 100644 > --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi > @@ -306,4 +306,44 @@ cpts@3d000 { > ti,cpts-periodic-outputs = <2>; > }; > }; > + > + fss: syscon@47000000 { > + compatible = "simple-bus"; > + reg = <0x00 0x47000000 0x00 0x100>; You do not need "reg" property here, "ranges" below takes care of the translations. Andrew > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + ospi0: spi@47040000 { > + compatible = "ti,am654-ospi", "cdns,qspi-nor"; > + reg = <0x00 0x47040000 0x00 0x100>, > + <0x5 0x0000000 0x1 0x0000000>; > + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; > + cdns,fifo-depth = <256>; > + cdns,fifo-width = <4>; > + cdns,trigger-address = <0x0>; > + clocks = <&k3_clks 109 5>; > + assigned-clocks = <&k3_clks 109 5>; > + assigned-clock-parents = <&k3_clks 109 7>; > + assigned-clock-rates = <166666666>; > + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + ospi1: spi@47050000 { > + compatible = "ti,am654-ospi", "cdns,qspi-nor"; > + reg = <0x00 0x47050000 0x00 0x100>, > + <0x7 0x0000000 0x1 0x0000000>; > + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; > + cdns,fifo-depth = <256>; > + cdns,fifo-width = <4>; > + cdns,trigger-address = <0x0>; > + clocks = <&k3_clks 110 5>; > + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + }; > };
On 22/11/22 15:46, Matt Ranostay wrote: > From: Aswath Govindraju <a-govindraju@ti.com> > > Add support for two instance of OSPI in J721S2 SoC. > > Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> > Signed-off-by: Matt Ranostay <mranostay@ti.com> > --- > .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++ > 1 file changed, 40 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi > index 0af242aa9816..a588ab8d867b 100644 > --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi > @@ -306,4 +306,44 @@ cpts@3d000 { > ti,cpts-periodic-outputs = <2>; > }; > }; > + > + fss: syscon@47000000 { Node needs to be renamed as bus@<> as the compatible is "simple-bus" +/workdir/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: syscon@47000000: $nodename:0: 'syscon@47000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' > + compatible = "simple-bus"; > + reg = <0x00 0x47000000 0x00 0x100>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + ospi0: spi@47040000 { > + compatible = "ti,am654-ospi", "cdns,qspi-nor"; > + reg = <0x00 0x47040000 0x00 0x100>, > + <0x5 0x0000000 0x1 0x0000000>; > + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; > + cdns,fifo-depth = <256>; > + cdns,fifo-width = <4>; > + cdns,trigger-address = <0x0>; > + clocks = <&k3_clks 109 5>; > + assigned-clocks = <&k3_clks 109 5>; > + assigned-clock-parents = <&k3_clks 109 7>; > + assigned-clock-rates = <166666666>; > + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + ospi1: spi@47050000 { > + compatible = "ti,am654-ospi", "cdns,qspi-nor"; > + reg = <0x00 0x47050000 0x00 0x100>, > + <0x7 0x0000000 0x1 0x0000000>; > + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; > + cdns,fifo-depth = <256>; > + cdns,fifo-width = <4>; > + cdns,trigger-address = <0x0>; > + clocks = <&k3_clks 110 5>; > + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + }; > };
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index 0af242aa9816..a588ab8d867b 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -306,4 +306,44 @@ cpts@3d000 { ti,cpts-periodic-outputs = <2>; }; }; + + fss: syscon@47000000 { + compatible = "simple-bus"; + reg = <0x00 0x47000000 0x00 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ospi0: spi@47040000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x47040000 0x00 0x100>, + <0x5 0x0000000 0x1 0x0000000>; + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 109 5>; + assigned-clocks = <&k3_clks 109 5>; + assigned-clock-parents = <&k3_clks 109 7>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ospi1: spi@47050000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x47050000 0x00 0x100>, + <0x7 0x0000000 0x1 0x0000000>; + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 110 5>; + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + + }; };