| Message ID | 1668763704-10408-1-git-send-email-yangtiezhu@loongson.cn (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | tools: selftests: Use "grep -E" instead of "egrep" | expand |
On 11/18/22 02:28, Tiezhu Yang wrote: > The latest version of grep claims the egrep is now obsolete so the build > now contains warnings that look like: > egrep: warning: egrep is obsolescent; using grep -E > fix this up by moving the related file to use "grep -E" instead. > > sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests` > > Here are the steps to install the latest grep: > > wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz > tar xf grep-3.8.tar.gz > cd grep-3.8 && ./configure && make > sudo make install > export PATH=/usr/local/bin:$PATH > Does this change work without the latest grep? It seems to work on grep (GNU grep) 3.7 when I ran quick test on kselftest_deps.sh with your change. > Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> > --- > .../selftests/ftrace/test.d/preemptirq/irqsoff_tracer.tc | 8 ++++---- > tools/testing/selftests/gpio/gpio-sim.sh | 2 +- > tools/testing/selftests/kselftest_deps.sh | 2 +- > tools/testing/selftests/net/toeplitz.sh | 2 +- > tools/testing/selftests/powerpc/scripts/hmi.sh | 2 +- > tools/testing/selftests/rcutorture/bin/console-badness.sh | 2 +- > tools/testing/selftests/rcutorture/bin/kvm-build.sh | 4 ++-- > tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh | 4 ++-- > tools/testing/selftests/rcutorture/bin/kvm.sh | 4 ++-- > tools/testing/selftests/rcutorture/bin/parse-console.sh | 10 +++++----- > 10 files changed, 20 insertions(+), 20 deletions(-) > Please split these into sepratate 5 patches. All rcu changes in one, net in one, powerpc etc. The change looks good to me. thanks, -- Shuah
On 11/22/2022 11:43 PM, Shuah Khan wrote: > On 11/18/22 02:28, Tiezhu Yang wrote: >> The latest version of grep claims the egrep is now obsolete so the build >> now contains warnings that look like: >> egrep: warning: egrep is obsolescent; using grep -E >> fix this up by moving the related file to use "grep -E" instead. >> >> sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests` >> >> Here are the steps to install the latest grep: >> >> wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz >> tar xf grep-3.8.tar.gz >> cd grep-3.8 && ./configure && make >> sudo make install >> export PATH=/usr/local/bin:$PATH >> > > Does this change work without the latest grep? It seems to work on > grep (GNU grep) 3.7 when I ran quick test on kselftest_deps.sh with > your change. Yes, AFAIK, "grep -E" is supported by various versions of grep. We can see the following NEWS in grep-3.8 release announcement [1]: "The egrep and fgrep commands, which have been deprecated since release 2.5.3 (2007), now warn that they are obsolescent and should be replaced by grep -E and grep -F." [1] https://savannah.gnu.org/forum/forum.php?forum_id=10227 > >> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> >> --- >> .../selftests/ftrace/test.d/preemptirq/irqsoff_tracer.tc | 8 >> ++++---- >> tools/testing/selftests/gpio/gpio-sim.sh | 2 +- >> tools/testing/selftests/kselftest_deps.sh | 2 +- >> tools/testing/selftests/net/toeplitz.sh | 2 +- >> tools/testing/selftests/powerpc/scripts/hmi.sh | 2 +- >> tools/testing/selftests/rcutorture/bin/console-badness.sh | 2 +- >> tools/testing/selftests/rcutorture/bin/kvm-build.sh | 4 >> ++-- >> tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh | 4 >> ++-- >> tools/testing/selftests/rcutorture/bin/kvm.sh | 4 >> ++-- >> tools/testing/selftests/rcutorture/bin/parse-console.sh | 10 >> +++++----- >> 10 files changed, 20 insertions(+), 20 deletions(-) >> > > Please split these into sepratate 5 patches. All rcu changes in one, net in > one, powerpc etc. OK, maybe 6 patches, (1) rcutorture (2) ftrace (3) powerpc (4) gpio (5) net (6) kselftest_deps.sh > > The change looks good to me. Thank you, I will send v2 later. Thanks, Tiezhu
diff --git a/tools/testing/selftests/ftrace/test.d/preemptirq/irqsoff_tracer.tc b/tools/testing/selftests/ftrace/test.d/preemptirq/irqsoff_tracer.tc index 22bff12..ba10389 100644 --- a/tools/testing/selftests/ftrace/test.d/preemptirq/irqsoff_tracer.tc +++ b/tools/testing/selftests/ftrace/test.d/preemptirq/irqsoff_tracer.tc @@ -46,10 +46,10 @@ cat trace grep -q "tracer: preemptoff" trace || fail # Check the end of the section -egrep -q "5.....us : <stack trace>" trace || fail +grep -E -q "5.....us : <stack trace>" trace || fail # Check for 500ms of latency -egrep -q "latency: 5..... us" trace || fail +grep -E -q "latency: 5..... us" trace || fail reset_tracer @@ -69,10 +69,10 @@ cat trace grep -q "tracer: irqsoff" trace || fail # Check the end of the section -egrep -q "5.....us : <stack trace>" trace || fail +grep -E -q "5.....us : <stack trace>" trace || fail # Check for 500ms of latency -egrep -q "latency: 5..... us" trace || fail +grep -E -q "latency: 5..... us" trace || fail reset_tracer exit 0 diff --git a/tools/testing/selftests/gpio/gpio-sim.sh b/tools/testing/selftests/gpio/gpio-sim.sh index 341e3de..9f539d4 100755 --- a/tools/testing/selftests/gpio/gpio-sim.sh +++ b/tools/testing/selftests/gpio/gpio-sim.sh @@ -27,7 +27,7 @@ remove_chip() { continue fi - LINES=`ls $CONFIGFS_DIR/$CHIP/$BANK/ | egrep ^line` + LINES=`ls $CONFIGFS_DIR/$CHIP/$BANK/ | grep -E ^line` if [ "$?" = 0 ]; then for LINE in $LINES; do if [ -e $CONFIGFS_DIR/$CHIP/$BANK/$LINE/hog ]; then diff --git a/tools/testing/selftests/kselftest_deps.sh b/tools/testing/selftests/kselftest_deps.sh index 708cb54..7424a1f 100755 --- a/tools/testing/selftests/kselftest_deps.sh +++ b/tools/testing/selftests/kselftest_deps.sh @@ -90,7 +90,7 @@ pass_libs=() pass_cnt=0 # Get all TARGETS from selftests Makefile -targets=$(egrep "^TARGETS +|^TARGETS =" Makefile | cut -d "=" -f2) +targets=$(grep -E "^TARGETS +|^TARGETS =" Makefile | cut -d "=" -f2) # Single test case if [ $# -eq 2 ] diff --git a/tools/testing/selftests/net/toeplitz.sh b/tools/testing/selftests/net/toeplitz.sh index 0a49907..da5bfd8 100755 --- a/tools/testing/selftests/net/toeplitz.sh +++ b/tools/testing/selftests/net/toeplitz.sh @@ -32,7 +32,7 @@ DEV="eth0" # This is determined by reading the RSS indirection table using ethtool. get_rss_cfg_num_rxqs() { echo $(ethtool -x "${DEV}" | - egrep [[:space:]]+[0-9]+:[[:space:]]+ | + grep -E [[:space:]]+[0-9]+:[[:space:]]+ | cut -d: -f2- | awk '{$1=$1};1' | tr ' ' '\n' | diff --git a/tools/testing/selftests/powerpc/scripts/hmi.sh b/tools/testing/selftests/powerpc/scripts/hmi.sh index dcdb392..bcc7b6b 100755 --- a/tools/testing/selftests/powerpc/scripts/hmi.sh +++ b/tools/testing/selftests/powerpc/scripts/hmi.sh @@ -36,7 +36,7 @@ trap "ppc64_cpu --smt-snooze-delay=100" 0 1 # for each chip+core combination # todo - less fragile parsing -egrep -o 'OCC: Chip [0-9a-f]+ Core [0-9a-f]' < /sys/firmware/opal/msglog | +grep -E -o 'OCC: Chip [0-9a-f]+ Core [0-9a-f]' < /sys/firmware/opal/msglog | while read chipcore; do chip=$(echo "$chipcore"|awk '{print $3}') core=$(echo "$chipcore"|awk '{print $5}') diff --git a/tools/testing/selftests/rcutorture/bin/console-badness.sh b/tools/testing/selftests/rcutorture/bin/console-badness.sh index 69f8a59..aad51e7 100755 --- a/tools/testing/selftests/rcutorture/bin/console-badness.sh +++ b/tools/testing/selftests/rcutorture/bin/console-badness.sh @@ -10,7 +10,7 @@ # # Authors: Paul E. McKenney <paulmck@kernel.org> -egrep 'Badness|WARNING:|Warn|BUG|===========|BUG: KCSAN:|Call Trace:|Oops:|detected stalls on CPUs/tasks:|self-detected stall on CPU|Stall ended before state dump start|\?\?\? Writer stall state|rcu_.*kthread starved for|!!!' | +grep -E 'Badness|WARNING:|Warn|BUG|===========|BUG: KCSAN:|Call Trace:|Oops:|detected stalls on CPUs/tasks:|self-detected stall on CPU|Stall ended before state dump start|\?\?\? Writer stall state|rcu_.*kthread starved for|!!!' | grep -v 'ODEBUG: ' | grep -v 'This means that this is a DEBUG kernel and it is' | grep -v 'Warning: unable to open an initial console' | diff --git a/tools/testing/selftests/rcutorture/bin/kvm-build.sh b/tools/testing/selftests/rcutorture/bin/kvm-build.sh index 5ad973d..9052c4c 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-build.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-build.sh @@ -45,10 +45,10 @@ fi ncpus="`getconf _NPROCESSORS_ONLN`" make -j$((2 * ncpus)) $TORTURE_KMAKE_ARG > $resdir/Make.out 2>&1 retval=$? -if test $retval -ne 0 || grep "rcu[^/]*": < $resdir/Make.out | egrep -q "Stop|Error|error:|warning:" || egrep -q "Stop|Error|error:" < $resdir/Make.out +if test $retval -ne 0 || grep "rcu[^/]*": < $resdir/Make.out | grep -E -q "Stop|Error|error:|warning:" || grep -E -q "Stop|Error|error:" < $resdir/Make.out then echo Kernel build error - egrep "Stop|Error|error:|warning:" < $resdir/Make.out + grep -E "Stop|Error|error:|warning:" < $resdir/Make.out echo Run aborted. exit 3 fi diff --git a/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh b/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh index 88983cb..0840c44 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh @@ -32,9 +32,9 @@ for i in ${rundir}/*/Make.out do scenariodir="`dirname $i`" scenariobasedir="`echo ${scenariodir} | sed -e 's/\.[0-9]*$//'`" - if egrep -q "error:|warning:|^ld: .*undefined reference to" < $i + if grep -E -q "error:|warning:|^ld: .*undefined reference to" < $i then - egrep "error:|warning:|^ld: .*undefined reference to" < $i > $i.diags + grep -E "error:|warning:|^ld: .*undefined reference to" < $i > $i.diags files="$files $i.diags $i" elif ! test -f ${scenariobasedir}/vmlinux && ! test -f "${rundir}/re-run" then diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh index 6c73481..58ccd34 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm.sh @@ -586,7 +586,7 @@ awk < $T/cfgcpu.pack \ echo kvm-end-run-stats.sh "$resdir/$ds" "$starttime" >> $T/script # Extract the tests and their batches from the script. -egrep 'Start batch|Starting build\.' $T/script | grep -v ">>" | +grep -E 'Start batch|Starting build\.' $T/script | grep -v ">>" | sed -e 's/:.*$//' -e 's/^echo //' -e 's/-ovf//' | awk ' /^----Start/ { @@ -623,7 +623,7 @@ then elif test "$dryrun" = sched then # Extract the test run schedule from the script. - egrep 'Start batch|Starting build\.' $T/script | grep -v ">>" | + grep -E 'Start batch|Starting build\.' $T/script | grep -v ">>" | sed -e 's/:.*$//' -e 's/^echo //' nbuilds="`grep 'Starting build\.' $T/script | grep -v ">>" | sed -e 's/:.*$//' -e 's/^echo //' | diff --git a/tools/testing/selftests/rcutorture/bin/parse-console.sh b/tools/testing/selftests/rcutorture/bin/parse-console.sh index 822eb03..9ab0f6b 100755 --- a/tools/testing/selftests/rcutorture/bin/parse-console.sh +++ b/tools/testing/selftests/rcutorture/bin/parse-console.sh @@ -65,7 +65,7 @@ then fi grep --binary-files=text 'torture:.*ver:' $file | - egrep --binary-files=text -v '\(null\)|rtc: 000000000* ' | + grep -E --binary-files=text -v '\(null\)|rtc: 000000000* ' | sed -e 's/^(initramfs)[^]]*] //' -e 's/^\[[^]]*] //' | sed -e 's/^.*ver: //' | awk ' @@ -128,17 +128,17 @@ then then summary="$summary Badness: $n_badness" fi - n_warn=`grep -v 'Warning: unable to open an initial console' $file | grep -v 'Warning: Failed to add ttynull console. No stdin, stdout, and stderr for the init process' | egrep -c 'WARNING:|Warn'` + n_warn=`grep -v 'Warning: unable to open an initial console' $file | grep -v 'Warning: Failed to add ttynull console. No stdin, stdout, and stderr for the init process' | grep -E -c 'WARNING:|Warn'` if test "$n_warn" -ne 0 then summary="$summary Warnings: $n_warn" fi - n_bugs=`egrep -c '\bBUG|Oops:' $file` + n_bugs=`grep -E -c '\bBUG|Oops:' $file` if test "$n_bugs" -ne 0 then summary="$summary Bugs: $n_bugs" fi - n_kcsan=`egrep -c 'BUG: KCSAN: ' $file` + n_kcsan=`grep -E -c 'BUG: KCSAN: ' $file` if test "$n_kcsan" -ne 0 then if test "$n_bugs" = "$n_kcsan" @@ -158,7 +158,7 @@ then then summary="$summary lockdep: $n_badness" fi - n_stalls=`egrep -c 'detected stalls on CPUs/tasks:|self-detected stall on CPU|Stall ended before state dump start|\?\?\? Writer stall state' $file` + n_stalls=`grep -E -c 'detected stalls on CPUs/tasks:|self-detected stall on CPU|Stall ended before state dump start|\?\?\? Writer stall state' $file` if test "$n_stalls" -ne 0 then summary="$summary Stalls: $n_stalls"
The latest version of grep claims the egrep is now obsolete so the build now contains warnings that look like: egrep: warning: egrep is obsolescent; using grep -E fix this up by moving the related file to use "grep -E" instead. sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests` Here are the steps to install the latest grep: wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz tar xf grep-3.8.tar.gz cd grep-3.8 && ./configure && make sudo make install export PATH=/usr/local/bin:$PATH Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> --- .../selftests/ftrace/test.d/preemptirq/irqsoff_tracer.tc | 8 ++++---- tools/testing/selftests/gpio/gpio-sim.sh | 2 +- tools/testing/selftests/kselftest_deps.sh | 2 +- tools/testing/selftests/net/toeplitz.sh | 2 +- tools/testing/selftests/powerpc/scripts/hmi.sh | 2 +- tools/testing/selftests/rcutorture/bin/console-badness.sh | 2 +- tools/testing/selftests/rcutorture/bin/kvm-build.sh | 4 ++-- tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh | 4 ++-- tools/testing/selftests/rcutorture/bin/kvm.sh | 4 ++-- tools/testing/selftests/rcutorture/bin/parse-console.sh | 10 +++++----- 10 files changed, 20 insertions(+), 20 deletions(-)