| Message ID | 20221114095226.20917-1-hreitz@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] tests/stream-under-throttle: New test | expand |
Am 14.11.22 um 10:52 schrieb Hanna Reitz: > Test streaming a base image into the top image underneath two throttle > nodes. This was reported to make qemu 7.1 hang > (https://gitlab.com/qemu-project/qemu/-/issues/1215), so this serves as > a regression test. > > Signed-off-by: Hanna Reitz <hreitz@redhat.com> > --- > Based-on: <20221107151321.211175-1-hreitz@redhat.com> > > v1: https://lists.nongnu.org/archive/html/qemu-block/2022-11/msg00368.html > > v2: > - Replace `asyncio.exceptions.TimeoutError` by `asyncio.TimeoutError`: > Stefan reported that the CI does not recognize the former: > https://lists.nongnu.org/archive/html/qemu-block/2022-11/msg00424.html > > As far as I understand, the latter was basically moved to become the > former in Python 3.11, and an alias remains, so both are basically > equivalent. I only have 3.10, though, where the documentation says > that both are different, even though using either seems to work fine > (i.e. both catch the timeout there). Not sure about previous > versions, but the CI seems pretty certain about not knowing > `asyncio.exceptions.TimeoutError`, so use `asyncio.TimeoutError` > instead. (Even though that is deprecated in 3.11, but this is not the > first place in the tree to use it, so it should not be too bad.) > --- > .../qemu-iotests/tests/stream-under-throttle | 121 ++++++++++++++++++ > .../tests/stream-under-throttle.out | 5 + > 2 files changed, 126 insertions(+) > create mode 100755 tests/qemu-iotests/tests/stream-under-throttle > create mode 100644 tests/qemu-iotests/tests/stream-under-throttle.out As a heads up, I do get the following on s390. I have not yet looked into that: +EE +====================================================================== +ERROR: test_stream (__main__.TestStreamWithThrottle) +Do a simple stream beneath the two throttle nodes. Should complete +---------------------------------------------------------------------- +Traceback (most recent call last): + File "qemu/tests/qemu-iotests/tests/stream-under-throttle", line 110, in test_stream + self.vm.run_job('stream') + File "qemu/tests/qemu-iotests/iotests.py", line 986, in run_job + result = self.qmp('query-jobs') + File "qemu/python/qemu/machine/machine.py", line 646, in qmp + ret = self._qmp.cmd(cmd, args=qmp_args) + File "qemu/python/qemu/qmp/legacy.py", line 204, in cmd + return self.cmd_obj(qmp_cmd) + File "qemu/python/qemu/qmp/legacy.py", line 184, in cmd_obj + self._qmp._raw(qmp_cmd, assign_id=False), + File "qemu/python/qemu/qmp/protocol.py", line 154, in _wrapper + raise StateError(emsg, proto.runstate, required_state) +qemu.qmp.protocol.StateError: QMPClient is disconnecting. Call disconnect() to return to IDLE state. + +====================================================================== +ERROR: test_stream (__main__.TestStreamWithThrottle) +Do a simple stream beneath the two throttle nodes. Should complete +---------------------------------------------------------------------- +Traceback (most recent call last): + File "qemu/python/qemu/machine/machine.py", line 533, in _soft_shutdown + self.qmp('quit') + File "qemu/python/qemu/machine/machine.py", line 646, in qmp + ret = self._qmp.cmd(cmd, args=qmp_args) + File "qemu/python/qemu/qmp/legacy.py", line 204, in cmd + return self.cmd_obj(qmp_cmd) + File "qemu/python/qemu/qmp/legacy.py", line 184, in cmd_obj + self._qmp._raw(qmp_cmd, assign_id=False), + File "qemu/python/qemu/qmp/protocol.py", line 154, in _wrapper + raise StateError(emsg, proto.runstate, required_state) +qemu.qmp.protocol.StateError: QMPClient is disconnecting. Call disconnect() to return to IDLE state. + +During handling of the above exception, another exception occurred: + +Traceback (most recent call last): + File "qemu/python/qemu/machine/machine.py", line 554, in _do_shutdown + self._soft_shutdown(timeout) + File "qemu/python/qemu/machine/machine.py", line 536, in _soft_shutdown + self._close_qmp_connection() + File "qemu/python/qemu/machine/machine.py", line 476, in _close_qmp_connection + self._qmp.close() + File "qemu/python/qemu/qmp/legacy.py", line 277, in close + self._sync( + File "qemu/python/qemu/qmp/legacy.py", line 94, in _sync + return self._aloop.run_until_complete( + File "/usr/lib64/python3.10/asyncio/base_events.py", line 649, in run_until_complete + return future.result() + File "/usr/lib64/python3.10/asyncio/tasks.py", line 408, in wait_for + return await fut + File "qemu/python/qemu/qmp/protocol.py", line 398, in disconnect + await self._wait_disconnect() + File "qemu/python/qemu/qmp/protocol.py", line 710, in _wait_disconnect + await all_defined_tasks # Raise Exceptions from the bottom half. + File "qemu/python/qemu/qmp/protocol.py", line 861, in _bh_loop_forever + await async_fn() + File "qemu/python/qemu/qmp/protocol.py", line 899, in _bh_recv_message + msg = await self._recv() + File "qemu/python/qemu/qmp/protocol.py", line 1000, in _recv + message = await self._do_recv() + File "qemu/python/qemu/qmp/qmp_client.py", line 402, in _do_recv + msg_bytes = await self._readline() + File "qemu/python/qemu/qmp/protocol.py", line 968, in _readline + raise EOFError +EOFError + +The above exception was the direct cause of the following exception: + +Traceback (most recent call last): + File "qemu/tests/qemu-iotests/tests/stream-under-throttle", line 94, in tearDown + self.vm.shutdown() + File "qemu/python/qemu/machine/machine.py", line 583, in shutdown + self._do_shutdown(timeout) + File "qemu/python/qemu/machine/machine.py", line 557, in _do_shutdown + raise AbnormalShutdown("Could not perform graceful shutdown") \ +qemu.machine.machine.AbnormalShutdown: Could not perform graceful shutdown + ---------------------------------------------------------------------- Ran 1 tests
Am 07.12.22 um 11:31 schrieb Christian Borntraeger: > Am 14.11.22 um 10:52 schrieb Hanna Reitz: >> Test streaming a base image into the top image underneath two throttle >> nodes. This was reported to make qemu 7.1 hang >> (https://gitlab.com/qemu-project/qemu/-/issues/1215), so this serves as >> a regression test. >> >> Signed-off-by: Hanna Reitz <hreitz@redhat.com> >> --- >> Based-on: <20221107151321.211175-1-hreitz@redhat.com> >> >> v1: https://lists.nongnu.org/archive/html/qemu-block/2022-11/msg00368.html >> >> v2: >> - Replace `asyncio.exceptions.TimeoutError` by `asyncio.TimeoutError`: >> Stefan reported that the CI does not recognize the former: >> https://lists.nongnu.org/archive/html/qemu-block/2022-11/msg00424.html >> >> As far as I understand, the latter was basically moved to become the >> former in Python 3.11, and an alias remains, so both are basically >> equivalent. I only have 3.10, though, where the documentation says >> that both are different, even though using either seems to work fine >> (i.e. both catch the timeout there). Not sure about previous >> versions, but the CI seems pretty certain about not knowing >> `asyncio.exceptions.TimeoutError`, so use `asyncio.TimeoutError` >> instead. (Even though that is deprecated in 3.11, but this is not the >> first place in the tree to use it, so it should not be too bad.) >> --- >> .../qemu-iotests/tests/stream-under-throttle | 121 ++++++++++++++++++ >> .../tests/stream-under-throttle.out | 5 + >> 2 files changed, 126 insertions(+) >> create mode 100755 tests/qemu-iotests/tests/stream-under-throttle >> create mode 100644 tests/qemu-iotests/tests/stream-under-throttle.out > > As a heads up, I do get the following on s390. I have not yet looked into that: > > +EE > +====================================================================== > +ERROR: test_stream (__main__.TestStreamWithThrottle) > +Do a simple stream beneath the two throttle nodes. Should complete > +---------------------------------------------------------------------- > +Traceback (most recent call last): > + File "qemu/tests/qemu-iotests/tests/stream-under-throttle", line 110, in test_stream > + self.vm.run_job('stream') > + File "qemu/tests/qemu-iotests/iotests.py", line 986, in run_job > + result = self.qmp('query-jobs') > + File "qemu/python/qemu/machine/machine.py", line 646, in qmp > + ret = self._qmp.cmd(cmd, args=qmp_args) > + File "qemu/python/qemu/qmp/legacy.py", line 204, in cmd > + return self.cmd_obj(qmp_cmd) > + File "qemu/python/qemu/qmp/legacy.py", line 184, in cmd_obj > + self._qmp._raw(qmp_cmd, assign_id=False), > + File "qemu/python/qemu/qmp/protocol.py", line 154, in _wrapper > + raise StateError(emsg, proto.runstate, required_state) > +qemu.qmp.protocol.StateError: QMPClient is disconnecting. Call disconnect() to return to IDLE state. > + > +====================================================================== > +ERROR: test_stream (__main__.TestStreamWithThrottle) > +Do a simple stream beneath the two throttle nodes. Should complete > +---------------------------------------------------------------------- > +Traceback (most recent call last): > + File "qemu/python/qemu/machine/machine.py", line 533, in _soft_shutdown > + self.qmp('quit') > + File "qemu/python/qemu/machine/machine.py", line 646, in qmp > + ret = self._qmp.cmd(cmd, args=qmp_args) > + File "qemu/python/qemu/qmp/legacy.py", line 204, in cmd > + return self.cmd_obj(qmp_cmd) > + File "qemu/python/qemu/qmp/legacy.py", line 184, in cmd_obj > + self._qmp._raw(qmp_cmd, assign_id=False), > + File "qemu/python/qemu/qmp/protocol.py", line 154, in _wrapper > + raise StateError(emsg, proto.runstate, required_state) > +qemu.qmp.protocol.StateError: QMPClient is disconnecting. Call disconnect() to return to IDLE state. > + > +During handling of the above exception, another exception occurred: > + > +Traceback (most recent call last): > + File "qemu/python/qemu/machine/machine.py", line 554, in _do_shutdown > + self._soft_shutdown(timeout) > + File "qemu/python/qemu/machine/machine.py", line 536, in _soft_shutdown > + self._close_qmp_connection() > + File "qemu/python/qemu/machine/machine.py", line 476, in _close_qmp_connection > + self._qmp.close() > + File "qemu/python/qemu/qmp/legacy.py", line 277, in close > + self._sync( > + File "qemu/python/qemu/qmp/legacy.py", line 94, in _sync > + return self._aloop.run_until_complete( > + File "/usr/lib64/python3.10/asyncio/base_events.py", line 649, in run_until_complete > + return future.result() > + File "/usr/lib64/python3.10/asyncio/tasks.py", line 408, in wait_for > + return await fut > + File "qemu/python/qemu/qmp/protocol.py", line 398, in disconnect > + await self._wait_disconnect() > + File "qemu/python/qemu/qmp/protocol.py", line 710, in _wait_disconnect > + await all_defined_tasks # Raise Exceptions from the bottom half. > + File "qemu/python/qemu/qmp/protocol.py", line 861, in _bh_loop_forever > + await async_fn() > + File "qemu/python/qemu/qmp/protocol.py", line 899, in _bh_recv_message > + msg = await self._recv() > + File "qemu/python/qemu/qmp/protocol.py", line 1000, in _recv > + message = await self._do_recv() > + File "qemu/python/qemu/qmp/qmp_client.py", line 402, in _do_recv > + msg_bytes = await self._readline() > + File "qemu/python/qemu/qmp/protocol.py", line 968, in _readline > + raise EOFError > +EOFError > + > +The above exception was the direct cause of the following exception: > + > +Traceback (most recent call last): > + File "qemu/tests/qemu-iotests/tests/stream-under-throttle", line 94, in tearDown > + self.vm.shutdown() > + File "qemu/python/qemu/machine/machine.py", line 583, in shutdown > + self._do_shutdown(timeout) > + File "qemu/python/qemu/machine/machine.py", line 557, in _do_shutdown > + raise AbnormalShutdown("Could not perform graceful shutdown") \ > +qemu.machine.machine.AbnormalShutdown: Could not perform graceful shutdown > + > ---------------------------------------------------------------------- > Ran 1 tests So with debugging I do get +DEBUG:qemu.qmp.qmp_client.qemu-8015:<-- { + "timestamp": { + "seconds": 1670417504, + "microseconds": 947655 + }, + "event": "GUEST_PANICKED", + "data": { + "action": "poweroff", + "info": { + "core": 0, + "psw-addr": 0, + "reason": "disabled-wait", + "psw-mask": 562956395872256, + "type": "s390" + } + } +} and I think the reason is, that we neither have a kernel or a bootable disk. As we do not have a BIOS then sitting around we stop the machine: The command line was qemu-system-s390x -accel tcg -display none -vga none -chardev socket,id=mon,path=/tmp/tmp5kjtkwjn/qemu-8015-monitor.sock -mon chardev=mon,mode=control -qtest unix:path=/tmp/tmp5kjtkwjn/qemu-8015-qtest.sock -accel qtest -nodefaults -display none -accel qtest -object iothread,id=iothr0 -object throttle-group,id=thrgr-unlimited -object throttle-group,id=thrgr-limited,x-iops-total=10000,x-bps-total=104857600 -blockdev driver=throttle,node-name=throttled-node,throttle-group=thrgr-limited,file.driver=throttle,file.throttle-group=thrgr-unlimited,file.file.driver=qcow2,file.file.node-name=unthrottled-node,file.file.file.driver=file,file.file.file.filename=/home/cborntra/REPOS/qemu/build/tests/qemu-iotests/scratch/top.img -device virtio-blk,iothread=iothr0,drive=throttled-node' not sure what the right fix is. Maybe a minimal kernel that loads a wait PSW? CC-ing qemu-s390x
Am 07.12.22 um 13:56 schrieb Christian Borntraeger: > > Am 07.12.22 um 11:31 schrieb Christian Borntraeger: >> Am 14.11.22 um 10:52 schrieb Hanna Reitz: >>> Test streaming a base image into the top image underneath two throttle >>> nodes. This was reported to make qemu 7.1 hang >>> (https://gitlab.com/qemu-project/qemu/-/issues/1215), so this serves as >>> a regression test. >>> >>> Signed-off-by: Hanna Reitz <hreitz@redhat.com> >>> --- >>> Based-on: <20221107151321.211175-1-hreitz@redhat.com> >>> >>> v1: https://lists.nongnu.org/archive/html/qemu-block/2022-11/msg00368.html >>> >>> v2: >>> - Replace `asyncio.exceptions.TimeoutError` by `asyncio.TimeoutError`: >>> Stefan reported that the CI does not recognize the former: >>> https://lists.nongnu.org/archive/html/qemu-block/2022-11/msg00424.html >>> >>> As far as I understand, the latter was basically moved to become the >>> former in Python 3.11, and an alias remains, so both are basically >>> equivalent. I only have 3.10, though, where the documentation says >>> that both are different, even though using either seems to work fine >>> (i.e. both catch the timeout there). Not sure about previous >>> versions, but the CI seems pretty certain about not knowing >>> `asyncio.exceptions.TimeoutError`, so use `asyncio.TimeoutError` >>> instead. (Even though that is deprecated in 3.11, but this is not the >>> first place in the tree to use it, so it should not be too bad.) >>> --- >>> .../qemu-iotests/tests/stream-under-throttle | 121 ++++++++++++++++++ >>> .../tests/stream-under-throttle.out | 5 + >>> 2 files changed, 126 insertions(+) >>> create mode 100755 tests/qemu-iotests/tests/stream-under-throttle >>> create mode 100644 tests/qemu-iotests/tests/stream-under-throttle.out >> >> As a heads up, I do get the following on s390. I have not yet looked into that: >> >> +EE >> +====================================================================== >> +ERROR: test_stream (__main__.TestStreamWithThrottle) >> +Do a simple stream beneath the two throttle nodes. Should complete >> +---------------------------------------------------------------------- >> +Traceback (most recent call last): >> + File "qemu/tests/qemu-iotests/tests/stream-under-throttle", line 110, in test_stream >> + self.vm.run_job('stream') >> + File "qemu/tests/qemu-iotests/iotests.py", line 986, in run_job >> + result = self.qmp('query-jobs') >> + File "qemu/python/qemu/machine/machine.py", line 646, in qmp >> + ret = self._qmp.cmd(cmd, args=qmp_args) >> + File "qemu/python/qemu/qmp/legacy.py", line 204, in cmd >> + return self.cmd_obj(qmp_cmd) >> + File "qemu/python/qemu/qmp/legacy.py", line 184, in cmd_obj >> + self._qmp._raw(qmp_cmd, assign_id=False), >> + File "qemu/python/qemu/qmp/protocol.py", line 154, in _wrapper >> + raise StateError(emsg, proto.runstate, required_state) >> +qemu.qmp.protocol.StateError: QMPClient is disconnecting. Call disconnect() to return to IDLE state. >> + >> +====================================================================== >> +ERROR: test_stream (__main__.TestStreamWithThrottle) >> +Do a simple stream beneath the two throttle nodes. Should complete >> +---------------------------------------------------------------------- >> +Traceback (most recent call last): >> + File "qemu/python/qemu/machine/machine.py", line 533, in _soft_shutdown >> + self.qmp('quit') >> + File "qemu/python/qemu/machine/machine.py", line 646, in qmp >> + ret = self._qmp.cmd(cmd, args=qmp_args) >> + File "qemu/python/qemu/qmp/legacy.py", line 204, in cmd >> + return self.cmd_obj(qmp_cmd) >> + File "qemu/python/qemu/qmp/legacy.py", line 184, in cmd_obj >> + self._qmp._raw(qmp_cmd, assign_id=False), >> + File "qemu/python/qemu/qmp/protocol.py", line 154, in _wrapper >> + raise StateError(emsg, proto.runstate, required_state) >> +qemu.qmp.protocol.StateError: QMPClient is disconnecting. Call disconnect() to return to IDLE state. >> + >> +During handling of the above exception, another exception occurred: >> + >> +Traceback (most recent call last): >> + File "qemu/python/qemu/machine/machine.py", line 554, in _do_shutdown >> + self._soft_shutdown(timeout) >> + File "qemu/python/qemu/machine/machine.py", line 536, in _soft_shutdown >> + self._close_qmp_connection() >> + File "qemu/python/qemu/machine/machine.py", line 476, in _close_qmp_connection >> + self._qmp.close() >> + File "qemu/python/qemu/qmp/legacy.py", line 277, in close >> + self._sync( >> + File "qemu/python/qemu/qmp/legacy.py", line 94, in _sync >> + return self._aloop.run_until_complete( >> + File "/usr/lib64/python3.10/asyncio/base_events.py", line 649, in run_until_complete >> + return future.result() >> + File "/usr/lib64/python3.10/asyncio/tasks.py", line 408, in wait_for >> + return await fut >> + File "qemu/python/qemu/qmp/protocol.py", line 398, in disconnect >> + await self._wait_disconnect() >> + File "qemu/python/qemu/qmp/protocol.py", line 710, in _wait_disconnect >> + await all_defined_tasks # Raise Exceptions from the bottom half. >> + File "qemu/python/qemu/qmp/protocol.py", line 861, in _bh_loop_forever >> + await async_fn() >> + File "qemu/python/qemu/qmp/protocol.py", line 899, in _bh_recv_message >> + msg = await self._recv() >> + File "qemu/python/qemu/qmp/protocol.py", line 1000, in _recv >> + message = await self._do_recv() >> + File "qemu/python/qemu/qmp/qmp_client.py", line 402, in _do_recv >> + msg_bytes = await self._readline() >> + File "qemu/python/qemu/qmp/protocol.py", line 968, in _readline >> + raise EOFError >> +EOFError >> + >> +The above exception was the direct cause of the following exception: >> + >> +Traceback (most recent call last): >> + File "qemu/tests/qemu-iotests/tests/stream-under-throttle", line 94, in tearDown >> + self.vm.shutdown() >> + File "qemu/python/qemu/machine/machine.py", line 583, in shutdown >> + self._do_shutdown(timeout) >> + File "qemu/python/qemu/machine/machine.py", line 557, in _do_shutdown >> + raise AbnormalShutdown("Could not perform graceful shutdown") \ >> +qemu.machine.machine.AbnormalShutdown: Could not perform graceful shutdown >> + >> ---------------------------------------------------------------------- >> Ran 1 tests > > > > > So with debugging I do get > +DEBUG:qemu.qmp.qmp_client.qemu-8015:<-- { > + "timestamp": { > + "seconds": 1670417504, > + "microseconds": 947655 > + }, > + "event": "GUEST_PANICKED", > + "data": { > + "action": "poweroff", > + "info": { > + "core": 0, > + "psw-addr": 0, > + "reason": "disabled-wait", > + "psw-mask": 562956395872256, > + "type": "s390" > + } > + } > +} > > > and I think the reason is, that we neither have a kernel or a bootable disk. As we do not have a BIOS then sitting around we stop the machine: > > The command line was > qemu-system-s390x -accel tcg -display none -vga none -chardev socket,id=mon,path=/tmp/tmp5kjtkwjn/qemu-8015-monitor.sock -mon chardev=mon,mode=control -qtest unix:path=/tmp/tmp5kjtkwjn/qemu-8015-qtest.sock -accel qtest -nodefaults -display none -accel qtest -object iothread,id=iothr0 -object throttle-group,id=thrgr-unlimited -object throttle-group,id=thrgr-limited,x-iops-total=10000,x-bps-total=104857600 -blockdev driver=throttle,node-name=throttled-node,throttle-group=thrgr-limited,file.driver=throttle,file.throttle-group=thrgr-unlimited,file.file.driver=qcow2,file.file.node-name=unthrottled-node,file.file.file.driver=file,file.file.file.filename=/home/cborntra/REPOS/qemu/build/tests/qemu-iotests/scratch/top.img -device virtio-blk,iothread=iothr0,drive=throttled-node' > > not sure what the right fix is. Maybe a minimal kernel that loads a wait PSW? CC-ing qemu-s390x This seems to help. --- a/tests/qemu-iotests/tests/stream-under-throttle +++ b/tests/qemu-iotests/tests/stream-under-throttle @@ -88,6 +88,9 @@ class TestStreamWithThrottle(iotests.QMPTestCase): 'x-iops-total=10000,x-bps-total=104857600') self.vm.add_blockdev(self.vm.qmp_to_opts(blockdev)) self.vm.add_device('virtio-blk,iothread=iothr0,drive=throttled-node') + + self.vm.add_args('-no-shutdown') + self.vm.launch() def tearDown(self) -> None: Will prepare a proper patch.
diff --git a/tests/qemu-iotests/tests/stream-under-throttle b/tests/qemu-iotests/tests/stream-under-throttle new file mode 100755 index 0000000000..8d2d9e1684 --- /dev/null +++ b/tests/qemu-iotests/tests/stream-under-throttle @@ -0,0 +1,121 @@ +#!/usr/bin/env python3 +# group: rw +# +# Test streaming with throttle nodes on top +# +# Copyright (C) 2022 Red Hat, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import asyncio +import os +from typing import List +import iotests +from iotests import qemu_img_create, qemu_io + + +image_size = 256 * 1024 * 1024 +base_img = os.path.join(iotests.test_dir, 'base.img') +top_img = os.path.join(iotests.test_dir, 'top.img') + + +class TcgVM(iotests.VM): + ''' + Variant of iotests.VM that uses -accel tcg. Simply using + iotests.VM.add_args('-accel', 'tcg') is not sufficient, because that will + put -accel qtest before -accel tcg, and -accel arguments are prioritized in + the order they appear. + ''' + @property + def _base_args(self) -> List[str]: + # Put -accel tcg first so it takes precedence + return ['-accel', 'tcg'] + super()._base_args + + +class TestStreamWithThrottle(iotests.QMPTestCase): + def setUp(self) -> None: + ''' + Create a simple backing chain between two images, write something to + the base image. Attach them to the VM underneath two throttle nodes, + one of which has actually no limits set, but the other does. Then put + a virtio-blk device on top. + This test configuration has been taken from + https://gitlab.com/qemu-project/qemu/-/issues/1215 + ''' + qemu_img_create('-f', iotests.imgfmt, base_img, str(image_size)) + qemu_img_create('-f', iotests.imgfmt, '-b', base_img, '-F', + iotests.imgfmt, top_img, str(image_size)) + + # Write something to stream + qemu_io(base_img, '-c', f'write 0 {image_size}') + + blockdev = { + 'driver': 'throttle', + 'node-name': 'throttled-node', + 'throttle-group': 'thrgr-limited', + 'file': { + 'driver': 'throttle', + 'throttle-group': 'thrgr-unlimited', + 'file': { + 'driver': iotests.imgfmt, + 'node-name': 'unthrottled-node', + 'file': { + 'driver': 'file', + 'filename': top_img + } + } + } + } + + # Issue 1215 is not reproducible in qtest mode, which is why we need to + # create an -accel tcg VM + self.vm = TcgVM() + self.vm.add_object('iothread,id=iothr0') + self.vm.add_object('throttle-group,id=thrgr-unlimited') + self.vm.add_object('throttle-group,id=thrgr-limited,' + 'x-iops-total=10000,x-bps-total=104857600') + self.vm.add_blockdev(self.vm.qmp_to_opts(blockdev)) + self.vm.add_device('virtio-blk,iothread=iothr0,drive=throttled-node') + self.vm.launch() + + def tearDown(self) -> None: + self.vm.shutdown() + os.remove(top_img) + os.remove(base_img) + + def test_stream(self) -> None: + ''' + Do a simple stream beneath the two throttle nodes. Should complete + with no problems. + ''' + result = self.vm.qmp('block-stream', + job_id='stream', + device='unthrottled-node') + self.assert_qmp(result, 'return', {}) + + # Should succeed and not time out + try: + self.vm.run_job('stream') + except asyncio.TimeoutError: + # VM may be stuck, kill it before tearDown() + self.vm.kill() + raise + + +if __name__ == '__main__': + # Must support backing images + iotests.main(supported_fmts=['qcow', 'qcow2', 'qed'], + supported_protocols=['file'], + required_fmts=['throttle']) diff --git a/tests/qemu-iotests/tests/stream-under-throttle.out b/tests/qemu-iotests/tests/stream-under-throttle.out new file mode 100644 index 0000000000..ae1213e6f8 --- /dev/null +++ b/tests/qemu-iotests/tests/stream-under-throttle.out @@ -0,0 +1,5 @@ +. +---------------------------------------------------------------------- +Ran 1 tests + +OK
Test streaming a base image into the top image underneath two throttle nodes. This was reported to make qemu 7.1 hang (https://gitlab.com/qemu-project/qemu/-/issues/1215), so this serves as a regression test. Signed-off-by: Hanna Reitz <hreitz@redhat.com> --- Based-on: <20221107151321.211175-1-hreitz@redhat.com> v1: https://lists.nongnu.org/archive/html/qemu-block/2022-11/msg00368.html v2: - Replace `asyncio.exceptions.TimeoutError` by `asyncio.TimeoutError`: Stefan reported that the CI does not recognize the former: https://lists.nongnu.org/archive/html/qemu-block/2022-11/msg00424.html As far as I understand, the latter was basically moved to become the former in Python 3.11, and an alias remains, so both are basically equivalent. I only have 3.10, though, where the documentation says that both are different, even though using either seems to work fine (i.e. both catch the timeout there). Not sure about previous versions, but the CI seems pretty certain about not knowing `asyncio.exceptions.TimeoutError`, so use `asyncio.TimeoutError` instead. (Even though that is deprecated in 3.11, but this is not the first place in the tree to use it, so it should not be too bad.) --- .../qemu-iotests/tests/stream-under-throttle | 121 ++++++++++++++++++ .../tests/stream-under-throttle.out | 5 + 2 files changed, 126 insertions(+) create mode 100755 tests/qemu-iotests/tests/stream-under-throttle create mode 100644 tests/qemu-iotests/tests/stream-under-throttle.out